Infrared industrial ceiling heaters

Selecting the ideal heating solution is essential for maintaining a warm and comfortable home, particularly in the winter months. In addition to providing several advantages, infrared industrial ceiling heaters have become a well-liked option for effectively heating spaces in recent years. Infrared heaters operate by radiating radiant heat straight onto objects and people within the room, as opposed to conventional heating techniques that rely on convection to warm the air.

The capacity of infrared industrial ceiling heaters to deliver precise and concentrated heating is one of their most notable qualities. Instead of wasting energy heating the air, these heaters warm objects and surfaces within their range by emitting infrared radiation. This focused approach lowers energy consumption and heating expenses while also ensuring a more comfortable environment.

Installing infrared industrial ceiling heaters also has a lot of benefits in terms of saving space. Ceiling-mounted infrared heaters are inconspicuous and free up floor space for other uses, in contrast to large, bulky traditional heaters. This makes them the perfect option for large residential spaces where maximizing floor space is crucial, as well as industrial settings, warehouses, and garages.

The adaptability and versatility of infrared industrial ceiling heaters to various environments is another important advantage. These heaters come in different sizes and power outputs to accommodate different needs, whether you need to heat a small workshop or a large warehouse. Furthermore, a lot of models have movable settings that let users adjust the heat output’s intensity to suit their needs.

Industrial and commercial infrared heaters

What is the difference between household infrared heaters and industrial infrared heaters?

The capacity is the primary distinction between home and industrial heaters. Domestic models typically have a maximum power of 1500 watts. The industrial ones begin at 2000 W. Considering that industrial spaces typically have a larger footprint, it makes more financial sense to buy fewer, more potent heaters to heat them. Furthermore, since industrial spaces typically have high ceilings, installing high-wattage heaters is feasible without sacrificing comfort. These heaters will be scorching hot in low-lying residential areas, much like the sun.

Industrial heaters are also more practical. For them, quietness and appearance are not as important as dependability and durability. Because of this, when in use, infrared industrial heaters frequently have a rough appearance and may even crackle. Thermo Glass heaters are the one exception to this rule. Other than size and power, they are identical to their domestic counterparts.

What are industrial infrared heaters?

Globally, industrial infrared heaters can be divided into heaters with closed TEN and open TEN. TEN stands for Tube Electric Heater. In heaters with a closed TEN, this element is installed inside the body on an aluminum heat-emitting plate, which it heats to temperatures of about 200-250 degrees Celsius. In heaters with an open TEN, TEN can be seen. It heats up to about 700 degrees and begins to glow with red color. The heat from it is directed to one side by a reflector. Glass heaters do not have a TEG, they are heated by means of a conductive spray on the glass. But ideologically they can be referred to heaters with a closed TEG, as their surface is not heated to more than 250 degrees Celsius.

For heating insulated, unventilated rooms, heaters with a closed TEN are used. Any space can be made warm by adding multiple heaters to the room. It is more appropriate to use heaters with an open TEN if the room is frequently blown out (e.g., car washes, where the gate is frequently opened) or if there are numerous drafts in the space. They can heat a space more quickly and with greater concentrated heat production. If the ceiling is extremely high, it is also better to use heaters with an open TEN (about 10 meters and higher)

Why are industrial infrared heaters made the way they are?

For both commercial and residential applications, large spaces with high ceilings can be heated using infrared industrial heaters. The following is a brief summary of locations that utilize industrial infrared heaters: factories, warehouses, car washes, shopping centers, industrial greenhouses, cowsheds, chicken farms, etc. The United States makes up the majority of the states where this brand is commonly used. д.

The Industrial Heaters’ Range?

Only the most widely used models are shown in this section. Our selection of industrial heaters is actually far wider. Additional models are available in the manufacturer-specific sections as well as other parts of the website.

The best manufacturers of industrial heaters are available in our store at factory prices. Our managers will expertly counsel you and assist you in selecting the ideal heater model.

The store sells industrial infrared heaters under different brands and manufacturers, and you can purchase them at factory prices.

Gas industrial infrared heaters

The company Aerostandart has been professionally involved in the supply of industrial gas infrared heaters throughout Russia for over 7 years, having worked in the thermal equipment market.

Recently, many people have become aware of the high efficiency, rapid payback, low maintenance costs, and ease of use of gas infrared equipment. This is especially true for large enterprises with expansive production areas that require a lot of resources to heat.

For this reason, our organization spends a great deal of time researching new gas infrared heat equipment that hits the market, carefully examining it, and only purchasing and delivering it to the Russian market once we are certain that the equipment is of the highest caliber.

The Aerostandard company has gained the trust of numerous large enterprises by only presenting high-quality equipment on the market, and these enterprises have since become regular customers.

Industrial gas infrared heaters are the best option for high heat loads and volumes. Industrial gas heaters are sold, calculated, and installed by Aerostandard. 8-800-333-11-02

Advantages and selection criteria for ceiling infrared heaters

One of the most widely used forms of additional heating is infrared heaters. They are essential in the off-season when central heating isn’t yet operational and for pipeline repairs and accidents. Infrared ceiling heaters offer year-round thermal comfort in the home. Contemporary climate technology is affordable, safe, adaptable to any kind of space, and, with proper use, long-lasting. You must comprehend the various kinds and characteristics of infrared devices in order to choose an appropriate heater for a given space.

Why it is worth choosing exactly the ceiling model

It is clear that convection and infrared heating differ fundamentally in that the former heats the air masses in the space while the latter heats people, objects, and both in turn, the air. It is crucial to locate the heater in a way that will best serve the needs of the room’s specific occupant because the thermal comfort zone can vary depending on the location.

Differentiate between these models:

Although the thermal comfort zone of wall and floor models is relatively small, they are effective.

The wall-mounted device provides warmth to objects, the wall across from it, and the floor, but only to a limited extent. The issue of extending the temperature comfort zone is resolved automatically when the device is mounted on the ceiling; a sizable area is heated. The room has an even distribution of heat energy. The air masses receive heat from the floor and other heated objects. There is minimal temperature difference between the ceiling and the floor, allowing for optimal energy savings.

Which emitters are used in infrared heaters

In terms of structure, infrared heaters are similar. They are all composed of emitters and reflectors, with the latter being composed of metal resistant to heat. variations in the wavelength and the materials used to make emitters.

The emitter’s wavelength

Radiators may be:

The radiating surface’s temperature determines the wavelength. The radiation is more aggressive the shorter it is. Heaters with a maximum temperature of 600 degrees can swiftly warm up sizable open and semi-open spaces. Usually, these are industrial infrared heaters mounted on ceilings. They are used to create comfortable working spaces in hangars, garages, and workshops. If dachas need to be heated quickly and effectively, these units can be installed. Long-wave radiator models are better for homes because they provide softer, safer, and more comfortable heat.

Supplies needed to make the emitters

There is a differentiation between these emitters:

Every kind of appliance has benefits of its own:

  • Quartz attracts a relatively low price;
  • Metal heaters are durable;
  • Incoloy – resistance to corrosion;
  • Ceramic – with good operational properties;
  • carbon – economical;
  • film – special soft and comfortable heat.

Gas or electricity are typically used as the energy source for radiators.

IR ceiling heater capacity calculation

1 kW is the standard IR heater power calculation per 10 square meters. This makes it possible to offset heat losses through walls, ceilings, doors, and windows, but it shouldn’t be regarded as gospel; instead, it’s best to be safe and select a gadget with a modest power reserve. By doing this, you can make up for heat loss via doors, windows, walls, and ceilings. The power should be computed using the standard of 1.3 kW per 10 square meters if the model is chosen to heat a home in which no one lives permanently.

Kindly take note! Experts advise selecting heaters with a marginally larger capacity at all times. It is unreasonable to assume that a less potent appliance will heat the space just as well but for a longer amount of time. Place the gadgets closest to doors, windows, and the coldest spots.

A room larger than 15 square meters will require two 1 kW ceiling heaters to be heated. The devices are positioned so that each device’s zone of influence and its heat influence overlap. Achieving an even and sensible distribution of heat throughout the room is possible in this way.

Additionally, the ceiling heights must be considered. Less than 2.5 meters indicates that the waves are more rigid and the rays are not sufficiently dispersed. It can be uncomfortable for someone to stand under a space heater. Devices more powerful than 0.6 kW should not be installed in rooms with low ceilings. The solution is to use multiple low-power long-wave heaters.

Which infrared heater to choose for installation on the ceiling

Currently, there are three primary varieties of infrared heaters available:

The spiral of lamp devices is heated to a temperature of more than 500 degrees, thanks to which it gives not only heat, but also a dim light. This allows you to save electricity at night. The design is simple: a nichrome coil is wound on a ceramic rod, placed in an inert medium, and the bulb is hermetically sealed. Lamp heaters do not need a power supply unit. They are efficient, durable, inertia-free. The main disadvantage is fragility. The lamp can easily break, and the heated wire can come into contact with objects or human skin. Of course, the heater is protected by a special grid, but it can not always guarantee 100% safety.

In appearance, pendant devices resemble daylight lamps, but not with glass, but with metal plates covered with ceramics. The heating elements are pressed against them from the inside. The maximum temperature is up to 200 degrees. The back side of the reflector is finished with insulating material. Suspended ceiling heaters are heavier than lamp heaters, making them a little more difficult to install, but they are more durable. As for safety, when choosing a model, you need to pay special attention to protection against overheating. Inspect the location of the thermal fuse, its mounting, consult the seller about its principle of operation. Imagine the heater where you plan to install it and evaluate how potentially dangerous/safe the purchase is.

An ideal option for a child"s room or bedroom. It is safe heating, as the heating elements rarely reach temperatures above 50 degrees Celsius. If a film system is installed correctly, has good thermostats, and is insulated, it becomes the best heat source possible. Separately, it should be mentioned that the heat of the film heater is perceived very naturally, it seems to a person especially soft and pleasant. There are disadvantages too. The film system impedes microcirculation of air in the ceiling zone, is quite difficult to install. Unless you have specialized knowledge and skills, it is better not to undertake the installation of a foil ceiling heater on your own and to contact specialists.

While high efficiency is a defining feature of any ceiling infrared heating system, it is not without limitations. Ask the seller about the features of the model you like when selecting a heater. The only heater type that requires special tools or training to install is film heating; all other heater types are simple to install. Fasteners and connecting components are typically included in the package, making it easy to install the device on the ceiling.

How to accurately figure out the infrared heater in the ceiling. where installing the device is best. distinctions between industrial and domestic models.

Infrared industrial ceiling heaters are a game-changer for heating large spaces efficiently. Unlike traditional heaters, which warm the air first, infrared heaters emit radiant heat directly to objects and people below. This means quicker warmth without wasting energy heating the entire room. Industrial spaces often have high ceilings and drafts, making traditional heating methods less effective and costly. But with infrared ceiling heaters, heat distribution is more even, reaching every corner effectively. Plus, they"re easy to install and maintain, saving time and money in the long run. Whether it"s a warehouse, workshop, or manufacturing plant, infrared industrial ceiling heaters offer a reliable and energy-efficient solution for keeping employees comfortable and productivity high.

Electric and gas infrared industrial heaters

Industrial buildings of large area is quite problematic to heat in the winter season. No traditional heating system can simultaneously – effectively and evenly heat the building, favorably affect the health of workers, as well as be paid off and cost-effective. The only exception to this is infrared industrial heaters.

What are IR heaters, industrial applications?

Gas, electricity, or another fuel source is used by industrial infrared heaters to produce an initial energy source that is subsequently converted into infrared radiation.

  1. Metal housing coated with heat-resistant paint.

Production facilities can heat their workspaces more affordably with infrared heaters than with conventional radiator heating. The moment the device is turned on, the room starts to feel hot. The primary effect of infrared radiation on an object’s surface is heating. The air receives excess heat through natural circulation.

Gas infrared heaters for enterprises

Potential customers are drawn to infrared industrial gas ceiling heaters because of their many benefits. The primary benefit of operation is the device’s high cost-effectiveness.

IR gas heater types

There are two types of infrared ceiling heaters for industrial spaces that run on gas:

  • Light emitters – designed for heating industrial premises with a ceiling height of at least 4 meters. The models are considered one of the most efficient and productive in their class.

Thermal power calculations are performed with the understanding that a 1 kW installation is required for every 20 m³. As such, 100 m³ can be heated with ease using 5 kW suspended heaters.

The device works on the basis of burning a gas and air mixture at a temperature between 800 and 1000 °C in a special burner. A gas venting channel is used to remove combustion products from the system.

Benefits of gas radiators

With experience using gas radiators, it has been possible to pinpoint a number of significant benefits that set the equipment apart from comparable models:

  1. Possibility of local heating of the room.

Electric IR production heaters

Infrared industrial electric heaters mounted on walls and ceilings are intended for both interior and exterior partial (localized) and general space heating. Differentiating between emitters based on their design features and operating principle is widely accepted.

Electric infrared radiator types

Based on the following characteristics, all radiators can be divided into multiple categories:

  • By type of mounting – emitters can be ceiling mounted, have a mount designed for fixing on the wall. There are universal devices that work with equal efficiency in any place of installation, as well as floor heaters.

Professional construction crews like using the stationary and mobile installations. The inability to place furniture or other combustible items near the heating source restricts the use of wall-mounted infrared heaters. Electric heaters provide a few benefits and drawbacks. д.

Because gentle infrared waves are harmful to humans, it is not permitted to install industrial electric short-wave infrared heaters in rooms where people are regularly present.

Since long wavelength radiation has a positive impact on human health, production halls are equipped with these types of radiation. During the winter, long-wave heaters work well as the primary source of heating.

The benefits and drawbacks of electric heaters

When selecting heating equipment, it is necessary to consider the benefits and drawbacks of electric infrared heaters.

  • Advantages – suitable for dusty rooms as well as buildings with a high level of fire hazard. Can be used not only as a general and local heating system, but also as specialized equipment for drying.

Spot heaters are used in the manufacture of paint and varnish, to heat metal prior to treatment, to set up floor deicing systems, etc. In hospitals and schools, electric radiators are frequently utilized.

Brands of industrial IR heaters

On the market for heating equipment, there are several dozen variations of radiators that run on electricity or gas.

Reviews seem to indicate that Pion offers decent stationary and mobile heaters. It is important to exercise caution when buying items under this brand to avoid getting a Chinese knockoff.

European and South Korean manufacturers, such as Siemens, DU Pont, and ABB, are the main suppliers of automated electric infrared heating systems for use in industry. These systems are known for their dependability and quality.

Fire safety of industrial gas fired infrared heaters

The Russian Federation’s Ministry of Emergency Situations issued an order on March 25, 2009 ³, stipulating that the application may be used in fire-prone production areas and other industrial settings. Specifically, it permits emitters to be used in the following types of buildings:

The emitters’ highest point shouldn’t be higher than eight meters. The device’s power is used to calculate the heated area.

  1. Basement and basement parts of the building.

Large spaces with high ceilings can be effectively heated with industrial infrared heaters:

Installing radiators can result in 30–40% cost savings over traditional heating. IR heaters powered by gas are preferable. The requirement for permits to operate this kind of equipment somewhat lessens its popularity.

If infrared heaters are detrimental to output

If the right equipment is chosen and the operating parameters are followed, air heating in industrial buildings and buildings using gas and electric infrared devices is perfectly safe. Short-wave radiation poses a risk to human health.

Computation of a warm water floor’s output and temperature

Calculator for choosing boiler capacity for heating

A calculator to determine how many radiator sections there are

Calculator for warm water floor pipe meterage

Heat loss and boiler output calculations

Cost of heating computation based on fuel type

Calculate the volume of an expansion tank

Calculator for heating in PLAN and electric boilers

Costs associated with heat pump and boiler heating

Infrared industrial heaters that are mobile, wall-mounted, or ceiling-mounted make a good replacement for radiator heating apparatus. The purpose of IR installations is for general and

Advantages Disadvantages
Efficient heating method Initial installation cost
Even heat distribution Requires regular maintenance
Cost-effective in the long run May require professional installation

Large spaces can be effectively heated with infrared industrial ceiling heaters while using the least amount of energy possible. Instead of wasting energy heating the air, these heaters directly heat objects and people by emitting infrared radiation. This focused approach leads to faster heating times and increased occupant comfort.

The adaptability of infrared industrial ceiling heaters is one of their main advantages. A range of locations, such as factories, garages, warehouses, and outdoor areas, are suitable for their installation. They are perfect for settings where space is at a premium because of their overhead placement, which maximizes floor space. They can also be used independently or with ease as standalone units that are integrated into current heating systems.

The longevity and low maintenance needs of infrared industrial ceiling heaters are additional benefits. In contrast to conventional forced-air systems, which depend on fans and ductwork that may malfunction with time, infrared heaters have fewer moving parts and need less maintenance. As a result, reliability is raised and long-term maintenance costs are decreased.

Additionally, compared to traditional heating techniques, infrared industrial ceiling heaters offer significant energy savings. They save energy by not requiring constant air heating and reheating when they heat objects directly. This makes them a more environmentally friendly choice because it lowers carbon emissions in addition to utility bills.

Finally, for heating large spaces in an economical, effective, and eco-friendly manner, consider infrared industrial ceiling heaters. Their energy efficiency, durability, adaptability in installation, and direct object heating capabilities make them an attractive option for both homeowners and businesses seeking to enhance their heating systems while cutting down on energy expenses and environmental effect.

What type of heating you would like to have in your home?
Share to friends
Sergey Ivanov

I like to help people create comfort and comfort in their homes. I share my experience and knowledge in articles so that you can make the right choice of a heating and insulation system for your home.

Rate author
Add a comment