With your own hands for a cauldron furnace: how to cook a simple stove according to the drawing

Seeking to add a little rustic charm to your home while simultaneously increasing its heating efficiency? You might find that building a cauldron furnace by hand is the right project for you. This age-old heating technique has been around for centuries and provides an easy-to-use, yet efficient, means of keeping your house warm in the winter.

You don’t need expensive materials or highly skilled carpentry to build a cauldron furnace. You can build a useful stove that will heat your house and be a talking point with a little preparation and the appropriate equipment. Plus, making something useful with your own hands gives you a sense of satisfaction.

We’ll walk you through the entire process of building a cauldron furnace in this article. To help you visualize and follow along with the construction process, we’ll provide you a detailed drawing. With our tips and tricks, you can build a stove like a pro, regardless of your level of experience with do-it-yourself projects.

Now, gather your materials and prepare to set out on a fulfilling journey of fine craftsmanship. You’ll have the know-how and self-assurance to construct your own cauldron furnace by the end of this article, giving your house a genuinely distinctive source of warmth and comfort.

Topic	With your own hands for a cauldron furnace: how to cook a simple stove according to the drawing
Materials Needed	Bricks, metal plate, fire-resistant mortar, cauldron or pot
Preparation	1. Choose a suitable place for the stove 2. Prepare the drawing of the stove 3. Gather all the required materials
Building Steps	1. Lay the foundation with bricks 2. Build the walls using bricks, leaving space for the cauldron 3. Place the metal plate on top for the cauldron to sit on 4. Connect the cauldron to the chimney
Safety Tips	1. Work in a well-ventilated area 2. Wear gloves and protective eyewear 3. Keep a fire extinguisher nearby

Making a stove for a cauldron from sheet steel

It’s also among the easiest ways to build a furnace, and the following will be needed for the job:

• the cauldron itself is to measure the diameter of the furnace chamber;
• welding, electrodes to it;
• Sheets of steel – the thicker they are, the better for the design;
• hammer;
• corners for the manufacture of handles and supports;
• electric drill;
• Bulgarian.

Note: The task ought to be completed outside, close to an electrical source. In this instance, safety regulations should also be adhered to in every way.

The primary manufacturing stages are:

1. Measure the diameter of the cauldron -the resulting size and further work will be carried out.
2. Make a rectangle from a steel sheet. Its length should accurately correspond to the previously made calculations. It is also necessary to cut out a small hole in it.
3. After that, you can proceed to the slots for the removal of smoke – they must be done at the very top of the stove.
   roll the sheet into a cylinder. To do this, you can use a special shape and a hammer or equipment.
4. Make support and handles.
5. Combine all elements using welding. Some elements can be screwed to ordinary bolts.
6. After construction, such a stove must be covered with heat -resistant paint. And after it dries, you can make fire and cook your favorite dishes.

The following components can be added to the design to make it better:

• Another hole for blowing.
• Gallop – it is placed between the combustion and blowing holes. To install it, you will need to weld metal corners inside the stove as a support.
• The chimney is above human height: so smoke will not fall into the eye.
• Doors. They can be made both independently, from the same sheet of steel, and buy ready -made ones, they are very inexpensive.
• Sparking. It is a metal jar with a large number of small holes.

The aforementioned gadgets all make it much easier to clean the stove and lay firewood.

The only reason this design is superior is because it is more functional or maneuverable, but it will be more difficult to move around.

Pipe and disks option

It is crucial that the stove is lightweight and portable if you intend to use it outside. This option is highly appropriate for these goals because it is very convenient that the materials gathered into a single design won’t add a lot of weight.

Damage of the furnace

The principle of operation of the furnace

Nomads used to carry boilers with them when they moved from place to place. They made a simple hearth for themselves. Two holes were made from separate sides in a pit that had been dug and covered in stones. They placed firewood in one of them, which is downstairs, and smoke emerged from another, which is upstairs. Fire started at the bottom of the structure, warming only the lower part at first. This was sufficient to fry meat and stoop fat. When the walls’ arranged stones started to gradually emit heat, rice was ready for pilaf.

Similar to this type of hearth, modern stoves are constructed of metal or brick and come with a chimney.

The least labor-intensive option is to construct a ring-shaped stand beneath the boiler and mount it on a barbecue. But only on the stove can you get food with hardly any smoke. Brick or metal can be used to make it. Building a homemade stove out of a pipe and cauldron is a simple DIY project. It should be cylinder-shaped with holes at the top for a qualitative outcome. There is a drowning pipe installed in the building.

Features and types of stoves for cauldron

A cauldron’s stove is constructed from metal or refractory bricks. In addition to being faster, the second option enables you to create a portable design. There are numerous easy methods for creating a furnace out of readily available metal components. Bricks are frequently used to construct multipurpose complexes that house appliances like smokehouses and barbecues.

From pipe scraps

It takes multiple pipe segments to build such a stove underneath a cauldron. The diameter of the fragment that will become the furnace’s body is chosen so that the cauldron can be submerged in the structure to a depth of two thirds. By measuring the boiler’s girth at the proper height, you can determine the circumference’s length. Additionally, a chimney pipe is required. It will be smaller, with a diameter of roughly 11 cm. The structure’s bottom is composed of a piece of steel sheet, while the supports and handles are made of metal profile.

From a gas cylinder

The idea behind building a stove out of pipes is similar to that of designing a stove out of gas cylinders. Certain schemes provide for the removal of rectangular pieces from the top of the structure in order to raise the boiler to the required height. The spaces between them guarantee that smoke escapes. The walls’ thickness gives this design an advantage in that it can endure for a very long time. These types of furnaces frequently lack supply doors. The furnace’s light is partially closed to control air flow. The legs cannot be supplied with the legs because the lower portion of the cylinder is very stable.

Rims

You can make a design from the wheels of a passenger car. Only steel elements made by stamping method are suitable for it. Aluminum cast discs are not suitable-they quickly wear out due to sensitivity to high temperature. For the design, elements of the same size are selected to make a design resembling a barrel or pipe. The upper disk is mounted so that the side of the fastener is located on top. It will be necessary to place the boiler there. The hole is cut out in accordance with the dimensions. Disk serving the bottom, mount the fasteners downward. For a furnace chamber, a hole in the shape of a rectangle is cut out in it.

From a sheet of metal

Like most other options, welding expertise is required. After measuring the circumference at a point that represents two thirds of the cauldron’s height from the bottom, add three to four millimeters to this measurement to account for the seam. The slots between the teeth in the upper part are guaranteed by the smoke’s departure. The sheet also has a furnace hole cut into it. Subsequently, the structure is welded along the joint line and folded into the cylinder. The stove can be placed directly on the ground or on a base that has been prepared.

Homemade brick device

A device with the greatest number of manufacturing challenges is the Casane brick oven. A sufficient supply of materials and the corresponding tool list must be ready prior to the assembly of this furnace. Bricks are the building block of this kind of furnace. The use of its fireproof equivalent is advised, though regular brick can also be used.

This kind of cauldron furnace cannot be moved; it is fixed in one location. Her chimney may occasionally be connected to the main domain chimney. In this instance, the furnace can function as both an interior decoration and a household appliance. Design modifications are made during the preparatory phase. All of the major structural components, including the firebox, blew, chimney openings, and upper plane of the plate, have dimensions noted on prepared drawings.

The foundation of the furnace must first be prepared. The future furnace will be more stable and less likely to curvature under the weight of the cauldron and the influence of shrinkage processes if the base is stronger. The furnace’s inner circular section and exterior walls are laid out simultaneously on the foundation.

It is necessary to have a circular masonry because without it, the pressure from the filled boiler will only hit the plate’s cast-iron surface, potentially destroying it.

The diameter of the hole in the plate must match the inner diameter of the circular masonry. This will ensure that the weight load is distributed evenly, with brickwork bearing the majority of it. When installing bricks, all of the masonry’s guidelines must be followed. The basic construction of the corners and the dressing of the elements with each other are required (if any are provided for by the design).

It is crucial to consider the caliber of the brick-to-brick joints. This will determine the degree of gradual burning as well as the furnace’s heat retention factor. The solution and margin are spread equally. Subsequent manipulations can be used to remove the excess portion.

Refractory mixtures are advised as the primary solution since they will increase the furnace’s service life. One possible substitute is to use a clay solution. It is imperative to select appropriate clay that meets the required standards of quality. It shouldn’t be overly fatty or overly full of sand and other contaminants. The following components are installed when the furnace’s outer wall is being laid:

• the doors blew;
• grates;
• Top door.

These components are bought from specialty shops. They have to be mostly constructed of cast iron. It is inappropriate to install any other material in the furnace. This is because stationary stove devices are difficult to repair and their components made of other materials quickly burn out.

The cauldron that will be placed on the stove should be the same size as the furnace in this unit. A certain amount of firewood should be able to be loaded inside of it, and the space between them and the boiler’s bottom helps to ensure that the fuel is burned efficiently.

Auto analysis for a stove

The car’s disks can be used to assemble a homemade cauldron stove. This is a really creative use of the items in the garage.

Old discs from passenger cars are used to make a small stove. It should be noted that despite all of the aforementioned, a stove like this one with a cauldron comes out massive and heavy, and the metal does not burn out for a very long time.

Design with useful additions

Use a blower to bake.

If desired, the oven can be improved during the manufacturing process. You can create a "tuned" installation if you have faith in your skills. The underlying idea is comparable to what was previously mentioned.

And this is what will add additional features to the furnace.

1. A metal ring is welded on the upper rim of the pipes. Its external diameter should coincide with the diameter of the pipe, and the internal is 5-15 cm less. Next, you can install a series of rings for a standard wood stove – a series of rings. Now you can fit any cauldron in size by removing or adding the rings.
2. It is quite possible to make a stove with a grate and a blur. The grate is mounted inside, between the upper and lower fireboxes. Now the crumbling ash is removed from below, and fire is bred on the grille. The legs are not needed in this case, you get a continuous cylinder, but with two doors.

Looking to improve the heating in your house? Creating your own cauldron furnace could be the answer you’re looking for. Simple plans and simple-to-follow drawings will help you build an effective stove that will save energy costs and keep your home warm. Regardless of your level of experience with do-it-yourself projects or lack thereof, this project provides a practical way to enhance the insulation and heating of your house. Explore now to find detailed guidelines and advice for a fruitful build!

Car drives as the basis for the furnace

To put together a construction out of car discs, you must ensure that:

• Welding apparatus and grinder,
• Metal corners or pipes for the manufacture of legs.

The furnace operates on a very straightforward principle:

• In the lower part of the unit, firewood is burned,
• And in the upper, the cauldron itself is installed, deepened into the disk by 2/3.

The lack of discs in the vehicle does not mean that the furnace project should be shelved. It is sufficient to bring up this issue with any auto repair shop. The acquisition of stamped discs that are simple to cook and unafraid of high temperatures is the only requirement. Because cast models were made of aluminum alloys, which melt when exposed to heat, they are not appropriate for these tasks.

Production process

Although assembling the structure won’t require much time or effort, we’ll divide it into multiple steps for ease of use:

• We take the first disk and remove one partition from him.
• We turn this disk so that the second partition is below, this is the future bottom of the furnace.
• Install the second disc on it.
• First, we cut out the lower partition, but not completely to provide a small gap to improve the thrust when the furnace is burned.
• We remove the upper partition of the second disk completely, or partially, focusing on the size of the cauldron. To do this, measure its diameter, and compare whether you can load it into the structure by 2/3.
• By welding, connect both parts of the structure, having previously leveled the outer rims among themselves.
• Weld 4 legs from a metal pipe or corner to ensure the necessary stability to the unit.
• In the lower disk, make markings to install the furnace door and drink it with a grinder. The height of the door is calculated so that the coals remaining after the combustion of firewood do not fall out when the door is opened.
• Weld the mounting elements for the door and the handle, for convenient opening. In the process of kindling, do not forget that the entire structure is made of metal, which will be heated. Therefore, you need to lay firewood very carefully, using gloves or fabric folded several times to protect your hands.
• For the convenience of moving such a furnace, it is necessary to weld the handles from the segments of the reinforcement.
• In the central part of the lower disk there is a large hole designed for the hub. We do not need it, so it must be brewed.
• The first oven run must be performed without products to remove all the paint from the structure. After cooling, the furnace must be cleaned and, if desired, it is covered with heat -resistant paint, which will not only improve the appearance, but also warn the corrosion of the metal.

You can create a design similar to this out of any container, like a gas cylinder. We won’t describe the manufacturing process because it is very similar to the one that was previously discussed; instead, we will examine the viability of creating a sheet steel oven.

Assembly order and step -by -step guide

Before proceeding with the processing of the case from a thick -walled metal pipe, it is necessary to determine the height of the structure. The usual height of the dining table and the working surface of the gas stove 90-100 cm. If you take a pipe segment of a lower length, then the cauldron will be installed below, this means that you will have to work by bent your back. You should not do too high the structure when boiling oil is on top, you will have to rise on tiptoe to stir the dish, which is even more inconvenient than bending your back. Therefore, the recommended height of the boiler cover level is recommended to take 90-95 cm.

To make the design stable, you will have to weld in the lower part from the inner and outside of the plate to increase the area of the support. At the same time, it is recommended to place the bottom at a distance of 5 cm above the legs. The door of the firebox and blew, are made on one side of the stove, it is more convenient and easier than making cuts from different sides. A grate, is installed at least 7 cm below the lower edge of the firebox door. This is done so that burning wood when opening the door does not fall out of the furnace. The point of installation of the chimney should be opposite the door of the firebox, while the place of insert of the chimney into the body and the upper side of the door must be spaced by at least 5 cm in height.

Now that the key ideas are clear to the work algorithm, it can be shown as follows:

• Measurements of the pipe segment are made and the correctness of the slices on both sides is checked;
• If necessary, the top and bottom of the segment is aligned;
• With the help of a chalk or a white marker, marking of the case is made, the metal areas that need to be removed are released, the notes are made where the elements will be welded from the inside of the pipe;
• The window is cut under the door of the furnace and blew under the door. The door blew should be no more than 30% of the firebox area of the firebox area.
• Cut elements are processed and prepared for installation as doors;
• A line is drawn on the inside of the case for installing a grate. From the reinforcement with a diameter of 8-10 mm, the ring is bent and welded along the specified line;
• The circle of the stove is cut out of sheet metal. The circle is processed with an abrasive circle and is as accurately adjusted to the diameter of the case. After that it is installed in place and boiled on both sides – from the side of the furnace and from the legs.
• Loops are installed on the door.
• On the door of the firebox from the inside of the case, the plates from a strip 2-3 mm thick are additionally welded. This is done in order to ensure a tight fit of the door itself to the furnace body.
• In the upper part of the case, triangular cutouts are made throughout the circumference, 30-40 mm deep and 50 mm wide. This is necessary for the better fixation of the cauldron on the furnace body.
• Having retreated from the upper edge 10-12 cm on the opposite side of the furnace doors, it makes a chimney pipe insert, it is made at an angle of 60 degrees. The length of the segment protruding beyond the body should be 15-20cm.
• 4 holes with a diameter of 10 mm are drilled on the furnace door, in the corners at a distance of 15-20 mm from the edges of the door. An additional screen of thick metal is attached to the door from the inside. This is necessary so that when opening the coals do not get out of the furnace, and the door itself does not heat up much.
• A grate of the stove is made from reinforcement with a diameter of 16-24 mm. The distance between the rods of the reinforcement should be no more than 10 mm. The rods are binded on the bottom of 3 crossbars – in the center the longest jumper and two equal on the sides.
• It is better to make constipation from sheet steel 1.5-2 mm thick, constipation should be strong and reliable, even better that the leaf plate is a spring.

It is advised to use a metal brush to clean the entire structure after it has been put together in order to achieve a visually appealing finish, and then get ready to paint with heat-resistant paint.

It is advised not to cook the first furnace after painting because heat-resistant paint bakes when heated and highlights an unpleasant odor. Instead, the first furnace should be completed without cooking in a cauldron.

The description makes it clear that even novices can assemble the stove for a cauldron made of pipe, especially since there will be suggestions for future enhancements like adding more detachable surfaces like a kitchen worktop.

Without a doubt, you need to take care of the chimney, giving it a deflector and sparking. You might consider installing transport wheels so that the entire structure can be carried by one person to make carrying a furnace easier.

How to use it correctly?

I use a small amount of firewood for this purpose. Before you begin cooking, you must first take the cauldron out of the furnace and pump air inside of it. As a result, it is feasible to get rid of any remaining odors and verify that doors and chimneys are installed tightly.

As you continue to operate, abide by these guidelines:

• When burning fuel, the surface of the container and its legs is completely heated, therefore, to ensure fire safety, the structure must be installed on a thick sheet of metal;
• regularly clean the oven from ash residues;
• use only solid fuel for fireboxes. It is strictly prohibited to pour liquid oil products into such a furnace model;
• limit the possibility of access for children and animals to a preheated device;
• Do not place a stove near easily igniting objects;
• Do not make a stove with combustible liquids;
• Such a stove is not adapted for burning household and construction waste;
• It is advisable to use only dry firewood, since when burning raw wood, condensate drops will form and settled on the working elements of the device;
• Equip the chimney of the furnace with a sparking in the form of a canine can with a large amount of holes made by an awl.

Installation of a chimney

One of the furnace’s most crucial components is the chimney. Installing it requires:

1. Bulgarian with cutting discs;
2. fittings, knees with the required rotation angles;
3. welding with electrodes;
4. A pipe made of steel with a diameter of about 100-120 millimeters;
5. hammer.

This is how the installation algorithm ought to appear.

Step 1: Arrange the fittings and pipe in the desired order on a level surface, and then weld them together. Remember to bring your personal protective equipment (gloves, overalls, and welding mask)!

Step 2: Use a grinder to remove all wounds and bulges.

Step 3: Install the completed chimney in the designated location, which is the hole’s corresponding diameter created during masonry. Spread some furnace clay over the joints.

Step 4: Examine the pipe for cracks by watching the smoke as it moves from a small flame that has been diluted in the furnace chamber.

Take note: The cauldron should heat evenly if the structure was constructed correctly. Pour some water there to verify this. When the vessel is heated evenly, air bubbles will fill it from the inside out.

Several options exist for additional finishing:

1. embroidery;
2. painting surfaces with special heat -resistant paint;
3. plaster.

We also observe that the cauldron’s oven is multifunctional, t. To. Not only can you cook a variety of foods in it, but you can also boil water and fry barbecue. In the latter case, skewers are hung from an iron rod that is positioned across the plate. Consequently, the meat will be baked as evenly as possible by the hot coals.

Take note! Although the chimney’s construction appears straightforward, there are several errors in it. As such, it is best to leave this to the professionals.

Making a metal stove from a cylinder

As was previously mentioned, building a tripod is the simplest stove option to execute. We won’t entertain it because, in this instance, everything is very apparent.

And we’ll discuss about a portable metal furnace, which is a good idea if they don’t live in the country full-time—perhaps only on the weekends. An unutilized but still functional 50-liter gas cylinder is a great choice for this. These kinds of cylinders were very common in the village once, but not too long ago natural gas and electric slabs took their place. Aside from the cylinder itself, get a grinder ready for use.

The following is the order of events.

Step 1: Wait a week after opening the tap and keeping the balloon away from the gas.

Solve the cut line in step two. We will need the section of the cylinder with the bottom for our design. With a 25 centimeter retreat from below, draw a flat line.

Step 3: Use a grinder to make a clean cut, then try it on the cauldron. As mentioned earlier, it ought to reach roughly two thirds. Make a few 5-centimeter incisions on top of the cauldron, with a step of approximately 15 centimeters, if it is too big.

Section 4. In order to load fuel, cut the window 20 centimeters from the bottom. The window should have a wide width to prevent problems in the future.

Step 5: Fit a second role to ensure that it fits snugly against the cauldron.

Step 6: Next, you need to figure out a cauldron’s stove manually. To achieve this, take out the cauldron, fill it with firewood, and blow up until all of the odors are gone.

Everything is ready; you only needed to use the bare minimum of tools and materials to manufacture it!

Stages and manufacturing instructions

Scheme and dimensions

We use a steel pipe with a cross section of 250 mm and a furnace height of 450 mm as our base.

Draw something for these sizes so you can begin building a cauldron stove with a pipe and your hands.

Plan and measurements of the cauldron stove from the pipe

Materials and their number

Material, thickness in mm.	Dimensions in mm.
Water pipe, section 250	Cut off the segment 450
A section of sheet, thick 4	255/255
Corner with shelf 40	4 pcs 400
Loops for the door	2 pcs
For the manufacture of handles	Strip steel 50/4 250 mm long – 2 pcs

Prepare a bar that is 200 mm long and 6 to 8 mm thick to use as the door’s handle.

Tools

In order to construct a stove beneath a cauldron using pipe, the following tools and equipment must be ready:

• welding machine;
• Electrodes ANO-21 or MR-3;
• Bulgarian with a reference and cutting circle;
• The electric drill with a set was ruined on metal;
• set of locksmith tools;
• roulette and marking pencil;
• a workbench with a grip or small table tens;

Now that you have assembled all the parts, you can begin building a metal cauldron stove by hand.

Production of a stove

Every task is broken down into multiple phases:

The required workpiece is removed from the pipe, and the edges are then aligned using a grinder and a reference stone. Next, burrs—especially those in the upper portion of the structure—are cleaned with a file.

Crucial! You can cut little sections off the top of the cauldron and straighten the pipe’s top if it does not descend to the necessary depth. Simultaneously, we attain the necessary level of dish immersion. On a level surface, a metal sheet is laid out for the base, and pipe is installed on top and distributed throughout the base’s center.

After 900, the pipe is now being grabbed four times. On the basis, the pipe’s proper installation is verified. One pass is used to boil the joint.

On a level surface, a metal sheet is laid out for the base, and pipe is installed on top and distributed throughout the base’s center. After 900, the pipe is now being grabbed four times. On the basis, the pipe’s proper installation is verified. One pass is used to boil the joint.

Next, the slag is broken up and the seam’s quality is examined. While absolute seam tightness is not required, it is preferable to avoid tampering with areas that have holes and gogs. Cooling the workpiece is necessary.

They are installed after 900, with one shelf being stabbed for a better docking with a pipe and the leg taken at an angle to the pipe 250–300. They are placed from the bottom in a circle, 100 mm from the bottom of the location of the legs from the corner.

The corner’s lower shelves are trimmed so that the leg of the plane touches the floor. Below, tiny pieces of sheet steel are crushed for the furnace’s stability. These pickers only have internal waste.

• From the bottom there is a hole of the door for laying firewood. It can be made of different shapes. The easiest option is a rectangle of steel sheet. But it is better to use a part cut from the pipe. Opening size – 150/200 mm. The door is hung on small loops. A simple sping is made from the rod to fix it in a closed position and welded to the door.
• From the strip it is necessary to make handles for carrying the furnace. To do this, marking 50 mm on each side of the workpiece, clamp them in a vice and bend with a hammer. It is necessary to withstand the approximate angle of the bend 900.

The pipes are then seized after being marked on the side of the mounting location. Once the handles were positioned correctly, weld them to the base.

• All places of welding, burrs on the details are cleaned with a grinder and a file. All protruding sections of the sheet on the bottom are first cut off, then the seam is treated with a grinder with a reference stone.
• If desired, the stove can be painted with heat -resistant paint. For this, it is necessary to pre -degre up all the surfaces with a solvent.
• The stove for a cauldron from the pipe with your own hands is ready.

Production of the chimney

You can cut a piece of pipe for the chimney on the back. In this instance, the smoke will pass through the pipe rather than squint the cook in the eyes. Electric welding is used in the furnace to create a hole that is 150 mm from the top and runs the length of the pipe.

A discharge from the pipe beneath 900 is then made. After inserting it into the hole, three tacks are made, the withdrawal’s proper location is welded, and it boils down to one passage. After that, a 1.5–2 m long pipe is placed on top of it, with a protective visor installed below. The gases are now allocated right away.

Expert judgment Pavel Kruglov Stoverik, seasoned veteran of 25 years

There is an easy method to increase the traction. Drill a row of 8–10 mm diameter holes beneath the furnace to allow for furnace ventilation. However, using a box to create an extra groove is preferable. He blew and will act as an ash box. In this instance, the holes prevent coal loss and facilitate the furnace.

Completed blueprint for a cauldron made of pipes

Ready versions of the furnaces

Additional examples were suggested.

Vesuvius bumblebee

Tag for price: 12,800 rubles.

There is a high chimney, a retractable ash capacity, and a cast-iron grate.

Material for a fugage door: special glass dt-4.

The furnace is 1.91 meters high. 94 cm in width.

The right cauldron holds 12 liters.

Heat-resistant silicon enamel coats the entire oven. After the initial firing, this coating gets significantly stronger. This process must be followed. It is roughly thirty minutes long.

Self -binding. Version "Picnic"

The price is 6,000 rubles.

Proper cauldron volume ranges from 8 to 25 liters.

There is a stand on the set that can hold five skewers.

The chimney pipe has a diameter of 9 cm.

Heat-resistant enamel coating.

12 kg is the oven’s mass.

"Samarkand"

Tag for price: 13,600 rubles.

This is a unique hearth designed to hold a 12-liter cauldron.

Density of wall: 3 mm.

1.9 meters in height with the chimney pipe. 84 cm without it.

You can buy such pre-made versions if you don’t have the time to make stoves yourself.

Operating advice

It makes no difference if the stove is manufactured by you or purchased from a factory; it must be thoroughly warmed up before use. Products must be burned out before cooking in order to prevent damage from the special transport coating that manufacturers apply. More drying is necessary for the brick focus in order to strengthen the solution and ultimately get the material ready for use.

When the furnace is used frequently,

• systematically remove ash from grates and furnaces;
• clean the layers of soot in a chimney;
• Remove the carfangled from the inside;
• get rid of all possible blockages.

The cauldron’s stove should not be used to burn leaves, grass, or trash because doing so will cause it to clog quickly. Firewood and coals cannot be put out with water, nor can they be rekindled with gasoline or kerosene. You must use only dry logs to ensure that there are no ignition issues.

It is improper to use firewood in a stove that is intended only to burn charcoal.

An industrial or home furnace’s ambulance will eventually arrive if it is used improperly. In certain instances, negligent care can lead to potentially fatal conditions. Furthermore, it’s critical to keep in mind that these kinds of constructions are exclusive to adults.

Ash and soot in the furnace need to be cleaned on a regular basis.

Acquaintance with oriental cuisine – simply, quickly and in any conditions: a stove for a cauldron from a pipe with your own hands

Eastern cuisine can be easily prepared in the cauldron, a unique dish.

However, this calls for a unique furnace, which has the following benefits: quick assembly, rapid heating, good mobility, and the capacity to devise workarounds.

Among the drawbacks, two should be mentioned: burning and rapid cooling; the challenge lies in locating a high-grade, thick-walled pipe.

Other options

1. It is not very difficult to make a stove for a cauldron from an old gas cylinder.
2. One of the optimal options for large cauldrons is a stove for a cauldron from old wheeled wheels. In this case, a large cauldron is immersed at a certain distance from the inside of the disk. For 1 design, 3-4 disks may be required.

You can see a wide range of options and create any kind of design. Everything is dependent upon the home master’s abilities and skills.

Tools and materials

The primary material that we advise using is a 3 mm sheet.

Here’s a compromise of sorts:

• For a beginner, cooking is easier than thinner;
• No reinforcement of the structure is required;
• Not afraid of a fabric;
• The design comes out lifting.

Two of the tools we need are a grinder and a welding machine.

Stationary performance

Undoubtedly, the following tasks must be completed in order to assemble the structure:

• Topka, firewood loads into it.
• Bulgarian.
• Combustion chamber that is made of refractory brick.
• Gindly. It is through this element that air is supplied to the lower part of the fuel.
• Ash. This is a retractable baking sheet that is placed under the grate, where the largest accumulation of ash.
• Doors.
• A chimney through which carbon monoxide will be removed.
• It will also be required to perform special holes for free flame pass. They are called fragments and are made on the side of the furnace.
• Metal corners to perform frame.
• To block the upper part, a special steel plate is used at least two centimeters thick.
• Bricks are fireproof, cement mixture.

It’s safe to begin assembling the furnace once all the components are ready and the steps of the process are planned.

How to cook with your own hands

It is going to be a cylindrical oven. utilizing a chimney. Not even an apron and grates. on the movable limbs. We will focus on them, at least a square in terms of the furnace.

Side surfaces

Turning the cylinder from the sheet is the first task.

Without using rollers, there are two methods:

1. Having weld the edge of the sheet to the mandrel of the desired diameter, heating and hanging up a hammer in the shape of a mandrel, achieve a cylindrical shape.
2. Having crushed the sheet to bend to a small corner, then move the sheet a little and holding it again to bend at a small corner. Continue until the cylinder is obtained.

The sheet will not work if the edges, which are about 8 to 10 cm from the edge, bend in the same way. It is advised to take more of the workpiece and then cut these areas off.

The workpiece’s height is equal to the furnace’s height without legs (see drawing).

The circumference length (p = πd), where d is the cauldron’s diameter, plus 8–10 cm from each edge, determines the workpiece’s width.

The rectangular furnace’s side surfaces are welded using the same blanks: height: the furnace’s standing height without legs. Width: 5 cm at the edges plus the CASANA diameter plus 10 cm.

Make a neckline about 30 by 20 cm for the door. The neckline is finished straight up from the bottom.

Form a hole for a pipe or round with a diameter of 100–150 mm, or a square that is at least 100 x 100 mm, starting from the opposite side, but at the top and retreating from the upper edge by 5–10 cm.

Crucial! The size of the aperture selected beneath the chimney pipe.

Lower sheet

It is advised to take the blank blanket and then reshape it to the correct shape after adding a margin.

It should be 10 to 15 cm in front of the lower sheet.

Upper sheet

We might not be able to make the upper sheet for a cylindrical furnace with a diameter on a cauldron.

However, you can create a rectangular stove and a cylindrical cauldron with a diameter greater than 350 mm if you can feel comfortable creating an even hole for a cauldron.

The top sheet is cleaned along the seam after being trimmed to fit the furnace’s dimensions and welded as symmetrically as possible.

Small parts

You will need a blank that is roughly 2 cm wider and 2 cm taller than the door cut.

After you cut the hole, we are aware that you have a piece. It won’t work; it will be erroneous.

Make a row of five to seven holes that are 15-20 mm in diameter at the bottom of the door.

A latch and loops will be needed for the door.

Nuts and bolts, pieces of reinforcement, and leftover sheet steel can all be used to create loops.

The image displays an illustration of a latch.

To carry a furnace, it is convenient to make a pair of handles out of a 10 mm rod.

It is okay to construct the legs from the corner and secure the bolts to the furnace’s lower sheet. They can be taken out of the cooled furnace if needed.

If you use a 10–20 liter cauldron, make sure your leg length is such that the stove reaches your waist. Making a stove more squat is preferable for heavy pots; it is less practical but more stable.

Chimney

It makes no sense for the chimney to be higher than 1.5 meters. In this instance, the pipe’s only task is to clear the cooking area of smoke.

Making a knee or fungus on top of the chimney is not required. These components are used to lessen thrust and shield the furnace from precipitation, which is unimportant for this kind of stove.

Nevertheless, if you use the furnace stationary, simply close the chimney’s cover or take out the stove’s pipe.

A glass that is 10–15 cm in diameter and the pipe’s size is welded to secure the pipe.

This glass should not obstruct the cauldron from the inside, and the 5-cm gap should continue to exist.

Finish

Assemble the stove and make sure everything is working. If not correct.

The sharp edges and zabins must be taken out.

Painting will be finished with work on the stove.

Prior to painting, remove any rust from the stove’s exterior and apply the metal furnace composition.

Over the season, the paint will partially burn, so it’s best to update it for the winter. Much more exquisite.

For homeowners interested in insulation and heating, building a cauldron furnace by hand can be a satisfying and useful project. This straightforward stove design provides an economical and effective means of heating your house. You can build a useful furnace that meets your needs by using simple materials and a detailed drawing.

Configuring a cauldron furnace to meet your unique needs is one of the main advantages of building one yourself. You can modify the stove’s size and design to fit your space, whether you want to heat a small room or your entire home. Making your own furnace also gives you the opportunity to select premium components that guarantee longevity and long-term functionality.

Having completed a do-it-yourself project, building a cauldron furnace also gives you a sense of accomplishment. Not only does building something yourself save money, but it also offers a priceless educational opportunity. You’ll learn useful skills and information about heating systems that you can apply to future home renovation projects.

In conclusion, for homeowners looking for heating and insulation solutions, building a cauldron furnace yourself is a practical and advantageous project. Flexibility, financial savings, and a fulfilling experience that goes beyond simply heating your house are provided by this do-it-yourself method. You can increase your home’s energy efficiency while simultaneously enjoying the coziness and warmth of a homemade furnace with thoughtful design and installation.

Video on the topic

With your own hands from a brick for a cauldron. Simple stove.

With your own hands for cauldrons with flame adjustment. Review. Dimensions. Demonstration of work.

How to make a stove for a cauldron.

Kazan bake all the truth dimensions of the norm drawings

Correct stove for cauldron! Review + size!