Oil heater with your own hands

For many homeowners, keeping their house warm during the winter months can be of utmost importance. Although there are many different heating options, the affordability and efficiency of an oil heater make it stand out. Even better, you can build one yourself, customized to meet the unique requirements of your house. This post will go into the realm of do-it-yourself oil heaters, explaining how they operate and offering detailed instructions on how to construct one for your own house.

The basic idea behind an oil heater, sometimes referred to as a homemade oil-filled radiator, is to heat oil inside a sealed container and then circulate it through the heater to produce heat. Oil heaters are an affordable substitute for traditional heaters that run on gas or electricity because they run on waste oil or vegetable oil, which are readily available materials.

Building your own oil heater has many benefits, chief among them being the customization that lets you tailor it to your tastes and needs. You can modify the heater’s size and design to fit your space, regardless of how big or small your home is. Furthermore, DIY oil heaters give you more control over temperature settings, letting you modify heat output to suit your preferences.

You don’t need specialized tools or highly developed technical knowledge to build your own oil heater. You can confidently start this DIY project with simple tools and materials that you can buy at hardware stores. Furthermore, building your own heater can be a fulfilling experience that will empower you to take control of the heating system in your house and give you a sense of accomplishment.

Materials needed	Instructions
Empty metal container (e.g., old paint can)	Drill holes in the bottom for airflow.
Insulation (e.g., fiberglass or ceramic fiber blanket)	Wrap the container to conserve heat.
Heating element (e.g., immersion heater or nichrome wire)	Install inside the container securely.
Thermostat	Attach to regulate temperature.
Power cord	Connect to the heating element.
Electrical tape or wire nuts	Secure connections and prevent shocks.

The right homemade heater for the house

Irrespective of the kind of heater produced and the energy source employed, the apparatus needs to fulfill the subsequent specifications:

• be simple to manufacture;
• have a low cost of construction materials and elements;
• to have a high performance;
• sufficient power;
• be safe to use;
• be cost-effective in terms of manufacturing and energy consumption;
• as compact as possible;
• simple and easy to use.

Any factory-made heater can boast of economy, efficiency, and safety. Increased power, productivity, and ease of use are characteristics of homemade equipment; however, safety is a contentious matter. For this reason, before being used extensively, any DIY heater for the house must be tested.

A few best practices for winter and off-season heating of your dacha.

This article will help to explain how to heat a dacha without gas if you have that question.

Efficient infrared radiator

Any infrared radiator used to heat the space has a high efficiency factor and is known for its efficiency. All of this is made possible by a special operating principle. Infrared waves raise the surface temperatures of items in the room without interacting with the air.

After that, those give the air thermal energy. Thermal energy is thus produced by converting the maximum amount of radiant energy. Because of their great efficacy and efficiency as well as the inexpensive structural components, infrared heaters are becoming more and more independently manufactured by regular people.

Infrared emitter made of dust graphite. room heaters made at home,

Comprising the following components and functioning in the infrared spectrum:

• ground graphite to dust;
• epoxy glue;
• two equally sized pieces of transparent plastic or glass;
• a wire with a plug;
• copper terminals
• thermoregulator (optional);
• wooden frame, commensurate with the pieces of plastic;
• brush.

The work surface is first made ready. Two identically sized pieces of glass—for instance, one meter by one meter—are taken for this purpose. Contaminants such as paint residue and oily hand prints are removed from the material. Here’s where booze becomes useful. Proceed to the heating element preparation after the surface has dried.

Here, graphite dust serves as the heating element. It is a high resistance electric current conductor. The graphite dust will begin to heat up when it is connected to the power supply. When it reaches a high enough temperature, it will start to release infrared waves, and you can make an infrared heater for the house with your own hands. However, we must first secure our conductor to the work surface. To achieve this, combine the adhesive and carbon powder and stir until a homogenous mass forms.

Homemade space heater.

Make tracks of a graphite and epoxy mixture using a brush on the previously cleaned glass. This is completed in a zigzag design. The graphite strip should end and begin on the same side as the zigzag loops, and each loop should not extend 5 cm beyond the glass’s edge. Making indentations from the glass’s edge is not required. There will be terminals for connecting electricity in these locations.

Position the glasses so that the graphite-coated sides are facing each other, then secure them with glue. To increase dependability, the final product is set inside a wooden frame. Copper terminals and a wire to turn on the device in the power grid are attached to the graphite conductor’s exit points on various sides of the glass. The room’s homemade heaters should then be left to dry for a day. A thermostat can be attached to the chain. This will make using the equipment easier.

What benefits does the end product offer? Its cheap production costs are a result of its use of unconventional methods. The temperature on its surface never rises above 60°C, so you cannot burn yourself on it. You can choose to decorate the glass surface with a variety of pattern-filled films without compromising the integrity of the interior composition. Do you want to build DIY gas heaters for your home? The video will assist in resolving this issue.

Infrared film warmer. It is advised to use ready-made film materials with infrared wave capabilities for full heating of a medium-sized room. On today’s market, they are widely available.

When purchasing a film material, you should consider the heating element’s composition. Lead must not be present in the latter. It poses a health risk. A quality certificate is a must for any product of superior quality.

Essential structural components:

• IR-film 500 mm by 1250 mm (two sheets);

foiled, foamed, self-adhesive polystyrene;

decorative corner;

double-core wire with a plug;

polymer adhesive for wall tiles;

decorative material, preferably natural fabric;

decorative corners 15 cm by 15 cm.

Preparation of the wall surface for a homemade heater for the apartment begins with fixing the thermal insulation. Its thickness should be at least 5 cm. To do this, the protective film is removed from the self-adhesive layer and polystyrene is fixed to the surface with foil upwards. At the same time, the material should be tightly pressed against the wall. An hour after the work is finished, you can proceed to the next step.

The IR foil sheets are joined to one another in a sequential manner. Using a spatula, apply glue to the back of the material. Everything is fastened to the polystyrene that was previously mounted. Fixing the heater securely will take two hours. Next, the thermostat and cord with plug are fastened to the foil. Decorating is the last step. This is accomplished by fixing the prepared fabric over the film using ornamental corners.

Is heating really that important for a bathhouse, and if so, how can it be made cheaply?

These calculations can be used to determine the precise amount of gas needed to heat a cottage.

Making an oil heater with our own hands

Handcrafted register featuring an air vent and a heating element.

How can you create a powerful heater for your home using only your hands? You should focus on the oil radiator factory models in order to accomplish this. Putting them into practice independently is not tough. A few nuances are necessary for you to accomplish this. Additionally, read. "How to assemble the heating register and connect it."

The tank beneath the future radiator must, first and foremost, be completely airtight. If not, the coolant will leak out, causing the heating element (TEN) to overheat. As a result, knowing a few basic metal welding techniques is essential. We discussed them in the section on heating-pipe welding.

Second, transformer oil, if it’s available, should be used as the coolant in this instance. It ought to fill the heater’s tank to 85% full. The air occupies the remaining space. It is essential to avoid hydrostroke. Thirdly, a steel heating element is used when the heater is housed in a cast-iron tank. A copper heating element works well for a tank made of stainless steel. This system is not compatible with magnesium anodes.

• old, cast-iron radiator or steel pipes with a diameter of 15 cm, pipes with a diameter of 7 cm;
• TEN;
• transformer oil;
• thermostat;
• a two-core cord with a plug at the end;
• pump up to 2.5 kW.

Electrodes, a drill, a set of drills, and a welding machine will all be needed for the task. Pliers are required. constructing an oil heater for

The radiator’s lower end is where the heating element is placed.

Apartments by hand, starting with the tank’s preparation. If a cast-iron battery that was taken from an old battery should be taken apart, cleaned thoroughly of any dirt or rust, and the inner surface should be greased. If you require a heater with more power, set up a welded framework made of prepared pipes, arranging the larger diameter pipes horizontally.

Bridges between the larger pipes are made of smaller diameter pipes. They will have the coolant circulating through them. Keep in mind that a hole needs to be left in the lower branch pipe so that the heating element can be installed. In the event that there are multiple heating elements, they are spaced apart and shouldn’t come into contact with one another. The pump is also given a hole. Fasten the heating element firmly with bolts. Autogenous hammers or a bolt cutter can be used to drill the hole for the heating element.

Use a pump if you are unable to achieve a natural coolant circulation in a room because the heater you installed on your own is large. It is situated at the equipment’s base. The pump and the heating element shouldn’t come into contact.

The equipment is examined for tightness following the installation of the structural components. The coolant is poured in if the outcome is satisfactory. With a plug, the drain hole is tightly sealed. The apparatus is linked in parallel to the electrical grid. An additional component of the scheme is a bimetallic thermostat made from a regular iron. Ground the installation prior to the initial start-up. DIY oil heaters for the house: The following installation guidelines and their device will be thoroughly explained in the video:

Advantages of homemade heaters

One clear advantage over factory equivalents is the homemade heating devices for the house and dacha heaters made by hand. Since the first are made with improvised tools, they are inexpensive. However, homemade equipment must adhere strictly to the guidelines for the safe use of gas and electrical appliances. Independent production of infrared heaters, which are thought to be the most efficient and affordable, is now feasible. You can create an oil radiator at home if you require a device with more power. There are plans for building portable stoves for tents and home convectors.

(Rate this post and click the first one.)

Remarkable regarding the subject:

• 
  The process of making tiles for stoves by hand.
• 
  Features of the refusal of central heating.
• 
  Preparing the system for the heating season
• 
  Steel heating pipes

How to make an oil heater yourself?

It’s a good idea to familiarize yourself with the concepts underlying the operation of an oil heater and know what the industrial version is before creating one yourself. What systems and procedures are concealed within this device’s casing?

The oil heater’s basic design consists of the following:

• TEN (one or several);
• oil;
• control and automation devices.

The heating element heats the oil surrounding it, which causes the convection movement of flows to start in the volume. This is how the system operates. As a result, the liquid circulates, uniformly redistributing heat inside the sealed metal housing. This process causes the latter to release heat into the surrounding area through its surfaces.

To ensure smooth power adjustment, a rheostat is typically included in the heating element’s power supply circuit. Alternatively, discrete switches could be included with the product. Thermostats and occasionally tilt sensors are the most common automation devices. Advanced models also include additional features like a remote control panel, digital control panel with indicator panel and programmer, etc.

Floor standing oil heater placement is the most common type. Frequently, the frame has wheels to increase the mobility of its massive structure. It can also be mounted on the wall; certain models come with floor stands, brackets, and other suitable mounting components for this purpose.

One creative solution is the newly developed skirting variant, a type of wall-mounted that is meant to be used in bathrooms and other spaces where there isn’t enough room to install a standard oil appliance. Its name, "narrow and long," reflects its design.

Diagram for an inexpensive oil heater

It should be noted that certain design elements must be closely followed in order for the heater created by hand to have the same benefits as the industrial prototype:

• Durable and hermetic housing, resistant to mechanical influences, completely eliminating the leakage of liquid;
• Using oil as a filler. It acts as an intermediary between the heating element, which is heated up to several hundred degrees Celsius, and the surfaces of the casing. This protects the heating element from corrosion, scale, self-ignition and combustion. And, in the end, taking into account the considerable internal volume, provides a fire-safe surface temperature of the body (a few tens of degrees);
• The substantial inertia of the processes occurring in the product, supplemented by the operation of the thermostat, ensures efficient utilization of the oil device and added energy savings.

It’s still to be discovered how to create such a heater by hand.

Selection of materials

As the above makes evident, you will need to obtain the following parts somewhere in order to create a homemade heater:

• housing;
• oil;
• TENS;
• mobile stand
• control and automation devices.

As a housing, you can use an old sheet or sectional radiator from the central heating system. An automobile or other comparable device whose design permits the liquid to circulate inside in a natural or artificial manner (with the aid of an electric motor) would be a perfect fit. You can also use your hands to create a closed loop out of steel pipes.

The most important thing to remember is that making sure the housing is tight will be a necessary requirement for the system to operate normally. It is unlikely that a homemade device like this will cause more problems than benefits in the event that the liquid leaks.

First, in terms of oil, the quantity should be determined using the formula below.

85 percent of the casing’s volume. Air fills the remaining space in the cavity. This 15% area is retained to make sure that the oil does not crush the housing during operation as a result of thermal expansion.

Second, the fluid’s qualitative attributes need to satisfy the requirements for thermal stability and purity at the very least. Scale buildup from dirt and impurities will reduce the heating element’s lifespan. Additionally, choosing the right grade of technical oil is necessary when the heating element is at a respectable temperature. Transformer-based technology is one example of a good choice.

The number and features of the heating elements are chosen based on the heater’s required power (while also considering the housing’s overall dimensions). Conditionally, it can be said that normal ceiling height is necessary in order to create a comfortable atmosphere in a room.

1 kW for every 10 kV м. Rooms with high ceilings, inadequate insulation, cold climates, etc., call for products that are several times more potent.

Naturally, you should also consider the power supply network’s potential in the location where you intend to use the handcrafted device. It’s crucial to think about potential metal combinations for the housing and heating element when assessing durability. For instance, using heaters with magnesium anode is not advised. Mix copper with aluminum and regular steel (not stainless steel).

The heating element is installed within the heater body.

If the mobile platform with wheels is going to be a part of the homemade device, it needs to be able to bear the weight that will be placed on it because the design will probably have a significant mass. For instance, rolled steel can be used to make angles, channels, and other materials.

The total power load of the appliance should be taken into consideration when choosing switches or rheostats.

A bimetal plate (taken, for example, from an old iron) should be used as a thermostat. In addition to energy efficiency, you should take into account the possibility of an excessive rise in pressure within the enclosure if you choose the appliance’s ideal temperature setting.

An added layer of security can be achieved by including a thermal fuse. or a comparable switch that runs under a specific pressure.

Assembly with your own hands

Thus, all of the starting materials are ready. You will also require some locksmith supplies and equipment, which are easily obtained. You could, for instance, borrow a neighbor’s welding machine from their garage if you don’t have one (you’re not going to assemble and test the product in your apartment, are you?).

Design for a do-it-yourself heater

As assembly by hand will primarily take place on location, the following specific details only need to be considered:

• for better oil circulation, the heating elements are placed at the bottom and on the sides, they should not be in contact with each other and with the body;
• If the shape and volume of the body does not provide sufficiently natural convection of liquid, you should resort to equipping the structure with a pump and electric drive;
• For emergency oil drainage and pressure relief it is recommended to provide appropriate holes with valves;
• the housing must be grounded;
• Before using it, it is recommended to thoroughly test the device for operability.

As you can see, building an oil heater yourself is not that difficult. In bad weather, it will respond to you with all of its warmth if you take great care in its design and production. If the device’s assembly seems too difficult, you can always select an oil radiator from the store.

We go into the advantages of an oil heater that you can construct yourself in our guide on heating and insulating your house. In light of growing energy expenses and growing environmental consciousness, DIY oil heaters present an economical and sustainable alternative. Repurpose common materials and follow easy instructions to build a heater that reduces carbon emissions and warms your space efficiently. Anyone with a little perseverance can complete this do-it-yourself project, which involves anything from basic plumbing fittings to salvaged metal drums. Building your own oil heater can be a gratifying and useful project, whether you’re looking to upgrade your current heating system or find a different way to live off the grid.

Heater with their own hands: the technology of assembling the simplest and most effective designs

Stunning designs are a defining characteristic of contemporary heaters made by both domestic and international industries.

But if you need to heat something, like a garage in the winter or a summer house in bad weather, is it really worth spending money on such beauty?

You can also utilize a homemade gadget in such a modest setting, and despite its simplicity, it will do the job just fine.

Especially considering that owing to its straightforward design, creating a heater with your hands is not difficult. Let’s familiarize ourselves with a few types of these gadgets and discover how and what you can use to create a heater at home using only your hands.

Types of heaters

If your home handyman would like a homemade "warming," you can provide him with a few options to choose from:

It is an oil-filled container with a tubular electric heater (TEN) attached.

A coil composed of nichrome or another material with high electrical resistance serves as the heating element’s main component and heats up when an electric current is run through it. The coil is inserted into a sand-filled copper tube.

In addition to removing heat from the heating element and dispersing it across the housing’s surface, the oil acts as a heat accumulator, allowing the device to keep heating the surrounding air for a while even in the event of a power outage.

Vapor drip

The vapor-drop heater shares many structural similarities with the oil heater; the only difference is that water vapor is employed as the heat-distribution medium. It is created by pouring a tiny quantity of water into the housing.

A solution like this has two major benefits:

1. When freezing, the vapor-drop heater will not burst, since water occupies only a small part of its volume.
2. Steam is an extremely high-capacity heat accumulator. More precisely, it is not so much steam as the process of evaporation: it is during the transition from liquid to gaseous state that water accumulates a large amount of heat energy, which is returned when the steam condenses on the walls of the heater.

Condensed vapor flows to the lower section of the device, where the heating element is located, after providing heat to the device’s body. The water volume and heating element power are chosen so as to prevent the heater from rupturing due to steam pressure.

Owing to its hermetically sealed body, the device’s internal walls resist rusting caused by high humidity levels.

As is well known, the candle’s flame releases some heat in addition to light.

The only way it typically escapes is through convective air flows that "smeared" throughout the entire space of the room beneath the ceiling.

How about placing a heat-absorbing "trap" over the candle? We’ll explain what it is in the next section.

Infrared (IR)

When a material has a temperature lower than absolute zero, it releases "thermal" electromagnetic waves, also known as infrared waves.

The temperature of the material directly affects how intense this radiation is. Due to their relatively cold surfaces, water and oil radiators also disperse infrared radiation, albeit very little of it.

It only takes heat to the point of red glow for a metal object to become an infrared emitter. Even at relatively low temperatures, noticeable "heat" waves can be produced with the use of special materials like graphite.

Understanding these nuances will enable us to create our own infrared heater, which will provide heat directly—that is, without the use of air as a medium.

Other types

Given that not all places have access to electricity, people have a right to designs that run on gas or solid fuel. Birzhuyki can be attributed to the latter.

Requirements for the heating device

When designing a heater of this or that kind, we will follow these guidelines:

1. The device must be absolutely safe.
2. The design should be simple enough that it can be assembled with your own hands.
3. We will use only such parts and materials that can be obtained without the slightest difficulty.

The entire cost of the DIY heater should not exceed thirty percent of the price of a heater of the same kind and capacity that is manufactured in a factory. If not, the act of creating the device with your hands becomes meaningless.

Assembly of the heater

How are do-it-yourself space heaters put together? Let’s examine the technology used to produce the aforementioned kinds of heaters one by one:

Oil heater

Now let’s look at how to construct an oil heater by hand. The simplest way to create such a heater is to use a water heating radiator, as they already have threaded holes pre-made. It is necessary to weld the radiator to a steel angle frame with "skis" or legs so that it can be placed vertically.

One can purchase the heating element from a store. There must be a temperature regulator on it.

Converting a radiator into an oil heater

It is improbable that the threads in the radiator and the heating element will line up. The latter requires the creation of an adapter in the shape of a bushing with threads cut both inside and outside in order to be installed. The inner one should match the thread of the heating element, and the outer one should match the thread of the radiator.

It is necessary to wind a sealing material around the adapter’s external threads before screwing it into the radiator. The best tape for this purpose is fluoroplastic tape, also referred to as FUM-tape because of its ability to withstand extremely high temperatures.

Two heaters can be added to the homemade oil heater if needed. They must be connected in parallel in this instance.

Convection causes heated oil to rise, so the heating components must be at the bottom of the apparatus.

Vapor-drop heater with your own hands

This kind of heater is put together similarly to an oil heater. Aside from a couple of variations:

• TEN should be low-powered;
• the casing must be stainless steel, otherwise the homemade vapor-drop heater will not last long;
• Instead of transformer oil, a small amount of water should be poured in.

Using stainless steel pipes, you can weld the casing into the shape of a tubular radiator on your own.

Install a safety valve on the casing to prevent steam from bursts in the casing.

A series of nested ceramic flower pots in varying sizes serves as a "trap" for heat and should be placed over the candle. Three pieces, sized at 15, 10, and 5 centimeters, for instance, will suffice. The pots are arranged inverted.

A stud (threaded rod) with a diameter of 6 to 12 mm, 8 nuts, and roughly 20 washers are needed to assemble the "trap."

The following actions are required:

1. The nut is screwed onto the stud on one side, and the largest pot is put on the other side, so that the bottom of the pot stands on the screwed nut. To avoid having to drill the bottoms of the pots, it is advisable to buy products with ready-made holes.
2. The put on pot should be fixed with a nut from inside and then a second pot is inserted into it.
3. The third pot is installed in the same way, after which a core made of the remaining nuts and washers is assembled inside it on a stud.

DIY candle warmer

The most straightforward option is to use bricks as the structure’s support. A stand with metal profile welding will appear a bit more refined.

Depending on the size of the candle, a candle heater’s power can range from 15 to 42 watts. The ceramic absorbs the trapped heat and begins to radiate infrared waves as it warms up.

In the event that the usual 220 volt voltage is unavailable, how can a room be heated? With their own hands, they can operate a 12-volt heater—a true lifesaver in this circumstance. The website considers three different ways to make the device.

Click this link to learn more about the benefits and drawbacks of gas heaters for garages.

The cost-effectiveness of a heater is crucial when selecting one. Visit http://microklimat.pro/otopitelnoe-oborudovanie/obogrevateli/dlya-doma-energosberegayushie for more information. Let’s examine several heater types and how energy-efficient they are.

IR-heater

Building an alleged infrared film heater is the simplest DIY project. Follow these steps:

1. Prepare a mixture of epoxy glue and graphite powder. The best source of graphite is used brushes of current collectors of electric transport – trolleybus or streetcar. The basis of the mixture should be graphite, glue is used only as a binder.
2. Next, you need to take a sheet of laminated paper plastic with an area of about 1 square meter. m and apply the prepared mixture to it (on the side with the highest roughness) in the form of a long strip, winding in a "snake" pattern.
3. On top of the "snake" you need to glue another sheet of plastic, seizing it for reliability with the same epoxy glue.
4. On different sides of the graphite "snake" it is necessary to connect wire strands with a plug at the end by means of terminals. If desired, you can include some primitive thermoregulator in the circuit.
5. To make the homemade IR film heater more convenient to use, it, like a picture, should be fixed on a wooden frame.

Putting the infrared heater together

Make sure to measure the graphite emitter’s resistance and figure out the circuit’s total current before turning it on. It ought to line up with the electrical wiring’s potential.

gas heater with your own hands

This device will use infrared radiation along with convection to heat the space.

What is required to make it is as follows:

• gas burner and valve;
• household sieve of hemispherical shape;
• a sheet of galvanized steel;
• steel mesh.

The following plan is followed in the creation of the device:

1. From a sheet of galvanized steel, cut out two pieces of galvanized steel with metal scissors, which have the shape of a circle (diameter should correspond to the diameter of a household sieve) with "ears".
2. A gas burner must be bolted to one of the blanks from one side. Next, you need to bend the "ears" of this blank to the opposite side of the burner and screw a hemispherical sieve to them so that the burner is inside it. The sieve plays the same role as a "trap" for heat in a candle heater.
3. Now you need to take a metal mesh and attach it in the form of a cylinder to the same "ears", so that the sieve with a burner is inside it. Rivets should be used as fasteners. Now the grid with a round blank attached to it resembles a pot with a burner and a hemispherical sieve covering it.
4. Cover the "pot" with the second blank by bending its "ears" upwards. To these "ears" rivet the upper part of the grid cylinder.

The heater is prepared. The hose from the gas supply line to the burner still needs to be connected.

There are intermittent problems with the heating system, and you don’t have a heater? You can easily make a candle heater by hand without spending a lot of money.

This topic will teach you what subtleties to consider when selecting a ceramic heater.

Heating your house with an oil heater that you made yourself can be a rewarding and economical choice. You can build a heating system that suits your needs and preferences by recycling materials and using simple tools.

The flexibility that comes with constructing your own oil heater is one of its key benefits. With the flexibility to customize the heater to your space’s dimensions and configuration, you can guarantee effective heating without wasting energy. Furthermore, DIY oil heaters can be made to match your interior design perfectly, giving your heating solution a unique flair.

In addition, building your own oil heater can save a lot of money in comparison to buying a pre-built unit. You can cut costs while maintaining efficient home heating by using locally sourced materials or repurposing existing items. Because of this, DIY oil heaters are a sensible choice for homeowners on a tight budget.

Additionally, building an oil heater yourself offers a priceless chance to pick up new abilities and broaden your knowledge of heating systems. From putting together parts to resolving possible problems, the procedure provides practical experience that can be enlightening and empowering. Building your own oil heater can be a satisfying project, regardless of your level of experience with do-it-yourself projects.

To sum up, building an oil heater yourself has a lot of advantages, such as personal development, financial savings, and customization. By starting this do-it-yourself project, you can not only provide your house with an effective heating solution but also acquire useful skills and knowledge in the process.

Video on the topic

5 reasons NOT to buy an oil heater

#Marquise for 2500 rubles. with your own hands

With his own hands, the radiator is changed consumes up to 200 watts / hour

Oil radiator with your own hands

Oil radiator with your own hands. Digital thermostat. All defenses