Relocating the toilet from the riser to another location: when design trumps everything else

Some aspects of home design are frequently disregarded until they become obvious problems. The location of the toilet within the home’s plumbing system is one such component. The placement of the toilet within the riser may seem like a small detail, but it has a big impact on a home’s overall usability and beauty.

The standard location of the toilet may not be ideal for many homeowners. It could be inconveniently placed, crammed into a tiny area, or hidden away in a corner. Under such circumstances, moving the toilet to a new spot can greatly improve the house’s overall layout and flow in addition to being extremely practical.

But moving a toilet involves more than just picking it up and putting it somewhere else. It entails meticulous planning, taking plumbing requirements into account, and following building codes. Sometimes, though, redesigning the layout is worthwhile because the advantages outweigh the drawbacks.

To make the best use of available space, moving a toilet is one of the main causes. Bathrooms are often small and poorly designed in many homes, especially older ones. Homeowners can recover valuable space and create a more comfortable and functional space by relocating the toilet inside the house.

Furthermore, the aesthetic component is indispensible. The way a toilet is positioned can greatly affect a room’s aesthetic appeal. Relocating the toilet gives homeowners more control over how their living area looks, whether it’s by making the bathroom more light and airy or by blending it in seamlessly with the rest of the design.

In the end, there are situations when form must take precedence over function in home design. Moving the toilet off of the riser to a different spot is a great illustration of how well-thought-out design choices can improve a home’s usability and beauty. Through consideration of various elements like plumbing needs, visual appeal, and space usage, homeowners can make their living spaces more aesthetically pleasing and functional.

"Pitfalls" of these works

At first glance, moving plumbing equipment away from the riser appears to be a very straightforward and trouble-free solution. However, this isn’t the case in practice. Trouble could arise if the length of the sewer pipes approaching the equipment increases. Excessive rarefaction during flushing will cause them to break down, along with the water traps in all neighboring plumbing appliances. Gurgling noises and incredibly repulsive sewer odors will accompany this process.

Many times, the only way to maximize the amount of space in the bathroom is to move the sanitary equipment away from the sewer riser.

An additional issue is the higher chance of clogging. The pipe that joins the device to the sewer riser gets longer when the equipment is moved. As a result, the sewage’s path is extended. In theory, the sewage will eventually reach the sewer regardless of the circumstances, but the likelihood of blockages increases significantly. Strict adherence to the existing SNiP regulations can resolve both issues. The removal of a sanitary appliance from a pipe that is longer than 1.5 meters is forbidden by the document.

The pipeline’s inclination is another significant indicator. In the case of parts with a 100 mm diameter, it ought to be at least 2 cm per meter. It is recommended to lay parts with a diameter of 50 mm at a minimum slope of 3 cm per meter. It is necessary to fulfill this requirement precisely. Clogs may appear as a result of sewage flowing at a slower velocity when the slope is reduced. An excessively steep slope is also undesirable. If so, water will flow through the pipes too quickly, clogging them with solid pollutants. They will progressively build up inside the pipes, blocking the liquid’s natural outflow.

The bathroom’s owner frequently realizes that raising the toilet bowl will be necessary to guarantee a suitable slope of the sewer pipe, and the lift’s height can be fairly substantial. Everything is dependent on the pipe’s diameter and how far the device should be removed. The problem can be solved in one of two ways: either install a sort of podium under the toilet bowl or raise the bathroom floor and conceal the pipeline. Although the second option is more frequently used in practice, both are quite viable. as the most practical and least labor-intensive option.

The equipment can be positioned on a designated podium to guarantee that the pipeline slopes as specified by SNiP.

One additional consideration should be made when organizing the equipment transfer. From the riser to the toilet, the pipe should be installed in a straight line with no angles. If this isn’t feasible, two 45° turns should be set up in place of a harsh 90° bend. In order to reduce the chance of clogging, this is required.

SNiP puts quite strict requirements for the transfer of the sanitary appliance and all of them must necessarily be fulfilled, otherwise problems with the operation of the equipment can not be avoided. It should be understood that if the toilet bowl needs to be moved more than 1.5 m, the recommendations of SNiP will not "work". In this case, it is necessary either to relocate the sewer riser itself, which is practically impossible, or to install a forced sewer system. The last option can be used and with a smaller distance from the riser to the toilet, provided that there is no possibility or desire to bother with laying the pipe with the necessary slope and rise in the floor level in the bathroom.

When it comes to home improvement, strategic design choices frequently take precedence over pragmatic considerations, particularly when it comes to moving the toilet from its customary location in the riser to a new location inside the house. There are a number of reasons for this change, from improving the look to making the best use of available space. Homeowners can seize opportunities to design bathrooms that are both more aesthetically pleasing and functional by giving design considerations top priority. The choice to move the toilet highlights the transformative power of thoughtful design in defining the ambiance and functionality of a home, regardless of whether it was motivated by architectural innovation or the desire for a more personalized living space.

Technology of transferring the toilet bowl

The device’s rotation angle can be adjusted to move the equipment to a different distance. There is a difference between an easier and a harder version of the transfer depending on this.

Variant #1 – transfer of 10-20 centimeters

It is considered that the equipment is moved a short distance—no more than 10–20 cm. Take out the old appliance first. It will require some labor to disassemble the device if it was "planted" on glue or cement and its outlet is similarly covered in cement. The toilet bowl can break with just one incorrect move. If a new device is to be installed, you cannot handle the old one carefully. If this is not the case, turn off the water and carefully carry out the following steps:

• Free the caulk from the space between the appliance outlet and the sewer socket. To carry out manipulations, you can use a narrow chisel or a sturdy screwdriver.
• Carefully loosen the toilet bowl. To do this, carefully hammer a wide chisel under the base in different places. Repeat the operation until the device does not start swinging.
• Raising the toilet bowl. First, pull the device toward you and remove the outlet from the socket of the sewer pipe strictly along its axis. Plumbers warn that if the device gets stuck and will not feed, it is not possible to pull strongly. It is necessary to swing the appliance very carefully and then pull it again.

It is far simpler to remove the equipment that is mounted on regular fasteners and linked to the sewer by a rubber collar. It will be necessary to remove the screws holding the device in place in order to disassemble it. Next, we remove the outlet from the device and feed it strictly in the direction of the sewer pipe’s axis.

All operations are done with extreme caution if the toilet bowl is to remain functional after disassembly. With great care, the putty that fixed the device’s outlet in the sewer socket is destroyed.

Once everything is finished, you can begin getting ready for the device to be installed in a new location. Examine the outdated flexible hose. Replace it with a suitable model if its length is insufficient or if it leaks. Keep everything in its original state if the part is in good condition.

It is much simpler to disassemble a toilet that is plugged in using a corrugated pipe. All that needs to be done is take the appliance’s fasteners off and remove the flexible corrugation.

Corrugated pipe is required to connect the toilet bowl outlet to the sewer socket. Even though it has rubber seals on both ends, it is still advisable to use silicone sealant just to be sure. Furthermore, unique fasteners need to be ready. Plastic washers must be present on the steel fasteners because it is crucial that they not press up against the sanitary ware. Install the device next:

• Mark on the floor the places for fasteners. Drill holes. If you have to work with tiles, first pass the tile with a special drill bit with a slightly larger diameter.
• Clean the sewer socket and toilet bowl outlet and wipe them dry.
• Apply silicone sealant on the corrugation. Put it on the outlet of the equipment.
• Install the device in place, insert the fasteners into the prepared holes and carefully tighten them. After the device stops wobbling, stop tightening the fasteners immediately.
• The remaining gaps between the floor and the base are sealed with mortar. In this way we create an additional support that will not allow the lateral force to destroy the foundation.
• Lubricate the second part of the corrugation with sealant and insert it into the socket.

Keep in mind that the toilet bowl is a relatively delicate piece of sanitary ware, so proceed with extreme caution.

Corrugation is a flexible connecting component that makes connecting the toilet bowl to the sewer system much easier. Its primary flaw is its lack of durability.

Option #2 – long-distance relocation

The sewer system will need to be redesigned if the device needs to be moved farther than the length of the corrugation. The process of taking the device apart and then reassembling it is the same as for the variant that was previously mentioned. The sewer’s extension is where the differences lie. The most common plastic pipe used for this procedure has a diameter of 110 mm. The new location of the toilet bowl determines the quantity, length, and arrangement of connecting components. Plastic pipework is installed on the ground or fastened to walls using specialized clamps.

There are a few details to which particular attention should be given. The toilet outlet from the cross or tee must be removed in order to lower the sewer to the floor level. Plastic components don’t have any trouble with it. It is best to first heat the socket using a gas burner or blowtorch if the parts are cast iron. This is done in order to cause the cement putty to crack and the sealant to burn through. Sulfur-filled joints are additionally burned to annealing temperature. In this instance, there is an overpowering, disagreeable smell. Using a gas mask and properly venting the room are requirements.

The pipe can then be easily removed from the socket. Starting a new pipe installation from the riser pipe is the best option. Remember the required slope in this situation, which is roughly 1-2 cm per linear meter. The best method for inserting a plastic pipe into a cast iron socket is to use a sealing collar. The ideal way to install it is to lubricate the joint beforehand with silicone sealant.

It is important to install the toilet bowl with special fasteners very carefully. It is crucial to keep in mind that the sanitary ware should not come into contact with the steel screws. Make sure to use gaskets when installing them.

The most straightforward, albeit transient, method of connecting the toilet is through the use of corrugated pipes. It is only utilized in situations where giving the connecting element unhindered access is feasible. An additional option is to use a special transition pipe, which is slightly trickier to install than corrugation but provides a stronger and more dependable connection. There may also be a link to the linen winding method. Although it’s outdated, this is still a solid choice.

Sometimes design must take precedence over functionality when it comes to home renovations. Relocating a toilet from its original riser location to a new location within the house is one example of this. Even though it might only seem like a small adjustment, it can have a big impact, especially in terms of functionality and appearance.

In these situations, design considerations frequently take precedence. It’s possible for homeowners to aim to better integrate the toilet into the overall design scheme of their home, or they might want to create a more visually appealing or spacious bathroom layout. Relocating the toilet gives homeowners more creative freedom when designing and arranging their spaces, allowing them to realize their ideal aesthetic vision.

But moving a restroom is not a decision that should be made hastily. It’s also important to give careful thought to practical issues like building codes and plumbing logistics. Rerouting plumbing lines is necessary when moving a toilet, and it can be an intricate and expensive process. It is the responsibility of homeowners to make sure that the new location satisfies local codes and is feasible in terms of plumbing infrastructure.

For many homeowners, the advantages of moving a toilet can exceed the disadvantages, despite any potential difficulties. They can create more aesthetically pleasing and functional environments in their living spaces by giving design considerations priority. The choice to move a toilet highlights the significance of striking a balance between form and function in home design, whether it’s for creating a spa-like retreat or making the most of space in a tiny bathroom.

Video on the topic

Moving the toilet bowl.Installation of the toilet bowl.With your own hands.How to move the toilet bowl.

Moving the toilet bowl inside the wet zone. Read more in the comment #replanning #replanning of the bathroom

How to move the toilet bowl from the bathroom to another place in the apartment / Saniaccess 3

Relocating the plumbing in the apartment. What is possible?

💡 Connecting the WC with FLAT PIPES close to the wall. The main thing is not to piss!

APARTMENT REPAIR. HOW YOU CAN NOT MAKE A TOILET #120

Bathroom and toilet remodeling. How it is possible?