The toilet is clogged – what to do? We will learn how to independently eliminate the blockage in various ways

One typical home problem that can be annoying to deal with is a clogged toilet. A clog can interfere with daily life, whether it is the result of an underlying plumbing issue, too much toilet paper, or foreign objects. The good news is that you don’t always need to call a plumber to clear a clogged toilet. This post will go over a few do-it-yourself techniques for unclogging a toilet and getting it back to working order.

Prior to getting into particular techniques, it’s critical to comprehend the causes of toilet blockages. Blockages are frequently caused by flushing inappropriate materials down the toilet, such as paper towels, sanitary products, or an excessive amount of toilet paper. Toilet blockages can also be caused by mineral accumulation, tree roots getting into underground pipes, or problems with the sewer line. Sometimes the best way to solve an issue is to determine its root cause.

Making use of a plunger is among the easiest techniques to attempt. A plunger is a common household item and is useful for clearing small blockages in toilets. As a toilet plunger is specifically made to form a tight seal around the toilet drain, use it with caution. Make sure the plunger is completely submerged in water before using it over the toilet drain. Next, create suction by gently pushing and pulling. By doing this, the obstruction may be broken up and the flow may be restored.

Using a toilet auger or snake is an additional technique to think about if the plunger is ineffective. In order to clear more stubborn clogs, this instrument is made to reach farther down the toilet drain. To move the auger through the pipes, place it inside the toilet bowl and rotate or twist the handle. Take care not to use excessive force because you don’t want to break the porcelain. Move the auger gently to split the clog once it has reached it.

If your clogs won’t go away with plunging or snaking, you can use a store-bought or homemade drain cleaner. Chemical drain cleaners, however, should be used with caution as they can be abrasive and possibly harm your plumbing. Instead, think about using natural substitutes like vinegar and baking soda or enzymatic cleaners. These can occasionally decompose the organic material that is clogging the pipe.

When all else fails and the clog still doesn’t go away, it might be time to hire an experienced plumber. They possess the knowledge and equipment needed to identify and fix more complicated plumbing problems that might be the source of recurring toilet clogs. Recall that keeping your plumbing in good condition and preventing future toilet blockages can be achieved through routine maintenance and careful flushing practices.

Dealing with a clogged toilet can be a frustrating experience, but there are several simple and effective methods you can try before calling a plumber. Firstly, using a plunger is often the quickest way to clear a blockage. Make sure there"s enough water in the bowl to cover the suction cup of the plunger, then firmly push and pull it to create pressure and hopefully dislodge the clog. If the plunger doesn’t work, consider using a toilet auger, which is a tool designed specifically for clearing toilet clogs deeper in the pipes. Another option is a homemade solution using a mixture of hot water and dish soap or baking soda and vinegar, which might break down the blockage. Remember, patience is key—sometimes it takes a few attempts. If these DIY methods don’t succeed or if you suspect a more serious issue, it"s wise to contact a professional plumber to avoid causing further damage.

The toilet is clogged – common reasons

There are several causes of clogs in the sewage system. The most frequent ones involve the entry of big objects that impede water flow and lower pipeline flow rates.

IT IS CRITICAL TO ASK! Sometimes, though, the cause is a poorly executed design or outdated technology used during system installation. These kinds of malfunctions typically show up right at the start of operation. On the other hand, they might appear later. Another frequent issue that results in blockages is the buildup of a salt sediment layer.

The pipeline’s throughput will gradually decline if these deposits are not removed in a timely manner, which will lead to clogging. Typically, it is very challenging to locate traffic bottlenecks.

It is probably not going to be feasible to swiftly remove the obstruction’s causes if they turn out to be mistakes made during pipeline installation. The use of fast-quality fasteners and sagging pipes, where liquid can stagnate and freeze, are common causes of blockages.

One common cause of water stagnation in the rotary sections of the pipeline is incorrect system design. When slope characteristics are not followed, the situation frequently results in clogged toilets.

You should follow the operating procedures to steer clear of such issues. Only toilet paper should be used for rinsing; it dissolves in water. The lowering of any other item is forbidden.

SUGGESTIONS! Additionally, it is not advised to use the leftover fat from cooking and brewing in the toilet. These substances have the potential to cause the fat layer to form, which can clog the sewage system.

How to find a place for a clogging

The sewer riser, which is found in the kitchen and toilet, should be checked first. It should be mentioned, though, that the riser is frequently shared by multiple apartments. As a result, if you live in a multi-story building, there is a chance that a traffic bottleneck will arise for reasons unrelated to the apartment owner.

You can verify this by simultaneously turning on the kitchen faucet and lowering the toilet’s water level. If the liquid flows through without any issues at the same time, then blockages are uncommon. If not, the neighbors would clog the pipes.

A blockage point in a suburban home or cottage is typically found where the sewage pipeline enters the drain hole or where each individual sewer branch is connected to the main line.

Cleaning the toilet bowls with folk remedies – soda, vinegar, boiling water or mustard

The first thing that residents think of when a problem occurs is, "What needs to be done if the toilet is clogged?" Since it’s best to destroy the cork as soon as possible, many people start with folk remedies.

While there are numerous similar techniques, using soda, vinegar, boiling water, and mustard is the most widely used.

How to use boiled water to independently clear the obstruction in the toilet:

1. Boil 1 bucket of water.
2. Pour the liquid in the drain at the 90-degree angle. You need to do this very quickly.
3. If the method works and the liquid is gradually passing, it is recommended to repeat the previous steps 2-3 times.

Soda is the next available option. Since this material is an alkali, it can prevent small plugs from clogging the pipeline. Guidelines:

1. Prepare half a pack of ordinary baking soda.
2. Pour the substance into the drain hole.
3. Wait 3-5 minutes.
4. Lower the water.

It is possible to clear simple blockages with soda and boiling.

The following approach, which combines the earlier ones, is more successful. It must get boiling water, food soda, and acetic acid ready for him. The actions’ algorithm:

1. Remove water from the toilet, leaving only a small volume in the drain hole.
2. Fall asleep as deep as possible in drain 0.5 packages of soda.
3. Pour a glass of acetic acid.
4. Wait 20 minutes.
5. Pour boiling water.

One variation of this technique is the following scheme:

1. Pour half a pack of baking soda into a drain hole.
2. Pour into concentrated acetic acid inside (the entire bottle).
3. Close the drain.
4. Leave for 2 hours.
5. Pour hot liquid.
6. Wait until dirt and fine debris is dissolved if it was the reason for the formation of a blockage.

It is crucial to remember that boiling water may not always clear the obstruction. Boiling water cannot be poured through a corrugated plastic pipe used in the connection design to the sewage system.

It is preferable to use hot, but not boiling, water in such circumstances. Also, you want to use vinegar with the utmost caution.

Instead of using acetic acid, you can use salt:

1. Mix 1 cup salt and 1 cup of soda.
2. Fall asleep the resulting substance in the toilet.
3. Pour 1 liter of boiling water.
4. Leave for 7-9 hours.

The most effective method to use at night. The formed blockage should disappear by morning.

Another common cutting technique is mustarding. Guidelines:

1. 10 liters of water heat to 80-90 degrees.
2. Add mustard in the amount of 5 teaspoons to the water. If another volume of fluid is heated, then the ratio should be used: for 2 liters of water – 1 hour. l. mustard.
3. Pour the solution into the toilet.
4. Wait 2-5 minutes.
5. Rinse.
6. If required, carry out this procedure a couple of times.

Occasionally, looking for a response to the query, "What to do if the toilet is clogged?"Homeowners choose to use "Feyri" detergent or Pepsi-Cola.

Nevertheless, Pepsi Cola is only effective in eliminating stains from plumbing fixtures; it cannot be used to clean drains.

Fairy detergent only works in cases where a substantial layer of fat—often present in clogs in kitchen sinks—became the source of the obstruction in the toilet. After that, you can pour into the drain half a bottle of detergent.

However, using Fayri in the fecal sewer system will typically not have the desired effect.

It is important to remember that such methods can only help with small traffic jams. In the presence of more serious problems, it is recommended to consult a plumbing that will apply mechanical cleaning methods.

Mechanical methods – vantuz, plastic bottle, plumbing cable or hydrodynamic cleaning

Apart from traditional cures, there exist mechanical techniques that enable prompt and efficient removal of the obstruction in the sewer system. When inward accumulation of extraneous debris was the cause of the blockage, their use is advised. How to unclog the obstruction in these situations:

• rubber plunger;
• plastic bottle;
• plumbing cable;
• Hydrodynamic cleaning device.

Clogging removal using a vantuse with a cone-shaped nozzle and a 10-cm section:

1. Fill water plum water.
2. Put the tool in the drain.
3. Holding a plunger for a wooden handle, make several pressing movements.
4. Drain the plum.
5. If required, re -carry out the procedure.

There are instances when the absence of vantuses in the home is troublesome. In this instance, a regular plastic bottle with the bottom cut off can be used in place of this tool. Guidelines:

1. Close the bottle (volume – 1.5-2 liters) lid.
2. Cut off the bottom, this will turn the structure into a kind of air bell that can advance the cork further.
3. Put a bottle in the drain and make several reciprocating movements, like the fact that they are produced when using a plunger.

Using a plumbing cable, the obstruction in the toilet can also be promptly removed. This apparatus features a rotating handle, a flexible base, and a half axis. A spiral-shaped process at the tool’s working end is attached to the cable by means of a small, flexible tube. The following guidelines must be followed for cleaning:

1. In the drain, to put the end of the plumbing cable.
2. Slowly turn the hilt, thus pushing the cable into the water -bearing mechanism.
3. When the plug is eliminated, it is necessary to pour hot water into drain.

It is not possible to use a regular construction cable to clean the toilet if the plumbing cable needs to be borrowed or purchased. Nonetheless, it’s crucial to select the appropriate tool length and diameter when making a purchase.

In most cases, 9 mm of diameter is sufficient for apartment plumbing. This kind of cable is used to break through the cork and can take the shape of a small weight or a spiral.

When plumbing, a cable with a metal tip is typically used. Similar designs enable you to successfully clear obstructions and descend further into the pipeline.

Additionally, models composed of special steel are more dependable and long-lasting. Their primary benefit is that the tool can be used to clean plastic pipes in addition to metal pipelines.

If using conventional and mechanical cleaning techniques does not result in an improvement in the situation, you should contact a plumber. Not the toilet, but rather a clogged sewer pipeline is most likely the cause. Typically, a specialist who removes blockages uses specialized equipment, such as a hydrodynamic cleaning device (see how to do it yourself).

What to do in the event of a clogged toilet is demonstrated in the video.

Although dealing with a clogged toilet can be annoying, you can try a few do-it-yourself solutions before contacting a plumber. Always put safety first. Avoid flushing too frequently as this may result in overflow. To avoid flooding, turn off the water supply to the toilet as soon as you notice the water level rising.

A good technique is to use a plunger. Make sure the plunger’s rubber portion is submerged in enough water in the bowl. After firmly positioning the plunger over the drain hole, gently press down and then pull up sharply. Do this multiple times. The blockage can often be removed by the pressure that is created.

Consider using a homemade drain cleaner if the plunger is ineffective. Pour a solution of equal parts vinegar and baking soda down the toilet. Give it a half hour or so to sit. Next, fill the bowl with hot (not boiling) water. Occasionally, the mixture’s fizzing action can dissolve the clog.

An auger or plumbing snake can be utilized to clear more difficult blockages. Push the snake forward and twist it as you insert it into the drain. This ought to assist in dislodging or extracting the clog-causing obstruction. To prevent breaking the porcelain, use gentleness.

If none of these fixes resolve the issue, it might be necessary to hire a licensed plumber. With their specialized equipment and knowledge, they can safely handle more significant blockages. Always remember that prevention is key. Steer clear of flushing things that can easily cause blockages, such as paper towels, sanitary products, or too much toilet paper.

Often, you can clear a clogged toilet without having to pay for expensive repairs by using these steps. Feel free to experiment with these techniques on your own, but remember to put your safety first and recognize when to get expert assistance. You can maintain the smooth operation of your toilet and save yourself needless hassles with a little perseverance and the appropriate technique.

Video on the topic

How to eliminate blockage in the toilet 100 % method!!! I tried all the ways! Only this one helped!!!

How to clean the toilet! The most effective way to clean the toilet! How to eliminate blockage in the toilet

The toilet clogged? 4 ways to quickly eliminate the blockage 💥 (always works) 🤯

The toilet was clogged, the water does not leave what to do? How to clean the blockage?