Replacing sewage in the apartment. We change the old one to a new

While it may not be the most glamorous project for your home, upgrading your apartment’s sewage system is unquestionably one of the most important. Old pipes may break down over time, resulting in leaks, clogs, and even sewage backups. This may result in expensive property damage in addition to inconvenience and offensive odors. This post will discuss the value of updating antiquated sewage systems in apartments, tell you when it’s time for an upgrade, and walk you through the replacement process.

The safety and health of you and your family should be the main priorities when it comes to replacing the sewage system in your apartment. Antiquated plumbing fixtures may contain mold, bacteria, and other detrimental elements, endangering the health of your family. You can lessen your chance of being exposed to these risks and create a cleaner, healthier living environment by installing new, contemporary plumbing fixtures and pipes.

The sewage system in your apartment can also be made more efficient and functional overall by upgrading it. Older pipes are more likely to leak and get clogged, which means regular maintenance problems and higher water costs. Long-term benefits of new plumbing infrastructure investments include improved water flow, fewer clogs, and lower utility bills.

It’s critical to recognize when to replace your apartment’s sewage system in order to minimize disruption to your daily routine and avert future tragedies. A few typical indicators that a system upgrade is required are persistent blockages, unpleasant drain odors, sluggish drainage, and obvious indications of corrosion or pipe damage. It’s critical to take quick action in response to any of these warning signs in order to prevent later, more serious issues.

There are usually a few steps involved in replacing the sewage system in your apartment: assessment, planning, installation, and testing. Based on your needs and budget, a qualified plumber will evaluate the state of your current pipes, estimate the size of the project, and suggest the best replacement options. From there, they’ll create a thorough installation plan that will cause the least amount of disruption to your regular schedule.

Replacing the riser

An organization providing services replaces the riser. Sewer leaks are fixed for free, but residents are responsible for paying for the sewer to be replaced. Tenant liability extends to everything outside of the bell-up connection.

To replace the outdated sewage system, there are a few requirements:

• The pipes overgrow over time. Due to the roughness of cast iron, fat lingers on the walls and freezes, turning into something in the likeness of a stone. It is difficult to clean such pipes;
• The appearance of the sewer pipes leaves much to be desired;
• Leaks on bell -shaped joints and the appearance of cracks on the bells, capable of leading to the penetration of unwanted odors into the apartment;

For the article on replacing sewage in the apartment, we"ll focus on the importance of upgrading old systems for better functionality and environmental benefits. Replacing old sewage systems in your apartment is crucial for maintaining a healthy living environment and preventing potential hazards like leaks and blockages. By upgrading to newer, more efficient sewage systems, you can improve the overall hygiene of your home and reduce the risk of costly repairs in the future. Additionally, modern sewage systems often come with eco-friendly features that help conserve water and reduce environmental impact, making them a smart choice for both your wallet and the planet. Whether it"s due to aging pipes or the desire for better efficiency, investing in a sewage system upgrade is a wise decision for any homeowner looking to ensure their space remains safe, clean, and sustainable.

How to dismantle old cast -iron sewer

To dismantle old pipes, it is necessary to destroy the sealing. If the sewage system is kept with an organic fiber with oil impregnation and is covered with cement solution, take a flat durable screwdriver and hammer, and then destroy the caulder at the bell -shaped pipes. Then pull out all the fiber, compacting. In the apartments of the 50s-60s, it is easy to encounter the fact that when replacing the sewer bunks, they are flooded with gray. The melt of sulfur, hardened, provides tightness, but disassembling the bells during dismantling is inconvenient. If you need to remove them and leave it whole, it is necessary to heat them to the melting point of the sulfur and remove the pipe from the bell. The compounds need to be heated for a long time, the whole structure should warm up. Only in this case the sulfur will completely melt. All this operation is accompanied by the smell of sulfur. If the pipes are not needed, just saw them with a grinder.

What to change pipes

Installing standard PVC plastic pipes would be a great way to replace the apartment’s sewage pipes. Such a sewer is simple to disassemble and collect. To put the bells together, you don’t need to exert any effort or expertise. While a regular hacksaw can easily cut through PVC pipes, a grinder offers greater convenience in this regard. It is simple to disassemble the sewer and remove the obstruction that is causing it to clog. Usually, a floating rag or grease from kitchen plates fills this role.

The ideal substitute option for pipes is PVC. It is advised to install such structures if there is no justification for their abandonment. Their utilization in the future will be positively impacted by their numerous benefits. For instance, PVC sewers are aesthetically pleasing and simple to maintain. They are lightweight, easily assembleable, and quick to comprehend.

How to combine new and old pipes

Rubber cuffs are used to connect the old and new sewage pipes. The handcuffs are secured in a cast-iron bell and dragged along a plastic pipe. One subtlety exists:

Iron bell It must be thoroughly cleaned before putting a plastic pipe with a rubber product inside of it. Take off the inner walls’ outermost layers. A chisel will make this task the simplest. She gets rid of rust and other nasty stuff that’s left in the sewers perfectly.

After stripping the bell, it is necessary to wipe it dry with a rag and during connection it is advisable to apply a small layer of silicone sealant on the inner surface of the bell or the outer surface of the cuff. Firstly, he will reliably fill out all pores and eliminate the smell of sewage to the apartment. If a traction forms in the riser and, under certain conditions, through the slightest gaps, all smells can penetrate the apartment, so all connections should be absolutely sealed. Secondly, silicone will ensure absolute tightness even when the riser is clogged. Even if it is full, not a drop will spill into the apartment. With a thorough seal of all connections, water can only go to the plumbing device. Its role is usually played by the bathroom.

Than and how to fix the pipes to the walls

Plastic clips work well if the walls are level. Little and easily affixed, they stand one dowel-shurup. The pipe must be inserted into the clip and fastened after installation. This design won’t become popular.

It is preferable to use regular clamps if there is no discernible difference in the evenness of the walls. The only way they deviate from the clip is that they don’t make the slight adjustment to the wall’s distance.

How to lay a sewer

The sewer comb with a diameter of fifty millimeters stretches with a slope of 3.5 centimeters per linear meter. It is very easy to use the level and mark the desired slope. The average length of the comb in the apartment is one – two meters, and, accordingly, the end from the riser should be located above the other end of this comb by about 7 centimeters. There is one nuance: contexters are unacceptable. A plot with a controquelon is a plot where all the garbage will settle. If there, besides, the water is slowly moving, that is, you do not drain water from the bath, there are no volley discharges. In this case, the sewage system in the content will be overgrown with fat and other dirty tricks. There is one subtlety: if an automatic washing machine is connected after the tee in the opposite direction from the riser, then there will be no blockages even with contexters. Constant flushing with hot water and soap foam will do its job, and blockages will be excluded. The plumbers are considered a bad tone to lay the sewage system with context. This shows the non -professionalism of the specialist.

Use oblique tees to connect plumbing appliances with volley discharge. The sewer will overflow if you use a direct Tee. The water level in the tee that’s farthest from the riser will start to rise if it’s low. Leaks will start to show up if he is also prone to leaks. Their presence will add to the liquids and odors that enter the apartment.

The best course of action will be to tackle the plumbing challenge as replacing the sewage in the apartment by hand is a complicated process. It’s crucial to keep an eye on every detail you attach if you start replacing the pipes by hand. One incorrect move could have a long-term impact on the sewage system’s functionality. There is a chance that leaks will occur, and liquid and air will start to seep through them. Make sure the plumbing professional is qualified before making a call.

It’s a big job to replace the sewage in your apartment, but it can make life better and save expensive repairs. Replacing worn-out, outdated pipes with new ones is an investment in your home’s long-term functionality and health.

Antiquated sewage systems are vulnerable to corrosion, leaks, and blockages, which can result in water damage, foul smells, and even health risks. Modern, long-lasting piping materials are an upgrade that can solve these problems and give you peace of mind.

Planning for future savings is just as important as budgetary considerations when it comes to replacing sewage systems. Even though the upfront cost might seem high, the advantages of increased productivity, lower maintenance costs, and a lower chance of emergencies make it an investment well worth making.

Additionally, changing your sewage system gives you the chance to switch to greener alternatives. Selecting eco-friendly materials and water-saving fixtures can help you cut down on your environmental impact while simultaneously lowering your utility costs.

To sum up, replacing the sewage in your apartment is an investment in the sustainability, comfort, and safety of your house rather than just a maintenance chore. You can have peace of mind knowing that your plumbing is in excellent condition and that it is helping to create a healthier environment by choosing a modern, efficient system.

Video on the topic

The easiest way to dismantle the old cast -iron sewer tee

How to replace sewage pipes in an apartment from the USSR

Installation of pipes in the bathroom and in the kitchen. Horrors of dismantling of cast -iron sewer pipes in my grandmother"s apartment

Complete replacement of cast iron sewage with plastic in Khrushchevka

How to change a cast -iron tee on sewage in 20 minutes?! / The whole process of work

How to switch from cast iron to a plastic pipe, a master in the house 62tv,,