How to make a collector for a warm floor yourself

Are you sick of chilly floors in the winter? Maintaining a warm and comfortable home can be greatly improved by installing a warm floor system. However, what if you could design a warm floor system on your own, without going over budget? A do-it-yourself collector can help with that. We’ll walk you through making your own collector for a heated floor in this guide, so you can have toasty toes without breaking the bank.

Let’s start by explaining what a collector is and why a warm floor system needs one. The collector, which is the central component of the system, circulates hot water via a system of pipes buried under your flooring. Heat is absorbed and dispersed by this water, warming your floors and your living area as a result. Although professional collectors can be expensive, you can save a lot of money and still have effective heating throughout your house if you build one yourself.

You may now be wondering what supplies you’ll need to begin building your own DIY collector. Fortunately, a lot of these materials are affordable and easily accessible. PEX tubing is usually required because it is strong and flexible, making it perfect for transporting hot water. In order to put everything together, you’ll also need a manifold to control the water flow, insulation to stop heat loss, and a variety of fittings and connectors. You’ll have everything you need to start building your warm floor collector with a trip to your neighborhood hardware store and a little creativity.

It’s important to comprehend your warm floor system’s layout before starting any building. Taking into account elements like your space’s dimensions, flooring type, and heating source location, you must decide where your collector will work best. Having the layout planned out in advance will guarantee effective heat distribution and assist you in avoiding any expensive errors later on. Spend some time measuring and planning your area, taking into account any potential obstructions or difficulties with installation.

The principle of the collector for warm floors

The collector is a component of the mixing-distribution unit; the heating system cannot function normally without it. Its objective:

• distribute the coolant;
• control the level of fluid heating.

The primary function of the node is to blend coolant from multiple heating systems with varying heating intensity (warm floor, radiator). The liquid is sent to the heating contours once it has been mixed to the required temperature for the hydropolis. The pump causes the cooled water stream to travel along the floor and then to the collector, where it mixes with hot water before being redirected to the floor.

Valves that adjust the volume of both hot and cold flows. Sensors measuring temperature are used for control.

This method of operation offers consistent and steady room heating.

Device

The feed and reverse block make up the collector, or crest. Every component starts with a big pipe that has side threaded outputs. Their quantity varies and is determined by the quantity of floor circuits.

The collector’s primary components are as follows:

• valves – two or three -way;
• valves – shut -off and balancing;
• thermal attemptor;
• manometer;
• pump to ensure water circulation;
• air vent;
• tees and connectors.

Types of collectors

Collectors vary in terms of production, features, and methods of adjustment.

In the mixing node, the water temperature is simultaneously changed, and its volume is manually adjusted just once. The system will continue to run on its own.

This device works best on an employee’s warm floor who needs extra heating.

With consumables

Using balancing flow meters is one way to modify the amount of water that is sent into the system’s loops. These valves control the flow of water.

The design consists of a rod with a flange that has a graduated window through which the water flow level in each circuit is measured. Adjusting the settings is done with the adjusting ring under the cap.

The most widely used view in warm floors is a device with consumables because it is reasonably priced and functions well.

With an automatic regulator

These days, the automatic collector is becoming more and more popular. It uses automatic control elements that use servo drives for each branch to regulate the coolant. He enables you to modify the fluid flow into each pipeline, beginning from the sensor temperature readings, in conjunction with a warm floor thermal attribute.

Automatic models are far more expensive than simple models. However, since owning this gadget makes it simple to maintain a comfortable environment in the home, these costs are justified.

Such a device must be installed and configured properly in order for it to operate to its full potential.

How to assemble a factory model of a collector?

When purchasing a comb, you have the option to select its staffing based on the connection scheme and your budget. The primary components of factory models are already put together, which speeds up the process of assembling the collector for the heated floor by hand. The assembly still needs the connecting hoses attached.

1. Determine the distance between fasteners. To do this, apply the mounting element to the crest and select the optimal distance for this design.

1. We fix the ending on the supply bar.

1. We take the end valve, wrap it on its threads – this is one of the compounds that needs to be packed and twist the adapter.

1. Unscrew the American on the tap, insert this element into the right side of the return plan. After that, with the help of an American, we fasten the tap in place.

1. We take the pump for the pump, unscrew the American, which we screw into the pipe on the left. Then the assault is screwed to the feed design.

1. We do the same manipulations with the second burning, only fasten it to the return bar.

1. Pack the three -lended valve for the thermostatic head. To do this, the package is also wound on the thread, the valve is screwed into the back of the reverse block on the left.

1. Connect the circulation pump between the input and output slices.

1. We twist the head from the valve, put on its place the thermogol. And we put the sensor from it in the feed pipe.

1. Tighten all the connections with the key.
2. We connect the floor pipes using the European Council to the finished crest.

Steel and plastic sections are used to make collectors. When assembling a plastic product on its own, the compounds must be carefully tightened.

How to make a collector for a warm floor with your own hands?

It’s simple to gather a collector for warm hydropolis by hand. But we have to do the calculations and become acquainted with how it operates beforehand.

These common details are things you can make yourself into a collector. The warm floor comprises locking reinforcements, a pump, and a three- or two-way crane in addition to the comb.

Assembly

Creating a collector by hand is a straightforward endeavor. Polypropylene components must be soldered by checking for tightness when using them.

If the details are made of steel, you will require welding expertise. Furthermore, the metal collector needs to be shielded from the effects of corrosion, which calls for painting or priming.

The procedure for creating a polypropylene comb by hand

1. We weld the supply unit – we take PPU pipe 32 mm in size and tees of the same diameter. The number of tees depends on the number of floor circuits. First we measure the depth of the pipe entry into the tee, and put the label. Using a soldering iron for polypropylene products, we solder the pipe with a tee.

1. We measure from the tee of the pipeline the distance of the pipe call into the tee, which we measured earlier. On the marked line we make a piece of pipe and clean the edges.

1. We solder the clutch with the crane to the lower output of the tee.

1. We repeat the prescribed operations with the second tee above. We weld the resulting part to the first workpiece. The number of such blanks depends on the number of warm floor circuits.

1. We solder the tee, on which we will place the air vent at one end, and on the other with a ball of a global drain crane to one edge.
2. Flow the ball valve, install the air sprayer.

1. By this principle, we make a return rowing. Only instead of ball valves, on the pipes we place adjusting valves.

1. We fix the prepared combs (feed and return), on the fastener bracket.

The coolant will continue to flow if this node for the heated floor is fixed, connected to a power source, and connected to a circulation pump.

Do you want to maintain a warm and energy-efficient home? Explore the world of insulation and heating with our in-depth guide. We provide everything you need, from professional advice to easy do-it-yourself fixes. We’ll concentrate on a crucial topic in this article: building your own radiant floor heating system. Warmth that comes from the ground up is here to stay, so say goodbye to cold toes! We’ll provide you with clear instructions and useful guidance as you construct a collector for your warm floor. Whether you’re a novice homeowner or an experienced do-it-yourselfer, you can find all the information you need to get started right here. Together, let’s reduce your energy costs and heat your floors!

Features of the operation of homemade collectors

The operation of the collector is straightforward if it is constructed and connected correctly, as it automatically adjusts the temperature and distributes water throughout the contours. Nonetheless, it is advised to carry out testing on a regular basis as a preventative measure, which comprises:

• verification of the performance of all sections of the distribution unit;
• monitoring the tightness of the compounds in order to exclude possible leaks;
• clarification of the indicators of the coolant in each loop is the degree of maximum heating, and the time for achieving this degree.

It’s also important to make sure the temperature matches the designated indicators. This is accomplished by setting a specific temperature and routinely removing thermometer indicators.

Materials Needed	Steps to Build
PEX tubing, plywood, insulation foam, aluminum heat transfer plates, manifold, pipe fittings, screws	1. Measure and cut plywood to desired size for the collector base. 2. Lay insulation foam on top of plywood. 3. Arrange PEX tubing in a serpentine pattern on top of insulation. 4. Secure tubing with aluminum heat transfer plates. 5. Connect tubing to manifold using pipe fittings. 6. Attach manifold to collector base. 7. Test system for leaks before installing in the floor.

Installing a radiant floor heating system is a great way to save energy costs and create a warm and inviting atmosphere in your house. What could be better? You can save money and have the satisfaction of a do-it-yourself project by making a collector for a warm floor yourself.

It is possible to efficiently design and assemble a collector for your warm floor system by following the instructions provided in this guide. With the correct equipment and a little perseverance, DIY projects can be completed by anyone, experienced or novice.

Always prioritize safety before anything else when working on home improvement projects. Observe all safety precautions and seek professional advice when necessary, particularly when working with electrical or plumbing components.

You will be able to take advantage of reliable, effective heating throughout your house once your collector is installed and your warm floor system is operating. Bid farewell to cold toes and hello to a cozy living area!

Video on the topic

DIY

A collector for warm floor – with your own hands!!!

Homemade comb. Warm floor, heating, plumbing. Budget comb. Collector.

How to make a warm floor without a pump, mixing unit and collector. Multibox

A collector for a warm floor with your own hands with polypropylene….

A collector for a warm floor with your own hands cheap

DIY