Warm floor in the pool – we independently produce installation under the bypass paths and bowls

Picture yourself entering your pool on a cool morning and feeling the comforting warmth rising up from below, rather than the shock of the icy water. That is what having a warm floor in your pool promises to deliver—a posh addition that makes swimming genuinely enjoyable.

Although installing a warm floor in your pool may seem like a difficult undertaking, it is completely doable to complete on your own with the correct advice and skills. With a few basic steps and an understanding of the concepts underlying warm floor systems, you can create a cozy haven in your backyard.

Planning the layout to include bypass paths and bowls is essential when installing a warm floor in your pool. These components maximize warmth while consuming the least amount of energy by ensuring effective heat distribution throughout the pool. To get the best results, the layout must be carefully planned and carried out.

The process starts with precise measurement and assessment, regardless of whether you’re adding a warm floor to a newly constructed building or retrofitting an old one. Knowing your pool’s size and shape will help you customize the warm floor system so that it fits perfectly, providing even heating and a high-quality finish.

It’s time to choose the right supplies and tools for the installation after you’ve sketched out the design. Every part, from heating elements to insulation, is essential to the efficiency and durability of your warm floor system. Years of trouble-free operation can be guaranteed by selecting dependable hardware and high-quality materials.

Advantages of warm floors in the pool

The room can be uniformly warmed by warm floors. There are no hot or cold spots during their arrangement. Because these systems are concealed beneath the flooring, they do not detract from the interior and are more cost-effective than radiators.

The majority of the pool’s floor is made of cold ceramic tiles, which makes walking on them uncomfortable.

The configuration of heated pavement will enable you to resolve this issue.

An additional aspect of the genders in the pool is that water occasionally gets on them, which raises the humidity level. Additionally, because wet tiles can cause slippage, there is a chance of injuries. This can also address the issue of heated floors. After all, water evaporation from a warm surface happens more quickly.

Furthermore, the water in the pool is heated in addition to the warm floors.

What type of warm sex to choose

There are two kinds of heating for sexes: electric (cable and infrared) and water. Their heating sources are different. This is a hot coolant for buildings that have pipes. for the grid of electric power.

Given the high humidity in the room, it is advised to heat the water in the pool as electric heating is deemed riskier. However, you can lay the cable floor if it is installed in a screed that shields the heating cable from moisture. Film systems can be installed to heat the tracks, but they must have excellent waterproofing.

With an emphasis on bypass paths and bowls, we’ll delve into the world of do-it-yourself warm floor installation for your swimming area in this post. The luxury we’re going for is the feeling of stepping out of the water onto a warm floor. We’ll walk you through each step of the procedure, making it simple to comprehend and carry out. We can help with everything from setting up the foundation to connecting the heating system. By the time it’s all through, you’ll be able to create your own little haven while controlling expenses and feeling proud of yourself for a job well done. Together, let’s transform your pool area into a cozy retreat!

Features of the warm floor in the pool

The pool room’s warm floor serves as either the primary or supplemental heating source.

It is advised to use site zoning to guarantee more comfortable conditions. This will enable you to provide service in every zone, including paths and bowls with the proper level of heating in the coolant.

Installing a collector group is essential since it will supply water to each branch independently. Water and air temperature can be easily maintained with the installation of an automatic thermostat.

Additionally, keep in mind that standards dictate that the air temperature should be several degrees higher than the water temperature during layout.

Heating of the bypass paths

As mentioned previously, the floor of the pool, including the bypass paths, is typically tiled, which feels cool to the touch and is uncomfortable to walk on in bare feet. As a result, the under-track heating installation will proceed more comfortably.

The heating element ought to be installed such that the paths are all heated and the air and water temperatures don’t differ significantly. The pool’s water temperature is normally 26 degrees, the air temperature is 27, and the track surface is +31.

Warm floor under the bowl

You can heat the water to a comfortable temperature by using the warm floor in the pool bowl.

The heating system in the bowl, like any other with heating, consists of a thermal insulation layer over which the pipeline is arranged in a "snake" or "spiral" pattern. All of the pipes are joined to form the overall shape and are screeded.

Installation of the warm floor in the pool

The heated floors in the pool can be mounted with electric and water. Even when designing a structure, you must select a heating model in order to accommodate all of the subtleties of the heating system.

A metal profile is mounted on the concrete blanks, and the center establishes the level by concentrating on their arrangement.

On top of the positioned beacons, a concrete screed is constructed.

Polystyrene foam is placed on the pool bowl’s base to provide insulation once the concrete has dried. It is joined with a unique adhesive.

The pipeline is installed and fastened to the polystyrene foam using fasteners. Using polyethylene stitched pipes with an anti-dyfuster layer is advised.

The previously installed beacons are covered with a second layer of concrete screed.

The concrete needs to be leveled after it dries. Use of a setting machine is possible.

The last step involves laying the ceramic tiles that will make up the pool’s bottom.

The floor needs to be connected to either the house’s heating system or the water heating device in order for it to function. The required temperature should be considered when selecting the boiler’s power. The heated water that is fed into the pool is passed through the heater.

Because the temperature is higher than what is required for the floor, collecting the collector is necessary when using a common house boiler or if the source is central heating.

• A mounting grid is laid on the insulation, it will improve the clutch of the screed, and the pipeline will be attached to it.
• Pipes are mounted according to the planned scheme. They are fixed to the grid with clamps.

• The pipeline is connected to the power source. It can be an autonomous heater that is tuned to the floor temperature. It is possible to fuel from a common home boiler room, through the pump-distribution group, it will ensure the supply of the coolant to the floor of the desired degree.

• A concrete screed is poured, this is done only after checking the system to leak.

• When the concrete dries, ceramic tiles are laid.

On a screed that has previously been completed, there is a choice for a more straightforward cable floor installation. In order to accomplish this, the intended scheme calls for making strokes in the screed for the wire and temperature sensor.

After being removed from the silicone shell, the cable is inserted into the strobes and secured with tape. The installed thermostat is linked to the wire. The sensor is located in the completed cable and extends from the regulator. Next, putty or tile glue is applied to the surface. On top, tiles are mounted.

Ventilation of the room

Condensation moisture builds up in the pool area, causing metal parts to rust and mold to grow. Humidity levels should be between 50% and 60% to prevent condensation and make the space feel airy.

It takes high-quality ventilation to reduce the humidity level. Heat will not be lost if a recuperator and a heat pump are used in the ventilation system. Through the heat exchanger, the recuperator’s heat is retained and transferred to the air that is flowing. In other words, since the air is already heated, heating expenses are reduced.

Operation and maintenance

There are several guidelines that must be adhered to when operating warm floors:

• The temperature in the room should be in the aisles +26 – +30;
• water temperature is 23 – 27 degrees;
• You need to turn on the heating in advance, since the water heating with warm floors is slowly carried out.

Maintaining the ideal temperature will be simpler after installing automatic thermostats. A one-degree change in temperature activates the indoor thermostat; however, the heater takes some time to respond to this. The system’s efficiency will rise with the use of chromium turbulence.

Adding a warm floor to your pool area can completely transform the space, adding luxury and comfort and improving the whole experience. By taking on this project on your own, you can save money and feel proud of yourself for coming up with a solution that is specifically suited to your requirements.

The increased comfort that comes with having a warm floor installed in your pool area is one of its main advantages. You won’t fear walking on chilly concrete or tile floors any more; instead, you’ll be greeted by a delightfully warm floor that begs for leisure and enjoyment. The warmth coming from the floor gives your experience a hint of luxury, whether you’re swimming laps or just relaxing by the pool.

Furthermore, a warm floor installed beneath your pool’s bypass paths and bowls offers effective heating without sacrificing style. Conventional heating techniques, like overhead heaters or radiators, can be obtrusive and bulky, which takes away from the aesthetic appeal of your pool area. On the other hand, beneath the surface, a warm floor system blends in perfectly with the design while effectively heating the area.

Customization is an additional benefit of working on this project on your own. You can completely customize the look and feel of your heated floor system by choosing the materials and parts yourself. Depending on your needs and preferences, you can customize the installation, whether you’d rather use hydronic tubing or radiant heating mats.

To sum up, adding a warm floor to your pool area is an excellent investment that will improve comfort, style, and enjoyment in general. By taking on the project on your own, you can save money and have the satisfaction of coming up with a solution that is specifically tailored to your needs. Why then wait? Install a warm floor now to turn your pool area into an opulent haven.

Video on the topic

Correct Water Warm floors! #shorts

Warm floor in the pool

Warm floors in the pool #heating #Teplypolpols #Teplypol #Pool #Mountedopolopol #Tece #rehau

Heat exchanger for the pool. How to arrange water burden in the pool?

Warm floor in the pool.

The simplest and cheapest collector of warm floor

[Offtop] pool heating