Gas warm floor

During the colder months, finding effective heating solutions is essential to keeping our homes cozy. The gas warm floor system is one novel technique that is becoming more and more well-liked. In contrast to conventional heating techniques that depend on forced air or radiators, gas warm floors provide a more uniform and cozy warmth throughout the room.

What precisely is a gas warm floor, then? In essence, it’s a heating system that works with a system of pipes that are buried beneath the floor. These pipes transport hot water or a mixture of glycol that has been heated by a gas boiler. The warm water radiates heat upwards through the pipes, warming the floor and, in turn, the entire space.

Efficiency is one of the main advantages of a gas warm floor system. Lower water temperatures are needed to provide the same amount of warmth because the heat is released from the entire floor surface rather than from a few concentrated spots like radiators. This results in less energy being used, which eventually results in cheaper heating costs.

The capacity of gas warm floors to deliver steady, even heating is another benefit. It’s typical to have temperature fluctuations in a room when using traditional heating methods, with some parts feeling overly heated and others feeling cold. These variations are eliminated by gas heated floors, which results in a cozy atmosphere throughout.

Additionally, gas warm floors give you even more interior design options. The space can be furnished and decorated more freely because there is no need for large radiators or ductwork because the heating elements are hidden beneath the floor. The visual appeal of any space can be improved by this flawless integration.

In the quest for efficient heating solutions, gas warm floors emerge as a promising option for homeowners. This innovative system utilizes natural gas to heat the floors, spreading warmth evenly throughout the house. Unlike traditional radiators, gas warm floors provide a comfortable and consistent temperature without the need for bulky equipment taking up space. They offer energy efficiency and cost savings, as gas is often more affordable than electricity. Moreover, gas warm floors contribute to better indoor air quality by reducing dust circulation, making them not only practical but also beneficial for health. With their easy installation and minimal maintenance requirements, gas warm floors present a compelling solution for enhancing comfort and sustainability in homes.

Gas boiler for heating system "Warm floor"

The "warm floor" system is a very practical and effective way to heat your home.

It is a coil that is hidden beneath the floor covering.

This system is very expensive despite its many comforts.

How to calculate the power of the boiler

You need to calculate heat loss in order to find a boiler that is suitable by power. For computations, a boiler power of 2 kW per 10 m^2 of the room’s area is typically assumed, with a 2.5 m height.

Boiler with gas for "warm floors"

Why is it necessary to use a gas boiler specifically to ensure a "warm floor"? This is due to a few factors:

  • Gas is available fuel.
  • Gas boilers are very convenient to operate.
  • The possibility of using gas boilers in the apartment.

However, the condensation gas boiler’s design features are the primary cause. Let’s examine the two primary varieties of gas boilers to clarify what this is about:

  • Convection gas boiler is a boiler of a traditional model. It includes one heat exchanger. Heating occurs due to heat release during gas combustion. Such a boiler is convenient, practical, and also has a low price.
  • The condensation boiler is the same convection boiler, only modernized. That is, he has all the same qualities, but in addition it has its advantages.

The coolant is heated further as a result of the additional heat exchanger (economizer). Near the boiler’s combustion product output is where the economizer is situated. The water vapor’s hidden energy, which is present in the chimney, causes heating. The heat exchanger’s walls allow the condensed steam to transfer its energy to the coolant.

As a result, the condensation boiler outperforms convection by 15% in terms of useful coefficient (efficiency).

The water in the heat exchanger must be as cold as possible in order for the process of condensation of water vapor on the heat exchanger walls to occur more intensely. The ideal temperature is 400 degrees Celsius.

The process of condensation and "warm floor"

The instructions state that serving cold water in a functioning boiler is not permitted since it may negatively impact the heat exchanger’s longevity; however, this restriction only applies to convection boilers. There won’t be any temperature skew with a capacitance boiler because the cold water will reach the ideal temperature beforehand in the economizer. The primary heat exchanger will receive heated water.

The condensation boiler will simply lose all of its benefits if there is not enough water supplied to it because no steam will condense, which prevents the coolant from being heated. As a result, the back line water needs to cool as much as feasible. We’ll be helped with this by warm floors.

Heating "Warm floors"

It turns out that in addition to being free, the heating system’s "warm floor" is required in order to reduce the temperature in the reverse line when utilizing the condensation boiler. a type of unintended consequence of the primary heating system.

Warm flooring characteristics

The floors will heat up nearly as much as the radiators if water from heating radiators beneath the floor is in the coils beneath the floor; this is an excessive amount of heat. This distinguishes "warm sexes" from conventional heating. The recommended range for their nominal feed temperature is 40–450C. How can this requirement be met?

This problem’s solution has an extremely straightforward design. The shooter is called a hydraulic one. It’s a tank for vertical storage. Water from both reverse and straight lines is gathered in this tank. The laws of physics state that hot water will collect in the upper section of the tank and cold water in the lower.

How to put in a gas boiler in a warm-floor apartment

It is best to leave gas boiler installation to the professionals. Additionally, you must adhere to all guidelines outlined in the instructions if it is made independently. The boiler’s cauldron needs to be constructed in line with the drawing. Use only factory parts and seals to join pipelines.

The heating system only needs to be installed correctly and connected to the boiler on one side and the heating system on the other. The heating system should already be mounted.

You must install two collectors, one in a straight line and the other in reverse, to guarantee that the coolant is distributed uniformly between the heating contours. Install shut-off valves at each collector exit to enable the individual contours to be turned off.

The hydraulic shootout features multiple outputs situated at varying elevations:

  • The highest output is the supply to the main heating system. Thus, radiators are consumers of water with the highest temperature.
  • The lower outputs give out a coolant with lower temperature, it is sent to the "warm floors".
  • The reverse lines of the “warm floors” and the heating radiators are cut into the lower point of the hydraulic rifle, at the same level there is a foam of cooled water onto the condensation boiler.
  • To ensure a more accurate control of the temperature to each circuit of the “warm floors”, its circulation pump is set, which automatically adjusts the speed of the coolant.

Using a hydraulic rifle and two collectors, the figure illustrates the heating scheme in detail from multiple heating contours.

If you look in the direction of the coolant movement, the collectors are installed on the "return" and after a hydraulic shotgun at the supply.

The best choice for heating with a "warm floor" will be a gas double-circuit boiler operating in suspended function with forced traction.

This model works well in an apartment as well as a medium-sized private home. All that is left is to make sure the combustion products are removed. A traditional brick gas wrap is used in place of a coaxial pipe for a gas boiler with a closed firebox. As a result, installing the unit is feasible even without a special gas.

How to figure out a gas boiler’s power for "warm floor." How to connect a warm floor to the system and install a gas boiler.

Which is more profitable: gas warm floor or electric

  • Which is more profitable: gas warm floor or electric
  • Where to put a temperature sensor
  • What heating is best carried out in a private two -story house

Water warm floor

In the water floor system, hot water serves as a source of heating, which passes through the pipes laid in the floor. In apartments, it can be water from central heating or a separate riser, which is provided in modern new buildings. An essential condition providing the necessary heating is the temperature of the coolant-it should be 70-90 ° C. This temperature cannot always provide central heating of city apartments. In addition, the unauthorized insertion of the “warm floor” system is prohibited, since it lowers the pressure in the hot water supply system and reduces the working temperature of heating radiators in other apartments. To maintain circulation in this case, it will be necessary to install an additional water pump.

Electric warm floors

Electric heated floors are currently available from manufacturers in three varieties: resistive, carbon thermomes, and infrared. The latter is based on a self-regulating cable. Owing to their design elements, installation technique, and thermoregulation, these floors can be used as the primary source of heat or simply to raise the comfort level in the space.

Which is more profitable, an electric or gas heated floor? Here are some helpful installation tips for an electric heated floor.

👍 Installed in both new and old homes and apartments, the "warm floor" heating system is no longer merely an unusual curiosity.

Warm floor from a gas boiler

Heating problems are often difficult to resolve in rural homes because centralized city communications are unreachable and unconnectable.

You can install a warm flooring system to maximize heat consumption and comfort levels during heating. More sensible distribution and control of thermal flows within the home will be possible with the help of artificial heating. Warm floors from the water It only takes a few minutes for gas boilers to warm up.

The advantage of gas boilers

It is important to remember that there are various kinds of hot water units, with gas being the most common.

When comparing these boilers to electric and solid fuel units, the functionality and economy indicators are the best.

The following are a few of the benefits.

  1. High -action coefficient. Energy return significantly exceeds consumption.
  2. Relatively cheap fuel. Compared to other sources of energy, gas is quite profitable.
  3. Continuous gas supply in modern boilers allows you not to waste time control over the flame, unlike solid -fuel units. If the gas stops acting, the automatic system signals this, and also independently turns on the function of the electric ignition to light the flame again.
  4. Gas boilers are able to heat very large houses. This type of equipment is also applicable on an industrial scale, so for a country house you can choose the best option depending on the total area of the building.
  5. A wide range of modern units allows you to choose the optimal boiler optimal in cost, design and technical characteristics without any difficulties.

The ideal solution for a warm floor and the entire heating system is a gas water heating boiler.

It enables you to use gas fuel efficiently, generating the least amount of heat energy from it.

Varieties of gas boilers

There are two main types of gas water heaters.

  1. Convection boiler, it is also traditional. In it, water heats up only from the combustion of gas in the furnace. This is the easiest type of water heaters, which in its device is similar to boilers on other types of fuel.
  2. Condensation boiler. This unit is installed by an economizer, which allows additionally heating water due to condensate of outgoing gases in addition to heating water in the firebox. The efficiency of such a boiler is very high, since the loss of thermal energy from the combustion product is minimized.

The following varieties can be identified based on additional features.

  1. By the number of contours.
  2. By the method of ignition.
  3. By the method of removing combustion products.
  4. On the execution of the economizer in condensation boilers.

In daily life, double-circuit boilers are more convenient.

The quantity of contours in the unit is crucial when assessing other parameters.

Boilers with a single circuit can be utilized for hot water supply or heating purposes.

One unit can heat the house and provide hot water thanks to a double-circuit setup.

Warm floor boilers should be just as dependable and built for this extra kind of heating during the winter, when demand is at its highest.

Connection of a warm floor system to a hot water boiler

The choice of a warm floor boiler should be based on operating conditions and power. It is challenging to perform accurate calculations on your own since you will need to assess indicators like the building’s overall heat loss, resistance to the cold, and other parameters.

You can seek assistance from experts who will determine which boiler is best for you based on the building’s features, the parameters of the water supply and heating systems, and calculations.

It is very easy to connect a hot water boiler to a warm flooring system. A mesh filter, a safety valve, an expansion tank, and a circulation pump are among the equipment types that come with the kit, which makes the process easier if a gas unit is chosen.

The kit for the artificially controlled heating system includes a collector known as the "comb," to which all of the warm floor’s pipelines are connected, as well as shut-off valves in the shape of ball valves.

The types of warm floor laying are also shown, along with the connection diagram between a hotel boiler and the warm floor.

Verify that every connection is tight by running the system tests.

It is crucial to check the tightness of all connected components during installation. Crimping the system will allow you to verify its dependability. It is carried out using cold, non-heated water.

The system is pressurized, and every part of it is checked to see if there are any water droplets or just moisture. This process needs to be completed before their device because the warm floor is concealed beneath layers of finish flooring and screed.

In essence, when heating and hot water supply pipelines are delivered to the hotel boiler at the same time as the warm floor, more intricate connection schemes are used.

They are all predicated on collectors that join pipelines into a single segment and guide it along the necessary contour.

The heating and warm floor are integrated into the general section and routed through a different pipeline, while the hot water supply system follows a different contour. As a result, flows in double-circuit boilers are distributed.

It is essential to understand that the warm flooring system should only be installed in the parts of the rooms’ floors where heavy furniture and appliances cannot be installed.

Will also save costs and ensure that the right equipment is chosen. After making quality calculations and installations, you can take pleasure in the results of your labor for many years to come in a cozy and well-built home.

This type of heating will make it easier to control and distribute heat throughout the house. Gas boilers for warm floors can heat up quickly—in just a few minutes.

Advantages Disadvantages
Efficient heating Initial installation cost
Even heat distribution Requires professional installation
Compatible with various floor coverings Dependent on gas supply

For homes, gas warm floors provide an effective and cozy heating option, especially in areas where natural gas is available. The system distributes heat throughout the room uniformly by running warm water through pipes buried beneath the floor. This technique does away with the need for large, obtrusive radiators or obvious heating components while still providing constant warmth.

The energy efficiency of gas warm floors is one of their main benefits. With the help of natural gas, which is a widely accessible and reasonably priced fuel source, these systems can efficiently heat a home while keeping energy expenses under control. Furthermore, when compared to conventional heating techniques, the radiant heat generated by the floor facilitates improved energy distribution and lowers total energy consumption.

The capacity of gas warm floors to produce a cozier living space is another advantage. In contrast to forced-air systems, which may cause inconsistent temperature and the spread of allergens and dust, radiant floor heating offers even warmth from the floor up. This keeps the indoor air quality better and reduces drafts in addition to creating a cozy atmosphere.

Additionally, gas warm floors give homeowners more options for layout and spatial organization. Wall space for radiators or baseboard heaters does not need to be sacrificed because the heating elements are hidden beneath the floor. This makes it possible to use the available square footage more effectively and presents opportunities for more imaginative interior design options.

To sum up, gas warm floors are a great choice for homeowners looking for economical, cozy, and visually appealing heating options. These systems provide many benefits for improving the comfort and livability of any home, thanks to their reliability in heating, energy efficiency, and adaptability in design.

Video on the topic

Water warm floor directly from the boiler and gas consumption for the year

Gas consumption for heating. Is it expensive to heat the house with a warm floor

What type of heating you would like to have in your home?
Share to friends
Michael Kuznetsov

I love to create beauty and comfort with my own hands. In my articles I share tips on warming the house and repairing with my own hands.

Rate author
Add a comment