Polynor sprayed insulation: foamy product in cylinders, technical specifications, reviews: who used

Insulation is essential for keeping our houses cool during the sweltering summers and warm during the winter. Selecting the best insulation option can be difficult due to the abundance of options on the market. One of the innovative products that have gained attention recently is Polynor sprayed insulation. Due to its easy application and efficacy, this foamy product, which comes in convenient cylinders, has been making waves in the home insulation industry.

What distinguishes Polynor sprayed insulation, then? First of all, it forms a smooth barrier against heat transfer because of its special foamy consistency, which enables it to expand and fill in even the smallest gaps. For you and your family, this translates to fewer drafts, lower energy costs, and a cozier home. Its application procedure is also reasonably simple, which makes it a popular option for both professionals and do-it-yourselfers.

However, it’s important to find out what other people think of it, just like with any other product. Perusing evaluations from individuals who have utilized Polynor sprayed insulation can yield significant knowledge. First-hand accounts, whether from contractors praising its efficiency or homeowners raving about noticeable energy savings, can assist you in making an informed choice. Now, let’s examine the features, customer feedback, and practical uses of Polynor sprayed insulation to determine whether it’s the best option for your house.

The form of release

Since 2013, sprayed insulation has been known about. It is a closed-structure, one-component self-grown mixture.

This thermal insulation is available in construction stores in cylinders that resemble standard mounting foam for firearms.

Together with construction foam, it is applied. Reviews state that one cylinder will provide a one square meter area with a five centimeter layer of insulation. According to the manufacturer’s instructions, the service life will be at least 35 years if no adverse factors affect it.

Professionals and customer reviews

After being used for a few years, Polinor insulation has already gained praise. The novelty was preferred by many professionals who have used polyurethane foam for a long time. It is observed that it lays perfectly on any surface, is incredibly simple to install, and operates well. High levels and rapid passage of thermal insulation are observed.

It should be noted that the material is extremely toxic, so safety measures should be taken. Wear protective clothes, gloves, respirators, and glasses to protect yourself. Should foam come into contact with the skin, it is best to wash the area thoroughly and see a physician.

Customer reviews also point out that polynor insulation is fairly pricey, but this shouldn’t be the deciding factor when selecting a heater. There will be opportunities to reduce the amount of heating in the room due to its exceptional characteristics and speed of application.

Because of the material’s extreme toxicity, safety measures should be followed.

Additionally, professionals frequently favor this content. Its lightweight design and ease of use can drastically lower the upfront and ongoing expenses associated with installing insulation.

The main properties of the material

Polinor sprayed insulation. Its feature highlights the superior technical qualities that set it apart from other materials:

A parameter of knowledge

Density	18-28 kg/m3
Water absorption by volume	0.02
Coefficient of thermal conductivity	0.023-0.025 W/MK
Temperature regime	From -25 to +120 ° C
Coating thickness	25-60 mm
Probable service life	35 years
Polymerization speed at t = 20 ° C	40 min
The term of complete drying	Up to 3 days
Destruction during compression, shift.	Absent up to 50%
Group of combustibility	G3

Features of installation of sprayed thermal insulation

Polynor’s foamy insulation is superior to rolled and slate thermal insulation materials in terms of the intricacy of the insulation arrangement.

Polynor is able to provide thermal insulation for a wide range of surfaces, including those that are horizontal (such as floors and flat roofs), vertical and inclined (such as walls, facades, and roofs), and complexly shaped (such as water supply pipes and wells).

Polinor insulation can be completed by one person on their own, without assistance. Peny thermal insulation is applied in small cylinders that are large enough to cover one square meter (using a heat-insulation thickness calculation of six centimeters).

It is important to note that a package like this contributes to savings because it makes calculating the number of cylinders needed for insulation—given their productivity—very easy.

It is essential to meticulously prepare the insulated surface prior to beginning thermal insulation using polynor. Dust and mechanical pollution are removed from the walls, floors, and roofing in the house.

If any defects in the house’s construction are found, they must be fixed to prevent further spread of the damage. Cracks in concrete, brick, or gas silicate walls should be repaired with a glue-and-cement mixture.

The insulated surface is then broken down with any kind of organic solvent, such as toluene, acetone, or 748. This is necessary since polynore adheres to greasy surfaces far less readily than it does to a clean brick wall.

Setting up the mounting pistol for Polinor

PPU cylinders should be kept in air temperatures between 18 and 30 degrees before work begins. In the past, the cylinder shook for two to three minutes before applying.

Since it is not included with the Polynor cylinders, a special pistol is required to apply thermal insulation. This pistol must be purchased separately.

You will also receive a universal nozzle that regulates the supply and consumption of the foam PPU, enabling you to use any foam tuning pistol to spray polynore in addition to the polyurethane cylinder.

Install the nozzle on the pistol trunk (without clicking first), then take off the cylinder’s lid. Next, screw the pistol bar into the PPU cylinder so that it is vertical.

Generally speaking, the polyonor’s thermal insulation layer shouldn’t be thicker than six centimeters. The mounting pistol’s trigger pressure controls the amount of foam that is used. Every few minutes while working, you must shake the balloon itself (you must hold onto the cylinder, not the mounting gun).

Strict adherence to safety protocols is required when applying thermal insulation because non-fainly polyurethane foam can be harmful to humans.

Installing Polynor requires wearing a protective suit or, in the absence of such gear, using building glasses and gloves because PPU can irritate the eyes, mucous membranes, and skin areas that come into contact with it.

Thermal protection of the attic polynor’s walls

Reviews about products

29-year-old Victor from Rostov:

Used polynor to insulate the attic floor from heat. The insulation demonstrated itself flawlessly in terms of ease of installation and thermal insulation qualities. It is much less expensive than other heaters of comparable quality, requiring 22,000 rubles to cover 45 square meters of space. I recommend!

39-year-old Oleg from Moscow:

About two years ago, Polinor dealt with thermal insulation for the first time; ever since, this has been my primary insulation. He’s already finished the brick garage, the cottage outside the city, and the house’s thermal insulation. All that’s left is to heat the attic. I do not believe that there is thermal insulation available that offers the best value for the money.

Features of applying thermal insulation Polinor (video)

Calculate your home insulation

Reviews

The opinions of those who utilized this thermal insulation system were expressed. Read the evaluations we gathered from forums and building websites:

Learn about reviews for Polynor. So I thought I’d give it a shot. The paragraph’s base was shielded. Using polynor, I wanted to blow out the seams. The material was sprayed well, and nearly all of it came out of the cylinder. However, it’s crucial to be aware of the expiration date. After blowing out the first cylinder, I went to another store to buy the second. Used half, followed by a slurry of some sort. Upon closer inspection, I noticed that the shelf life had already passed. Thus, you must take note of this. But all in all, I’m happy!

The loggia needed to be insulated. I made the decision to browse the Polynor reviews on the forums. It was enjoyable to me. I got a briefing, bought it from Leroy, and completed it on my own to 12 squares. I’m happy with how things turned out. Both inside the apartment and on the loggia in late autumn are cozy. Foam particles only fly when spraying in the air, so everything must be closed.

Ground floor apartment. To lessen the amount of cold air I was pulling up from below, I made the decision to insulate the floor from the basement. I am aware that insulation has been sprayed. I chose to give Polinor Polynor Reviews a try. I cleared the entire desired area, which was roughly 36 square meters, in about three hours. Everything was great, but you must get enough air to avoid collapsing from shock. The basement is difficult to ventilate, so the work’s quick completion was very beneficial.

You can review Polynor insulation after using it by leaving a comment below.

Advantages and disadvantages

When compared to similar products from other manufacturers, this kind of thermal insulation material is easier to install because it doesn’t require building a frame or using materials like films, isospin, adhesive composites, fasteners, reinforcing mesh, and the like. This heat insulator comes in handy when working in areas that are difficult to access, have limited space, and have a complex profile of the surface being worked on.

Electricity consumption and the need for specialized equipment are not necessary with Polynor application technology. In comparison to other comparable heat insulators, this material has one of the best thermal conductivities. It also stands out for its outstanding adherence to a wide range of building materials, including metal, glass, and concrete, brick, and wood.

Polynor has a low degree of consumption and a very high coating speed, covering an area of 1 m2 with this material in one to two minutes at most. A square meter of surface can be covered with a six-centimeter layer using one cylinder with a volume of 1000 ml.

After one hour for this heat insulator to polymerize, Polynor’s covered surface can be painted, plastered, or treated with any other coating or protection. This environmentally friendly material has a long work resource—roughly 35 to 50 years—and does not identify hazardous volatile compounds while in use.

Apart from providing thermal insulation, Polynor also acts as a soundproof material, repels rodents and insects, and is impervious to biological factors like fungal mold.

The material’s drawbacks are that, unlike mounting foam, it is not affected by direct sunlight and that it deteriorates quickly when it comes into regular contact with water. Installation of Polynor is feasible within a slightly restricted temperature range.

Its spraying procedure makes it challenging to apply a layer of consistent thickness, which can lead to heterogeneous thermal conductivity in the final coating. Therefore, having experience working with this material is necessary for better, more consistent spraying. In this instance, the manufacturer’s recommendation—which states that the applied layer’s thickness should not exceed 6 cm—should be considered.

The cylinder can be used at any temperature between +18 and +35 °C while it is operating. As was previously mentioned, this waterproofulator is toxic when in use, necessitating the use of personal protective equipment.

Since polynor has the same hygroscopicity as other materials, it creates a sealing effect on surfaces it covers, impeding the absorption of steam. An additional construction gun with a specialized nozzle must be purchased in order to supply insulation in cylinders. The manufacturer states that without guns or nozzles, the quality of the spraying process is greatly diminished, so replacing them will be necessary in the event of a loss or malfunction.

Advantages and disadvantages

From favorable attributes, they differentiate:

• insulation in cylinders called Polynor, unlike other thermal insulation materials, does not require the arrangement of the frame (we are talking about films that reinforce mesh and the like);
• It is convenient for them to work, especially if a hard -to -reach area or surface with complex geometry is processed;
• To spray thermal insulation, additional equipment and connection to the mains will not be needed;
• Suitable for processing brick, wooden, metal, glass and other surfaces;
• Compared to traditional insulation has increased thermal conductivity;
• increases the speed of work. To apply a layer of 1 m2, it will take no more than two minutes;
• low consumption. One cylinder of the pompous insulation Polynor, with a volume of 890 ml, is enough to cover the surface of 1 m2 with a thickness of 5 cm;
• hardens the material for an hour, after which other coatings are applied on top of it, for example, paint or plaster;
• According to the manufacturer, the service life reaches 50 years;
• Along with thermal insulation, soundproofing also provides;
• will not become a “home” for rodents that love to spoil the insulation materials.

Polynor is isolation for cylinder wall insulation in the form of foam. This material has a new generation and several drawbacks in addition to its benefits.

• Direct solar radiation negatively affects it;
• It will not last long if it is often exposed to moisture;
• restrictions during spraying. Namely, the temperature of the cylinder should be in the range from +18 to +35 degrees Celsius;
• toxic during work until it dries. In this regard, personal protective equipment is required, that is, masks, gloves and the like;
• Using the first time, it is difficult to apply a layer of perfectly flat thickness;
• As the manufacturer recommends, the maximum layer thickness should not exceed 6 cm;
• after application, sealing the surface, preventing it from “breathing”;
• For work, you will need to buy a construction gun equipped with a nozzle.

Very useful information! In terms of fueling, Polynor is a material that is self-adjacent, provided that open fire does not directly affect it.

Application technology

Because the functioning characteristics of this insulation are affected by freezing temperatures, store cylinders in a warm room. Applying polynor to the clean surface and the crate will depend on how the finish is achieved. Even a novice can complete the application process because it is so straightforward (although estimating thickness won’t work).

However, just like with other heaters, the working surface must be thoroughly cleaned of pollutants before applying polynor. Should there be any imperfections on the wall, they ought to be fixed. For instance, the insulation’s qualities won’t be impacted by the crack, but that won’t stop her from spreading. As a result, it is preferable to fix any flaws right away.

A detailed degree of the plane is the next step, for which unique compositions are employed. The truth is that Polynor will not stick well to an oily surface. They then start to spray after screwing the cylinder into the gun.

The layer is 5 centimeters thick on average. Apply a specific amount of force to the gun’s trigger to change the pressure.

Take note: It is best to shake the cylinder every few minutes. Safety precautions need to be considered because, in its untested state, the insulation poses a health risk.

Once the composition is applied to the wall, it fills in all of the nooks and crevices and freezes to create dependable insulation.

1 m2 consumption

This insulation is very cost-effective, as mentioned in the benefits. The following is the consumption of the polyurethane foam material in the cylinders: One liter will cover a one-meter-square wall that is four centimeters thick. In contrast, you will need to spend more when working with mineral wool. Insulation requires not only the material itself but also other, more expensive components like fasteners, crates, and the like.

The required thickness of the layer

Everything is dependent upon the location of the object. To provide clarity, a table has been included that specifies the appropriate layer thickness for each element.

The scope of application

The insulation’s description introduces us to a contemporary, practically universal substance that is frequently used as a finishing and warming agent, specifically:

• for facades for finishing;
• for foundations and attic premises;
• for balconies;
• for insulation of the internal walls of the structure, partitions in various buildings;
• for isolation of communication systems;
• In vehicles with isothermal functions.

The extent of the use is evident. This makes sense because the heat insulator has excellent performance characteristics—it fits perfectly on any surface, is incredibly flexible, and won’t break even if a surface crack occurs. The substance completely absorbs vibration and sound waves and is not toxic.

Selecting the appropriate insulation for your house is essential for cost savings, comfort, and energy efficiency. Homeowners are choosing Polynor sprayed insulation because of its special qualities and simplicity of use.

The foamy consistency of Polynor sprayed insulation is one of its best qualities; it expands and fills gaps with ease. Because of this, it’s perfect for caulking those difficult-to-reach places and guaranteeing that your house is adequately insulated against heat and cold.

Regarding technical specifications, Polynor delivers as promised. Because of its superior thermal resistance, your house will stay cool in the summer and warm in the winter. Its ability to withstand moisture also helps keep mold and mildew at bay, promoting a healthier interior atmosphere.

The overwhelming response from users of Polynor sprayed insulation has been positive. Following installation, many homeowners report observable reductions in both their energy costs and comfort levels in their homes. Furthermore, the application’s simplicity has been commended, as many do-it-yourselfers find it to be easy to use.

To sum up, Polynor sprayed insulation provides a foamy, practical answer to your house’s insulation needs. It is unquestionably worthwhile to take into consideration for your upcoming insulation project due to its remarkable technical specifications and favorable user reviews.

The use of Polynor sprayed insulation is growing in popularity among homeowners who want to increase the energy efficiency of their houses. This foamy product comes in handy cylinders and fills even the smallest gaps with its excellent coverage and easy application. Its exceptional durability and resistance to heat are highlighted in its technical specifications. Its success in lowering heating expenses and preserving constant interior temperatures has won praise from many users. Its ease of use is frequently mentioned in reviews, which increases the accessibility of DIY insulation projects. Polynor could revolutionize your home’s insulation options if you’re thinking about them.

Video on the topic

Sprayed insulation in cylinders. Review.

Sprayed insulation

Polynor. What happens in 4 years.