5 best ionic boilers: device, installation and strapping

Efficient heating of your house not only keeps you warm in the winter but also lowers energy costs and lessens your carbon footprint. Ionic boilers are unique among heating systems because of their cutting-edge technology and capacity to save energy. This post delves into the world of ionic boilers, examining how they operate, how to install them, and how to incorporate them into your home’s heating system.

Let’s first examine the differences between ionic and conventional boilers. Ionic boilers work by employing an ionic exchange process, as opposed to conventional boilers, which depend on burning fossil fuels like gas or oil. By utilizing the power of ions to produce heat, they are not only more environmentally friendly but also more effective at transforming energy into heat for your house.

You may be wondering how these boilers can be integrated into your home and how the installation process works. The process of installing an ionic boiler is comparable to that of traditional boilers, although there are some distinctions because of their distinct technology. A qualified heating engineer will normally evaluate the heating requirements of your house, choose the right boiler size and location, and then carry out the installation.

Strapping, or the pipework and fittings needed to connect the boiler to your home’s heating system, is one of the most important factors to take into account when installing an ionic boiler. When the boiler is strapped properly, it will function safely and effectively, providing heat to every part of your house without leaking or inefficiently using energy. In order to get the most out of your ionic boiler and make sure it works well with your current heating system, you must take this step.

After discussing the fundamentals of ionic boilers, let’s examine five of the top models on the market. We will examine the characteristics of every boiler, their installation needs, and their relative performance and efficiency. These top-rated ionic boilers provide comfort, energy savings, and dependability for you and your family, whether you’re looking to install a new heating system in your home or upgrade your old one.

History of ionic boilers

The first flow-modifying ionic heating boilers were installed in military installations to heat USSR Navy ships and submarines. Following the fall of the Soviet Union in the 1990s, the technology was declassified.

The Russian company CJSC "GALAN" was involved in the development of this boiler design. GALAN, the first ionic boiler to be produced in serial form, was introduced in 1994.

The model has been successfully developed for 20 years, during which time the materials and design features have evolved. The automation known as "Kros" expanded the range of applications for ionic boilers by enabling the device to function with water of any quality.

High efficiency domestic heating boilers are ensured by "Kros," which is adjusted during initial startup and then functions steadily, automatically adjusting to the actual quality of the coolant.

There are only technical condition indicators on the panel because the operation process does not require manual control.

The boiler can operate in the "Smart House" system and has good integration with external climate control units and DSM control.

Advantages and disadvantages

There is a lot of conflicting information regarding how ionic boilers work in the technical literature. However, compared to similar heating devices that run on electricity, the achieved technological parameters of the operation of such a heating system speak of significant advantages:

  1. The highest level of efficiency efficiency 90-98%, higher than conventional FET designs.
  2. High speed of output of ionic heating boilers on working capacity.
  3. Small size and weight, which simplifies the piping of the ion boiler.
  4. There is no need to install a smoke ventilation system in the house. heated room.
  5. No overheating and no coolant leakage.
  6. Voltage fluctuations in the network, slightly reduce the power of ionic heating boilers, but it does not stop the process of heating the coolant.
  7. Can be placed in the heating circuit with a traditional boiler unit operating on any fuel as an additional source of heating at night or during peak hours of load.
  8. It is allowed cascade installation of several ionic units with step-by-step regulation of heating power.
  9. With proper utilization of waste heat transfer fluid, ionic boilers – absolutely no threat to the environment.
  10. They have low cost in comparison with traditional units.

The drawbacks of ionic boiler systems:

  1. Specific parameters on the quality of the heating medium.
  2. Not all heating appliances can be paired with ion electrode boilers. Specialists recommend using bimetallic or aluminum batteries. The latter must not contain oxides, which can change the chemical composition of the electrolyte and unbalance the entire system.
  3. High electrical grounding requirement.
  4. Limitation on the limit temperature – up to 70 C.
  5. Electrodes are soon enough covered with scale and require periodic replacement.
  6. Unacceptable to work in the DHW heating circuit.

Do you want to improve the heating system in your house? Explore the realm of ionic boilers! We’ll take you through the top five ionic boilers in our in-depth guide, covering everything from setup and installation to basic operation. Knowing the device, the installation procedure, and the required accessories will help you make the best decision for your house, regardless of whether you’re an experienced do-it-yourselfer or you’re looking for professional assistance. Let’s examine how these cutting-edge boilers operate, what to take into account when installing them, and how to maximize their efficiency for effective insulation and heating.

Device and technical characteristics

Since this technique of instantly heating the coolant has been around for several decades, many companies are currently producing models. The only real differences between the designs are in the small details.

The electrical switching unit is typically housed in a cylinder that is positioned vertically and has a wide bottom section. The design calls for two connections for supply and return coolant.

The device has electrodes installed within. One electrode is used in the center when operating in a 220 V line, and three insulated electrodes made of special alloys are used in a 360 V line, and they are secured with protected polyamide nuts.

Furthermore, the construction consists of:

  • control unit;
  • control unit controller
  • protection against low quality voltage;
  • power and ground terminals;
  • rubber gaskets for insulation
  • insulating.

Typical features of a home ion boiler unit include:

  • diameter of the electrode boiler – up to 300-350 mm;
  • length – approximately 600 mm;
  • the weight of one unit is from 10 to 12 kg;
  • heat capacity from 2.0 to 55.0 kW.

An indispensable component of the ionic boiler unit is a special coolant, which must necessarily meet the conditions specified by the manufacturer"s technical instructions.

How to choose an ion boiler

Given that 1 kW of thermal capacity is adequate to heat a 10 m2 area, choose the necessary unit in terms of capacity. To account for the object’s heat losses, add about 20% extra to the computation.

Prior to making a decision, it’s also important to ascertain whether it will serve as the primary source of heat or as a backup to keep the temperature stable at night or during exceptionally cold outdoor temperatures.

It must also consider whether the electrical load is 220V or 380V, as well as the potential that the boiler was not powered by the home electrical network. The heating plan must be considered when selecting a specific model; therefore, if the home has a "warm floor" system, the boiler output should be chosen 30% higher.

Best manufacturers

Ionic boilers continue to be highly sought-after heat supply options in the Russian market because of their benefits.

In addition to several local factories, there are also models made by Western producers.

A broad summary of the most well-known brands:

  1. "Galan", boiler unit of the Moscow company. The firm produces several basic models in the network 220 V:" Hearth", " Turbo" и" Geyser", and 380 V network" Vulkan". To the devices will need to buy a basic control unit" Navigator", ABB circuit breaker, thermoregulator "BeeRT", controlling the capacity of the circulation pump.
  2. Electrode ionic boilers Beryl, Russian manufacturer, are produced in 2 sizes for 220/380 V network and respectively with power of 9/33 kW. It has a top installation of the power supply unit, which simplifies installation and maintenance. It is necessary to additionally purchase a block of CSU "Euro", which allows you to perform step-by-step control of the heating capacity of the coolant, every 200W.
  3. Electrode boilers of EOU brand of domestic manufacturer, with power range from 2 to 120 kW, in the network 220/380 V.
  4. "Forsazh" Ukrainian manufacturer, equipped with a special protective casing, increasing safe operation, having a designer appearance. It is represented by 5 modifications for 220 V network, power from 3.0 to 20 kW, which are equipped with ECRT control unit.
  5. STAFOR, a Latvian manufacturer, complies with EU requirements. The design has a number of innovative solutions, including the use of a "Faraday cage" with safety and operating zero distribution. Together with it is possible to buy a branded coolant and a specialized additive STATERM POWER, which allows you to make timely adjustments to the chemical composition of the electrolyte to regulate the efficiency of the boiler.
Boiler Model Key Features
EcoSmart ECO 11 Compact design, energy-efficient, easy installation
Rheem RTEX-18 Durable, digital temperature control, self-modulating power control
Stiebel Eltron Tempra Plus Advanced flow control, silent operation, sleek design
Takagi T-H3-DV-N High flow rate, ultra-efficient, precise temperature control
Eemax EEM24018 Instant hot water, space-saving, reliable performance

Making the switch to an ionic boiler will greatly increase your home heating system’s sustainability and efficiency. These boilers, with their cutting-edge technology, have many advantages over conventional models, including lower emissions and more energy efficiency. Homeowners can choose to install ionic boilers in their homes with knowledge of the device, installation procedure, and required strapping.

Ionic boilers’ unique design, which uses ions to heat water rather than fuel, is one of its main advantages. This makes them a more environmentally friendly option for homeowners who care about the environment because it not only lowers carbon emissions but also minimizes energy waste. Ionic boilers also frequently take up less room in your house than conventional models, which is a benefit.

Working with a certified professional during installation is essential to guaranteeing best performance and safety. Assessing the heating requirements of your house, choosing the right boiler size, and smoothly integrating it into your current system are all necessary for a proper installation. You can steer clear of possible problems and take pleasure in dependable heating throughout your house by giving this task to professionals.

Appropriate strapping is necessary to optimize the performance and lifespan of your ionic boiler in addition to installation. This entails fastening the boiler firmly in position and attaching the required electrical and plumbing parts. Strapping minimizes the possibility of malfunctions or breakdowns by ensuring that your boiler runs smoothly and efficiently with painstaking attention to detail.

To sum up, your experience with home heating can be completely transformed by purchasing one of the best ionic boilers available. Contemporary homeowners can benefit from a sustainable solution provided by these boilers due to their advanced technology, efficient operation, and environmental benefits. Gaining a comprehensive understanding of the device, installation procedure, and strapping requirements can help you fully utilize ionic boilers and take advantage of years of comfortable, cost-effective heating in your house.

Video on the topic

Rating of the top 5 electric heating boilers | Best in 2024

Ranking of the top 5 gas wall mounted heating boilers | Best single circuit and with DHW in 2024

Best electric boiler 2024 for the price-performance ratio

✅ 5 best gas wall mounted boilers

The best heating boilers according to buyers | TOP 5 boilers

TOP useless solutions in home heating that many people dream about!

What type of heating you would like to have in your home?
Share to friends
Sergey Ivanov

I like to help people create comfort and comfort in their homes. I share my experience and knowledge in articles so that you can make the right choice of a heating and insulation system for your home.

Rate author
Add a comment