Street kitchen fireplace, barbecue, barbecue and stove in the country 20 photos

Imagine a comfortable hideaway tucked away in the peace and quiet of the outdoors, with the comforting glow of a crackling fireplace on chilly evenings and the aroma of a delicious barbecue filling the air. Welcome to your rural haven’s charming outdoor kitchen and fireplace. This article will take you on a captivating visual journey through the allure of these outdoor culinary and heating delights. It will include 20 gorgeous photos that highlight the rustic elegance and usefulness of these classic additions to your outdoor space.

Entering the world of outdoor heating and cooking is akin to accepting a timeless custom that unites people in the middle of the great outdoors. These outdoor features bring a touch of magic to any country retreat, whether it’s the pleasure of roasting marshmallows over an open flame, grilling juicy steaks on a barbecue, or just relaxing in the warmth of a well-built stove. Recollections are created and relationships are reinforced with every flicker of the flame and sizzle of the grill.

The barbecue is a quintessential component of outdoor dining experiences, signifying informal get-togethers and scrumptious meals. Every taste and preference can be satisfied with a barbecue, which ranges from sophisticated gas-powered setups to traditional charcoal grills. Cooking outside is a delightful way to combine flavor, aroma, and social interaction, whether you’re an experienced griller or a novice chef.

However, the outdoor experience includes more than just cooking; it also includes the coziness and warmth of a well-thought-out stove or fireplace. Imagine yourself curled up with a hot cocoa in front of a rustic fireplace, surrounded by a warm blanket. Or picture yourself and your loved ones getting together around a traditional stove to laugh and tell stories as the heat from the flames chases away the evening chill. These outdoor heating options act as gathering places for friends and relaxation in addition to providing useful warmth.

Prepare to be inspired by the creative design, exquisite craftsmanship, and timeless allure of outdoor living as we set out on this visual tour through the world of street kitchen fireplaces, barbecues, and stoves in rural areas. These 20 images are sure to spark your creativity and rekindle your love for outdoor comfort and hospitality, whether you’re looking for inspiration for creating your own backyard haven or you’re just enjoying some virtual escape.

Barbecue construction of complexes for cottage, home stoves, fireplaces

Year of service

Whatever occurs, we fix the issues that have come up throughout the year.

Prices below the market

Our work processes have been optimized, which helps you save. Every turnkey service, including material procurement and facility delivery.

Be safe

During construction, we take extra care to ensure fire safety, so you can rest easy.

We work without prepayments

We guarantee our work, so payment is based only on the completed work.


Free transportation to the location to decide on a project. Building a barbecue takes seven days.

Use more than 25 years

Our products have a service life of over 25 years. Long-term assurance of functionality.

We examine the allure and usefulness of outdoor cooking in this post, complete with 20 eye-catching images. We show you how these outdoor kitchen areas, which range from chic barbecues to rustic fireplaces, can warm and accentuate your country getaway. These outdoor cooking setups create a relaxed and communal atmosphere in your backyard, whether you’re grilling a feast for guests or curling up by a crackling fire on a cold evening. We hope to inspire you to design your own cozy outdoor culinary haven by showcasing the style and adaptability of these outdoor kitchens in each photo.

Varieties of stoves and barbecue photos

Through tangible executions:

  • Brick – durable, productively give heat and have good sound insulation.

Picture 1: A gray brick street stove with good heat transfer is situated at the fence.

  • Stone – In many ways they are similar to the brick, but not all rocks of the stone have sufficient thermal conductivity.
  • Metal – made of steel or cast iron. The latter better accumulate heat, as well as stronger. However, a steel furnace in case of deformation is easier to restore.

Picture 2: A decorative stone stove that serves as both a heater and a decorative element for the home.

By kind of fuel used:

  • Wood – The cheapest option, fuel is inexpensive and it can be harvested, however, this type of fireplace in maintenance is more troublesome.
  • Electric – do not require constant laying of fuel material, however, depend on the presence of voltage in the network, and are also inferior in aesthetically.
  • Biofuel -use special capsules-pellets or liquid as fuel material. This is the most economical option, but still loses a wood design in design.

Picture 3. The metal-mangal metal stove functions as a heat source and a tool for dishwashing.

Extra features:

Ventilating the air with the fireplace stove is beneficial in rooms that have an offensive smell. Such a device provides ventilation by using the room’s air for combustion.

Take note! You can install a double-circuit furnace instead of a traditional single-circuit furnace to cook food. For the garden

For garden

More frequently, brick or metal structures are employed. There are two kinds in the first:

  • Bourgod stoves – The simplest option. Made, as a rule, from sheet metal, fuel burns inside them. Suitable for warming up food. Disadvantage – fast cooling.
  • Prolonged functioning furnaces – divided into Two compartments: In the first, fuel is in the first (usually firewood), the formed gases burn out in the second. This can be called the "golden middle" in choosing a stove.

These appliances cost more than "bourgeois," but they are better for cooking because they hold heat for longer. Their building costs are also less than the stone equivalent.


When compared to other kinds of devices, metal units have the following benefits:

  • Fast installation, not requiring redevelopment of the room and additional flooring;
  • dismantling the structure in the warm season;
  • And the furnace and the room are quickly warming up;
  • The cost of the installation is lower, than the arrangement of a stone or brick structure;
  • used for cooking In the presence of a special surface.


  • Heating is required maintain fire;
  • The case heats up quickly, What can cause a burn or fire;
  • Hot metal oxidizes for a shorter period of time, which reduces the service life.


This design offers several benefits. The most important one is aesthetic appeal.

Regarding the remaining benefits, they are as follows:

  • Fast and high -quality heating (although the brick stove loses with a metal in speed);
  • Multifunctionality: fireplace, bed and cooking;
  • The efficiency of a brick sword reaches 80%;
  • The design is easier to clean – ash is a separate compartment;
  • Long service life.


  • For installation is needed Durable foundation or a fortified floor;
  • Inability to dismantle and remove in the warm season;
  • installation is more expensive than a metal analogue.

Construction of a street fireplace from brick

You must first draw a blueprint of the intended fireplace. A stove professional should do this. You should consider the project’s completion before ordering a furnace. It may contain the following components:

  • cutting surface;
  • woodcock;
  • oven;
  • ordinary hob;
  • memes;
  • smokehouse;
  • cauldron, and t. D.

Fleep diagram for cauldron with fried and burner


It is vital to include all of the furnace’s structural components, along with their precise measurements and compound nodes, when creating the drawing. The following elements make up the furnace’s design:

  • The base of the furnace. This is a platform on which solid fuel is laid. To remove ash above the surface of the base of the firebox, a lattice is set.
  • Smoke cornice. Vaulted element that is located above the firebox.
  • Kamin table. It is a protective base that prevents the oversight of the foundation from the furnace.
  • Fuel. Niche in which fuel burns. Can have any shape – rectangular, trapezoidal or, for example, arched.

Fireplace on the street

  • Smoke camera. Thermal energy accumulates in it in the form of smoke. Equipped with a valve for traction adjustment.
  • Convector. The cap installed above the fireplace, which is necessary for the transition of energy from chimney to the pipe.
  • Sparking. A pipe mesh designed to detain sparks and increase fire safety of the entire furnace.
  • Deflector. Prevents the occurrence of reverse traction with strong wind loads on the pipe.

On the chimney pipe deflector

  • Ash. The compartment in which the ash accumulates. It can be removed from there after or directly while working.
  • Chimney. Removes smoke to the desired distance from the furnace.
  • Forensition. It is located in front of the firebox. Is a platform protruding forward and on the sides of the portal. Performs a fire function.

Where the furnace is preferred

  • Mantel. Decorative element – shelf for small design elements. Installed above the smoke cornice.
  • The mouth of the fireplace. Another decorative element framing.

Experts use stove element tables to obtain high-quality, dependable, and safe stoves. Furthermore, when designing furnaces, certain guidelines must be followed.

In order for the device to function properly and the combustion products to be allocated to a safe distance from the working area, it is extremely crucial to compute the traction accurately. Naturally, a more cautious approach is needed when using a closed gazebo or house with a fireplace and barbecue in one chimney.

However, a working chimney system should also be installed for the street fireplace.

Diagram of a brick chimney

The best option is to buy a completed fireplace project, where the base and body laying scheme of the furnace have already been calculated, along with the entire furnace structure. A layer-by-layer building drawing found in completed projects makes it simple to construct an accurate furnace.

It is important to consider that all work surfaces should be at a convenient height and that there should be a free approach to the frill when selecting a project. The project should also ensure that every component is arranged correctly in relation to one another.

Selecting a furnace project that arranges the equipment required for maintaining the furnace and controlling the cooking process is a good idea. The furnace should have reasonable dimensions, among other things. Then maybe it will need to be expanded and supplemented.

The complex of corner stoves in sketch form It could be fascinating! Read about in the article found at the provided link.


Selecting a suitable location for the stove on the property is crucial. All objects, including the house, should be kept a safe distance away from the fireplace. A safe separation is three meters. However, removing the stove from the house is not worth it.

It is necessary to determine the wind direction before beginning construction because it is stable in residential buildings. If wind rise is not taken into consideration, you can construct a fireplace from which smoke will leak into the neighboring section or into the residential area of the house on the same site.

The street fireplace’s location on the property

Recall that there is additional risk associated with having trees and shrubs close to the stove. Consequently, when selecting a location for a fireplace, it is best to ensure that it is devoid of any structures, furnishings, or vegetation. After the furnace is constructed, carefully chosen garden furniture can be used to design the area next to it.

The procedure for completing construction work

We get right into building. We will make an effort to carefully consider every step of the process, from digging the pit to finishing the structure’s decorative decoration.

Bookmark of the foundation

It is impossible to complete the barbecue-kamin without first laying the foundation because of its intricate and weighty design. Skilled artisans advise selecting a monolithic strip foundation with a weak depth.

We start by marking the location and excavating a pit that is 25–40 cm deep, depending on the future structure’s depth. After that, we completely compact, fall asleep with gravel, gravel, and water with water with water. Put in the formwork, pour in the concrete mixture, and give it one to two days to solidify.

Brickwork of the furnace and chimney

The installation of brickwork is the next phase of construction. An expertly planned solution and premium masonry provide you with a long-term guarantee for your fireplace.

Important: make sure the level is horizontal in every row!

Following the foundation’s pouring, we start the brickwork.

Clay uses the solution most of the time. Add cement to the composition to guarantee the maximum strength of the masonry. A viscous and plastic consistency is indicative of a properly prepared composition.

It is best to use chamotis brick for furnace masonry, with seam thickness variations of no more than 3–4 mm. The furnace should ideally have six bricks for width and three for depth.

The lower portion is constructed using facing brick, sand-cement mortar, and a pedestal. It stands about 70 centimeters tall.

The use of clay solution and refractory bricks is also permitted by the mason’s masonry. Despite the fact that cement is added to lime dough, some experts advise using a different approach because of the dough’s strong moisture resistance. Lime dough can be made at home by carefully combining unsuccessful lime and water in a 1: 3 ratio, or it can be bought at building supply stores. Assemble the answer in the manner described below: Eight parts of sand, two parts of lime dough, and one part of cement.

The chimney is arranged based on the project’s projected needs. Lay out a smoke tooth to improve the thrust on the stove chimney’s back wall.

Rules for the construction of the arch

The owners strive to give the construction the most decorative elements possible because mangalam fireplace-equipped pavilions are a delightful way to decorate the house and the surrounding area. The construction of arched structures is one of the widely used techniques for this.

The arched structure is executed simply.

The first step is to remove the shields from the boards that are the proper size and shape, then cover the end with a strip of metal or tin. After the template is firmly in place and the wedges are placed underneath it, an arched overlap is created. The shield is disassembled when the job is finished. Correct execution will ensure that the arched structure is sturdy.

How to decorate a manine

The last phase of the project is known as the new structure’s decoration and design for your gazebo. For this application, natural stone such as dolomite or basalt works well as facing brick. It is also possible to use lane granite, but keep in mind that it is not recommended for facing surfaces where the temperature will rise above 80 °C.

Bars and coal trays, for example, are available in specialty stores as additional barbecue parts. A specific varnish can be applied to the barbecue surface two or three weeks after construction.

Tiny woodcutters will add comfort and style to the upper portion, which was initially decorated for comfortable seating or cutting tables. It is best to lay the paving slabs on the area surrounding the fireplace.

Leave this important work to the experts if you are unsure that you can handle building a mangala fireplace on your own.

Building a mangala fireplace is a challenging, responsible project that calls for specific preparation and knowledge. You can move on to turning dreams into reality if you are confident in your ability to complete this task. However, it is best to entrust professionals if you are plagued by uncertainties about your ability to manage every step of the planning and construction process on your own. Given that a fireplace mangal is constructed over many years, it should perfectly fulfill its functional purpose while also decorating your site for an extended period of time.

How to make a street stone -based fireplace stamping instructions with a video

Street Street is quite practical and very easy to use. A shamoet fireplace insert is mounted in the firebox of this design in order for it to be able to withstand any thermal loads. Moisture-resistant clinker slabs that have been meticulously cleaned surround the fireplace insert in the cornice, the projecting portion of the ceiling.

Sand and cement are required only for foundation casting. Dowels, bolts, and a moisture-resistant adhesive solution are used to connect the structural elements. In order to use the fireplace as a brazier, a grill-settop and a 1 mm thick leaf copper chimney are required. These can be ordered in the workshop or made on your own.

In order to make a street fireplace, 5 concrete slabs (75 x 50 x 5 cm), 2 concrete slabs (50 x 50 x 5 cm), 3 aerated concrete unit (65 x 40 x 10 cm), 1 chamotte fireplace insert for Topies, mineral -fiber plate, 1 mm thick, brass corner (20 x 20 x 2 mm), strip brass, 10 steel galvanized brackets (150 x 150 x 5 mm), facing bricks (including for the back wall), 10 liters of adhesive solution for aerated concrete blocks, 15 liters of adhesive solution for facing brick and clinker plates, 20 clinker plates (20 x 20 cm), copper rivets with a secret head, screws, screws, gypsum dowels, gypsum, basalt fiber, knitting wire and knit Square rod (8 × 8 mm).

Prior to building a street fireplace by hand, the site must be prepared by laying a strip foundation, the depth of which is determined by the local circumstances (soil type, humidity, site location, etc. P.). The foundation should then have two concrete paving slabs laid on it, which will serve as the fireplace’s base. A manual that you can make by hand will aid in providing step-by-step instructions that go along with the video and illustrate all technologically challenging situations:

A standard wood saw can be used to adjust the size of the aerated concrete blocks that should form the foundation of the structure. The surfaces must be applied in contact with one another using a spatula and a great thin layer glue before the blocks are placed on the base slabs. It is advised to use two concrete slabs for the basement ceiling, fastening them with screws and dowels to the vertically arranged gas concrete blocks.

A refractory plate made of basalt fiber must be placed on the floor slabs in order to act as a thermal insulation layer between the fireplace insert and the ceiling.

It is recommended to place the components of the chamotomed fireplace insert on top of thermal insulation and use knitting wire to temporarily connect them. Use fireproof brick in place of a chamotted insert.

Around a fireplace insert or chamotis masonry, there is a P-shaped element where three plates for paving paths must be joined with dowels and screws. Mineral-fiber slabs should be placed in the empty space between the focus and the fence. After that, you can start working. Apply a glue solution to the base and fences with a gear spatula, then press the front brick into it. A hammer can be used to gently tap the brick if needed.

Street Barbecue Op in Moscow

Folding a street stove, barbecue, or fireplace is a labor-intensive task that is best left to stove experts. Only they will be able to consider all the subtleties of the barbecue zone’s masonry, from location selection to material selection. The Delisa company’s skilled stovers only employ contemporary technology in their work, avoiding the mistakes made by others who mistakenly believe that installing a brick fireplace and street stove barbecue is a simple task. Just a few of these errors are listed below:

  • The size and quality of the foundation. Often it is ignored or made inappropriate – our stoves create a project using a special computer program, which guarantees the accuracy of calculations.
  • Ignoring the contour of the fuel. Simple stoves simply do not have such a technical equipment that allows our specialists to avoid such a mistake.
  • Too narrow chimney channels – it will be impossible to use such a stove, it will smoke, all the furnace work will have to start again. Our masters trust all calculations, so inaccuracies in the project are excluded.
  • Installation of low -quality accessories, which during the operation of the structure simply breaks. Our stovers work only with a hardware fit of foreign production, which is not afraid of high temperatures.

Every stove is a beloved creation of his, one that he meticulously crafts with the goal of producing the best possible outcome. Throughout their lives, they have been honing their stove skills with every new project. Expert stovers consider their work to be costly, but this shouldn’t come as a shock to anyone who intended to use a regular stove or a barbecue to adorn their plot.

What could reveal the furnace’s savings? First, design poses a risk to both owners and visitors; second, design is brittle. These experts don’t skimp on materials and carry out all furnace maintenance in compliance with fire safety regulations.

It is such people who work in the company "Delisa". The construction of street Barbecue stoves in Moscow and the Moscow Region is the main direction of our activities. Each of our projects is not only unique, but made with soul and love for our work. On our site you will find many successfully implemented projects – this is better evidence of our professionalism. In our work, we use advanced technologies and use high -quality modern materials, which have proven themselves during operation in high temperatures. All this, as well as extensive experience, helps us to execute even complex orders. Professional erection of a barbecue street stove or independent masonry? We think the choice is obvious!

Fireplace with a mangala function, barbecue and stoves

The public favors this choice far more than the others. If the furnace complex is built for it, the pilaf can also be prepared on the stove while the fire burns and the coals are smoldering. On the surface, everything seems positive. On the other hand, there is one significant drawback.

The cost of a cooking fireplace similar to this one will be very high. Sometimes even more costly than the gazebo itself.

This is where the process of thinking starts: "Does it require a similar complex to me generally? Is there enough barbecue to fry the barbecue? Perhaps put on the vehicle…" People with tight budgets are considering this format. A comparable structure, where people will occasionally unwind on weekends, will come at a comparatively high cost.

Which option is better to choose

As was already mentioned, the fireplace with stove and barbeque is fairly pricey, and its construction isn’t always suitable. And yet, when a specific objective is being pursued, such a construction may be highly appropriate.

I was persuaded of this by Nikolai Tarasov’s example, who constructed a closed gazebo that combined a fireplace, barbecue, and furnace and was happy with the result (see the article for more information, "A Closed Gazebo with Barbecue: Calculating the Material, Photo, and Video").

Building such a complex makes sense when there’s a specific need for it.

The primary objective is to prepare meals with your spouse, as they genuinely enjoy this activity. Thus, this is your opportunity if you enjoy cooking as well and are prepared to invest in the building of a sizable complex for this purpose.

There won’t be anything left from the fireplace; there should only be a small amount of open fire in the furnace complex.

A whole other question when you want to set up a gazebo with an open fire and require a decorative element. Or you enjoy having conversations in your head while the firewood crackles. Generally speaking, your need is involved here as well. It is perfectly acceptable to construct a decorative fireplace if you truly need this component.

Decorative fireplace is small, beautiful, cozy

This option is not often used in arbors. In this instance, the fire focal point is a typical décor element that requires:

  • Build an additional foundation.
  • Make masonry.
  • Conduct a chimney.

You still need to periodically remove ash and clean from soot. However, we also get a strong interior feature, flooding, which is made possible by a beautiful ambience that includes the sound of crackling firewood and surrounding quiet. Is that okay?

The main defense used by those who chose to cook with mangala instead of the traditional decor was, "You won’t even fry the meat." For the sole purpose of enjoying fire in a room, most people are therefore not prepared to make such a significant investment in an open source of fire.

Here the coals crack and the fire burns, there’s enough barbecue on the street to fry meat.

Location and types

The couple reached the last and most enjoyable stage after you completed the foundation, allowed it to naturally shrink, allowed it to dry, folded the furnace with the portal, and connected the installed chimney system.

The fireplace portal and firebox cladding, which includes street, enables you to divide and diversify your heating unit profitably. Any style or direction can be used for the furnace and portal cladding.

While bold modern or high-tech styles are likely to appeal to youth, traditional classic styles are always in style. A country-style barbecue complements a country or country house’s interior design. Sophistication and expensive décor are valued by many. In this instance, Provence, Fuzhn, and Art Deco are sure to appeal to you. You can complement it with a Scandinavian-style brick stove if the garden is fairly large and light. The minimalism design is appropriate for those who appreciate simplicity and little decoration.

It is best to install a barbecue outside because the structure will start to lose its strength and appeal due to the year-round impact of precipitation and other natural phenomena on brick. Is it possible to build a large roof or a tiny canopy?

There won’t be any unique challenges when building a summer kitchen, gazebo, or tiny addition. This location will increase the longevity of your heating system and more than pay for itself.

Prior to constructing and organizing the project, it is also essential to determine the kind of structure to be used in addition to the precise location and its measurements. The building may be situated apart from the home, arbors, and other garden features. We call this kind of barbecue "island." Structures positioned close to walls or partitions represent another type. Known as parishes, they are typically smaller than islands. Corners are the third type of street complex. These installations are incredibly small, multipurpose, and effective; they can be placed in gazebos or even on the smallest veranda.

How to build a fireplace fireplace


In the event that you choose to install a stationary street fireplace, you should begin by creating a detailed drawing and layout for the furnace. It’s time to fill the foundation where the fireplace will be installed now that you’ve chosen the location. It can take on multiple forms, such as the furnace’s spherical variant. The fireplace’s design is determined by the features it will offer. Whatever the style of street fireplace, the chimney must be puffed up and the crucible must be present.

A hole with an arched shape, the crucible is used to cook pizza and many other foods. The crucible can serve as a substitute for an electric oven in certain situations, but the prepared food’s flavor cannot be compared to that of an oven.

For proper traction from the furnace to the chimney, it was required. Furthermore, the blown offers simple access for furnace cleaning. All of the burned-out firewood residue collects in it.

The most crucial component of a street fireplace is the chimney. How hot the fireplace gets on a scale of heat

In order for the chimney to be easily cleaned by hand, its diameter shouldn’t be too small. Installing a specific valve is required to control the temperature and flame intensity in the chimney wall. This valve will regulate these processes. Smoke cannot easily flow through the pipe if the valve is fully closed.


As previously stated, the foundation must be built before proceeding with the construction of a street fireplace, just like any other stationary structure. Depending on the thickness of the foundation and the quality of the cement, the foundation may need to stand for a few days or weeks before becoming completely stronger.

The construction of the fireplace’s actual design can begin once the foundation’s base has fully frozen. Bricks are laid in a checkerboard pattern on top of each other in the fireplace. This is the easiest and most dependable method. The hardest and longest process is laying the main portion of the street fireplace. It is identical to the masonry of any other furnace in theory.

The cement platform’s shape will be repeated in the even first and second rows. The blowing gasket starts in the following steps. Depending on the depth of the blown opening and the height of the fireplace, this process can be repeated in multiple rows.

You will need any flexible, heat-resistant metal that can be bent to the desired corner of the arc in order to indicate the crucible’s characteristic arc.

The order’s final phase is the chimney’s construction. Although it is the narrowest part of the street furnace, making it can be a labor-intensive process.

Barbecue construction of turnkey complexes

The company’s primary focus is building barbecues, but we also design and install stoves, fireplaces, and arbors. Every project we work on is different, whether it’s frontal or corner, modern or decor elements, smoke or barbecue, Russian stove or tandoor—the range of options we offer will satisfy even the pickiest client. The customer’s preferences are taken into consideration when designing and building fireplaces or barbecues. Collaboratively executing the project enables the best possible aesthetic pairing for the future kitchen, complete with a variety of cabinets, countertops, and sinks.

From design to construction, the primary goal is always to guarantee a high degree of comfort. The barbeque complex made with premium materials and contemporary technologies has the following benefits:

  • does not smoke;
  • Prices below the market;
  • impeccable quality;
  • presentable look;
  • service life of more than 50 years.

However, functionality is this complex’s primary benefit.

We construct barbecues in accordance with all applicable fire codes and regulations, giving careful consideration to safety throughout the process. You can order any stove or fireplace turnkey or in black.

Managers can provide comprehensive details about building a complex barbecue or a fireplace in the gazebo by contacting them via phone at +7 (495) 175-48-33 or email at Info@barbeku.Pro.

Barbecue fireplaces of brick

Assemble your tools and supplies before you begin.

Because of their many features, barbecue fireplaces are a design that is widely applicable to daily life.


  • Red brick;
  • Brick chamotum;
  • Shutters;
  • Topa doors;
  • Grates;
  • Barbecue gratings;
  • Clay;
  • Cement;
  • Sand;
  • Reinforcement;
  • Metal sheet;
  • Boards;
  • Tar;
  • Plumb line and level;
  • Hammer;
  • Saw;
  • Bulgarian.

What food must be prepared before constructing a barbecue stove? Additionally, get a construction solution ready before you lay. It can be a finished mixture (which has a different composition for different temperature conditions) or a homemade mixture of clay and river sand.

The next step involves figuring out how many bricks are needed to build a fireplace. The correct amount of bricks must be purchased before construction can begin. The completed detailed drawing of the intended fireplace design is used as the basis for calculations.

If you want to install a brick table for a barbecue and a brick chimney for a stove, this will take about 300 bricks.

You now have to arrange a construction schedule. For instance, if the fireplace has thirty rows, you would need to draw each row independently and indicate the brickwork on each scheme. This will help determine the appropriate number of bricks and facilitate understanding during the work. You must choose the installation location for the barbecue after the necessary preparations are finished.

It is chosen based on the following standards:

  • The fireplace should be located at a remote distance from summer cottages;
  • You can not install a fireplace near wooden buildings and trees;
  • The fireplace barbek must be installed so that there are no problems with the eyeliner of water and electric networks;
  • There should be a free space for installing the gazebo.

Go ahead and lay the foundation now. Markings should come first. The gazebo must be taken into consideration when determining the foundation’s dimensions. We excavate a pit that is approximately 50 centimeters deep, fill it with a gravel and sand mixture that is level with the ground, tamp it, and build a wooden formwork. In order to avoid leaving any voids, we mount the reinforcement, pour the concrete, and then tamp once more. Cover the foundation with burlap at the end to prevent it from cracking. Once the formwork has dried completely, take it apart.

The installation of walls for a contemporary fireplace is the following step. We use a butron to smear the walls. After that, we installed two layers of roofing material and got ready to lay brick. We arrange the columns in the first and second rows of bricks. We install a metal plate about where the seventh and tenth rows meet.

Put a piece of metal in a groove. We build a pre-trumpet out of wood and begin to construct a vault with the fifteenth row of bricks.

We choose the appropriate size and cut a sheet of plywood. Celebrate the curve and use a jigsaw to create an arc out of two boards. Subsequently, we hammer the plywood sheets along the board’s curve and place the third sheet in between the two boards to secure them. After installing the final structure in between the walls, bricks are placed on top of the solution.

Brick that is resistant to fire should be used when building a firebox. Starting from the eighteenth row of bricks, a chimney needs to be laid out. The next row will gradually get narrower; up to the twenty-eighth row, each row should be less than the half before it. If the material needs to be preserved, a metal pipe could be used; however, smoke would rise in this scenario.


It is advised to use the developed schemes for the construction of barbecues in the absence of experience. They don’t have any secrets; all you need to know is that proper brick strapping is required to create a sturdy firebox that can accommodate the installation of a lattice and roasting. Two to three layers must pause for a brief period of time following masonry; otherwise, the lower layer of a softened solution will experience the full severity of the fireplace.

The process of laying a street

You can therefore begin building the barbecue’s masonry after the foundation has fully solidified.

  • The design is performed in half a brick, as it is not subject to heavy loads. Already built in brick. The strength will create the masonry method "Route". It implies a shift of all bricks for half a bumpy cyclical.
  • When forming one row, before going to the next, do not forget to insert elements of fasteners for shelves and grilles. For this, metal products or bricks are used, laid perpendicular to a row and forming ledges inside the furnace. If this nuance is overlooked, you will have to dismantle the entire barbecue.
  • Frying is mounted on performed fasteners. It should be provided with holes through which the air necessary for combustion will arrive.

Grill used for preparing steaks

The firebox’s considered version is the most basic, though closed structures have the potential to make it more complex. However, it is not advisable to start the first independent work with complex options because the complexity affects nearly every parameter, including the number of rows, jumper, and row formation.



One of the most well-liked summertime activities and forms of entertainment is the backyard barbecue. Nobody is likely to say no to making a barbecue, chatting, and having a good time. You need the right street fireplace for the perfect and delicious fish, veggies, and barbecue. Generally speaking, barbecue-equipped fireplaces are symbolic, so you can place them anywhere in your yard. If you would rather not spend time at your location, you can bring a portable barbecue outside and enjoy food by a river or in a forest.

The Weber portable fireplace is one of the popular fireplaces. Many admirers of rest in nature have come to trust this manufacturer because it has established itself as modern and conscientious. You can use Weber fireplaces and barbecues as soon as you purchase them from the store because they are fully operational.

There are multiple models available for selection. There are metal fireplaces available, many of which are forged models, for those who enjoy tradition and dependability. A ceramic barbecue is suggested for individuals who value aesthetics over functionality, as it is relatively heat-resistant. Naturally, one must handle this type of barbecue with caution as ceramics can shatter when struck forcefully.


Unlike mobile fireplaces, stationary fireplaces can only be placed in one particular area of your garden. This is the reason selecting a location for a furnace installation needs to be done carefully. The thoughtfully designed street fireplace will let you take pleasure in both its flawless appearance and the delectable meals that are made with its assistance. A stationary fireplace can serve a variety of purposes, such as a grill, a barbecue, and a regular plate. As a result, you can make second dishes and side dishes in one location rather than having to rush outside.

Although brick makes up the majority of stationary fireplaces, you can install a ceramic or metal model if you so choose. Every kind of stationary fireplace is highly functional and has a nice aesthetic appearance. Of course, the most functional fireplace is a brick one that looks good and creates a cozy, homey atmosphere. Furthermore, a lot of gourmets say that food cooked in a brick furnace is the tastiest and most elegant.

After investing the time and money to install a stationary multipurpose fireplace, you’ll be able to enjoy enjoyable vacations with loved ones for many years to come, and your home will truly become a haven for restful nights and delectable meals.

For smoking

It is hard to find a Russian who wouldn’t eat fat, smoked fish, or chicken. These kinds of treats are not inexpensive at all when purchased in stores, but you can easily prepare your favorite recipes at home. For this, there are fireplaces that have a smokehouse feature. If smoked meats are your thing, then put in a stationary fireplace-captile on your property. You will therefore be able to cook mouthwatering treats whenever it is convenient for you. Stationary smokehouse: heavy, but quite useful.

A portable, small smokehouse is a good option if you don’t intend to smoke products all the time. It takes up very little room and is portable, so you can take it outdoors with you. This kind of smokehouse handles its job just as well as a stationary comrade, despite its small size. The inability to cook products in big quantities at once is the only drawback. However, a small family will find such a smokehouse to be very suitable.

The hot and cold smoking devices also vary depending on the type of smokehouse. The final products will have a different flavor, and cold cooking requires much longer preparation—many hours or even days. But time is no barrier to true gourmets.

Street stove in the country

Without a street stove, what would be a street kitchen? Any summer cottage will look great with the street stove. A lot of site owners would rather build their own stoves.

What you’ll need to build a street stove in a summer cottage is:

• doors for the furnace compartment; doors for blowing; shovel; KELMA; clay solution; cement solution; construction level; windows for both fireproof and facing brick.

The foundation for the street stove should be strong enough to withstand the weight of the future building. To do this, a pit is dug up about a meter deep, covered with rubble or broken brick and poured with a cement solution.
After the foundation dries, it must be covered with rubberite – this will ensure the waterproofing of the construction. Now you can start laying the furnace itself. After laying the first row of brick, the door should be installed. Through a few rows of bricks, a door is installed for the furnace compartment. A stone slab is installed on top of the structure, on which, if necessary, you can heat the food.

Finish building the furnace to fit the chimney. The modular chimney is the best choice. Sealant is used to isolate each joint in the structure. If every step is done correctly, the project will result in a long-lasting design.

Improvised street stove

Did I enjoy the article? Post to social media!


The primary factors in identifying the kind of fireplace are its functionality and mobility, or alternatively, its stationary nature. When selecting the ideal solution for you, consider how the fireplace will be utilized as well as the amount of space it can take up on the property.

There are fireplaces that serve only as decorative accents or that combine aesthetic and functional elements. External foci can be made in the shape of a cube, a bowl on forged legs, a circle lined with stone, or any other shape that is conceivable. They are made to serve only the purposes of the soul’s harmony and design.

These models don’t suggest cooking; the most you can do near a fire of that kind is grill sausages or marshmallows.

These products can be moved, so a decorative fireplace can be taken down in the event of an evacuation or for the winter. Stoves—brush stoves—serve broader functions. One of these models might have a barbecue on it so you can cook some small meat. Barbecue is an option from abroad.

The following categories of street fireplaces can be distinguished based on device technology:

  • Equipped open fire, decorative. A kind of bonfire, which can be formed with a stone, brick or any other heat -resistant material (even with a special glass).
  • Barbeku furnace. The design is equipped with a chimney and allows you to fry the meat over the open fire and on the coals. In addition, you can cook any dishes in a special fire -resistant dish. Can be constant or portable.
  • Smokehouse. It is not too difficult to build such an object with your own hands. The main thing is to adhere to technology. There are ready -made factory portable street smokehouses that are very popular.

  • Mall. This is the simplest structure for the preparation of meat and other dishes on an open fire or coals. Can be stationary and portable. Constant barbecue can be built from bricks, portable models are usually metal.
  • Street bread or Pompeye furnace. Suitable for those who like to bake pies, home -made bread, cook pizza on the street or lavashi. In such a structure, heat is given not coals and not open fire, but very heated internal walls that are made of heat -powered and warm -intensive materials. The vault of the furnace is vaulted, has only one narrow chimney. This design collects as much heat as possible and does not let it out.

Building a cottage or suburban estate gives you a lot of flexibility when it comes to designing an object that incorporates multiple street focal points simultaneously. The smoker barbecue stove is the most often used option. With this combination, you can prepare multiple dishes at once.

The kind of material used to make each type of street fireplace can be divided into two categories:

  • Brick stoves. The most popular material for independently manufacturing street fireplaces is brick. It heats up quickly enough, and then holds heat for a long time, which allows you to cook for a long time and warm up next to the stove with a cool day. In addition, it is easy to work with the material, it is relatively inexpensive and affordable.

Brick comes in a variety of forms. Their methods of producing final goods vary, and as a result, so do their attributes.

It is crucial that the fireplace can readily transfer a temperature of 1000 degrees Celsius and does not crack under extreme heating.

Furnaces are laid directly on chamomed bricks.

In addition to the traditional version of the product, manufacturers also provide the wedge-shaped version, which is utilized for creating arched holes.

But because it expands so much when heated, this kind of material isn’t good for facing the fireplace. It is better to buy a front, full-bodied brick for decorative purposes. With the product’s uniformly flat surface and different forms for arranging arches and portals, you can create a stunning and long-lasting piece of art.

  • Stone fireplaces. The stone in the manufacture of street furnaces is used only for cladding. It is best to choose natural, not artificial material. So you can avoid the release of toxic elements with strong heating.

In a structure like this, the furnace portion, or base, is decorated with chamotis brick. Basalt or dolomite can be used as decorative elements in areas where temperatures will rise above 80 degrees. Avoid selecting materials like botum granite that are difficult to handle heat.

The stone finish complements metal, forging, and face brick extremely well; it can accommodate any style on the site and exudes an opulent, noble appearance.

Classification of Barbecue furnaces

The garden barbecue is unique in a lot of ways. At the same time, it is advised that you become thoroughly acquainted with the characteristics, distinctions, and classification of such a unit before constructing one in your rural area. This is required because these stoves can vary in both their functional and visual designs.

Probably one of the largest and bulkiest buildings on this list is the barbecue complex with barbecue. These brick stoves only collect after a foundation has been carefully and appropriately prepared because of their heavy weight.

It is crucial that everything is put together in accordance with the instructions; if not, the structure will eventually start to settle heavily, which will cause malfunctions and deformation of the firebox and portal.

The fireplace-mangal is among the most dependable, resilient, and long-lasting constructions. For their assembly, only sturdy, premium materials are utilized. Stove brick is the most widely used and essential material in this situation because it can withstand high temperatures, their abrupt changes, high humidity, and high loads.

When barbecue brick is chosen properly, it will not deteriorate and will last for over a dozen years. Such a unit’s primary purpose is to cook, especially meat and vegetables, which come out exceptionally juicy and fragrant.

The majority of the time, the barbecue is situated beneath a canopy or tiny visor. Installation can also be done on the veranda or in a garden gazebo. Using it as a summer kitchen is permitted. In this instance, the canopy enables you to shield the device from the effects of other environmental elements and precipitation.

Apart from all the benefits you have already learned about, there is one major disadvantage to barbecue-mangaly. It is necessary to set up a chimney. Therefore, regardless of how wide open the door is, all combustion products and smoke will be directed toward the street rather than entering the space.

The features of the brick structure and your project will determine how a barbecue is constructed. The barbecue complex is one of the more well-liked types and is characterized by its size. A fireplace and a barbecue are two of its primary features. In this instance, a Russian stove is also essential. The entire structure is erected in one location, next to one another, and is monolithic. A smokehouse is another feature of the installation that allows for the preparation of any food, starting with vegetables and ending with meat and seafood.

Consider the barbecue fireplace when selecting a reasonably small and appropriate option for a small veranda or garden gazebo. This type of barbecue grill is highly functional and compact.

It has several grills and skewers attached to it. In this instance, you can furnish the recreation area with a table, benches, or chairs in addition to the unit itself. Even in a tiny gazebo, there is sufficient room for everything because of how small the device is.

In addition to their practicality and compact size, grills when paired with stoves and fireplaces enable you to cook aromatic and juicy food outside. In the process, the grill doesn’t create an unpleasant odor or release any hazardous decay products into the atmosphere. Conversely, you will take pleasure in the cozy smell of coal and cooking food.

Additionally have additional features that are reliant on design elements, manufacturing materials, and other variables.

The ability to use a stove both fully and partially is one of its benefits. In the second scenario, the apparatus can serve as a barbecue where the meat is cooked and the skewer is inserted.

What are the brick barbecue

At this time, our business is able to update practically any barbecue design that complements any landscape and is simple to use. Expert stovers can construct a brick barbecue with varying degrees of difficulty in any style.

You could use it as a barbecue stove to warm the veranda and prepare meals. The majority of Russians like having an outdoor garden furnace. In this instance, collaborative projects like barbeque-equipped gazebos will appeal to them.

You can cook any kind of food, from fish and meat on a traditional barbecue to a variety of eastern dishes like pilaf and vegetable snacks. The following can be identified as the primary benefits of the brick oven barbecue:

  • Excellent aesthetic characteristics – a similar design will become a stylish decorative element decorating the site
  • Cooking healthy dishes – create delicious dishes without a gram of fat
  • Fire safety – the design of the barbecue is carefully thought out, and therefore you can use it without fear of fire
  • Durability – we use only high -quality materials designed for a long service life.

The acquisition of barbecue will remain relevant even after years pass. It is, after all, quite enjoyable to fry the barbecue and savor its incredible flavor and aroma. Moreover, you can engage in this activity year-round with our stoves.

We find it convenient because we handle every client individually and with a comprehensive approach. You can order just a barbecue stove or outfit a fully functional recreation area; we’ll take care of building a roomy gazebo where you can enjoy your meal.

The primary phases of building a barbecue:

  1. Choosing a place
  2. Development of a project and design design
  3. Selection of materials for construction
  4. Black masonry
  5. Final cladding.

Real masterpieces are created by skilled master packers and masters; we develop the Barbecue project while considering all of our customers’ needs and desires. We successfully complete tasks of any complexity by producing unique and unconventional constructions. If needed, you can add more components to the standard stove, beginning with the shed and concluding with more shelves and open space.

Four reasons to trust "Focus" specialists with barbecue construction.

By putting your trust in the experts, you can be assured of the barbecue furnace’s quality and safety because our work satisfies all current standards. You also receive a host of extra benefits and advantages when you work with us. Specifically:

  1. Ready -made projects and individual design development – we will select what will suit you at 100%
  2. Qualified specialists – our masters are well versed in the intricacies of the construction of furnaces and arbors for barbecue
  3. Free consultation – we will answer in detail all questions and help you make a choice
  4. Efficiency – we work quickly and productively, we never break the deadlines and do not delay customers.

Most significantly, our pricing strategy is advantageous and dependable; the overall cost of construction is contingent upon the project’s complexity, size, and choice. We will choose the best choice for you based on the allotted budget, which will only include fair prices and ideal circumstances.

Contact us right now at the numbers listed above to learn more and place an order for the construction of a Moscow barbecue. Alternately, complete the online back call form, and we’ll give you a call back when it’s convenient to discuss the conditions in more detail.

Reviews about our work:

The page has even more reviews.

Fireplaces and street stoves of similarities and differences

Outwardly the fireplace for the street resembles a standard home. As a rule, they install it in a gazebo, under a canopy or on a veranda. He can have a common chimney with the house. If we are talking about a separate fireplace, then the chimney pipe will have his own. Barbecue stove for a gazebo is often confused with a brick fireplace. With similarity, they have one significant difference: the latter is not intended for cooking, fireplace fire only heats the air and creates an atmosphere of comfort. To a greater extent, these structures serve to decorate a summer cottage or barbecue area. Around the structure you can arrange a chair and in the evenings admire the game of flame.

Tasty fire dishes can be made with a barbic barbecue. These brick stoves offer additional options: they can be used to grill fish, meat, and vegetables on skewers or gratings. This design always includes a brazier, along with a number of additional features like a grill, skewer, grates, a cuttingman, and a box for coals. There are more material requirements for the street barbecue, which has a stove for roasting bricks and making cauldrons. To resist the damaging effects of the environment, they must be extremely strong and of the highest caliber.

This design can be considered truly functional if we take into account the complex’s street and fireplace. It lets you enjoy a range of flame-prepared dishes and get the most comfortable rest possible. Although the structures’ shapes can vary, they are typically built along walls at an angle or straight up against them. The size of the barbecue area and the preferences of the customer determine which option is selected.

The operation of the chimney

The chimney poses a risk in addition to the furnace itself when it is in use.

As a result, following the guidelines is necessary in order to use the structure:

  • Clean the chimney in a timely manner – At the same time, it should be checked every month, and once every two years – call a specialist.
  • Use dry firewood not very large. Birch burning is not recommended. Due to the high content of tar, it smokes greatly.
  • The new fireplace is excreted in trial mode. The best craving is achieved in hot times, as well as in the early or late hours.
  • Fuck the chimney, This will help to recognize cracks.
  • The chimney should not have more than two bends in the design.
  • The internal diameter of the chimney should be 10-15% of the portal area. Too much diameter contributes to condensate formation.

Rating on average: 0 out of 5. appreciated by her: 0 readers.


It’s important to take into account both domestic and international manufacturers when selecting a portable fireplace variant. Well-known companies in Russia that produce stationary and portable barbecues, stoves, bonfires, foci, and garden fireplaces are:

"Blacksmithing Manufactory"

Most products are made of black metal. The forging components serve as the décor. As a result, the base of the barbecue can be adorned with silhouettes of wild animals or trees, the fireplace’s back wall can be artistically rendered to resemble leaves, racing horses, or salamanders, and bonfires can be shaped like trapezoids or circles with geometric decorations or wildlife themes, among other ideas. Everything that is intended for winter can be taken apart.

The business manufactures products that are portable.


Moscow is the city’s manufacturer. Brick is used to create the unusually shaped and executed fireplaces; smooth, white plaster is used as the facing material. Barbecue grills, Russian stoves, cauldrons with forged stands, washing machines, and their combinations as a single product are examples of various product fullnesses. Products from Barbecku LLC are more costly, but they also have a dependable and long-lasting appearance and material, particularly since the design is stationary.

International producers sell a variety of portable fireplaces and grills. Exactly this kind of flame-focused segment is developed abroad. Principal companies:


Since 1952, the American company Weber has been producing barbecue goods and has established a global reputation. Products can be identified by their spherical form. The grill case may be transparent or deaf due to glass. Coal, gas, and electric models are available. A coal grill yields the best barbecue.

Given the exceptional quality of the products, the manufacturer offers a ten-year guarantee on them.

Radius Design

Special round bowls are prepared by the German company Radius Design as a grill using a device that resembles a round lattice and is placed directly above the flame. But in this instance, aesthetic qualities are probably more important in selecting a product than the capacity to cook over an open flame.

Operation Rules

You should test the chimney damper for reverse traction by pushing it before fingering the device. The ash is cleaned if it contains a lot of non-combatant coals or ash.

There are crumpled pieces of firewood, chips, and lucchins arranged atop the grates.

Cross places larger firewood after it has settled. New firewood is burned until it is burned completely or almost completely.

Citation! The furnace is filled with a large amount of small wood when a high combustion intensity is needed. They take a few large firewoods in case slow burning is required.

Malline in a summer cottage

An essential component of any street kitchen is a small metal barbecue. One of the great things about this kind of barbecue is that it’s very easy to move to another location if needed.

To create a comparable barbeque using your own hands, you will need:

Iron sheets, roulette, DRAM, metal disks in Bulgarian, BUTS, and WELL are a few examples.

The grill can be constructed using metal sheets that have a minimum width of 1.5 mm. The barbecue will last longer if the metal sheet is thicker. Prior to anything else, the size of the future BBQ must be determined. With dimensions of 30x50cm, there is more than enough barbecue for a family of four. The quantity is determined by the number of skewers if there are a lot of friends and family attending. Approximately 10 cm should separate each skewer.

The first step is to mark the structure’s sides on a sheet of metal and use a grinder to cut each component. A welding machine is used to connect the parts’ extreme edges. The barbecue’s bottom is finally welded to the frame. It is preferable to fasten the legs with bolts so that the barbecue can be conveniently carried in a car trunk.

You must drill holes, backing up from the bottom by about three to five centimeters, in order to guarantee traction in the barbecue while it is in use. It is important to keep in mind that more work should be done the smaller the hole diameter. All that’s left to do is create skewer slots in the upper portion of the structure’s walls.

Hand-grown metal

We make a concrete fireplace

The required materials are 10 cm thick concrete blocks, 21.5 cm thick concrete blocks, and 41 × 90 cm concrete plates.

Concrete’s use in the construction of street fireplaces allowed for practically limitless design experimentation.

The foundation is where a concrete fireplace is also built:

  1. First, the dimensions of the fireplace are outlined. The foundation contour is noted 22 cm larger than the contour of the fireplace itself. The depth of the foundation should be more than 50 cm. Then they dig a hole, compact it, smooth and after that the construction of the foundation begins.
  2. The foundation for a concrete fireplace can be made of red brick. It is brought to the ground level and create waterproofing to protect the brick laying of the fireplace from damp.
  3. A concrete foundation is created from a concrete mixture, which consisting of one part of gray Portland cement and four parts of a mixture of sand with gravel. A reinforcing mesh is used as a reinforcement of about 10-15 cm in size. Concrete is poured into a finished pit in two approaches. After the first stage of the fill, the reinforcement is laid, covering it with a concrete mixture and rammed, then the rest of the foundation is poured. The top must be leveled and compact. In a couple of days, when the concrete completely freezes, you can start installing the fireplace.
  4. With the help of metal profiles, the supporting walls of the fireplace are laid out.
  5. The next stage of construction is the creation of a fireplace chamber.
  6. Then you need to knead the laying solution consisting of one part of the cement, one part of the lime and six parts of the sand. Blocks are laid on the cement solution, then put the floor slab on which the smokers is installed.
Street kitchen fireplace 20 photos
Barbecue 20 photos
Barbecue and stove in the country 20 photos

Adding an outdoor kitchen area to your backyard or rural getaway will make your free time into treasured memories. Enjoying nature and delicious food can be enhanced by having a well-equipped outdoor space, whether you’re hosting family cookouts or intimate get-togethers with friends.

A well-designed stove, barbeque, or fireplace is one of the most important components of an outdoor kitchen. These features serve as useful tools for preparing delectable meals in addition to adding visual appeal to your outdoor area. There are options to suit every taste and cooking style, whether you prefer the convenience of a modern gas grill or the classic charm of a wood-burning fireplace.

The arrangement and positioning of your stove, barbeque, and fireplace should all be carefully considered when designing your outdoor kitchen. They can be used safely and as efficiently as possible if placed in the right places. Furthermore, adding features like surfaces for food preparation and seating can improve your outdoor kitchen’s overall usability and appeal.

Keeping your outdoor kitchen comfortable requires careful consideration of both heating and insulation, particularly in the winter or on chilly evenings. By spending money on high-quality heating systems and insulation, you can control the temperature and increase the amount of time you can spend in your outdoor area.

In the end, the images in this post offer motivation and suggestions for designing your own outdoor kitchen haven. A well-designed outdoor cooking area can enhance your outdoor living experience and help you make enduring memories with your loved ones, whether you’re an experienced cook or just enjoy the occasional barbecue.

What type of heating you would like to have in your home?
Share to friends
Michael Kuznetsov

I love to create beauty and comfort with my own hands. In my articles I share tips on warming the house and repairing with my own hands.

Rate author
Add a comment