The cheapest insulation for walls

Comfort and energy efficiency depend on keeping your house cool in the summer and warm in the winter. Insulating your walls is one of the best ways to accomplish this. Wall insulation minimizes environmental impact, lowers energy costs, and aids in temperature regulation indoors. Finding the least expensive wall insulation can make all the difference if you’re on a tight budget.

There are a few things to think about when choosing the most affordable insulation for your walls. Every kind of insulation has advantages and disadvantages of its own, along with different prices. You can make an informed choice that fits both your budget and your energy efficiency objectives by being aware of these factors.

One of the least expensive options for wall insulation is frequently promoted as fiberglass insulation. This kind of insulation is widely available and reasonably priced to install because it is made of tiny glass fibers. Fiberglass insulation is a popular option for do-it-yourself projects because it is lightweight and simple to work with. To prevent respiratory problems and skin irritation, fiberglass insulation must be handled carefully.

Cellulose is another reasonably priced wall insulation material. Since cellulose insulation is created from recycled paper goods like cardboard and newspapers, it is a green option for homeowners who care about the environment. Aside from being reasonably priced, cellulose insulation has good thermal efficiency and can lessen noise transfer between spaces. Like fiberglass, though, the secret to maximizing its effectiveness is proper installation.

If you’re searching for reasonably priced wall insulation, you should also think about spray foam insulation. Spray foam insulation has better air sealing and energy efficiency than fiberglass or cellulose insulation, but it is typically more expensive initially. For many homeowners, this can mean long-term energy bill savings, making the investment worthwhile. Furthermore, spray foam insulation can seal wall voids and fractures, offering a more complete approach to thermal protection.

The least expensive wall insulation will ultimately depend on a number of variables, such as your spending limit, the size of your house, and your objectives for energy efficiency. Through careful consideration of the advantages and disadvantages of various insulation options and expert advice, you can identify the most economical solution that fulfills your requirements and ensures year-round comfort in your home.

Review of inexpensive thermal insulation materials and their description

1. Thermal insulation of glass water.

Glass combat, sand, dolomites, and soda are used to make glass wool. Since its fiber insulation is longer than that of basalt, it is more elastic and can return to its original structure more quickly and effectively. It undergoes three compressions while being packed. +450 °C is the maximum temperature for use. The non-combustibility of glass water insulation for walls is one of its best features. It shrinks in size when a steady flame enters it, but the fire cannot spread farther.

Benefits of glass wool insulation include:

  • long life (subject to installation technology and rules of use);
  • vapor permeable;
  • does not support the growth of mold and fungi, and insects and rodents do not live in it;
  • Thanks to the elastic structure, it does not provide shrinkage throughout the entire service life.

There is absolutely no chance of condensation on the walls because glass water thermal insulation has the ability to remove moisture from the air on its own. It can be used for both wood frame and brick private home insulation. It is important to keep in mind that installing inexpensive heat insulation made of fiberglass requires the use of personal protective equipment. Due to the fact that it releases a lot of dust after being transported, unpacked, and laid out. You will experience coughing and skin irritation if you ignore these precautions.

Thermal conductivity coefficients of glass wool and basalt insulation are the same. For wall insulation, thermal insulation in the form of plates should be purchased, since it is more difficult to lay rolls on the wall and over time they will begin to sag. To install the plates, the construction of the frame is required. The distance between the bars in it is made the same as the width of the plates (most often 60 cm). If the insulation for walls is mounted outside the private house, then it is closed by a windproof membrane. This is necessary so that its fibers are not blown by the wind, and atmospheric precipitation does not fall. If the plates are installed from the inside on the walls, then they are closed with vapor barrier. Thanks to her, the insulation will not pull moisture from the room, and the moisture that is in it will be able to go out.

Because glass wool is made using a glass fight, it is a cheap form of thermal insulation. However, the insulation of businesses that manufacture their products entirely from natural materials (quartz sand) will cost a lot more.

2. Mineral wool made of basalt.

By melting the ore of gabbro-basalt rocks, stone cotton wool is created. Basalt mineral wool is resistant to the effects of high temperatures—more than +800 °C—because of this manufacturing technology. As a result, it can be used to thermally insulate areas that are always heated, like fireplaces and stoves. It prevents the fire from spreading further and, unlike glassy insulation, does not deform when exposed to fire (refers to plates).

Basalt mineral wool carries moisture well, much like glass wool. Compared to foam, it has a vapor permissive indicator ten times higher. Professional builders’ reviews indicate that it performs better than other thermal insulations that are appropriate for insulating private homes made of wood. However, its disadvantage is also its feature. The stove must be thrown out if water spills onto it. Its thermal insulation properties are greatly diminished even after drying.

Actually a practical, lawful method of saving. This is something that everyone should be aware of!

A high number of air-filled voids between fibers provides a good thermal conductivity coefficient. The effect vanishes if they are adhered. As a result, it cannot be utilized in high humidity environments, such as basements, foundations, and the like. Although not as cheap as glass wool, this wall insulation is slightly more expensive. The least expensive basalt thermal insulation is Izovol, Izoroc, and Greenguard. Basalt mineral wool necessitates the installation of a vapor barrier or windproof layer, just like glass wool.

Benefits of basalt thermal insulation include:

  • does not rot and does not shrink;
  • Holds air noises well;
  • service life for more than 30 years;
  • incombustible.

Wearing personal protective equipment is necessary when working with basalt insulation because it attracts dust. Only store unpacked material under a canopy and send it in a covered vehicle. It is best to use this type of thermal insulation to warm the walls outside the room if the mineral wool contains phenol or formaldehyde.

The foam composed of polystyrene and polyethylene.

Foamed polystyrene is known as polistyle foam. One of the least expensive types of insulation is foam. It conducts heat three times less than mineral wool and has a very low coefficient of thermal conductivity. all because every one of its cells is empty and filled with gas or air. The foam itself makes up only 2% of the total mass; the remaining 98% is made up of air.

However, polystyrene foam has a higher degree of fire hazard G4, in contrast to mineral watches. The degree drops to G1 if antipypees are added to it and carbon dioxide is found in the cells. In any event, he detects a significant amount of black smoke during combustion, which is harmful to both the environment and human health. Since foam is completely vapor permeable, it cannot be used to insulate wooden structures or aerated or foam concrete. However, since umbrella-dowels and adhesive composition are used for installation, the frame need not be equipped.

Foam polymers are made of foamed polymers. It is frequently utilized with a foil side for wall insulation. This allows heat to be reflected back into the space, resulting in a significant reduction in the heat conductivity coefficient. most frequently produced in rolls. For easier installation, polyethylene foam is available with a self-adhesive side.

The cost of insulation

The density, size, and raw materials used in the production of the material all affect how much thermal insulation costs. The price of a heater increases with its density because more resources were needed to make it.

A price table showing the range at which you can purchase an affordable heater made of various materials:

Cheap insulation for external and internal work: characteristics, advantages and disadvantages

The problem of thermal insulation in residential walls has grown in importance as a result of the ongoing increase in energy carrier costs. Determine the vapor permeability of the materials you choose for thermal insulation before making your decision. If not, condensate will build up on the walls and eventually mold will grow.

Both interior and external walls can be easily insulated with materials that have good vapor permeability. Furthermore, you can only use steam-proof material outside of the room.

Choose a cheap insulation

Think about the primary insulation types and evaluate their prices:

Fiberglass is used to create mineral wool, which is used to warm floors, walls, roofs, and flat roofs. possesses strong insulating qualities, but when heated, it separates from formaldehyde and can lead to respiratory illnesses. Starting at 1,500 rubles for a single cubic meter;

Cotton wool made of basalt is safe, has a high density, and works well for insulating roofs. It is not a fuel. Price range for one cubic meter: 1,500–3,500 rubles;

The least expensive insulation is liquid foam, which costs 1400 rubles per cubic meter. However, the range is constrained because they can be near tiny spaces, like cracks and gaps, but not the walls or the floor;

Styrofoam: It’s simple, easy to use independently, and keeps walls warm both inside and out. However, in the event of a fire, the smoke will be extremely caustic. Starting at 1,500 rubles for a single cubic meter.

When it comes to the different kinds of thermal insulation available on the market, foam or polystyrene should be given priority.

Note: Polystyrene is the least expensive material when compared to other heaters, and it doesn’t require costly finishing.

Foam is reinforced as a heater, and then a thin layer of plaster based on a unique adhesive is applied to it. Moreover, any type of building material can be used to decorate the foam. The application of ornamental plasters or standard painting are the best options overall.

Fiberglass insulation Cellulose insulation
Rockwool insulation Spray foam insulation

Selecting the appropriate wall insulation is essential for preserving a pleasant indoor temperature and minimizing energy expenses. We’ve looked at a variety of wall insulation options and associated costs throughout this article. Every type has pros and cons, ranging from foam board and spray foam to fiberglass and cellulose.

Although fiberglass insulation is frequently the least expensive option up front, its level of energy efficiency may not match that of other materials. Because of its superior thermal performance, cellulose insulation is a slightly more expensive but environmentally friendly option that may prove to be a wise investment over time.

Foam board insulation offers an affordable option with good thermal resistance for people on a limited budget. However, since this can affect overall costs, it’s crucial to take into account the installation process and whether professional assistance is needed.

Finally, even though spray foam insulation is the most expensive up front, it turns out to be a very effective option. For many homeowners, it is a worthwhile investment because of its capacity to seal gaps and cracks while offering superior thermal performance, which can result in significant energy savings over time.

In conclusion, it’s critical to consider both the initial costs and long-term energy savings when determining the least expensive insulation for your walls. You can choose the best option for your home and budget in the long run by taking into account factors like energy efficiency and installation requirements, even though some options may seem more affordable at first.

Foam board insulation is the undisputed winner in the hunt for reasonably priced wall insulation. Foam boards are the preferred option for homeowners on a tight budget because they are affordable, lightweight, and simple to install. Foam boards, in contrast to other insulation options, provide exceptional thermal resistance, keeping your home cool in the summer and toasty in the winter without breaking the bank. Foam board insulation offers value for money, offering long-term energy savings and comfort for you and your family—whether you’re doing it yourself or hiring an expert.

Video on the topic

The best and cheapest insulation of the house! There are no equal to him!

Free home insulation

Which insulation to choose for home? Minvata, Ecowata, PIR, Foam? Pros and cons of all heaters

The cheapest insulation! Brilliant replacement of foam!

Builders in shock! The insulation of which has no equal!

What type of heating you would like to have in your home?
Share to friends
Michael Kuznetsov

I love to create beauty and comfort with my own hands. In my articles I share tips on warming the house and repairing with my own hands.

Rate author
vDomTeplo.com
Add a comment