Keber gas boilers features, faults and reviews

A dependable heating system is crucial for keeping our homes toasty and comfortable throughout the winter. Gas boilers are particularly noteworthy among the available options due to their high efficiency and effectiveness in producing heat. Keber gas boilers in particular have become more well-known due to their exceptional functionality and features. Let’s examine what makes Keber gas boilers unique, look out for common issues, and learn from user feedback.

Keber gas boilers are well known for their cutting-edge design and economical energy use. Natural gas is a fuel source for these boilers that is not only affordable but also produces fewer emissions than other fossil fuels. Keber boilers stand out for their high efficiency, which allows them to efficiently turn a sizable amount of fuel into heat and cut down on energy waste and utility costs.

Keber gas boilers are made with cutting-edge technology, but like any mechanical system, they can break down over time. Leaks, malfunctioning thermostats, and ignition problems are common problems. Even though these issues can be annoying, they are frequently fixable with routine upkeep and prompt repairs. Homeowners can guarantee continuous heating during the winter months by being aware of these possible problems and taking prompt action to address them.

User reviews are a great resource for homeowners thinking about getting a Keber gas boiler. Speaking with people who have used these boilers directly can offer insightful information about their overall satisfaction, performance, and dependability. Reviews from users frequently draw attention to particular qualities that they value, like durability, temperature control options, and ease of installation. Reviews may also highlight any persistent problems or disadvantages, which aids potential customers in making wise choices.

Main error codes

е0

Error E0: The room temperature sensor isn’t working properly. Gas does not ignite evenly. Verifying that there is gas in the system and that the gas valve is not closed is essential. Additionally, confirm that the main line or cylinder is filled with gas.

е1

No water in the heating system is error e1. There is not enough water in the system. Verify that the cold water system is not broken, examine the filters, and clean or replace them as needed.

е3

Boiling water in the boiler as a result of overheating is error e3. The heating system’s water circulation isn’t uniform. It is essential to verify that the shut-off valves are sufficiently open and that the filter is not clogged.

е4

The chimney is blocked, error e4. Combustion products are not expelled outside. It is essential to inspect the connections of the smoke exhaust system and, if required, clean the pipe or contact a professional.

е5

Error e5: The burner flame does not match the standard. Automation fails to sufficiently flare up or fails to "see" the flame. Checking the flame control sensor, adjusting the burner flame, or calling a professional are required.

е6

Gas leakage is error e6. There is a gas leak in the system. Turn off the boiler right away, then try to locate and fix the leak on your own—or call in a technician.

е7

The thermostat and control panel are not communicating, which is error e7. The cables that connect the thermostat to the control panel may be broken or have a bad contact. Examine the cable connection between the thermostat and the remote control, and fix any issues found.

е8

The water temperature sensor is broken, causing error e8. Information provided by the water heating temperature control sensor is distorted. Examine the problematic component and, if needed, replace it.

its

Its fault is that the fan is broken. The fan is filthy or malfunctioning. If the fan’s voltage supply fails, check it and replace it. Additionally, it needs to be cleaned if needed and examined for contamination.

ef

Error ef: The water is not turned off by the flow switch for more than 1.5 hours. After a prolonged period of inactivity, the automation detected it and produced a message. Examine the switch, clean it, and replace it if needed.

ea

Error ea: More than five times per minute is the water refill signal. When too much activity is detected, the automation alerts users to a potential problem. To ensure proper operation, check the water pressure in the water pipe, the filters, and the supply circuit.

The water supply’s filter

U0

Restarting the boiler is error U0 (uo). When a fault signal appears, the boiler attempts to restart itself; this can be fixed by the user or after a predetermined amount of time.

Repair of wall-mounted and turbo units

Open and closed combustion chamber wall-mounted gas boilers are more sophisticated appliances with contemporary electronics and safety features. However, you can still solve some of these issues on your own. Wall-mounted atmospheric heat generators are equally susceptible to the draught, fuel supply, and sensor checks discussed above.

The product’s instruction manual and a Phillips screwdriver are the only tools you’ll probably need to identify problems with the wall-mounted gas boiler. The data sheet provides a list of the fault codes displayed on the heater display. The front panel must be removed with a screwdriver.

The heater is in one of three non-operational states:

1. The boiler is switched off completely, no indicator light is on.
2. The unit is switched on, the display and mains indicator are on, but the automatic ignition does not take place.
3. There are attempts to start the main burner, but after ignition it immediately goes out.

Advice: Make sure the wall-mounted boiler is powered on whenever it stops working entirely and is connected to the mains supply of the home. One possibility is that the switchboard’s tripped circuit breaker is the root of the issue. Second moment: nearly all imported units are phase-sensitive, and reversing the plug in the socket to reverse the positions of the contacts frequently fixes the problem.

The boiler’s electronic board contains the fuse block.

Now that we have confirmed the heater’s energized state, we can address condition #1. To accomplish this, tilt the front cover (depending on the model) or use a screwdriver or star wrench to unscrew and remove the gas boiler’s front panel. The following is the algorithm:

1. Find the fuse block and check each of them with a multimeter or visually. You will probably find one that is burned out.
2. The spare fuse is usually glued from the inside to the front panel. Replace the burnt-out one or buy a new one (of exactly the same rating)!).
3. Try to start the heating unit. If it works, then the repair is over, put the cover back in place.
4. The appliance turned on and "died" again? The only thing left to do is to call a master, because the problem is more serious.

Advice: After prying open the panel, thoroughly examine every component of the heat generator to check for blown parts on the board, broken or detached wires, and leaking joints. In the event that the latter is found, contact a specialist right away. Our expert Vladimir Sukhorukov will explain more in his video about the wall-mounted gas boiler’s troubleshooting algorithm:

The display indicates an error code in the other two non-functional states; using this code, you can find the fault by consulting the product data sheet. The specialist suggests doing the following: You should contact the service provider if the documentation opposite the error code indicates to do so because you are unable to handle the breakdown on your own. You can get rid of these mistakes by yourself:

1. The strainer that filters the coolant from the heating system is clogged. Disconnect the heat generator from the house power supply, turn off the taps and clean the element grid.
2. The built-in circulation pump does not work. Reasons – rotor jamming or air blockage. In both cases, unscrew the large screw (in the center of the pump) and bleed the air or turn the rotor with a screwdriver. Proceed carefully, a little water will leak out of the hole.
3. When the boiler pressure gauge shows low pressure, and there are no leaks in the heating system, you need to pump air into the expansion tank, mounted inside the heating unit. The pressure on the air side of the diaphragm should be lower by 0.2 Bar than in the system. More information about pumping the tank .
4. If a leak is detected at low pressure, it must be repaired and then water added to the system.

Note: If the room thermostat’s electrical circuit or the gas boiler’s own thermostat is damaged, the display won’t indicate a problem. Additional details are provided by our expert in the second segment of the video:

Some recommendations of experts on care

The primary warning from experts is that only experts should install and repair these kinds of boilers.

Operational errors will cause the mechanism to fail or lose performance very quickly. This care does not pose any unique challenges in relation to other matters.

It’s possible that the Ferroli article on gas boilers will catch your attention.

You can read this article to learn how to choose an electric boiler for your home.

Many issues can be resolved on their own by simply understanding how the messages are labeled on the display. Things to keep in mind when setting up such apparatus:

1. The dimensions of the coaxial flue duct meet the European standards, which simplifies the installation process.
2. The chimney outlet should be equipped with rubber hatches. It should also have special knots on it, preventing condensate formation.
3. The boiler is equipped with a flow sensor, when the pressure in the network drops, the heating device stops working and stops feeding fuel to the burner.
4. For heating a residential house up to 200 sq. m.m, it is necessary to install a large fuel tank (at least 5 m3) for the boiler. Accordingly, a lot of space will be needed.

We can infer that the Hydrosta boilers are on par with those made by German manufacturers based on our monitoring of customer reviews. These devices were just introduced, and it hasn’t been determined in practice whether they will endure the 20 years that the manufacturer claims.

Customer reviews attest to the fact that they frequently encountered problems when trying to purchase replacement parts. However, this boiler becomes a great substitute for German equivalents if a service center is located close by.

Watch the video below for a summary of the Hydrosta boilers:

Mounted boilers

Technical details of the units that are mounted on the wall:

1. The heat carrier is fully protected from freezing.
2. The wall-mounted version has a multi-level type of security system.
3. Hermetic construction of the firebox.
4. Hot water circuit. Equipped with two separate heat exchangers. They increase the productivity of the device.

It’s important to know that the wall-mounted device can be installed quickly thanks to its excellent production settings. It is not necessary to perform other challenging tasks like burner adjustments.

Greater amounts of heat are obtained by heating the outgoing gas.

Common problems and reasons for repair

As was already mentioned, minor as well as major malfunctions should be fixed right away.

Let’s examine the causes of the impending repairs in more detail. These could be the following, which will demonstrate the need for adjustment work:

• too weak gas flame;
• rapid wear and tear of parts;
• high noise of the unit;
• rapidly falling water temperature in the circuit;
• rapid extinguishing of the fire after starting the boiler;
• too cold water;
• gas pops during combustion;
• in the heating system gets insufficiently heated coolant:
• the boiler blows out;
• the device does not turn on at all.

Additionally, the control and protection components may malfunction or sustain damage.

Boiler goes out in hot weather troubleshooting

Seldom does a situation arise where the summertime gas boiler starts to fail. Cause: there isn’t enough draught for the burner to run. Since the draught is more severe during the warm season, many experts advise against turning on the boiler constantly during this time of year. Instead, they advise doing so occasionally, like when you need hot water. There are issues with the equipment’s performance during the night because the chimney cools down and its internal temperature drops below that of the street.

It’s essential to insulate and warm up the chimney in order to fix the issue. However, there’s more: warm weather causes equipment to malfunction. A malfunctioning draught sensor could be the cause of the equipment’s summertime shutdowns. It might function properly in the winter. In this instance, the boiler needs to be replaced entirely; repairs are pointless.

Preventive inspections and appropriate maintenance are necessary for any equipment. This minimizes the likelihood of malfunctions and breakdowns. On the other hand, an urgent inspection, preventive measure, or repair is necessary if the gas boiler starts operating improperly, its burner consistently goes out, or there is soot when turning on.

Varieties of gas boilers for homes

How to install a gas boiler

How can the installed gas boiler be turned on?

It’s critical to comprehend the subtleties of Keber gas boilers when it comes to home insulation and heating. These boilers have a unique set of features that include ease of use and efficiency. They are not impervious to problems, though, just like any other appliance; these can range from small problems to major malfunctions. User reviews offer insightful information about these boilers’ dependability and performance in practical settings. Through an examination of Keber gas boiler features, typical issues, and user reviews, homeowners can make well-informed decisions regarding their heating systems, guaranteeing both efficiency and comfort in their living areas.

Why does the burner of the gas boiler go out?

The simple solution is to install fuel cutoff valves on all heating units that run on liquefied or natural gas. There are three scenarios in which shutdown will happen:

• The draft in the chimney is reduced or lost;
• gas pressure in the supply mains has fallen below the norm;
• the flame of the burner itself has gone out.

As a point of reference. Automatic shut-off devices are gas valves made by American Honeywell or EuroSIT in Italy.

Automation can be initiated by external events or by any component of the heat generator breaking down. Energy-independent floor-standing boilers with straightforward designs are easier to maintain in this sense because there is practically nothing to break and external factors more frequently cause the burner to extinguish than malfunctions. This includes producers of gas appliances from the former USSR, such as Danko, Zhitomir, Aton, and Ross.

Honeywell (left) and EuroSit (right) gas valves

A more contemporary wall-mounted electric-gas boiler with a closed combustion chamber is like a mini boiler room; it has extra protection levels that cut off the fuel supply in certain circumstances.

• stopped the movement of the coolant in the heating system (the flow sensor is triggered);
• the air supply is reduced or stopped, which is signaled by a pressostat (another sensor);
• there are power surges in the house electrical system;
• during a power outage.

Note: Currently, only one Russian manufacturer, Neva, sells high-quality wall-mounted boilers; imported brands from Korea and Europe make up the majority of the market.

Different types of natural gas-burning home heaters

It is difficult to adjust the wall-mounted heat generator when it starts to malfunction, but there are a few issues that can be fixed by hand. Read on to learn how to do it correctly.

Reasons for stoppage of operation

There could be multiple causes; let’s examine each one in turn:

1. An extended boiler outage. The boiler might thus defrost and stop working as a result. The result was a sudden extinguishing, accompanied by the sound of wind blowing the flame from the combustion chamber.

These elements cause an alarm signal to show up on the dashboard, signaling the necessity for immediate appliance diagnostics. Contemporary boilers are highly automated and fairly complex systems. Thus, the device shuts off if any of the sensors detect a problem.

While installing a new chimney or replacing the boiler right away is not necessary, it is crucial to identify the issue and work toward a solution.

2. A malfunctioning chimney. It’s crucial to examine the chimney for appropriate operation and function in case of boiler fading issues. The first reason could be ice buildup on the chimney walls, which is brought on by hot steam settling and condensate forming afterwards. The condensation eventually freezes and turns into a thick layer of ice. Following that, the boiler fades out and the draught lessens. Insulation will be the answer to this issue in order to reduce condensate freezing.

3. Draught in reverse. This kind of issue is typically seen during strong wind gusts. The boiler’s flame goes out when wind gets inside the chimney. The most frequent reason for a boiler to blow out and shut down is back draft.

Please be aware that back draft can be extremely dangerous because some older boiler models have antiquated automation that keeps the boiler running and builds up combustion products inside the space.

4. An inadequately raised chimney. Increasing the chimney’s length—the top of the chimney should protrude beyond the roof ridge by roughly 50–60 cm—is a good way to achieve rapid ignition if the chimney’s height is insufficient to stop air from entering the boiler and then fading out.

5. Burnout in the chimney. If there is a hole in the pipe that the wind enters, there may not be enough draught, which causes the chimney to perform poorly. In this instance, the chimney has to be completely replaced.

6. Power spikes. This cause, which results from a drop in voltage level, is independent of any external factors. Many boilers light up again when the proper voltage level is restored, so many owners are unaware that there is a problem.

7. Not enough gas pressure. Boiler fading is typically caused by insufficient gas pressure at the boiler inlet, which causes the unit to boom and fade out. The root cause may be either internal factors, such as the following, or network flaws:

7.1 An issue with the gas meter. Occasionally, the boiler mechanism jams, cutting off the gas supply. The meter mechanism needs to be examined, and its readings need to be adjusted, in order to pinpoint the failure’s origin.

7.2 There has been a compromise in the fasteners’ sealing. When there is a pressure drop brought on by gas leaks, the system trips automatically, turning off the gas appliance. There is a particular smell in the space that indicates this issue.

Note: An ordinary sponge with soapy foam can be used to independently diagnose and identify the issue; bubbles will form on the leakage locations.

Probable errors and causes

This article includes error codes for Hydrosta boilers along with a list of all likely problems and possible fixes. Readings are made in the following order: code, name, and potential issue. Please feel free to ask any more questions in the article’s comments section.

Contact a service center right away for diagnosis and troubleshooting if you are absolutely certain that you can solve the issue and what it is.

Error code E0 – Temperature control sensor error

If it does, there is a problem with the sensor that regulates the room’s temperature. There is an issue with gas ignition accuracy. The following actions are required to solve the issue: Verify that the system is receiving gas. Verify whether the gas valve is open. Inspect the gas line or the cylinder for any presence of gas.

Error code E1 – Error of the heating medium in the heating system

This error indicates that the heating system either has little or no water in it. Verify the functionality of the cold water supply system. Next, give the filters a once over and clean or replace them as needed.

Error code E3 – Water overheating

In the Hydrosta boiler, water is boiling. The uneven circulation of water is the primary cause of this error. Look for dirt in the filter. Verify that the shut-off valves are not locked manually.

Error code E4 – No draught in the chimney

The combustion products are not released into the street; instead, they stay inside the unit. First, examine the connections of the smoke exhaust system in order to eliminate it. Hire an expert if there is an issue with them, or clear the contaminated pipe on your own.

Error code E6 – Gas leakage

If it does, your system is likely experiencing a gas leak. If this problem arises, shut off the gas supply and turn off the appliance right away. Calling a specialist is also necessary.

Error code E7 – Connection error between thermostat and control panel

Its appearance indicates that there is a problem with the connection between the control panel and the thermostat. caused by a break in the contact. Examine and remove.

Error code E8 – Temperature sensor error

It indicates a malfunctioning temperature sensor. A damaged sensor that controls the temperature of the water heating system is either providing false information or none at all. Replace it or fix it.

Error code EE – Fan failure

It indicates a broken fan. Due to severe contamination, this error causes the fan to either not run at all or run only sometimes. Make sure the fan is powered on and connected to the mains before anything else. Examine it for cleanliness and give it a quick cleaning if needed. This may not be helpful; a replacement is probably required.

Error code EF – Flow switch error

Its appearance indicates a flow switch issue, specifically that the water is not turned off for at least an hour and a half. The boiler automation, which noticed the absence of activity, reported this issue. Verify that the switch functions properly; it might need to be cleaned or replaced.

Error code EA – Error in the frequency of the refill request

The boiler automation sent out this signal after determining that the request for a water refill was made more than five times in a minute. Examine the dropping circuit for any issues. Examine the filter. Verify the water supply’s water pressure.

Error code U0 – System start-up error

The appliance tries to restart itself multiple times when this error occurs. After some time, it can be removed, or the user can do it on their own.

It’s crucial to keep in mind that using Hudrosta boilers necessitates the use of voltage stabilizers because the automation is highly susceptible to network voltage fluctuations, which frequently occur.

Technical characteristics and device

Keber boilers have a long service life and a dependable assembly. There is a 15-year warranty from the manufacturer. Additionally, this brand’s units are known for their high efficiency.

Gas burners are a feature of Keber gas boilers, which allows for the provision of:

• stable heating of the coolant;
• Maximum complete combustion of fuel.

Furthermore, these elements exhibit strong anti-corrosion qualities.

The fuel chambers of Keber boilers are smaller than those of comparable heating appliances made by other manufacturers because they feature gas burners. Fuel burns as efficiently as possible thanks to the unique design of automatic "Danko" burners, even when the flame height reaches 7 cm.

The "Danko" nozzle is an approved design that is on par with its European equivalents in terms of quality.

"Arbat," the automation that controls the operation and safety of heating equipment, is also part of the set. There are five security tiers. The unit will turn off on its own if there is a drop in pressure in the gas or water supply system. The straightforward design of automatics contributes to their dependability and makes repair easier in the event of a malfunction.

It is important to note that customers have the option to purchase the Keber model boiler from Eurosit, an Italian automation company, which is more costly but offers higher quality and dependability. Virtually no external intervention is necessary for these units to function.

Here is information on different kinds of automatics for gas boilers.

The company that manufactures Keber boilers offers a large selection of models with varying capacities, including 10, 12.5, 16, 20 kW, and t.д.

Let us examine the technical specifications of the apparatus using the floor model Keber 12,5 as an example.

• type of execution – floor standing;
• open combustion chamber;
• power – 12.5 kW;
• efficiency – from 85%;
• mechanical control;
• – 1,62 м³;
• weight – 39 kg;
• heated area – 125²;
• The maximum water pressure in the heating system is 3 bar.

Gas boiler KS-G Keber 12.5 with EUROSIT automation that doesn’t require energy

The gas burner goes out

Draught problems.

The height of the chimney needs to be lowered if there is not enough draught, which is indicated when the gas burner goes out. The height rises in proportion to an excessive draught.

Expert advice: To make it easier for combustion products to escape, clean the chimney.

Depressurization may happen if the gas pipes are used for an extended period of time and their connection was not made carefully during installation. Welded joint inspection is done in the pipes at working gas pressure using techniques like smearing with soap solution. Patching is done at the locations where gas leaks are found.

Coils, which are specifically made for this purpose, can be used for sealing. The joints are sealed with specialized sealants. A gas explosion could occur in the future if this work is not completed on time due to the leak. As was previously mentioned, boilers with an open system of combustion product removal are the primary source of draught problems.

Many draught issues are avoided by automatic systems installed on gas boilers. These sensors will extinguish the burner in the event of an inadequate draught and turn off the gas in the event of a strong draught. If there is too much airflow, the flame may pull away from the burner. In this case, the automation will cut the gas off to avoid waste.

If your concerns about a draft issue are not too evident, lighting a match near the boiler will suffice to allay them.

If there is not enough draught:

• The gas burner will also go out if the thermocouple contacts are missing (in this case it is easy to clean them yourself).
• does not work and in the case of failure of the sensor, which is responsible for measuring the draught.

Solutions. In this case, repairing it won’t be enough; a full replacement is required.

The following steps must be taken in order to determine whether the sensor is broken: Light the boiler and shut off the terminals. If it works, the sensor needs to be replaced because there is a problem with it.

Important: Insufficient pressure in the central gas pipeline may be the cause if the boiler fire ignites and extinguishes quickly. Resetting the boiler to a lower gas pressure setting will solve the issue.

Signs of malfunctions

Gas boiler malfunctions are categorized based on several indicators:

• intermittent, final faults;

These circumstances occur when certain parameters simply do not match the operating parameters, indicating an equipment malfunction.

• primary, secondary;

Diagram of a gas boiler fault.

For the first time, the equipment’s primary failure—which may be referred to as independent—is noticed. If the first one’s repair was not completed, the secondary one comes after the primary one. As a result of the potential for total heating equipment failure, appropriate action must be taken right away.

• obvious, non-obvious;

Leaks and heat exchanger malfunctions are examples of this type of malfunction. It is frequently very difficult to find such breakdowns; a call to the master is necessary.

• sudden, gradual faults.

The problem could literally arise anywhere; that is, if the heating boiler was operating normally and without apparent cause prior to the malfunction. The primary cause is an abrupt shift in the operational environment and other unforeseen circumstances.

Returning to the contents table

Signs of breakdowns

What are the most typical indicators of a breakdown, then?

User-voiced issues often look like this:

The gas boiler does not work or simply does not turn on.

A thorough examination reveals the following details, which may have the following effects:

• possible clogging of the burner;
• closed valve (you can easily check this yourself);
• low gas pressure in the chamber;
• malfunctions in the ignition system;
• no voltage on the boiler.

Draught malfunctions are the second most frequent and widespread issue. This primarily pertains to boilers that have an open system for removing products made from carbon monoxide.

Gas burner goes out.

The foundation for generating the reasons behind this kind of issue can be;

• faults in the draught sensor;
• the gas line connections are depressurized;
• the gas chamber does not have sufficient back draft;
• no contact with the thermocouple.

The temperature cannot be set after switching on.

The information above makes clear that every breakdown has specific causes. In this instance, the malfunction’s possible cause is:

• contamination of the chimney or its improper design;
• in the case of using a two-circuit boiler, a considerable amount of electricity is consumed for heating water by the system;
• insufficient air for combustion of the gas in the chamber;
• the electrical components of the boiler are in disrepair.

The unit does not obey automatic shutdown commands.

The automation needs to be triggered to shut down when the temperature reaches the target temperature that the system has set. The thermostat senses the temperature and sends information to the processor. The data transmission signal is not generated if there is a malfunction in this apparatus.

Causes of boiler failures

First things first, it’s important to determine what could potentially go wrong with gas heating boilers during operation. There are several distinct factors that can lead to issues.

Electricity

Gas boilers of today come with a variety of automation features. They are then driven by electricity. Furthermore, even though the world is actively creating systems to use alternative energy sources in the twenty-first century, many regions still struggle with the stability of the power grid, particularly isolated villages and various dacha settlements.

One of the biggest threats to a contemporary gas boiler is an abrupt shutdown or a strong power spike.

Make a pre-purchase purchase of a high-quality stabilizer to avoid all the associated issues. Spend your money on a good stabilizer from a reputable manufacturer right away. Cheap models of this device are not very useful, so don’t save money on this one. You can be sure that you will spend a lot more money on repairs and replacements in the event that the automation breaks down.

Water

Gas boilers with wall-mounted models are frequently used in residential settings. These units handle the preparation of hot water and space heating at the same time.

Wall-mounted boiler designs incorporate a flow heat exchanger into their construction. Poor quality hard water with different impurities is the biggest threat to the gas boiler’s heat exchanger. Nevertheless, a heat exchanger exposed to poor quality water may malfunction after just one season.

Install specific filters to stop this kind of malfunction. An all-inclusive water treatment system is the best choice. Using purified water is far safer for your health and will extend the life of your boiler.

Systems for treating water

Errors during installation

As any informed individual will tell you, only licensed professionals should install and pipe gas heating equipment.

Errors of any size during the equipment installation and connection process can have permanent effects. For instance, poorly installed plumbing can cause a cast-iron gas boiler with a power output greater than 50 kW to simply break apart at low temperatures.

Hire experts to install the boiler if you’re not a skilled gas engineer.

Thus, if you lack experience as a gas technician, leave the boiler installation to the experts. By doing this, you’ll avoid a lot of future issues.

Weather conditions

Unfavorable atmospheric phenomena can also cause a variety of issues to surface. People turn on the heating almost to the maximum during icy winters. As a result, the gas supply system’s pressure significantly drops. Boilers are consequently unable to reach their maximum potential.

You cannot tell your neighbors that what they are doing will only make the situation worse; you will not be able to resolve this on your own. Installing a second boiler that runs on a different fuel is one way to address the issue.

Coal boiler that runs on solid fuel and has a hopper.

Preventive recommendations

It’s not for nothing that prevention is the best medicine. Every year, gas boilers require preventive maintenance, which must be completed prior to the start of the heating season.

If at all feasible, maintenance ought to be done twice a year, once before the heating season begins and once it has concluded.

Verify the serviceability of each of the boiler’s previously covered components. Pay attention to the preventative advice provided by the manufacturer in the boiler handbook. Fix any issues as soon as they appear, if at all possible.

Recall! An apparatus that has the potential to be hazardous is a gas boiler. Incorrect and premature use of troubleshooting can have irreversible effects. Thus, exercise caution and refrain from performing any repairs if you are unsure of your skills or the propriety of your course of action. Otherwise, adhere to the guidelines given.

Video – Repair of gas boilers with their own hands

Arrangement and control of these units

The following features of the Hydrosta boiler design should be highlighted:

1. The presence of an embedded microprocessor. It helps to track the setting indicators and performs a smooth change in the power of the device. Also microprocessor controls the set temperature of the heat carrier.
2. A forced-air ventilation system. It effectively removes smoke gases.
3. Control panel. It is a portable mechanism: the digital indicator and the sound signal present on it make it possible to carry out control from a sufficient distance.
4. Functioning of nodal mechanisms of the boiler traces the telemetric system. In case of any breakdown, a warning signal is immediately sent to the control panel.
5. Modulated gas supply system. To increase the economic efficiency of these devices, they are equipped with electronic timers.
6. Hydrosta boilers are characterized by their small size, modern design and ease of operation.

Features of breakdowns and their approximate classification

Any fault, no matter how big or small, needs to be thoroughly and quickly fixed because a malfunctioning gas boiler can result in both an explosion and an accident.

Many errors can be fixed by users without waiting for the required preventive maintenance. For instance, you may notice that the water is heating up too quickly, hear strange noises, or find that a tiny component is broken. This is a sign that you should take care of repairs on time and without going too far. Less severe and less expensive will be the outcome.

Equipment specialists classify gas boiler malfunctions according to the following criteria:

• dependent or independent of each other breakdowns;
• intermittent or final (an intermittent fault occurs when some parameters go out of the norm, and then, when they are restored, the activity resumes: as an example, a decrease in voltage in the network, after which the system resumes its work);
• hidden faults or apparent (hidden faults, such as heat exchanger malfunctions or leaks of various kinds, are difficult to find and will require a call to a master);
• appearing after a long service (gradual) or suddenly appearing.

With the exception of 10% of defects, almost all problems can be visually detected by heating system experts.

How to normalize the draught

Calling a master is required if, after closing the sensor’s terminals, the boiler did not function; if it did, new sensors are required.

Breakage of the draught sensor becomes the reason that the equipment starts to go out after ignition, the boiler can not be started in any way. Sensor malfunctions lead to complete failure of the gas equipment. The malfunction of the gas boiler is easy to determine, to do this, you need to close the terminals between them and try to light the boiler. If the equipment works and no irregularities are observed, it means that the sensor needs to be replaced. If this does not help, it will be necessary to call a master, who will conduct a general diagnosis and perform the appropriate repairs. In rare cases, a complete, but whether this is the case, only a specialist will be able to determine.

An excessively strong air draft may continuously remove the flame from the burner, resulting in the boiler shutting off. You can independently determine whether the draught is too high.

It should be noted that the boiler produces an excessively pale, nearly colorless flame, and that there is a loud, continuous hum while it operates. If the air flow is too strong, you can place a lit match near the air intake and it will burn out.

Diagram showing the proper placement of the chimney and boiler.

If the chimney and other equipment are positioned incorrectly, the boiler may also be faulty. Wind breaks off the flame tongues by obstructing airflow and creating overpressure. As a result, it is essential to ascertain the direction and type of winds that are present in the area right away when determining where to put the boiler. It is advised to enlist the assistance of a specialist for this task, who will assist in positioning the boiler appropriately and in compliance with the standards, as well as in removing the chimney so that it faces the specified direction.

Returning to the contents table

Possible malfunctions of the equipment

Naturally, floor standing gas boilers "Keber" can malfunction occasionally, just like any other equipment. Owners of country homes equipped with this equipment typically experience the following issues:

• unstable operation of the igniter;
• Burner shutdown after some time after the start of operation;
• no fuel supply to the injectors.

In the first instance, nozzle blockage may be the root of the problem with the gas boiler "Keber." Additionally, the meter’s failure to let enough gas into the system can occasionally cause the igniter to operate erratically. The owner of a country home must either clean the injector or correctly adjust the controlling equipment’s operation to remedy the situation.

The burner may shut off for a variety of reasons after it has started. However, the thrust sensor’s failure is the most common cause of this. You are unlikely to be able to fix such a malfunction on your own. This is something that only a house call specialist can handle.

The rod in the middle of the construction of the model with the Arbat safety system has probably jammed if the gas supply to the nozzles has stopped. In this instance, a small amount of machine oil must be dripped into the gas boiler "Keber" in order to solve the malfunction. Checking the unit for gas leaks after that is imperative.

Use of diesel

An outstanding substitute for gas-powered options was a floor-type, two-circuit diesel mechanism:

When discussing these models, it is imperative to acknowledge their limitations right away:

1. Increased noise when the inflatable burner is operating.
2. The need to install a large container for fuel.

Additionally, there are some setup quirks with this heating system. They rely on the kind and caliber of fuel that is liquid.

A circulation pump, security features, and an expansion tank are all included in the device’s basic set-up. A smartphone or remote control can be used to operate these mechanisms.

It’s crucial to understand that routine maintenance is required for a two-circuit diesel boiler. It entails cleaning the condensate, the flue system, the furnace, and other components.

Neglecting this will cause the device’s performance to noticeably decline.

In the event that this is overlooked, the device’s performance will suffer significantly.

The equipment begins to smoke

The gas boiler’s operating scheme.

When soot appears when the heater is turned on, it is also possible to observe a malfunction. Why does it occur? There is constant gas burning while the equipment is in use. About 10 m³ of air are required for every 1 m³ of gas mixture; if there is insufficient air, the gas does not have enough time to burn completely, and soot forms. The amount of air that the gas boiler’s burner draws in must be adjusted in order to stop this from happening.

The following is how this is carried out:

• First, it is necessary to find a washer for the equipment flap. It will allow you to adjust the incoming flow of air masses;
• when the burner is lit, the air flow is regulated. It is necessary to observe briefly how the flame burns. It is recommended to use a small mirror if it is not possible to look inside the boiler casing. If the gas boiler has an excess of air masses, a rumble is heard, there is a breakaway of the flame from the burner, then this is fraught with disconnection of the equipment. The flame is usually blue in color, some parts of it acquire a greenish tinge, combustion is noisy. If there is a lack of air, but the flame is red with yellowish flecks, then such a lack of air also leads to a shutdown. In any case, it is necessary to adjust the supply, so that you can normally use the heating equipment. In normal combustion, there are almost no traces of soot, the flame itself is grayish.

Along with the appearance of soot, there is also an excess of dust in the air, which is simply drawn into the burner when the heating boiler is operating. This undesirable occurrence clogs all air channels, resulting in the appearance of soot, which deposits on the burner itself as well as the equipment’s walls, leading to a variety of malfunctions.

Return to the contents table

Boiler goes out after switching on

You must place a match against the air duct and watch the flame to determine whether the boiler draft is present.

Boilers for gas heating are capable of shutting off when the burner fades. This behavior has a number of causes:

• A problem with the draft, which is either too large or simply missing;
• The thermocouple has a bad contact;
• Traction sensors of the equipment are defective, require replacement;
• Strong draft, which extinguishes the flames.

In the first instance, the draught needs to be checked; the equipment isn’t the issue; rather, it’s the operating circumstances. This doesn’t require a master’s assistance to complete on your own. The draught needs to be checked right away.

You will need to use extra traction sensors if the heating boiler starts to lose heat after it is turned on.

Checking the draught on your own is very simple; all you have to do is hold a lit match up to the air duct and watch how the flame behaves. The tongue should burn evenly inside the body.

Inadequate contact causes the equipment to malfunction when it ignites, causing the burner to extinguish quickly after it ignites. Simultaneously, there is a faint pop, and the flame extinguishes. In this instance, the fix is fairly easy: all that’s needed to ensure proper execution is to clean the contacts.

Go back to the contents table.

Overview of manufacturers

Gas services and industry experts advise utilizing boilers made by the company "Konord." The units have different functional features and are offered in multiple versions. Only floor-type boilers are produced.

The primary distinction from other analogs is the low cost and lack of electricity requirements for operation.

Keber boilers, which have an automated safety and regulation system that provides precise gas supply and temperature stabilization, are also very popular.

This article (https://teplo.guru/kotly/reyting-gazovyih-kotlov.html) rates contemporary gas boilers.

Gas boilers from the AOGV series are widely used to heat buildings that have either artificial or natural circulation for water heating systems.

Termotechnik offers a wide range of boilers, including gas, solid fuel, floor standing, and parapet type boilers. Years of experience ensure superior quality, long service life, and dependability of the products.

It takes extra care and attention to eliminate issues associated with boiler blowout. In order to identify and rule out the source of the malfunction, every boiler component must be inspected. If none of the aforementioned fixes work, it’s worthwhile to contact a gas service technician. Keep in mind that solving issues as soon as possible will stop more malfunctions and safeguard the residents of the home as well as the entire system.

One of the most dependable producers of gas boilers in Russia is thought to be Siberia. Here is a link to reviews of their work and a list of models: https://teplo.guru/kotly/models/kotly-siberia.html

Watch the video, where the expert discusses one of the most frequent causes of gas boilers going out in the wind and offers advice on how to improve the draught inside the boiler.

Typical gas boiler faults

Common issues with gas boilers

There exist several common malfunctions that can usually be resolved by the user using their own hands. Additionally, a list of issues will be provided, from the appearance of which you can only take precautions until a specialist arrives.

Gas odor

Should there be a noticeable smell of smoke or gas in the space, shut off the boiler right away and open the door to let fresh air in.

Functionality diagram for a gas boiler

Make an instant appointment with an expert. Attempting to resolve a gas leak issue on your own without the necessary expertise is highly risky and foolish.

Breakdown of the combustion sensor

In the event that the gas supply pipe or combustion sensor breaks, shut off the boiler, shut off all gas valves, and let the appliance cool completely.

Once some time has passed, go back inside the room to smell gas. Try turning the boiler on again if the draught is not the problem. Make the repairman’s appointment right away if there isn’t a draft.

Boiler overheating

One of the most frequent issues with contemporary gas boilers is overheating. This could be the result of a heat exchanger blockage or an automation device going down.

Repairing an automatic requires the right knowledge.

The heat exchanger is easily cleaned by hand. Stainless steel and copper are the two materials most frequently used in heat exchanger construction. Although cleaning them is usually not a problem, proceed with extreme caution.

The main heat exchanger of the wall-mounted gas boiler made by Beretta

Manufacturers advise that heat exchangers be cleaned of soot every few years (the precise time frame that each manufacturer specifies in the equipment’s instructions).

Main heat exchanger (heating circuit) of the gas boiler Rinnai SMF

It is sufficient to remove the heat exchanger and give it a thorough cleaning with a metal brush. It is preferable to use a metal dishwashing sponge in place of the brush when dealing with copper heat exchangers.

Supercharger fan malfunctions

Fans’ bearings are where the problems lie. Try to fix the issue as soon as you can if your boiler’s fan isn’t turning the prescribed number of revolutions.

Fan (3311806000) for gas boiler Daewoo

To accomplish this, unscrew the fan’s back, remove the stator, and oil the bearings. While machine oil works well for lubrication, it is preferable to use a higher-quality carbon compound with heat resistance if at all possible.

Fan RLA97 (Aa10020004) for Electrolux gas boiler

A short circuit with intercurrent can also cause issues with the fan. This malfunction requires expert intervention. Replace the winding on the stator by taking it to a repair shop, or replace the faulty unit right away with a new one.

Problems with the chimney

Diagram for the flue of a gas boiler

The coaxial flue ducts become severely clogged when different malfunctions in the operation of the gas heating boiler occur frequently.

Take out the chimney and completely remove all soot from all of its components. Thus, you will not only bring the unit’s efficiency back to its previous level but also greatly boost the boiler’s efficiency.

Boiler switches off

The boiler may abruptly shut off for a number of causes. Usually, this results from the combustion sensor not working properly. In turn, the most common cause of this issue is gas pipe contamination.

Thermona boiler draught sensor, measuring 87°C

Take off the spigot, give it a good rinse with water, give it a cotton swab cleaning, and blow out any remaining moisture residue. Try to turn on the boiler after moving the spigot back into position. Speak with a technician if it doesn’t function.

Malfunctions of gas boilers Keber

Any equipment can, of course, malfunction. Boilers made by Keber are not unique. Think about the most frequent issues that owners of this kind of equipment deal with:

1. Unstable operation of the igniter. This problem is usually solved by cleaning the nozzle . In some situations, it is necessary to check the meter, because it can not allow gas to enter the system in the required amount.
2. The gas burner goes out a few minutes after switching on. The reasons that lead to this can be many, but most often it is due to the failure of the draught sensor. It is best to contact a specialist.
3. No gas supply to the nozzles . If you have purchased a boiler with automatics "Arbat", then, most likely, the rod in the middle part of the structure is jammed. You can drop a little machine oil yourself, then check the automation for gas leaks. If the above actions are not successful, then you should contact a specialist.

Comments regarding the Keber KSG 10K-01 boiler

In summary, it is important to note that the Keber gas boiler is an effective heating appliance. User reviews attest to the device’s long service life, ease of use, and economic efficiency.

Characteristics of floor type devices

Consider Hydrosta HSB as an illustration. They appear as follows:

These mechanisms have the same features as their wall-mounted counterparts, but they also have improved performance and additional functionalities.

1. The heat exchanger is made of "stainless steel", which greatly increases the period of use (up to twenty years).
2. Reducing noise levels. Functioning of the mechanism is based on forced air injection, and removal of waste after combustion. A special unit of the device – silencer reduces the intensity of noise.
3. Two-circuit mechanism Hydrosta HSB is put in places with a large volume of heating area. Equipping with a built-in storage tank significantly reduces the time for heating the liquid.

Features	Faults and Reviews
Energy-efficient design	Occasional ignition issues reported
Compact size for easy installation	Some users experienced leaks
High-quality materials for durability	Customer service response time could be improved

Selecting the ideal heating system for your house is essential for both efficiency and comfort. Keber gas boilers come in a variety of features to suit various applications, ranging from high-efficiency models for larger homes to small-space-friendly compact designs. Homeowners have given Keber boilers high marks for performance and dependability.

Keber gas boilers might, however, eventually experience problems just like any other appliance. Thermostat malfunctions, leaks, and ignition problems are common problems. Even though these problems can be annoying, many of them are simple to resolve with a qualified technician’s assistance. Frequent maintenance can also aid in preventing the occurrence of these defects.

Users generally agree that Keber gas boilers offer efficient heating solutions, despite the odd malfunction. Their energy-efficient designs lower utility costs while simultaneously keeping your house warm. You can also rely on Keber boilers to endure years of use thanks to their reputation for durability.

To sum up, Keber gas boilers provide homeowners with a dependable and effective heating solution. Their array of features, along with favorable user feedback, make them a well-liked option in the market. Even though problems might arise from time to time, regular upkeep and expert assistance can guarantee that your Keber boiler will continue to provide warmth and comfort for many years to come.

Video on the topic

Repair cleaning of heating gas boiler Hearth on full extinguishes does not ignite thermocouples tazalau

gaz34.How the local gas engineers treat the customer. Keber gas boiler part1

Boiler Mizudo Review in 2 words