Water Water Power Supervision Brows: Technical characteristics, how to choose and install on a collector

Effectively managing water usage is essential in today’s energy-conscious world, not only to reduce costs but also to support environmental sustainability. In order to accomplish these objectives, water flow meters—which are especially made for residential water systems—are essential. Water conservation and cost management depend on homeowners being able to monitor and control how much water is used in their houses, which is made possible by these devices.

It’s important to comprehend a variety of technical features that can have a big impact on a water flow meter’s performance and ability to integrate with residential water systems. Every kind of flow meter has a unique set of features that are appropriate for a variety of applications, ranging from digital displays that offer real-time data to various measurement techniques that offer precision. It’s crucial to take these things into account to make sure the meter works well with the plumbing setups and water usage patterns in your home.

Water flow meters must be carefully integrated into your home’s water system, usually at a collector or main point where water distribution starts. Installing one requires more than just plugging the device in. For accuracy and functionality to be guaranteed, proper installation is essential. Understanding the fundamental installation procedures and safety measures can help individuals without professional training complete the process more quickly and guarantee that the system functions well from the beginning.

The principle of work of the collector with servo drives

The collector distributes the boiler’s coolant along the contours, which are loops made up of heating pipes. The collector is often referred to as a comb. The feed and return beams on the comb have threaded ends.

Bilateral agreements between 2 and 12 on a single beam. Flow meters are mounted on the submitting console in the upper issues, and coolant that enters the contours’ circuits is fed to the lower conclusions.

Return ends of the loops (contours) are brought to the lower conclusions, and the drives with unit nuts are fastened to the upper issues.

You can mechanically turn on or off the heat supply to a particular contour by rotating the heads of the warm floor’s serval drives. Devices operate in automatic mode when positioned in the middle.

The mechanism presses the collector’s removal beam’s back against the stem when a signal from the thermostat changes the voltage that enters the wire. As a result, the warning contour beneath a particular room’s floor is managed.

Service device

An essential component of the heating system is a serving waterproof. The bell tower, a movable flask with a special liquid inside (methylobesol or toluene), is its main component. A material that is heated by an electric current from a thermoregulator produces a louder sound. The sausage starts to press against the output console’s rod.

Types, technical characteristics, differences

A variety of servomotor types exist today. The most popular mechanisms can be arranged in the following list according to how they operate:

  • mechanical;
  • electronic;
  • electrothermal;
  • distance.


The simplest mechanism of control. It doesn’t stand for a sophisticated mechanism. It will be sufficient to turn the device’s head to the left or right, respectively, to increase or decrease the heating of the soil floor loop in order to change the desired circuit’s heating intensity. Where the heating system consists of two or three contours and special automation is not needed, it is advisable to install a manual valve.

There is no need for additional tuning because it is done automatically. A mechanical device’s long service life and low cost are two benefits. One drawback is that the collector servo’s operation cannot be programmed to operate on a warm floor. As a result, the owner must manually establish the required temperature regime before leaving the house.


Liquid crystal displays, which show the servo drive stages, come with electronic models.

You can also set up a different microclimate in every room.

Either manually or automatically, this can be completed.


These kinds of devices are two-position operating mechanisms found in warm floor automated systems. On the cervical body, there are two LEDs. When the drive receives voltage, the green light burns, and when the valve is open, the blue indicator illuminates. Both indicators disappear if the power is turned off.


The primary distinction from other models You can program a remote servo online. Two sensors on the servo track variations in indoor and outdoor temperature. There are 9 operating modes for distance devices. Regulators can also display information about the amount of electricity used on the thermostat display.

There are also drives that are open-type and closed-type. By default, the former are closed, while the latter are nearly always open.

Recommendations for the selection of servo drives

Servo drives come in two varieties. Their initial position of the comb valves is what sets them apart. When there is an emergency power outage at the servo drive’s entrance, the default valve will operate as intended, allowing coolant to flow freely along the curve. If not, the drive will be closed in its typical position. In other words, the servo will keep the valve closed in the absence of food.

It is preferable for the customer to select the model best suited to the home’s operating circumstances.

Therefore, it is preferable to select open devices, for instance, in areas with a long winter and frequent power outages. Until hot water is supplied from the boiler, the floor will not cool.

The best places to install closed servo drives are in warm climates. If the electricity in the rooms is turned off, the temperature does not drop to a dangerous level and nothing bad happens.

When there are a lot of heat consumers, the cabinet usually houses the entire collector distribution system for hot water through the contours. The apparatus can fill multiple boxes when there are a lot of heated rooms.

To guarantee effective water flow management and energy conservation, it’s critical to comprehend the technical features of water power supervision brows before installing them for your home’s heating and insulation system. These devices, which are typically mounted on collectors, assist in keeping an eye on and managing the water pressure and distribution throughout your heating system. Selecting the appropriate model requires evaluating aspects such as ease of installation, maximum pressure ratings, and compatibility with your current setup. The key to ensuring maximum performance and durability is choosing a high-quality brow and installing it in accordance with the manufacturer’s instructions. This will improve the heating system’s efficiency in your house and help you save energy in general.

Installation of a servo drive on a warm floor collector

  1. On the site of the captured caps on the conclusions of the collector, protruding rods are visible.
  2. Cables of servo drives are attached to the return pipes of contours with plastic clamps.
  3. Serving drives are installed with unit nuts on the threads of the rings of the return rowing so that the valve stem enters the opening of the device without distortions.
  1. Putting nuts are tightened manually. Then they are carefully pulled by a wrench.

  1. Certifers are installed on the handout.
  1. For convenience and safe storage, all equipment is mounted on a shield in a closet.
  2. In the cabinet installed wired automation with programming buttons, terminals of servo drives and indoor thermostats.
  3. For remote control of servo drives, the “Access point” device is connected online online.

  1. On different models of drives, the indication of employment looks different. This can be the appearance of a red strip in the lower neckline of the case or white circle under the lid of the servomotor.
  2. The indication signals that the process of heating the circuit to a given temperature occurs on the given. Lack of signal – the floor temperature stabilized, and the flow of the coolant has so far stopped.

  1. For large areas of heated floors with hot water, equipment is placed in one node representing a wide cabinet.

Adjustment of warm sex drives

  • On each room thermostat, the room temperature is set. The device is installed at an altitude of 1.5 – 1.6 m from the floor away from heat sources and direct sunlight;
  • The thermostat receives information from two temperature sensors – air temperature meters and flooring;
  • The thermostat transmits information about the specified parameters to the switching module of wired automation;
  • In turn, the module transfers the command by wires to the servo drive, which either opens or closes;
  • In the absence of automation, the floor temperature is manually adjusted by turning the heads of servo drives.

Technical Characteristics Choosing the Right Model Installation Tips
Flow rate compatibility, pressure limits, temperature tolerance, durability, and material composition. Assess water usage needs, compatibility with existing plumbing, ease of maintenance, warranty, and manufacturer reputation. Shut off main water supply, drain system, position the sensor correctly, ensure tight connections, and test for leaks after installation.

One of the most important steps in effectively managing water use in any household is selecting and installing a water power supervision brow, or water meter as it is commonly called, on a collector system. These devices’ technical specifications are crucial in determining whether or not they fulfill the requirements of the water supply system in a house. Homeowners can closely monitor their water consumption by choosing the appropriate model and adhering to installation guidelines, which may help cut down on waste and lower water bills.

It is crucial to take into account various aspects such as dimensions, flow rate, and suitability for your current plumbing system when choosing a water meter. Accuracy and efficiency are guaranteed when you choose a meter that fits the diameter of your pipes and can manage the average water flow in your home. Additionally, contemporary meters have a number of features that make monitoring easier and more convenient, like digital displays and remote reading capabilities.

It is best to have a professional handle the installation process itself with caution. The meter will function at its best and record accurate readings if it is positioned correctly on the collector. To avoid any compliance issues, it’s also important to make sure the installation complies with local regulations and standards. It’s advised to have the meter maintained on a regular basis after installation to make sure it keeps working properly and supports you in managing your water usage over time.

In conclusion, homeowners can reap major long-term benefits by making an investment in a high-quality water power supervision brow and making sure it is installed and maintained correctly. It helps manage household water consumption expenses in addition to encouraging sustainable water usage. Homeowners can select the optimal equipment for their requirements and enjoy the advantages of water efficiency by keeping these factors in mind.

Video on the topic

Installation of a servo drive on a warm floor distributor

🌕 Cervical drive of a warm floor! How to attach to the collector correctly.

🌕 Cervical drive of a warm floor! What is the danger of a normally closed servo drive.

Installation of servo drives and thermostats, automatic work of the warm floor Part 2

What type of heating you would like to have in your home?
Share to friends
Michael Kuznetsov

I love to create beauty and comfort with my own hands. In my articles I share tips on warming the house and repairing with my own hands.

Rate author
Add a comment