Submersible pump Malysh. Design, types, rules of operation

Adequate insulation and heating are crucial for maintaining a comfortable and warm home. Having effective systems in place can make a huge difference, whether you’re fighting the winter cold or trying to keep the temperature at a comfortable level all year round. A crucial element of numerous heating systems is the submersible pump, an apparatus intended to distribute heated water or other liquids throughout your residence. We’ll examine one well-liked model in more detail in this article: the Malysh submersible pump. We’ll look at its construction, the various varieties that are out there, and the optimal methods for using it.

A dependable and adaptable choice for homeowners wishing to upgrade their heating systems is the Malysh submersible pump. Because of its small size, it can be installed in a variety of places, including wells, tanks, and sump pumps. This pump is small in size, but it has a big punch: it can circulate water or other fluids effectively to give your house a constant temperature.

Knowing the various varieties of submersible pumps is crucial when thinking about one like the Malysh. The power, flow rate, and intended use of these pumps can all vary. While some models are intended exclusively for use with residential heating systems, others might be more appropriate for use in industrial settings. Homeowners can choose the pump that best suits their needs by being aware of the variations among these types.

For any submersible pump, including the Malysh, to function as well as possible for as long as possible, proper operation is essential. Pump maintenance is necessary to keep it operating smoothly, including checking for leaks and clogs. For safe and effective operation, it’s also crucial to adhere to the manufacturer’s installation and usage instructions. For many years to come, homeowners can benefit from dependable heating by implementing these precautions.

Pump application

The pump has many different and extensive applications. It is applied in the subsequent scenarios:

• When watering garden plants on dacha plots or in the yard;
• for pumping water into special tanks and swimming pools;
• in order to organize water supply of residential houses;
• for eliminating the consequences of spring floods or floods.

Pump modifications

The following modifications represent the model range:

Baby (standard)

The water intake device is situated in the pump’s lower section. The pump typically removes flooding from cellars and buildings by pumping water from open sources that are located far away. It is not advised to use the pump in highly polluted water bodies to prevent pump breakage.

Baby-K

In contrast to the first model, this one has an integrated thermal relay that turns the pump off automatically if it overheats. With the help of this feature, you can perform household tasks while the device pumps water, rather than watching it operate. This modification’s pump casing might have the letter "P" written on it. This letter indicates that plastic makes up the casing.

In the event that no such designation is present, it indicates that the "Baby" pump body is made of aluminum, which increases operational reliability.

Baby – M

The suction device is situated in the upper portion of the device, which sets it apart from the earlier models. Other technical specifications are comparable to those of the earlier models. This submersible pump performs admirably in boreholes and wells. Because the upper water intake prevents sand and silt from clogging it, it can also be lowered into polluted sources.

Baby -3

The suction connection in this modification is likewise found in the pump’s upper section. In comparison to other models, the model’s features and capabilities are more limited.

Simplicity is what defines the water pump’s device. Among its features is a hermetically sealed housing that completely prevents liquids from penetrating it. An electric drive comprising a vibrating device and a core with two coils is housed within the housing.

A unique valve closes the inlet holes and allows water to flow freely or discharge without pressure. It is found in devices with the upper intake at the top and the lower intake at the bottom of the body.

Pumps that are submersible and have an upper water spigot tend to last longer because they are less prone to clog with silt and clay.

We’ll go into the fundamentals for the "Submersible Pump Malysh" article. These pumps come in a variety of varieties to meet diverse needs, and they are made to function underwater. Knowing how a pump is made and how to operate it properly is essential whether you’re pumping water from a well, pool, or basement. We’ll go over the various varieties, ranging from those fit for industrial to home use. We’ll also go over crucial rules for effective and safe operation, guaranteeing durability and peak performance.

Technical characteristics

With a nominal voltage of 220 volts, an immersion depth of up to 3 meters, an hourly output of 430 liters, and a maximum water pressure of 40 meters, all of the aforementioned pumps operate on a standard electrical network. The water head of the "Baby-3" is 20 meters (maximum – 25 meters).

Basic models and "Malysh-M" have a power of 240 W, a body length of 25.5 cm, and a weight of 3.4 kg. The cables that come with the models range in length from 10 to 40 meters.

It is essential to pay close attention to the electrical protection class when purchasing a pump. Class I devices are identified by the letter "I" and come with a grounding three-core cable. The unit has a two-core cord and is considered to be in the second class if there is no marking.

Malysh or Rucheek?

A dilemma that many customers face is whether to purchase a "Rucheyok" or "Malysh" pump. There is no setup required for either pump; they are both simple to use. You have a good chance of doing the device repairs yourself.

The Republic of Belarus produces the first one. It only uses the upper approach for water intake. The Russian pump is made with various modifications, such as having the branch pipe—through which water is sucked—located at both the top and bottom, which increases the pump’s usefulness.

Technically speaking, there aren’t many differences between these two pumps. On the other hand, "Rucheyok" performs better and has a deeper level of immersion than "Malysh." It costs more than its Russian equivalent in this regard. In addition, the water quality of the Belarusian device might contain some impurities, whereas the Russian pump has higher water quality. These pumps serve essentially the same purpose, although "Rucheyok" is better suited for water intake into heating systems and "Malysh" is better suited for liquid intake and irrigation.

Rules of operation of the pump

The annotation that comes with the water pump contains a detailed list of its operating standards.

It should be kept in mind that the device cannot be used if there are any integrity breaches on the main cable or if the electrical network voltage exceeds 220 V. To prevent damage to the device, the voltage level must be continuously monitored while the water pump is operating. The unit can only be used continuously for a maximum of 12 hours per day. It is strictly prohibited to remove the unit’s water supply while it is operating.

Installing the pump

You will need a rubberized hose that is the right diameter in order to connect the submersible pump "Baby." It is attached to the appliance’s outlet using an elastic clamp. We can reinforce it with metal wire. In order to keep the water from freezing at low temperatures, a hole is cut in the hose if the device will be used in the winter. Covered for the summer with tape. Determine the nominal length of the cable so that it can freely reach the power supply before you buy the pump. The device is submerged in water with the assistance of a unique kapron cable.

The operating unit constantly vibrates. To exclude damage to the device, a ring of rubber material is put on it for additional protection, softening the contact with the well walls. In order to equalize the position of the pump and prevent it from hitting the walls, it is attached to a special crossbar with a cable made of some elastic material. The bar is placed at the very top and pulls the retaining cable. The electric cord, on the contrary, is placed loosely on the bar. After immersion, the device can be used immediately.
The distance between the bottom and the body of the pump depends on the type of location of the intake fixture. For devices with a bottom spigot, this section should be 1 meter. If the suction connection is at the top, the pump can be submerged much lower down. But the casing should not have contact with the bottom to avoid damage to the device.

The pump is positioned at the bottom and sealed with a rubber sheet if it is required to operate in shallow reservoirs or to remove water from different flooded rooms.

Installing a special filter is advised to prevent clogs in the device and enhance the quality of the water that is received.

Pump operation

The "Baby" submersible pump has a comparatively short operating life of roughly three years. Its maintenance procedures are not particularly complicated. It must be removed and visually inspected for any faults after being installed for the first time and operating continuously for two hours. The device is resubmerged for long-term operation if nothing is found.

The unit is then inspected at least once every two to three months after that. It can be inferred that the pump has struck the walls if damage to the casing is found. In that scenario, it will need to be lowered once more and then equalized.

The pump is humming but not working. What to do?

You might encounter a situation where the submersible pump "Baby" is humming but the water is not pumping. This type of fault is frequently brought on by vibration-induced loosening of fasteners inside the device or in the casing. which causes water to seep into it.

It can even come to the point where the casing completely unscrews and some of it falls to the bottom. It is essential to put the device in a specific container with pre-drilled holes in order to prevent this uncomfortable situation. This malfunction happens in models with a lower water supply because small pebbles and other debris clog the mechanisms, wearing out the rubber parts of the piston.

This option will either result in no water inflow at all or a weak head. It will be necessary to replace all of the damaged parts in this case.

It must be taken out of the borehole or well, cleaned, and completely dried out if the water pump won’t be used in the winter.

Keep the gadget out of direct sunlight and away from other heating sources.

The vibrating submersible pump has a long lifespan and won’t break if all of its operating guidelines are followed.

Malysh submersible pumps are a flexible solution for a range of household water pumping applications, especially where conventional pumps might not be appropriate. They are perfect for jobs like pumping water from wells, draining flooded basements, and even circulating water in ponds and fountains because of their small size and submersible operation.

Submersible pumps, such as the Malysh, are designed with a motor, impeller, and casing contained in a waterproof enclosure. This layout guarantees effective2 / 2

Video on the topic

Repair of the water pump. All dimensions and clearances for proper operation. Malysh, Rucheyok, Vihr. 8 layers.

Pump Rucheek-1. Pump Repair. REM. COMPLETE.

Vibrating pumps for water. Purpose, Design and Operation of WETRON TMs

Vibrating pumps RedVerg with bottom and top intake: complete set, operation and device of the pump

Rucheek with lower and upper water intake. What is the difference!?

Repair of the pump type "Malysh", "Rucheek", "Vodoley"