Kermi convectors: overview of popular models and installation recommendations

Maintaining a comfortable living space and cutting down on energy expenses require making sure your home is well-insulated and heated. Using Kermi convectors, which provide effective and efficient heat distribution throughout your space, is one common heating solution. In this post, we’ll examine in more detail a few of the widely used Kermi convector models that are on the market and offer installation tips.

The high-performance heating capabilities and inventive design of Kermi convectors are well-known. The natural convection currents produced by the temperature differential between the window surface and the room are utilized by these heating units, which are frequently placed beneath windows, to distribute warm air throughout the area. This guarantees uniform heating throughout the space and also helps to get rid of cold spots close to the windows.

The adaptability of Kermi convectors is one of their main advantages. To accommodate varied aesthetic tastes and heating needs, they are available in a variety of sizes and styles. There’s a Kermi convector to suit your needs, whether you’re going for a more traditional or sleek and modern style.

To maximize the efficiency of Kermi convectors during installation, correct placement and setup are crucial. By placing them under windows, heat loss through the glass is reduced and effective heat distribution is made possible. For best results, it’s also essential to make sure the convectors are installed in accordance with manufacturer guidelines and are the right size for the space.

We will examine some of the widely used Kermi convector models in greater detail, emphasizing their advantages and features, in the sections that follow. Additionally, we’ll offer detailed installation guidelines so you can maximize the performance of your Kermi convector heating system.

Kermi Convector Model	Installation Recommendations
Kermi FKV	Mount on the wall, ensure proper clearance from furniture and curtains.
Kermi Plan-K	Best suited for under-window installation, connect to the central heating system.
Kermi Therm-X2	Fit beneath windows for efficient heat distribution, ensure proper ventilation around the unit.

About Kermi brand

For nearly 60 years, heating equipment under the Kermi brand has been produced in Germany. The business is a part of Arbonia, the massive European climate group.

Products from Kermi are unique:

• high quality performance;
• thoughtfulness of solutions;
• stylish design;
• functionality;
• reliability.

The end user and his comfort level are the focus of the company’s efforts. Modern technology and skilled labor are used in the production.

Types of convectors brand Kermi

There are two primary varieties of convection water heaters made by Kermi: floor standing and built-in. Designs that are not conventional belong to a unique group.

A common operating principle unites all devices. The heat exchanger component receives the heated water from the heating system. Heat is transferred to the air by heated metal. As warm air rises, cold air masses take their place.

The room volume heats up quickly thanks to the convection process.

Steel floor

Wide windows have floor-type heaters installed next to them. They form a barrier against the entry of cold air into the space by producing a stream of thermal radiation.

Inside the galvanized steel casing is the heat exchanger. The apparatus is made up of fin-equipped metal tubes.

Spigots are used to connect the appliance to the pipes of the heating system. Kermi floor convectors can be connected from the side or the bottom.

Recessed in the floor

The flush floor location of concealed installation convectors is one of their distinguishing features. The floor covering has a recess made for this reason. The housing of the unit’s operational equipment is accommodated by the recess. There is a decorative grille covering the device’s top.

Either forced or natural convection can be used by devices. In the second scenario, the air mixing process is sped up by adding a fan to the setup.

Convectors that are recessed The air is uniformly warmed by Kermi throughout the room’s height. There are no drafts, and there is no buildup of cold air beneath the gadget.

Special designs

Convectors with unique shapes are made to order for rooms with non-standard configurations.

• Corner (for location at the junction of walls);
• radius (for rounded shapes);
• complex shape (with several bends, with a recess for a column).

Convection devices of unique designs can only be ordered after the required measurements and computations have been completed beforehand.

We examine well-known models and provide installation advice in our guide to Kermi convectors, which will improve the insulation and heating in your house. Because of their reputation for efficiency and stylish appearance, Kermi convectors are a great option for homeowners trying to maximize their heating systems. We dissect these well-known models’ features, emphasizing their energy-saving and performance aspects. Furthermore, we offer doable installation advice to guarantee you maximize the performance of your Kermi convectors. Our overview will assist you in making decisions that will result in a warmer and more energy-efficient home, whether you’re installing new units or upgrading your current heating system.

Selection criteria

The kind of heater selected depends on interior requirements and personal preferences. Floor versions work well in spaces with tall windows. Recessed models are used when it’s imperative to hide convectors.

In damp areas like kitchens or swimming pools, heaters should be ordered in a galvanized waterproof model.

It is possible to apply an extra antibacterial layer to the heater’s exterior surfaces in buildings with strict hygiene regulations. Kermi The development of pathogens is inhibited by sanitary coating. Appropriate for use in therapy rooms and hospitals.

When purchasing a convector, the heat output must be determined in addition to the type and design of the device. A building that is 10 square meters in size is thought to require an average of 1 kW of heat.

The technical documentation provided by the manufacturer can provide information on a specific model’s heat output.

The heater’s length is chosen based on how long the glass opening is. This placement technique produces a screen that completely shields the window from drafts caused by the cold.

Prices for the model range of convectors Kermi

convectors Kermi

Review of prices of convectors of different types

Kermi convectors can be naturally integrated into any architectural concept thanks to their wide range of sizes and variations.

KNN/KNV

The most basic type of floor heater. The device’s heat exchanger is a rectangular tube with fins constructed of steel. The same metal is used to make the powder-painted casing. Snow-white is the base color.

The KNN series is connected on the side. KNV valve versions come with a connection unit that is located below.

• working pressure, atm: 6;
• maximum temperature, °C: 110;
• heat output, W: 175-14 370;
• heating area, m²: 2-145;
• height, mm: 70-280;
• length, m: 0.5-6;
• width, mm: 72-255.

Convector Kermi KNV is available for purchase for 10 080 rubles.

KSN/KSV

Kermi series floor convectors, featuring a heat shield on the rear wall. By preventing energy loss through windows, the gadget increases the amount of heat in the space.

KSN models are connected at the bottom. A built-in valve group allows for supply from below in KSV convectors.

• working pressure, atm: 6;
• water temperature, °C: up to 110;
• heat output, W: 229-17 220;
• heating area, m²: 3-175;
• height, mm: 70-280;
• length, m: 0,5-6;
• width, mm: 133-316.

Devices from the Kermi series KSN/KSV are priced starting at 19,800 rubles.

KKV/KKN

Kermi small heater line. A heat exchanger made of copper and aluminum defines the design. lightweight and simple to set up. The bottom supply of the model KKV has a thermostatic valve.

• working pressure, atm: 10;
• maximum temperature, °C: 110;
• heat output, W: 199-7,179;
• heating area, sq. m. м.: 2-72;
• height, mm: 100-250;
• length, m: 0.6-3;
• width, mm: 100-260.

The KKV/KKN models are priced starting at 16,900 rubles.

KVN/KVQ

Recessed floor unit series. While KVQ relies on forced convection, Model KVN operates on the principle of natural convection.

Gray galvanized sheet steel is used to make the casing. An aluminum and copper heat exchanger is attached to the heating pipes via a Euro cone threaded connection. There is a valve on the apparatus to release air. An additional feature of KVQ models is a tangential fan that runs on a 220 V mains supply. Forced-air ventilation convectors produce more heat than naturally operating convectors.

An aluminum longitudinal grille is included with the basic set; additional variations and colors are available upon request.

• heating medium temperature, °C: up to 130;
• working pressure, bar: 16;
• performance, W: 176-6,467;
• heated area, m²: 2-65;
• depth, mm: 75-200;
• length, m: 0,75-3;
• width, mm: 180-360.

Price range: 12,580-97,580 RUB (including grille).

Ascotherm eco in-floor convectors

Energy-efficient EC motors are featured in the Ascotherm eco line’s advanced in-floor models. When compared to the conventional version, the part can save up to 72% of current consumption. used in heating systems with low temperatures.

Molded steel that has been galvanized makes up the box. The casing’s components are all powder-painted. The standard hue is gray anthracite.

• pressure, bar: up to 10;
• coolant temperature, °C: 90-110;
• power, W: 141-13 350;
• heating area, m²: 2-133;
• depth, mm: 185-400;
• length, m: 1-5;
• width, mm: 92-200.

KRN91

Natural convection Ascotherm eco in-floor units, basic series. There are movable feet on the casing. It features an aluminum and copper heat exchanger that is detachable. The section has soundproofing. A grille made of anodized aluminum is part of the basic set. Because of its rubber stops, walking makes less noise.

Model KRN91 costs 21 530-171 380 rubles.

KRN92

The model is different from the earlier range because it has an extra spigot for connecting to ventilation. A dedicated channel runs the whole length of the heat exchanger, providing supply air. Warm air masses from outside enter the space. An unique flap controls air flow.

You can purchase a convector Kermi KRN92 for 29,080-199,500 rubles.

KRN81

A group of products using forced convection. The gadgets have a diametral fan that is covered for protection. A thermo-ventilator that is integrated controls the power level.

The cost of the KRN81 models is 59 714-242 640 rubles.

KC281/KC481

Variety of convection air conditioners and heaters. Two-pipe heating systems use model KC281, while four-pipe systems use model KC481.

The heat exchanger’s entire length has a fan as part of its design. A roll grille is included in the kit. The models come with a tray to catch condensation.

Convection is the basis for cooling, but it happens in reverse. Via the glass, warm air heated by the sun’s rays enters the heat exchanger. It cools as it travels through the plate pipes. During the warm season, the air-conditioning effect can be utilized.

KC models cost between 82,510 and 194,320 rubles.

Installation recommendations

The manufacturer’s warranty obligations are upheld if a specialized organization installs the Kermi heating devices. You run the risk of having your warranty revoked if you install it yourself.

Only closed heating systems are suitable for installing Kermi convectors.

It is essential to take the products out of their packaging and make sure they are complete before beginning the installation.

Norms fundamental to in-floor model installation:

1. The niche in the floor must be suitable for the convector"s dimensions. It is necessary to leave an expansion gap of a couple of centimeters. It is needed so that the floor does not deform the body of the unit when it expands.
2. The bottom and walls of the pit are covered with waterproofing and soundproofing.
3. The box is leveled in the niche with the help of alignment feet and fastened with metal mounting angles.
4. Electrical wiring laid in a protective sleeve.
5. Heating pipes are connected from a convenient side using threaded connections.
6. When pouring the floor, unused holes are covered with plugs to prevent the mortar from leaking into the unit.
7. The decorative grille is installed last.

Floor model installation is different in that a recess does not need to be prepared. The floor is fixed with the appliances. The floor covering has to be ready to go when it is installed.

The convector is fastened and installed in accordance with the level. Pipes are connected using the connection type that was chosen. In case the room has multiple devices, they are arranged in a single row. There is a 5 centimeter minimum gap from the wall. See our website to learn about wood stoves for long-burning homes.

Kermi convectors provide a wide range of choices for effectively heating and insulating your house. These convectors combine sleek design and cutting-edge technology to offer comfort and style. Kermi offers a variety of models to choose from, including wall-mounted and floor-standing options.

Energy efficiency is one of the main benefits of Kermi convectors. These units ensure optimal warmth without using excessive amounts of energy by distributing heat throughout the room in an even manner by utilizing the principles of convection and radiation. You will ultimately save money on heating bills in addition to lessening your carbon footprint.

Convenience in installation is a key consideration in the design of Kermi convectors. Both professional installers and do-it-yourself enthusiasts can use them because of their lightweight design and simple installation instructions. Additionally, you can effortlessly incorporate Kermi convectors into any home heating system thanks to options for both new construction and retrofitting.

To sum up, Kermi convectors are a dependable and effective option for insulation and heating your house. These units provide a workable solution for keeping a cozy interior climate all year round thanks to their contemporary design, energy-saving features, and simple installation procedure. Kermi convectors are an excellent option for both new construction and renovation projects because of their high caliber construction and functionality.

Video on the topic

Comparison of in-floor convectors Techno, Kermi, Spl, Novaterm. Video overview and comparison.

Steel panel radiators heating Kermi: review of models, advantages

Review and feedback on Kermi Therm X2 radiators after 7 years of use

Comparison of in-floor convectors / Ruskhit