Solar stove: a modern and safe way to cook food

Imagine preparing your favorite dishes with just the sun’s energy. It does sound futuristic. Now, with the introduction of solar stoves, many homes all over the world are able to implement this futuristic concept. With the help of solar stoves, you can cook food in a modern and safe manner while cutting down on energy expenses and carbon emissions. Delicious meals can be prepared using the sun’s abundant energy.

Conventional cooking techniques frequently use fossil fuels, such as gas or electricity, which exacerbates climate change and pollution of the environment. Solar stoves, on the other hand, are an environmentally friendly substitute for cooking because they run on renewable energy from the sun. These stoves reduce the amount of non-renewable resources required by using solar power, which lessens the environmental effect of cooking.

The safety of solar stoves is one of their outstanding qualities. Solar stoves function without the use of flames or combustible fuels, in contrast to conventional stoves which present risks such as gas leaks or fire hazards. This makes them the perfect option for homes with children or in areas where fire safety is a concern because it removes the possibility of unintentional fires and lowers the risk of burns or injuries.

The adaptability of solar stoves is another benefit. Solar stoves can easily handle a wide range of cooking tasks, including simmering soups, steaming vegetables, and boiling water. To help you achieve the best results for your culinary creations, some models even have adjustable settings to control cooking temperatures.

Moreover, solar stoves provide substantial long-term energy cost savings. Even though solar stoves may require a larger initial investment than traditional stoves, they eventually pay for themselves because they don’t require ongoing fuel costs. Because of this, they are an affordable choice for eco-aware customers who want to lower their carbon footprint and cut costs on their utility bills.

Technical characteristics and features of sunny furnaces

For a very long time, solar stoves are available for purchase online or in stores. They have a lot of helpful gadgets that make using the equipment easier.

The solar oven is the ideal travel companion because it is simple to use, folds up like a suitcase in a matter of minutes, and breaks down quickly into a functional position.

Industrial furnaces incorporate vacuum tubes and all the advantageous aspects of solar parabolic cylinder concentrators. As a result, the temperature during heating rises to 300 degrees Celsius.

The thermometer, which is an essential component of the control unit, is also integrated into the apparatus to regulate the temperature.

Together with the mirror rotation system, the thermostat is installed in the stove and set to a specific operating temperature.

The contemporary device has a timer built in that will start to close the mirrors inside the solar furnace after a predetermined amount of time. Additionally, the timer will sound a signal to let you know when the dish is ready.

Through the battery that is placed inside the case, the electronic component of the device receives power from the sun.

The following sizes are available for the suitcase in its collected form:

• 75 cm length;
• height of 40 cm;
• thickness – 11 cm.

At just 4 kg, the weight is manageable and suitable for long-distance carrying.

You can bake pies or cook meat, vegetables, and mushrooms in a furnace. The primary benefits are reduced electricity use and environmental friendliness. The machinery produces no environmental pollution.

In the realm of home heating and insulation, ensuring efficient and sustainable solutions is paramount for both comfort and environmental responsibility. This includes exploring innovative methods like the solar stove, which offers a modern and safe approach to cooking food. Harnessing the power of the sun, solar stoves utilize solar energy to heat up and cook meals without the need for traditional fuels like gas or electricity. Not only does this reduce reliance on finite resources, but it also minimizes carbon emissions, making it an eco-friendly option. Additionally, solar stoves provide a safe cooking environment by eliminating the risk of indoor air pollution and potential fire hazards associated with traditional stoves. Embracing such technologies not only enhances sustainability but also contributes to creating healthier living spaces for individuals and communities alike.

Varieties of sunny furnaces

There are three primary types of modern devices available:

1. Boxed.
2. With a mirror concentrator.
3. Combined.

Box furnace

The apparatus consists of a plastic or mirror-coated thermal insulation box. Many mirrors are added inside, acting as reflectors, to increase the amount of heat collected.

A comparable kind of apparatus is employed in gradual cooking. You can arrange a lot of goods on the box because it can be made to any size thanks to independent manufacturing. Large size differences do not exist in store samples.

A stove with a concentrator

The device is a concave mirror that gathers sunlight in its focus and reroutes it to a point that the user designates. Since the focus will be in the center of a large panel or other capacity with food, independent manufacture eliminates the need to precisely observe the geometry of the mirror.

The structure’s ability to reach a high heating temperature is one of its features. Using the equipment to reheat a small quantity of food is convenient.

However, the furnace also has a structural flaw in that sunlight must be continuously monitored, and the mirror must be turned and the beam must occasionally be redirected in the desired direction. If you don’t handle the stove with skill, you risk irritating your hands and eyes. However, by taking safety precautions, this issue can be avoided.

Combined

A combination of the two earlier choices is the combined type. A concave plate with a mirror surface is framed on one side of a box that holds a pan of food that needs to be heated. The stove folds up quickly and moves into operation.

Step -by -step instructions for making a sunny furnace with your own hands

It won’t be hard to gather a sunny stove with your hands. Various techniques based on extremely basic and intuitive drawings are available.

Concerns concerning the furnaces’ dimensions might arise from users. It’s best to base your decisions on the following advice:

1. If you need to make a stove for a summer house, or a country house, then think about the necessary and more fixed structure.
2. If the device is needed for a hiking, then the design should be collapsible and as easy as possible – for the convenience of transportation.
3. If the stove is planned by car, then the design can be made more complicated, but it should still be collapsible.

Using a standard umbrella is the most basic way to use a solar furnace. Considering how stable and comprehensible the device is, drawings are not necessary for manufacturing.

The interior of the open umbrella is adhered to with aluminum foil or mirror film. In order to prevent interference when the handle is placed in the center of the dishes to warm up, it must be disconnected. This completes the required work. The stove is all set up and ready to go.

It is now necessary to install a stand in the areas where a kettle and pot will be fixed, position an improvised mirror close to objects, and direct sunlight toward food tanks.

Some masters cover the inside of the umbrella with a sort of mosaic using a broken mirror. However, it turns out that this design is bulky and non-collapsible.

Boxed

When putting together a boxed structure, there are a few key considerations to make:

1. The walls located on the inside of the box are covered with foil, and should have a very good reflection.
2. The pan, placing inside, should absorb the sun"s rays, and therefore it is advisable to paint it black or smoke.
3. Thermal insulation should be at a high level. The walls of the box should fit tightly so that the heat does not go outside. To carry out high -quality thermal insulation, ordinary cardboard or other natural materials are used that will not distinguish harmful substances when heated. After assembly, the temperature inside the furnace can reach 170 degrees Celsius. But at the same time, the ignition of the box should not be afraid, since this temperature will not be enough.

The building of the structure will endure for at least ten years if you approach it with complete responsibility.

1. A reliable box is knocked down from the boards.
2. Inside, black paper is laid over the entire area (compacted). This is necessary so that the energy of the Sun is absorbed by the device as much as possible.
3. Based on the size of the resulting box, tin reflectors are cut out. The edges before installation should be rounded and treated with sandpaper so as not to cut.
4. Reflectors are fixed on top of the box. Ordinary loops or screws are used – at the discretion of the master. After the sheets are bending at the right angle to accumulate the sun"s rays to a specific object inside the unit.
5. The cover should be made of glass. In such images, ultraviolet rays are converted into the thermal energy necessary to warm up food.
6. It is advisable to build a small brick platform under the stove. They will accumulate the heat received.
7. If you want to monitor the temperature, the thermometer should be attached to the box.

This kind of solar stove is perfect for rural settings. Due to its size, insoluability, and relatively high weight, she won’t be able to bring it on a trip.

Mirror with the reflector

You can follow the drawing to assemble the structure or use the umbrella option that was previously presented to create a mirror furnace with a reflector.

1. It will be necessary to cut the petals of cardboard in the amount of 12 pieces.
2. After all the details are connected on the long side.
3. Next, the inner part of the resulting “plate” is fastened.
4. All parts are tightened with wire or a good rope at the base.
5. The plate is covered with foil, which well reflects the sun"s rays.

Combined furnace

The concentrator known as the combined type, which consists of multiple flat mirrors, is the easiest to produce. Additionally, a pan with adequate thermal insulation is required.

The internal object can be isolated using regular plastic bags.

Aluminum foil can be glued to a dense cardboard piece to use as a mirror.

The design’s ability to be folded and transferred makes it noteworthy. Measurements approximately: 33 by 33 cm. But you are free to gather big sizes as you please.

1. First you should prepare the basis for the body. It is advisable to use a plywood sheet. The center is placed and reliably attached aluminum or steel rod. Length – half a meter. A thread is previously made on the rod to place a stand on it in the future.
2. Grooves are made in which stiffener ribs are placed from plywood.
3. The walls are collected from the same plywood. Four rectangular sheets will be required. On the one hand, they should be cut off with a curved arc, and with an arc, the grooves are made for fastening with the ribs.
4. The connected parts are qualitatively covered with glue and connected. For additional fixation, it is advisable to use paper clips. After drying the box, you should shake the workpiece, weakly pull the walls to make sure of reliability. If the design has passed the test, you can proceed to the next stage. But in the event that some part is hanging out, then it will need to be put in place, pour glue again.

Once a box has been created, you can move on to the mirror.

1. You need a triangular dense cardboard with a smooth texture.
2. All parts of cardboard are overlapped and on the upper part of the attached ribs.
3. After fixing, cardboard is covered with a layer of glue. After the aluminum foil is applied after.
4. A stand is placed on the rod at a point equal to half the radius of the mirror surface.

The solar stove that you can build yourself is now operational. Aluminum is also used for boxes instead of trees. He is resistant to corrosion and has good heat conductivity.

The question of how to build a solar oven at home will be answered with instructions.

Advantages and disadvantages

As the self-collected sunny stoves are all the same size despite their differences in size, assembly is simple. Furnaces make it simple to build up enough heat to warm food. The basic idea behind the action is to absorb solar energy and direct it toward the required target.

The following benefits come with solar stoves:

1. Cheapness. You do not need to buy fuel for work and use additional energy sources. Only sunlight will be required to work.
2. Food is prepared as safe as possible – do not be afraid of fire, as when breeding a fire.
3. It’s easy to care for the stove and just operate – you just need to direct the sunlight to the desired object through the mirror surface.
4. Mobility. The stove is going quickly and disassembled. Therefore, there are no problems with transportation.
5. Environmental friendliness.
6. Food heats up evenly, and there is no risk of burning. I don"t need to mix food.

Travelers now highly value solar stoves because of these features. Just use a stove to cook food. All you have to do to cook food is aim the sun’s beam at the desired object.

Making the switch to a solar stove has many advantages for your home and the environment. First of all, it offers a clean and sustainable energy source by cooking food using sunlight and preventing the release of dangerous pollutants. In addition to lowering your carbon footprint, this lessens your dependency on non-renewable resources, which supports sustainability.

Additionally, solar stoves provide a handy and safe cooking option. Solar stoves do not pose a fire or air pollution risk inside, unlike conventional stoves that run on gas or wood. The ease of use and dependability of solar cooking are especially advantageous for families residing in areas with restricted access to electricity or clean cooking fuels.

The long-term cost-effectiveness of solar stoves is another benefit. Solar stoves require less maintenance and don’t require continuous fuel costs, even though their initial cost may be higher than that of conventional stoves. This eventually results in large energy bill savings and helps households maintain their financial stability.

Adopting solar cooking also supports initiatives to reduce climate change and encourage environmental stewardship. People can contribute to protecting the environment for coming generations by minimizing their use of fossil fuels and greenhouse gas emissions. Solar stoves encourage a greener and healthier world by enabling people to make sustainable decisions in their daily lives.

In conclusion, using a solar stove for cooking provides homes with a cutting-edge, secure, and environmentally responsible option. These cutting-edge gadgets encourage environmental responsibility while offering a sustainable substitute for conventional cooking techniques by utilizing solar energy. Adopting solar cooking has advantages for individual households as well as a more resilient and sustainable future for the earth.

Video on the topic

Future technologies. Solar stove. Barbecue and grill without a fire of electricity and gas

Solar stove

🌑 Powerful sunny concentrator 2000 ° C from a large satellite plate Igor Beletsky

We cook on a sunny furnace

Parabolar solar stove