Transfer of a heated towel rail to another wall

It is possible to optimize your home’s heating efficiency with seemingly insignificant changes as well. Relocating a heated towel rail to a different wall is one example of such a change. Even though it might seem like a simple task, there are a few things to take into account to make sure the transfer is completed successfully and safely.

First and foremost, it’s critical to evaluate the heated towel rail’s new location. Take into account elements like accessibility for maintenance, ease of connection to water pipes, and the effect on the room’s overall heating distribution. The optimal location can enhance both visual appeal and usefulness.

It’s imperative to turn off the heated towel rail’s power supply and let it cool completely before beginning the relocation process. By doing this, you can guarantee your safety throughout the transfer and avoid any possible mishaps or device damage.

Next, take the heated towel rail down from the wall, being careful to do so. You might have to remove it from the wall mount or unscrew the brackets, depending on the mounting mechanism. During this process, take care not to damage the wall or the device itself.

After removing the heated towel rail, evaluate the wall’s state and make any required repairs or setups for the rail’s installation at the new location. To support the weight of the device, this may entail smoothing over imperfections, strengthening the wall, or adding reinforcement.

Once the new wall has been prepped, install the heated towel rail firmly. To guarantee stability and safety, use the proper mounting hardware and adhere to the manufacturer’s installation instructions. To achieve a professional finish, make sure the device is aligned and level.

Reinstall the power supply and test the heated towel rail’s functionality after it is firmly in place. Make sure there are no operational problems and that it heats up correctly. Once the transfer is finished, take advantage of the increased efficiency and comfort that result from optimizing your home’s heating layout.

Step	Description
1	Measure new wall area for towel rail placement.
2	Check for electrical and plumbing access on new wall.
3	Turn off power and water supply to the towel rail.
4	Remove towel rail from current wall carefully.
5	Fill any holes left in the old wall.
6	Install mounting brackets on the new wall.
7	Securely attach towel rail to the new brackets.
8	Connect electrical and plumbing lines if necessary.
9	Turn on power and water supply to the towel rail.

The transfer of a water heated towel rail

Design for a towel rail heated by water.

It is much more difficult to carry a water heated towel rail, because a large amount of work will need to be carried out here. But most importantly, it will be necessary to carry out hydraulic calculations and make their coordination with the housing office or with management companies. This takes a lot of time, because only the draft validity of work, which includes all the necessary calculations, is drawn up within a few weeks. At the same time, it will not be possible to independently prepare it without knowledge in this area. I will need to contact specialists. Only after that is the finished project is sent for approval. And here it should be noted that the decision is made very slowly. The administration of the management company or ZhEK may agree on for many weeks. Even preparatory work cannot be carried out into this period. At the same time, there is no guarantee that, having spent a long time waiting, you will successfully receive approval. After all, often such changes can not be made to the common house water supply system, accordingly, there will be a refusal.

Now let’s talk about moving the towel rail that is heated by water to a different wall. In order to complete this work, the following will be needed:

• pipes;
• Bulgarian;
• Ball Valves;
• level;
• dowel;
• drill;
• tees;
• screwdrivers, wrenches.

Additionally, a new heated towel rail will need to be purchased. He had to have included in his Maevsky crane design. After all, the volume of the emerging air cork will rise when such a device is removed from the riser.

Transferring a heated towel rail from preparatory work must begin immediately. You must first stop the water in your house. Next, you must immediately cut off the hot water supply at the riser located in a multi-story building’s basement. You can ask for plumbers who work in them, or you can do this on your own after first confirming with the management company or Housingire administration.

Transfer scheme for water towels.

Moreover, you can begin safely disassembling an outdated water-heated towel rail. Take a grinder and use it to cut off the available equipment so that you don’t have to spend a lot of time on it. Simply use homemade tools to undo any threaded joints that may be present.

The location of the new heated towel rail transfer must now be decided. You can give preference to anyone here because this device doesn’t require electricity to function, so it won’t be threatened by water sources. The holes left by the old heated towel rail’s fastening will then need to be filled with tees and connectors with the appropriate diameter. After that, you can extend the pipes’ necessary length to the device’s new location.

Additionally, a bypas must be made in order to move a water-heated towel rail to a different wall. Since it is installed from a pipe segment, its diameter ought to be less than that of the main pipe. It is imperative that you install ball-type taps on the heated towel rail pipe before proceeding, with one tap mounted directly on the bypass.

Legally transferred

To apply for a permit, you will need the following paperwork:

• passport, or other identification document;
• an application addressed to the head of the ZhEK, which describes the types of work in detail;
• The conclusion of the examination, which indicates a schematically the future location of the mixer;
• Technical passport (houses, apartments, etc.D.);
• Other documents confirming ownership of the dwelling.

The applicant pays for the installation project and any additional paperwork. Once approved, a work date is determined. Notifying the home’s occupants that the water supply will be cut off at a specific time is essential to preventing disputes.

The cost of compiling an examination and documentation package varies according to the features of the heat supply scheme and the intricacy of the installation.

Materials necessary for installation

Prior to beginning the disassembly process, you need to gather the following supplies:

• anchor bolts, brackets, or other type of high strength bolts (drill on metal, dowel);
• plumbing tape (for better adjustment of the joints and as a prevention of leaks);
• agreed project;
• spanners;
• welding machine;
• heating pipes made of steel or polymer heat -resisted;
• gaskets;
• level;
• tees.

Preparation

To make room, a washing machine, sink, bathtub, and other large items must be removed.

A specialist should disconnect all water supply systems in accordance with the project’s completion after they have arrived at the location.

While installing something on a different wall:

1. It is necessary to unscrew the wide bolts-bolts attached to the base of the heated towel rail, cut the pipes to the base, put the plugs if necessary, dismantle the old heated towel rail.
2. Mark with a marker, the future location of the pipes (use couplings for connection).
3. Carry out welding work and check the seams for strength by launching the communications system.
4. According to the project.

If remade incorrectly, the following issues could arise:

• the presence of an air cork;
• hydraulic support;
• violation of hydrodynamics;
• “Thermal radiation”;
• drops of water levels;
• Slaws.

Transfer of a heated towel rail over a long distance

The same plan that was previously discussed is used when transferring a heated towel rail to a distance greater than 0.5 meters, but there is one crucial difference: the bypas are present and are placed in a certain location. If you don’t consider this, you risk breaking the water supply system or a heated towel rail won’t function well.

A bypass allows you to circulate water around a heated towel rail by acting as a jumper between the forces connecting it. The entire system will function as intended even if there are issues with one heated towel rail.

Rice 2. The installation scheme by Bypas.

Bypas has the great benefit of enabling the installation of shut-off taps. When disassembling or modifying the heating temperature of the heated towel rail, you can do so with their assistance without affecting the functionality of the entire system.

Installing shut-off cranes on a heated towel rail is not feasible without a bypass because doing so would de-energize the entire system when the tap is overlapping.

It is sufficient to extend the standard bends with a pipe of the same diameter to the heated towel rail installation site when transferring one in the absence of a bypass. There won’t be any issues when operating if the taps are not installed or overlapped. With the sole exception that replacing it will require de-energizeing and draining the entire highway, and the heated towel rail’s temperature cannot be changed.

Transferring a heated towel rail far from the highway without putting in bypas Rice.3.

Set the bypass to eliminate the above-mentioned deficiency. Installing bypass in the immediate vicinity of a heated towel rail is essential for optimal performance (no more than 40–50 cm). If not, the water in a heated towel rail will essentially not flow and will not be heated.

Several practical tips

Several details need to be considered to ensure that the installation of a heated towel rail in the bathroom does not turn into a catastrophe. For instance, professionals advise investing in a robust steel heated towel made of seamless pipe for an apartment complex. A model like this is made to withstand higher water pressure in the system and hydraulic shoes, which are a common occurrence in the city water supply network. Imported brass models, made for low pressure and care, are suitable for use in private homes and cottages with independent and tranquil water supplies.

The functioning of a heated towel rail and potential maintenance are faced during the installation of a bipas jumper.

The device’s connection to the system is a crucial component. Thread or welding are the two options.

It is not advisable to use a threaded connection in conjunction with a welded riser or in locations that are inaccessible for maintenance, such as when the connection is meant to be concealed by a decorative element.

Not only can these modifications to the standard home tap system cause plumbing problems, but they can also give rise to legal issues. You must perform the necessary hydraulic calculations (i.e., order from experts) and coordinate them with the local management company, ZhECK, etc. P. in order to resolve the issue. Some locations do not require this kind of permission, but issues will inevitably arise if the device is transferred in a way that violates the law and is reflected throughout the system.

Procedure for transferring a heated towel rail

When transferring the device, the steps will go as follows:

• Using a regular plumbing, a riser is turned off in the basement of the house.
• The old heated towel rail is cut. If necessary, part of the supply pipeline is dismantled. The remaining pipes should have a length suitable for joining a new pipeline.
• On the drives of the feed and reverse pipelines, the thread is cut using the dies, and then the ball valves are installed.

Flax paste is used to seal threaded joints. Here, FUM tone is not permitted. Installing the device with a pitch nut ("American") on quickly detachable couplings is advised.

• The leading and reverse highways to the installation site of the device are laid. If the distance is large, the pressure loss should first be calculated so that they do not significantly exceed the previous ones, which were on a towel with an old arrangement. The pipeline is laid on the wall or hidden in it under a decorative coating.

Crucial! It is not permitted to make horizontal strokes on the load-bearing walls. Is this something that can be done in an emergency situation? The final, tiny, diagonally located section is the only choice.

Horizontally moving pipes can be concealed behind drywall with fake walls or beneath baseboards.

• Using the level, marking is made, holes are drilled in the wall, plastic dowels are inserted, and then fasteners are installed on the wall and the device itself.
• The transferred heated towel rail connects to the system through ball valves.
• In parallel to the device, a bypass is installed with a tap to turn off water.
• An air vent is installed at the top.

How to transfer a water towel rail

This kind of heated towel rail is far more challenging to transfer. After all, the hot water used to heat it originates from the heating system. In this instance, the task sequence should resemble this:

Design for a towel rail heated by water.

1. First of all, hot water is turned off. To avoid the troubles of neighbors, you should inform in advance.
2. A special jumper (bypass) and 2 ball valves are installed, with their help to serve a heated towel rail, it will be much more convenient. With the help of taps, water is diverted to a jumper from a heated towel rail. Now you can safely remove the equipment and carry out any work with it. Bypass is usually made of a small amount of pipe smaller than the main pipe.
3. Then the pipes are laid from the riser to the place where the new heated towel rail will be located. It is necessary to control that the device is installed correctly. Otherwise, he can work incorrectly. In order for the interior of the bathroom to look more attractive, it is better to deepen the pipes into the wall and close them using a decorative decoration.
4. Fixing the heated towel rail and its connection to pipes.
5. Lastly, the system is checked and finishing work is performed.

Pipe installation tips

Use the advice provided by the masters to ensure that the work proceeds without any problems:

1. If possible, use a horizontal pipe placement scheme, since it gives the least pressure on the heating system.
2. In order to exclude emergency situations, it is necessary to cut the articular-type crane-river before the start of the entrance to the heated towel rail.
3. Before buying pipes and a heated towel rail, make sure that the product has quality certificates, as well as a warranty card.
4. Think in advance where the washing machine will be installed.
5. The height of the installation of the U-shaped (M-shaped) or stairs of the heated towel rail should be at least 95 cm from the floor. SNiPs recommend observing a distance of 60 cm to the nearest technical equipment.
6. Pay attention to the section and diameter of the pipe. They should be the same size as the previously established. If you have an old -type house, then a certain type of pipes may not be released anymore. The issue is not a incitement, you can solve with the help of tees and adapters.

The quality of the raw materials used to make consumables has a major impact on their cost. Because of their strength and long lifespan, steel pipes are orders of magnitude more expensive than plastic ones.

However, it is preferable to use plastic pipes when installing a heating system in a private home because they are simpler, easier to install and maintain, interchangeable, and more reasonably priced.

The results of testing and inspection must be shown in the documentation that is fastened to the heated towel rail. It is important to record how stable the apparatus is under high pressure and temperature combinations.

Starting and inspecting the entire heating system is followed by finishing work. If the outcome is favorable, the parties sign the act confirming receipt and acceptance of the completed work. The customer keeps one copy, while the contractor keeps the other.

Watch this video to see how a specialist demonstrates the process of moving a heated towel rail to a different bathroom wall:

Transfer of an electric heated towel rail

Diagram of the heated towel rail system.

The simplest solution is to replace the heated towel rail with an electrically powered one. What is needed for that? This is a tool list:

• roulette;
• screwdrivers;
• fasteners;
• drill;
• spanners.

Starting the process of moving a heated towel rail requires selecting the best location.

Recall that a device of this kind ought to be placed away from sources of water. At least 60 cm of space must be left.

As a result, equip yourself with a measuring tape.

Once you’ve located the best location, make sure there is a power source nearby. If not, you will have to install an additional wire beneath the finish, which is very inconvenient. To complete all of this in the shortest amount of time, it is preferable to have a heated towel rail closer to the outlet.

Consequently, extra repair work won’t be needed on the wall where it needs to be fixed, maintaining the bathroom’s aesthetic appeal.

It will be necessary to disassemble the previous gadget at the next step. This is done easily because all that needs to be done is take the existing heated towel rail out of its mountings. The next step is to set it up in a new location. In this case, you must install the fasteners by drilling holes in the wall for them. A heated towel rail can then be mounted on the wall. Verify that it is fastened firmly. After that, you can check its performance by plugging it in to power. We’ll finish moving the heated towel rail in the bathroom to a different wall. It will be able to be operated safely.

Types of heated towel rails and their advantages

To be clear, there are various kinds of heated towers, and while each has benefits, they are not without drawbacks.

Devices are typically used for:

• Standard water – work when connecting to hot water supply at home or its heating system. The problematicity of such a device is associated with the possibility of operation only in the heating season or in the presence of hot water. Otherwise, the device will be useless. The second point – the difficulty with the connection – its illiterate execution may have a negative impact on the operation of the water supply or heating system of the whole house.
• Electric towels – metal tubular structures with an electric heat heater inside. A big plus of such a device will be the possibility of autonomous operation.
• Universal heated towel rail – probably the most convenient and unpretentious option. Works both from hot water and electricity. The only minus will be the price of such devices – almost 2 times higher than for standard models.

There are still incredibly practical portable electric models available that can be used as heating appliances not only in the kitchen or bathroom but also in the room. They are placed on the floor and don’t need to be installed.

How to transfer a heated towel rail using welding work

A common query from people new to installing such sophisticated equipment is: is it possible to move a heated towel rail with welding? In actuality, threaded connections can frequently suffice in this situation, and welding is not always required. A threaded connection is more useful and far simpler to use. Experts advise mounting pipes with a threaded connection and connecting the heating system with a welding connection. Sometimes, though, it is not possible to eliminate a single threaded connection.

For this reason, professionals connect a heated towel rail to a heating system using welding. It is best not to attempt welding on your own as it can be extremely risky. Rust and dirt must be removed from the pipes before new ones are connected to the old ones. And only then will there be a high-quality connection. In the event that this cleaning is neglected, an ambulance may arrive.

Experts typically use overwhelming, sewing from left to right.

Here, it’s also critical that the seam be smooth and attractive when welding. If everything is done correctly, the owner of the device will have no problems and no leaks for a very long time.

Expert assistance in moving a heated towel rail is affordable, so it’s best to get in touch with them right away. They will instruct you on how to take care of the model and run it correctly to prevent further malfunctions. Additionally, it is crucial to monitor installation quality and confirm that the services are covered by a guarantee. In this instance, one can be certain that all repairs will be made in good faith and that the towel will function effectively and long into the future.

The transfer of a water heated towel rail

You must first inform your management company that you intend to replace the heated towel rail and move it to a different wall because in certain older homes, the location of the railing’s installation is covered by the project. Afterwards, you have to obtain their necessary approval so that there won’t be any issues later.

Once all formalities have been completed, you can move straight on to the action. Initially, you must consent to your management company turning off the hot water. Notifying your neighbors that the hot water supply will be interrupted for a short period of time is a good idea. The entire procedure typically takes about an hour and a half. in order to keep cordial ties with tenants. Water disconnections are typically handled by a management company plumber.

Please be aware that this service is typically paid for. It is not advised to independently disconnect water in order to save money, though.

First of all, since it is impossible for unauthorized people to enter the basement, you most likely won’t be able to accomplish this. Nobody can guarantee that you can only properly turn off your own riser without compromising the house’s water supply, even if it is still possible.

Device:

Once the water has been disconnected, you must use a grinder to cut off the old heated towel rail and install ball cutting taps along with a bypass jumper that allows the entire system to function without interruption in the event that the cutting taps become blocked. The heated towel rail is now simple to close, repair, and replace gaskets. The process is made much easier if the taps are already installed because removing the heated towel rail only requires unscrewing the unit nut.

Installation plan for a water-heated towel rail

Now it is necessary to lay pipes of water supply to a new place of installation of a heated towel rail. It will be useful to recall that these should be pipes from materials that withstand high temperature. It can be either steel that has already been tested by time, or polypropylene reinforced pipes. you can deepen them into the wall or using a decorative finish. The diameter of the newly laid pipes should not be less than the diameter of the source pipes, otherwise problems with the system may occur. If the distance to the new installation location is quite significant, it is better to use the services of a competent vehicle engineer who will calculate all possible hydraulic losses and correctly select the diameter and pipe material for you.

Laying of pipes

The wall where the heated towel rail will be installed needs to be marked next. The device is mounted on the wall using brackets, which require drilling into the wall, driving dowels, and tightening brackets.

Diagram showing how to install a heated towel rail in a modern style

Once the pipes are installed, you must hang a heated towel rail somewhere new and fasten it to the pipeline.

Method of connection

When it comes to a steel pipeline, the heated towel rail can be connected to the main system via welding or by using a thread with cranes. It is not advised to use the thread in situations where system maintenance is not possible or where access is restricted by aesthetic decorations, etc. Welding is the preferable method because such a compound may leak.

In the last phase, the system is testing a new device’s performance and crimping it.

Water with valves

After taking all necessary steps, you can complete any remaining tasks.

As long as all the regulations are followed and the heated towel rail is being transferred by a qualified individual who can complete the task without fail, it shouldn’t be too difficult.

General rules when transferring a heated towel rail to another wall

There are general guidelines for transferring each type of device, despite their differences:

1. The design of the dryer must fully correspond to the surface on which it will be attached.
2. Do not ignore the establishment of bypass-the reserve path that will be involved in the event of any accident or an abnormal situation. This will protect you from many problems in case of unforeseen breakdowns.
3. The pipes that will be used during the installation process must meet special requirements, otherwise in the future they may not withstand the load.
4. If you provide a small slope of the supply pipe towards the flow of hot water, then you can get rid of the appearance of air plugs in the future.

You now understand the features of the heated towel rails and how to move each of them to a different wall, as well as what has to be done to ensure that the housing inspection and the homeowners’ association have no complaints regarding these modifications to your apartment.

Moving a heated towel rail to another wall can be a practical solution for optimizing space and improving functionality in your home. Whether you"re redesigning your bathroom layout or seeking better heat distribution, relocating your towel rail requires careful consideration and planning. Firstly, assess the new wall"s structural integrity and proximity to existing plumbing and electrical connections to ensure a smooth transition. Prioritize safety by consulting a professional if you"re unsure about handling electrical or plumbing work. Additionally, take into account the aesthetics and accessibility of the new location to enhance both the visual appeal and practicality of your bathroom space. By following these steps and seeking expert guidance when needed, you can successfully transfer your heated towel rail to a new wall, enhancing both the comfort and efficiency of your home"s heating system.

Coordination of transfer

1. The apartment is not supposed to be redeveloped and it is only required to transfer the heated towel rail to the bathroom. Then the work should be performed by employees of the company, which will provide documentary confirmation of the proper transfer of the device in accordance with all the requirements.
2. If the premises are overhaul and redevelopment is provided, then changes in the bathroom should be made to the documentation. The coordination of the transfer of a heated towel rail will occur together with other reconstructions in the apartment, and the general design documentation will be submitted to the housing inspection for approval. Most often, the transfer of this device is allowed if it is not located on the wall adjacent to the neighbors. After receiving the official permission, you can carry out repair work.

Also read:

• How to choose a bathroom for a bathroom: http: // ksportal.RU/518-Kak-Vybrat-Polotenceshitel.HTML
• DIY bathroom repair: sequence of work and choice of materials.
• How to close pipes in the bathroom hiding them into the wall? Answer .

Transfer of an electric heating device

Installing a heated towel rail that runs on electricity

1. First you need to determine the new location of the electric heated towel rail and mark. SNiPs recommend installing these devices at a distance exceeding 60 cm from other household plumbing items: bathroom, washbasin, shower cabin, etc. The height to which the heated towel rail is attached should not be less than 95 cm and above 170 cm. This is done so that anyone can easily use this device.
2. Next, you need to make a socket in a new place or hide the wire from a heated towel rail into a decorative finish.
3. At the final stage, the dismantling of the old device is carried out and its installation in a new place. After that, the heated towel rail connects to the network. If necessary, the necessary work on the decoration is carried out.

Please take note that owners of electric heated towelmen must exercise caution regarding their personal safety due to the high humidity in the room. It’s essential to install an automatic machine in an electrical panel to avoid unanticipated events.

Possible difficulties in installing

It seems to people who are not faced with the installation of elements of this type, that every newcomer will cope with such a task. This statement will be a clear error. Few people think that the transfer of a heated towel rail is associated with a change in pressure in the system. In the future, the device will operate under high water pressure, so all inaccuracies during installation will result in big problems when operating the element. That is why it is better to invite competent specialists to install. They will transfer the heated towel rail in the shortest possible time. The system will work without complaints, there will be no risk of flooding neighbors.

There may also be issues when attempting to remove the heating element from its final position on the wall. The joints of the heated towel rail are susceptible to damage. As a result, you should always keep your workspace extremely tidy.

We thus discovered the method for moving the heated towel rail to a different wall. Its installation shouldn’t cause any more issues at this point.

Transfer of a water heated towel rail, what difficulties arise

First, there could be legal issues pertaining to permission to transfer; second, there might be issues with the load of a new design on the home’s water supply system when transferring a water apparatus.

The remaining challenges pale in contrast to the initial two.

Turning off the supply riser is required before beginning the transfer. It is best to leave this to the professionals—professional plumbers—rather than trying to handle it yourself.

Although water devices typically lack a heat control system, you can install a ball valve on them to modify the installation’s heating.

First and foremost, you should always confirm that it is legal to transfer the house’s structure. If not, agreement with the appropriate authorities is required.

In the event that the installation was moved and the housing inspectorate was not satisfied, administrative responsibility will be placed on you. If the matter goes to court, you might have to pay a hefty fine or receive a punishment.

Watch this entertaining and secure video to learn how to connect a heated towel rail:

Installation of a heated towel rail to another wall

What queries might then come up if you choose to move the device? Let’s start by determining whether these modifications qualify as apartment redevelopment, necessitating a unique housing inspection resolution.

There are no corresponding regulations because such changes are not mentioned in the BTI poetry plans. If you reside in an apartment building rather than a private home, keep in mind that the dryer is powered by the shared heating system. This implies that in order to prevent bothersome issues down the road, you must coordinate your actions with the house manager and the other residents.

The course of events could go in one of two ways. For instance, if your plans involve moving a heated towel rail alone, rather than completely renovating the apartment, simply get in touch with the management company. They will then provide you with a certificate attesting to the fact that all work was completed with their assistance.

In the event that your apartment requires extensive repairs, you will need to get in touch with the housing inspector. All necessary paperwork, outlining all modifications, including the addition of a heated towel rail, must be submitted. After reviewing and approving your project, the housing inspection will allow you to proceed with the case.

The transfer of a water heated towel rail

This device comes in two varieties: electric and water. First, take into account the characteristics of the water heated towel rail transfer, as this is a more intricate and time-consuming process than in the second scenario.

You can complete this task on your own if you have the required equipment and abilities, but you must proceed with extreme caution because it will be very difficult to correct mistakes once you start.

The parts of the water device are as follows:

• the system on which water is supplied;
• special traffic jam;
• brackets for attaching to the wall;
• air circuit valve;
• Water overlapping valves.

It is important to mention that the device can run on both the heating system and the system that brings hot water into the apartment. Naturally, the second option will be better because heating is only provided for a maximum of six months of the year. During the remaining months of the year, heated towel rail use cannot be discussed.

Furthermore, it is much simpler to obstruct the hot water supply system than the heating system in the event of a malfunction. You’ll save yourself a lot of effort and have a lot of comfort later on.

You’ll need tools like a grinder, a welding machine, etc. to complete the transfer. D.

Crucial! This is by no means the easiest kind of installation work that is accessible to everyone, so it is best to contact a specialist if you are unsure that you can complete the task correctly or if you lack the necessary experience. Moving a heated towel rail that runs on electricity

Transfer of an electric heated towel rail

Compared to the earlier cases, this one is considerably simpler. It will be perfect next to where the power source is supposed to be transferred because you won’t need to run any more wires there. When choosing a location for your heated towel rail on a different wall, that is exactly what you need to consider.

If the wire needs to be laid, you will have another option regarding where to put it: directly on top of the cladding or underneath it. Though more challenging, the first option is far more dependable. The second option is available if you need to complete the task more quickly and easily and no additional repairs have been made to the bathroom. It also removes the requirement for finishing work to be done after moving a heated towel rail to a new location.

The fundamental task at hand essentially consists of taking the device out of its previous location of attachment and moving it to a new location that has already been drilled with a special holder drill bit.

Instructions for transferring an electric heated towel rail

1. Choose a suitable place. It should be located above the water source by 60 cm.
2. Spend electricity to the installation area. The wiring can be hidden under the cladding or placed on top of it. In the case of choosing the last option, the wiring is hidden behind a decorative finish, and the socket is chosen with a protective lid.
3. Dismantle the device from the old surface. This must be done to carry out the transfer of a heated towel rail to another wall. It may be required to be a grinder with which it will be easier to disconnect the device from the previous pipes.
4. Provide the grounding of the outlet during the installation of electrical wiring. This is necessary because the bathroom is a room with high humidity.
5. Make holes in the wall to fix the holders.They are needed to install the device, and then connect to the mains.
6. Perform surface finish. Not carried out in all cases.

General provisions

Examine the following key benefits of having a heated towel rail in your bathroom:

• prevents the appearance of fungus, mold and damp;
• supports normal humidity in the room;
• brings the bathroom aesthetic appearance;
• It has a functional value.

It is prohibited to carry out the following actions on your own:

• unscrew the nuts and cut the bolts, dismantle the riser;
• carry out welding work;
• disconnect water supply systems;
• prevent water passage into other residential premises;
• reduce water pressure by blocking water supply pipes.

Observe whether any concealed wiring or pipes are present. Making the "internal" wiring connections is advised.

In order to do this, the cable must be laid and the walls must be preserved throughout the repair process. However, a plastic box can be used to overcome this circumstance. Every outlet needs to be covered for safety and kept closed.

The design and kind of pipes should be chosen based on technical capabilities and available space. It has been observed that the heated towel rail’s larger heating area results in higher heating expenses and a strain on the heating network.

In the construction market, models with an electric power supply are highly prevalent. You can regulate the temperature by turning on the heating during the winter and off during your absence.

The wiring for an electric heated towel rail must be redone. The main benefits of electrical equipment are ease of installation, ease of use, and tool savings.

It’s crucial to understand that you need permission from the local governing bodies in order to perform repairs on the transfer of a heated towel rail.

Buying a seamless structure for an apartment is the best option because it can perfectly withstand any pressure drops. Brass ones are used in private homes because they are easier to use and provide superior heat.

What stages of work can be distinguished

The installation of a heated towel rail in the restroom is done gradually. The following order of events is identified:

1. Old equipment is removed. To do this, you need a grinder, it is removed old devices. It is important to cut off the pipe correctly, since the rest will have to mount new equipment.
2. Communication is tested, a bypass with a crane is installed.
3. The laying of the pipeline undergoes. Work goes from a new heated towel rail to the riser. Когда расстояние до нового полотенцесушителя увеличивается, то проводят гидротехнические подсчеты заново. Then it becomes possible to immediately place the pipe correctly. If there are errors in the installation process, then the element will not warm up and maintain a certain temperature level.
4. Some hide the pipeline under special materials, erect a falsehood. This method of covering the pipe takes a lot of time.
5. Before attaching a heated towel rail, mark its future location with a pencil. After that, you can connect the necessary element to the pipeline.

Make sure to test the heating device in a different location. If everything functions as it should, you can do any necessary repairs in the bathroom.

Construction transfer as a design solution

Small and tidy models are becoming more and more popular as the world becomes progressively more minimalistic.

There are numerous benefits to such a gadget:

• Great view;
• Takes up little space in the bathroom;
• It is cheaper;
• Due to small sizes, with poor pressure of hot water, it will be the same hot

One of the drawbacks is that this kind of gadget isn’t appropriate for every type of bath. Such an unit will be disproportionately small for large baths.

Using a heated towel rail as décor

Towels can be made to order by some companies. You can hire a designer to create a device based on your sketch, the required size, and the color scheme. It will neatly fit into the bathroom’s interior. Color models complement the bathroom’s cheerful color scheme interior design.

A model made of stainless steel is preferable for standard bathrooms.

Over the washing machine will be the ideal location for the installation. Plumbing equipment and household appliances must be at least 60 centimeters apart, per SNiP regulations.

Preparation and choice of place

It is essential to reach an agreement with the entities handling the housing stock’s communications before transferring a heated towel rail. The multi-story building’s entire heating system is altered when the device is moved inside the apartment. As a result, authorization from the management company is required. It is advisable to consult specialists as the installation of a new heated towel rail in a different location may alter the hydrodynamic characteristics of the system.

It is advised to consider the area above the washing machine when deciding where to install the device. This placement is thought to be the best choice.

When opening, the cover shouldn’t come into contact with the heated towel rail if the car is front-loaded.

You should use common sense and the SNiP guidelines as a guide when deciding where to relocate a heated towel rail:

• The heated room in the bathroom is located at a distance of at least 0.6 m from any equipment;
• If the device has an U-shaped shape, it is placed at a height of at least 1.1 m, and the M-shaped one is not lower than 0.9 m;
• A vertical device in the form of a staircase is attached in such a way that you can reach its upper part;
• The place for a heated towel rail is selected taking into account the convenient supply of communications;
• It is necessary to install locking valves and a bypass – a tube jumper of the device – in order in unforeseen situations you can block the water supply through your device and at the same time not to turn it off among the neighbors;

• When replacing old pipes with new diameter, it should be the same or more, it is also necessary to reduce the length of the eyeliner if possible;
• so that the new pipeline can withstand high water pressure, steel pipes are selected without seams, and polypropylene pipes with a layer of aluminum;
• To prevent the appearance in the system of air plugs, large levels of levels should be avoided, for which pipe laying is done with small slopes;
• The design of a heated towel rail is selected convenient for connecting to the supply pipes, and the connection thread should be the same (it may differ in imported models).

Apartment heating units in multi-story buildings are made of stainless steel and have no seams. Private homes are better suited for brass products because hydraulic boards in pipelines are less common.

It is advisable to notify the neighbors about the temporary shutdown of hot water before transferring a heated towel rail. After reaching a deal with the management company, hot water is layered over a riser.

How to choose a heated towel rail

You should consider import devices when selecting an installation. The market is in demand for models manufactured in Germany and the Czech Republic because they are superior to those produced domestically.

The market is in demand for models manufactured in the Czech Republic and Germany since they are superior to those produced domestically.

Seamless models should be given special consideration when making a selection.

When making a decision, we consider that brass products, which are more costly, are the best options.

However, if you reside in a country home or cottage, trust dried towels and heating to brass or black metal stands. A device of that caliber would not break for over twenty years.

Let’s view this video to learn how to select the ideal model:

Tips for the transfer of heated towel rails

The following advice should serve as your guide to ensure that the transfer of your heated towel rail goes smoothly:

1. Buy a high -quality and convenient device for the bathroom, so that you do not have to repair it later or change it again.
2. If necessary, turn off hot water on the riser, be sure to warn your neighbors in advance so as not to aggravate relations with them.
3. So that the pipes do not spoil the interior of the bathroom, it is recommended to deepen them into the wall or hide them under decorative trim.
4. Start approving the project to transfer the heated towel rail as early as possible, before the start of repair work.
5. Make threaded joints in the places to which unhindered access will be provided, then the maintenance of the pipes will pass without trouble.

It is possible to swiftly and effectively move the heated towel rail’s tower by following the provided instructions. You will be happy with the work that was done. Ultimately, the newly installed bathroom appliance will function efficiently, heating the space and completely drying the towel.

The week’s most read blog entries

• How to put a quality fireplace?
• Than and how best to insulate the balcony
• Instructions for the insulation of external walls with polyurethane foam
• Technology of insulation of interpanel sutures
• The foundation device for the fireplace
• Calculation of the number of bimetal radiator sections
• House heating schemes

The nuances of the transfer of equipment

When working on the device transfer, the following regulations must be taken into consideration:

• The design and shape of the device must correspond to the side of the location of the supply communications and the number of free space intended for installation.
• The heated towel rail should be equipped with a so -called bypass – a tube jumper of the contour of the device with a crane. It is necessary to maintain the performance of the heating system in the conditions of a sudden emergency situation.
• In the area of Bypas, locking taps are mounted on both sides. Their use makes it possible to carry out the necessary repair and maintenance of the device.
• New communications should have a minimum length and cross section equal to the pipe diameter of the pipe.
• The installation of equipment should be carried out without significant levels of levels, which can lead to the formation of a hydrodynamic air cork. Therefore, the laying of the pipeline is recommended horizontal with the performance of a small slope in the area of fixing the device.
• The pipes used for transfer should belong to the category of “heating”, that is, withstand strong warming up at high pressure.

The essential component for installing a heated towel rail is a bypass.

Rules for transferring the structure

If you are not an expert in plumbing and you wish to perform all the tasks involved in installing a heated towel rail on a different wall, you should be aware of the following guidelines that must be properly followed:

1. The shape of the design should fully correspond to the features of the surface on which heating communications are located. In this case, the heated towel rail should not occupy the entire free space of the site of the room reserved for its installation.
2. In no case do not neglect the installation, it would seem insignificant at first glance, but in fact an extremely important detail – bypas. In the event of an emergency, it will fully maintain the performance of the heating system.
3. Two locking taps are necessarily mounted on the edges of the bypas. Their task is to provide the possibility of local repair of the system without the risk of damage to structural elements.
4. The installed communications should have a minimum permissible length, as well as a cross section that coincides with the diameter of the heating pipe. Water heated towel rail
5. During installation, there should not be sharp levels of level, since during the operation of the heating system this can lead to a hydrodynamic air traffic jam. It is advisable to mount the pipeline horizontally with a small angle in the area of fastening of the heating structure.
6. The pipes used for installation in the heating system must meet certain requirements, otherwise they will not withstand the thermal load.

Though the setup and direct installation of a heated towel rail may appear straightforward, accuracy is crucial throughout the process, so don’t assume it is. Enough of even the smallest pressure differential or irregularity in the system to cause it to malfunction. As a result, pay close attention, exercise extreme caution, and adhere to the above guidelines. Wishing you luck!

Functions of a heated towel rail

One small but very useful device in the bathroom is the heated towel rail. Apart from its primary function of drying the apartment’s towels, the heated towel rails also provide warmth to the room by shielding it from extreme humidity, thereby averting the growth of mold, fungus, and disagreeable smells. The bathroom’s coil helps to create a comfortable environment for showering.

The project covers the installation of a heated towel rail in the majority of standard Soviet-era homes. It was most frequently placed directly over the sink, which is really inconvenient. In this instance, moving the heated towel rail to a different wall and replacing it with a contemporary model—which is not only aesthetically pleasing but also incredibly small, meaning it won’t take up much room in small bathrooms—will suffice to remove the heated towel rail entirely.

It is not necessary for any instances to coordinate in order to move the heated towel rail to a different wall.

But at the same time it must be remembered that any intervention in the initial layout of the dwelling is considered a redevelopment. The transfer of the coil is in no way reflected on the stages of the BTI. Therefore, in order to remove and transfer it to another wall, no coordination is required with the relevant organizations. To do this, just get permission in the management company, after which you can immediately start work. Despite this, in some cases it may be necessary to coordinate the work. To do this, a full package of documents is collected, which necessarily includes: a copy of the personal account, an extract from the house book and the poetry plan with explication.

In order to acquire authorization for the coil to be transferred, the following actions must be taken:

• draw a project;
• substantiate the need to carry out such work;
• choose materials and argue your choice;
• attach data on the hydraulic and thermal connection of this system to the project.

Crucial! It will save a great deal of time to coordinate the transfer of a serpentine in the restroom in accordance with the sketch.

In this instance, all modifications are shown in copies of the poem plan, which is credited to the housing inspection along with all other documents. It will be possible to remove the heated towel rail from the previous location once its employees give their approval.

Electric varieties

Let’s begin with an easy one. There won’t be any issues if the restroom has a heated towel rail that draws electricity from the grid. Such equipment is prohibitively easy to install: a plug is connected to a socket and the product is held on the wall using specialized mounts.

When moving this kind of equipment, the location of the product in relation to the power source and its distance from the product should be the most crucial considerations. To maintain security, the final point needs to be adhered to.

Keep in mind that using an electric device in a bathroom with constant high humidity increases the risk of injury. As a result, the placement issue needs to be handled with extra caution. There should be a minimum of 60 centimeters separating the closest water source from the heated towel rail.

After deciding on the installation location, gather all required tools:

• wrench of different sizes;
• screwdrivers;
• shock drill or punch;
• drill suitable for the performance of concrete work;
• roulette and marker for marking;
• Fasteners, which are usually included with new equipment.

We then proceed to disassemble the previous product. Take the shtepsel out of the outlet and take the wall-mounted equipment down. Next, remove the mounts that supported the heated towel rail from it.

Mark the spots on the wall where the fasteners will be positioned in the area where you intend to hang the new product or move the old one. Make sure the building level is checked during the process to ensure an aesthetically pleasing end product.

Drill the designated locations in the wall. If there are tiles covering it, work should be done very carefully to avoid damaging the tiles. In addition to a perforator, you’ll also need a standard drill and a ceramics-specific drill bit for this task. He ought to have a very tiny diameter and diamond spraying.

Start by scraping the glaze at the designated spots. This is required to prevent the drilling nozzle from slipping on the wall’s surface. Next, drill a hole using a standard drill bit that is thin. Use a punch and nozzle with the appropriate diameter to drill through the tile, then adjust the hole’s width and depth.

Next, screw the towel rail into place by inserting fasteners into the holes that have been prepared. In actuality, this completes the process of transferring to a different wall. However, it is crucial to consider an additional nuance.

Additionally, he is related to the security topic. While risks are lessened, they are not entirely eliminated when the required distance to the water source is observed. The bathroom’s equipment is essential for consistently avoiding the threat.

If grounding is already in place, that is great; if not, lay the tire and connect it yourself. It’s not that hard to accomplish this. However, this is a very different story, with which you are already familiar from other articles on our website.

Once the heated towel rail has been installed correctly and any safety concerns have been addressed, you can plug Shtepsel into the outlet without risk and take advantage of the warmth and comfort it provides.

High -quality transfer of a heated towel rail

To get a special permission, the first thing to do is visit the housing office. The truth is that you will need to turn off the heating system in order to complete all of the work, and you are not permitted to do this without the consent of housing and communal services employees. It’s also advisable to talk to your neighbors about the potential for long-term heating system disconnections.

Once every detail has been removed, you can move on to disassembling the outdated bathroom heating system. Naturally, you must first cut off the hot liquid supply. If the model is electric, you must also stop the heating device from connecting to the network.

With a grinder, you can now begin dismantling with peace of mind.

It is important to carefully disassemble the heated towel rail so as not to cause any damage to the wall during the process. In many old homes, it has been hanging on the wall for so long that getting it off is very challenging.

Because of this, it is best to take it apart before beginning any bathroom repairs to avoid destroying the progress that has already been made.

How to prepare for work on replacing or transferring a heated towel rail to the bathroom to another wall

You should first get your tools ready:

• Perforator
• Basis for work on concrete
• Electric tester

It is a good idea to have fasteners, roulette, screwdrivers, and markers ready.

Ideal location for installing a heated towel rail

It is important to pick the ideal location for installation; as was previously mentioned, a heated towel rail should ideally be installed above the washing machine, approximately 120 centimeters away from the pipeline.

Once the installation location has been established, it needs to be marked with a marker. A power source (socket) should ideally be located close to the installation site. However, you will need to lay a separate wire for our device if no one else is there.

To lay a new outlet, there are two methods:

• With the full repair of the bathroom, a reliable option will be the laying of the wire under the facing coating.
• You can also carry out a wire right on the cladding, but it will not be so safe. The first option, although more complicated and is more time -consuming, will be much more reliable than the second.

The device must then be disassembled from its original installation.

We drill new holes for the device’s fixing system in the designated location. Installing the fastener and mounting the device are the only tasks left to complete. following completion of the work.

We recommend watching this fascinating video about how to install a new heated towel rail:

Video-instruction on the transfer of a heated towel rail

Several pointers from a seasoned builder:

If you are not a novice in engineering, your only options are to rely on your own abilities, knowledge, and clear guidance. It is entirely up to you whether or not you want to buy an electric model in order to simplify your life and save money on electricity bills.

Procedure for transferring a heated towel rail

• If the replacement and transfer of a heated towel rail occurs and there are no locking taps, then it is necessary to turn off and drain the entire highway.
• Prepare the bends of the required shape and length and connect them to the highway. In the manufacture of bounces, it is advisable to use a pipe of the same diameter as standard bends on the highway.
• A bypass is installed on the bends at a distance of 0.5 m from the junction of the heated towel rail.
• When using the bypas, locking taps are installed. If there is no bypas. then it is advisable not to install the taps.
• Connect a heated towel rail using decorative accessories.
• Check all compounds for possible leaks.

Furthermore, you can provide a number of useful advices:

• Dishasis and bypass should be made from the same material as the trunk pipes to prevent electrochemical corrosion.
• The diameter of the pipes of new bounces and bouncers installed on the trunk should be the same for reducing the hydraulic power of the system.
• If the bypass is not provided, then you should choose a heated towel rail with an internal diameter as much as possible, so it is possible to exclude hydraulic boards in the system.

How to transfer an electric heated towel rail

Since an electric heated towel rail is a traditional heating device, moving it from one wall to another in the bathroom is the easiest. For this, you’ll need:

An electric heated towel rail’s approximate dimensions are shown in the scheme.

1. Choose a new suitable place for a device that should be no closer than 60 cm from the washbasin, shower, bathroom and other water sources.
2. Electricity is summed up to the installation site. This can be done both in an open and closed way (installation of a socket or laying of a wire under the finish).
3. Dismantle the old heated towel rail.
4. Install the device in a new place and connect to the power supply network.
5. Carry out the necessary decorative finishing work.

Because of the higher humidity in the bathroom, it is important to consider the electrical appliance’s safety. Every electrical task, including grounding and installing an assault rifle machine in the electrical panel, should be done with quality.

Since an electric heated towel rail is not connected to the water supply, it is not a very complicated transfer. It is simple to move a heated towel rail of this kind to a different bathroom wall.

Over a water bath, the electric heated towel rail has the following benefits:

1. Easy installation.
2. The ease of self -adjusting the temperature, you can make it as necessary.
3. The possibility of independently turning on and off the device, regardless of the time of year and heating season.

It is important to consider both the effectiveness of the air exchange system and the room’s heating system when determining the ideal humidity level in the bathroom. It will work far better if forced ventilation is installed.

Go back to the contents table.

Optimizing the heating system in your home can benefit greatly from even seemingly minor adjustments. Although moving a heated towel rail to a different wall might seem like a small change, there are a number of advantages to consider. Moving your towel rail is a sensible fix if you’re remodeling your bathroom design, increasing airflow, or just trying to improve the overall efficiency of your heating system.

Improving the distribution of heat is one of the main benefits of moving a heated towel rail to a different wall. You can make sure that the heat is dispersed equally throughout the space by carefully positioning the rail in a new spot. Especially in the winter, this can help remove cold spots and make the space more comfortable.

Shifting your towel rail can not only improve heat distribution but also your room’s overall appearance. You can create a more visually appealing layout that goes well with your bathroom design by carefully choosing the new location. You can change the look of your room to better suit your tastes by moving the towel rail, whether you go for a sleek, minimalist appearance or a more traditional one.

In addition, moving a heated towel rail to a different wall may be advantageous in terms of convenience and usefulness. For instance, relocating the rail to the bath or shower area can facilitate easier access to warm towels at the most convenient time. Towels can also dry faster and more effectively if the rail is moved to a more central location in the space.

All things considered, the potential advantages outweigh the time and effort required to move a heated towel rail to a different wall. To make your living area more comfortable and useful, moving your towel rail can help you achieve your goals of better heat distribution, improved aesthetics, or increased convenience.

Video on the topic

Room. Installation of a heated towel rail. Grounding a heated towel rail.

Transfer of a heated towel rail to another wall

Proper wiring of pipes for a heated towel rail