ISOPLAAT and ISOTEX plates and panels installation instructions

It is essential to have adequate heating and insulation in your home for both comfort and energy efficiency. Installation of insulation panels, like ISOPLAAT and ISOTEX, is one of the best ways to accomplish this. With their superior thermal insulation qualities, these panels can help keep your house cool in the summer and warm in the winter.

Because ISOPLAAT and ISOTEX panels are meant to be simple to install, both professional contractors and do-it-yourselfers can use them. However, if you want to maximize their effectiveness, proper installation is essential. We’ll include detailed installation instructions for these insulation panels in this post so you can take advantage of all their advantages.

Knowing the fundamentals of ISOPLAAT and ISOTEX panels is essential before beginning the installation process. Expanded polystyrene (EPS) and extruded polystyrene (XPS), two materials well-known for their superior thermal insulation qualities, are commonly used to make these panels. They might also have a foil facing or another type of protective layer to improve their resilience to moisture and durability.

The space where the panels will be installed must be properly prepared before installation. Making sure the surface is clear of any debris or obstructions and dry and clean is part of this. In order to guarantee that the insulation panels adhere properly to the surface, it might also be necessary to apply a primer or adhesive.

The installation procedure can start as soon as the preparations are finished. To ensure a tight and secure fit, this usually entails measuring and cutting the insulation panels to fit the desired area. Next, using mechanical fasteners or adhesive, the panels are attached to the surface, being careful to properly seal all joints and seams to avoid thermal bridging.

Decorative panels of istex

Crucial! During the finishing work phase, after all "wet" processes that can greatly raise humidity were finished, including plumbing and electrician wiring, panels are installed in dry rooms. Given that the ISOTEX panels are "breathing," it is advised to remove the packaging and leave the panels in the room for a full day.

For installation, you will need a square, a knife, a roulette, a pencil, brackets for a stapler and a construction stapler itself. For gluing to the walls, the "liquid nails" mounting glue is used. If the ceiling or walls of wood, gypsum plates or concrete without significant curvatures, then the iSotex panels are attached directly on the surface with glue or brackets. If the surfaces (walls or ceiling) have large irregularities, a wooden crate is installed under the panels. The panels are easily cut by a sharp carpet knife on a metal ruler. Cut from the side of the decorative coating. Any woodworking tools are also suitable for cutting: a jigsaw, a disc saw, etc

Since the ISOTEX panels are “breathing”, it is recommended to open the packaging and withstand them in the room 24 hours. For installation, you will need a square, a knife, a roulette, a pencil, brackets for a stapler and a construction stapler itself. For gluing to the walls, the "liquid nails" mounting glue is used. If the ceiling or walls of wood, gypsum plates or concrete without significant curvatures, then the iSotex panels are attached directly on the surface with glue or brackets. If the surfaces (walls or ceiling) have large irregularities, a wooden crate is installed under the panels. The panels are easily cut by a sharp carpet knife on a metal ruler. Cut from the side of the decorative coating. Any woodworking tools are also suitable for cutting: a jigsaw, a disc saw, etc.

Wall panels of istex with paper coating

Installation on the crate

Wooden strips measuring 19 by 44 mm in cross section are used for crates. A 290 mm step must be used when installing the strips (measure between the centers of the planks). The panels are fastened to the crate using brackets spaced no more than 100 mm apart and measuring 10 to 14 mm.

Installation for glue

Put a strip of glue on the panel’s back that is about 20 mm from the edges, and place glue drops every 200 mm in the panel’s center. To level the glue’s surface, press the panel against the wall a little distance away from the subsequent panel and move it laterally.

Wall panels with textile coating

Installation for glue

Install the 19×44 mm strips at 280 mm intervals (measure the distance between the planks’ central sections). If the wall is flat, the panel can be fastened to the wall without the need for a crate. Put a strip of glue on the panel’s back that is about 20 mm from the edges, and place glue drops every 200 mm in the panel’s center. In order to level the glue’s surface and attach the panel to the wall without the need for support, press it against the wall slightly apart from the subsequent panel and move it laterally.

Ceiling panels

Installation on the crate

Dry wooden rails that range in width from 50 to 100 mm are used to construct the crate that the ceiling panels are mounted on. They are positioned with 280 mm separating the center (axes) of the rails (Figure 1). Make sure there is at least 100 mm between the plates when you attach them to the bracket rails. Length of bracket: 10–14 mm. To ensure that the wall panel closes them, the extreme panel needs to be fastened with screws or nails. The panels are positioned along the crate, and the optimal outcome is achieved when the lighting and seam directions line up.

Glue installation

Adhere adhesive strips 20 mm inward from the plate’s edge and a 200 mm drop of glue in the center of the panel (Figure 4). Reattach the panel to the wall or ceiling by pouring glue into the spoon, smearing it, and pressing it in place without tightening it further. Textile-coated panels are put on construction clamps or glue guns that are pointed in various directions. precise installation guidelines included in the product’s packaging.

Tips and recommendations

As previously stated, it is not appropriate to glue wallpaper onto the iso payment slabs. Nonetheless, there are comparable products—like the istex sheets sold under the same brand—that can be used to address these construction-related issues.

Make sure the material you choose is free of external flaws and forms a single unit—no seams should be noticeable due to the material’s thickness.

The price of plates varies according to their size, thickness, intended use, and quantity in the package. Therefore, compared to a plate of the same thickness (10 mm), the heat and soundproofing products with dimensions of 2700 by 1200 mm are 12 mm thick, which is 10-15% more.

To minimize expenses and prevent the purchase of excessively thin or thick products, it is crucial to precisely determine the necessary thickness of insulation. You also receive a cozy and fashionable room.

The main characteristics of soft wood of fiber plates

A number of varieties are intended for specific types of construction work. Every category has its own set of technical requirements. As such, we solely take into account the general traits. Specifically:

• Heat efficiency – 0.045 W/(m*K).
• Sound insulation – up to 26 dB.
• Density – average value of 240 kg/m3.
• Compression resistance – 200 kPa.
• Service life – up to 50 years.
• Fire safety – does not support combustion, prevents the spread of open fire.

It should be noted that in order to improve moisture resistance, the insulation plates are additionally impregnated with a unique composition.

Size and technical characteristics table

Thickness	mm	4	5	6	7.0	7.4	10	12
Width	mm	590	590	590	590	600	600	600
Length	mm	850	850	850	850	1200	1200	1200
Plates in a pack	mm	14	18	18	14	10	10	8
The area of the pack	M2	7	9	9	7	7.2	7.2	5.76
The volume of the pack	M3	0.028	0.046	0.055	0.049	0.054	0.072	0.07
Pack weight	kg	7	11.5	13.8	12.3	13.5	18	17.5
Backs on the pallet	PC	24	20	22	28	20	18	18
Plates on the pallet	PC	432	360	396	392	308
Square on the pallet	M2	216.72	180.6	198	201,6	154.44
Density	kg/m3	≥240	≥240	≥240	≥240	≥240	≥240	≥240
Thermal conductivity coefficient λ10	≤0.050	≤0.050	≤0.050	≤0.050	≤0.050	≤0.050	≤0.050
Bending strength	N	≥2.0	≥2.0
Shock noise level index, ln, w	dB	-54	-54	-54	-54	-54	-54	-54
Impact noise, ΔLW	dB	-22	-22	-22	-22	-22	-22	-22

Installation of windproof plates ISOPLAAT

Slabs can be installed either horizontally or vertically. The wooden frame racks are directly used to mount the parts. Rack step: 0.6 meters (measured by centers). Plates are set with 2 mm gaps between them. Installing an extra rack or horizontal wool (the horizontal are fixed in a vertical folding with a corner of corner plates to the racks) will intensify such areas if the junction of the panels does not fall on the rack.

Professional construction brackets or galvanized nails with wide hats (also known as "bug") are used as fasteners. The mounting process is completed:

• to all vertical stands of the frame, step – 10 … 15 cm;
• to horizontal additional elements after 10 cm;
• according to the additional marking in the factory in the factory in the center of the sheets with a step of 28 cm.

Installing the fasteners requires that they be placed at least 10 mm away from the sheet edges.

It is advised to install an external sheathing device as soon as possible, ideally one month after the installation is finished. In order for the water vapor to escape the wall, the ventilated gap device must be between 20 and 50 mm between the shell and the windproof plate of the iso payments.

Installation at brick, aerated concrete, or wooden walls is done seamlessly, and facade dowels or special glue are used for fastening. The plates have a smooth exterior surface for installation and a wavy interior surface.

Only complete sheets may be used to decorate window and door openings; joints are not allowed in these areas.

Technologies such as ventilated facades (block house, mosquito board), siding, or different types of vapor-permeable facade plasters (like baumit) are used for the external sheathing.

It is important to remember that specific compositions are required for priming; regular primer will damage the plates’ surface.

What is the novelty of payment? These ISOPLAAT 1800 × 25 mm universal plates feature connectable spikes that facilitate easier installation.

Both interior and exterior decoration can be done with the material.

All expenses will be justified by using is payment in a short amount of time. We don’t say that the boring person has to pay twice for nothing. Strict adherence to basic technology will not necessitate any changes, nor will durable sheets require repairs over the course of their service life owing to subsidence and breaks.

Areas of use is payment

Wall covering

The material’s technical properties enable it to be used for both internal and external wall cladding with equal efficiency. When doing internal work, experts advise keeping the material in the room where it will eventually be mounted for a few days to allow the iso payments to become "used to" the microclimate in the area.

Regular drywall glue is frequently used to attach something to a brick or concrete wall. The composition is placed at a thickness of roughly one centimeter on a gypsum basis. The plate must be mounted approximately one centimeter above the floor rather than directly on top of it. Screws or dowels can be used to further reinforce the material once the glue has taken hold. After the material has been leveled, mounting foam should be used at all joints. In addition, the foam itself can serve as the primary adhesive by being applied all the way around the sheet’s edge and in zigzag patterns along its reverse side.

The device is on the crate

In addition to directly gluing is the isolation to the wall, the material can be mounted according to the type of drywall sheets – fixing on the frame crate. For the latter, it is necessary to use wooden bars with sides of at least 45 millimeters. The bars are mounted at a distance of 30-60 centimeters from each other, depending on the thickness of the sheet, is payment. The fastening occurs with nails, which should be scored with a step of 15 centimeters around the perimeter and 30 centimeters along the inner parts of the sheet. At the same time, after installation, the joints between the sheets and the caps of fasteners must be plunged.

Installation of plates on the floor

Similar to the walls, you can attach the material to the concrete directly with glue or to lags (the frame’s analogue). The same guidelines that apply to a crate also apply in the latter scenario. The same foam or glue used for the walls is used for the glue. Although there are other ways to finish something, laminate is the most widely used.

Wall covering

Is payment a common method for decorating interior walls? Its hypoallergenic qualities and environmental purity allow it to be utilized for warming children’s rooms as well. To level the moisture content of each plate, it is recommended to hold ISOPLAAT for a few days in a warm room prior to installation. The material is then primed and puttied. Joint areas are adhered to using a unique ribbon. The walls can then be painted or embellished with wallpaper.

The outside lining of the house may also be paid for with this payment. A unique composition glue that dries quickly and is resistant to cold, wet weather and high humidity is used to secure the panels to concrete or brick materials. For extra fixation, screws or dowels for the facade can be utilized.

One option for adhering the payment to the external walls is to use adhesive cardboard or mounting foam. A layer of glue that is roughly 10 mm thick is put on. Sheets are aligned with the level and fastened to the wall 12 mm from the floor’s surface. Either foam or glue is used to seal the seams. When the surface is completely dry, it is called putty or primed. After then, you can begin working on the facade design with any kind of material.

Even in extremely cold temperatures, the windproof plate of an insulation package greatly insulates the space and aids in preserving a comfortable indoor temperature. Aerated concrete homes, stone, wood, and brick can all be used as insulation for this material.

Specifications

Form-panels for release, 4–50 mm thick. The purpose of the sheet determines its size.

• The parameter 2700 by 1200 mm is considered standard.
• The roped version has smaller sizes – 2400×800 mm. TO
• Roll material is produced in several sizes-2500 by 750, 1875 by 1200 and 1800 by 600 mm with a sheet thickness of 12-50 mm.
• Sheets for interior decoration thinner (4-7 mm).
• The dimensions of the material for floor insulation are 850×590 mm.

Since the iso payment plate has a thermal conductivity of 0.045 W/(m*K), it is comparable to mineral wool. The material is typically used as support for the primary insulation because it is too thin (4–50 mm) to be used as the primary heat insulator.

The wood-fiber structure of the material contributes to its good vapor permeability. This gives him the best defense against "capricious" wooden surfaces and lets you forgo adding another layer of vapor barrier organization.

The panel’s paraffin layer has a respectable level of moisture resistance. Even so, the manufacturer advises against storing them outside for longer than two months as this can cause the material to become wet. This involves a modification to the sheet’s geometry.

If these modifications are not essential for external installation, then they include the finishing layer box, seam openings, and swelling for internal cladding. Because of this, assembling the panel to the wall and adhering the reinforcing tape to every joint are necessary steps in the product installation process.

Even though the material is derived from wood, it has a high enough fire resistance, which is accomplished by interfering with the antipyrene raw materials. The top layer of the plate is carved by high temperatures, and the ash that forms during this process prevents access to the subsequent layers of the material.

From an environmental perspective, is payment regarded as a material that is completely safe to use. This is because its foundation is made of coniferous wood. Consequently, since natural polymers provide adhesion, you can stop using adhesive compounds.

Customers’ favorable evaluation of the material is partly attributed to its bio resistance. Because it contains polymers and essential oils, the wood of coniferous species is resistant to the effects of insects. Moreover, the slabs go through steam processing during the manufacturing process, which enables you to eliminate any insect larvae, microbial spores, and other life forms in the material’s thickness. We can therefore discuss the bio resistance of is payment.

High operating characteristics enable the material’s durability to be guaranteed. The product’s 50-year service life is guaranteed by the manufacturer.

The material is easy to work with; a hacksaw can be used to cut it easily, and its slight weight makes it convenient to install dimensions. In order to guarantee the tightness of the coating, the joint known as "Ship-Paz" that is available on the panels for external finishes is made to maximize the material’s styling.

You can learn more about the mechanical and physical properties of the plates by watching the video that follows.

We’ll walk you through the installation of ISOPLAAT and ISOTEX plates and panels in this post so you can heat and insulate your home. Achieving optimal energy efficiency and comfort in your home requires proper installation, regardless of whether you’re starting from scratch or renovating an existing structure. We’ll cover every step of the process, from surface preparation to panel securing, to make sure you have the skills necessary to finish the job successfully. You’ll be well-prepared to build a warm, well-insulated space that reduces energy costs and keeps you toasty for many years to come with these simple directions and helpful hints.

What is is payment and why it is used

Also known as "Softboard," "Isoplaat" is a soft wood-fibrous slab that is manufactured in Estonia. An example of an MDVP would be:

• Laminat on the floor.
• Wind protection.
• Roofing material.
• Thermal insulation.

This material’s foundation is compressed wood sawdust, which is adhered to with cellulose-based adhesive material. The only real differences between these panels’ "isos" technical attributes are size and external coating. Wind protection and roof installation plates are impregnated from the outside with a paraffin layer that aids in pushing moisture out of the way.

Windproof panels and external wall sheathing

Advantages of ISOPLAAT ISPOTE ALOGOGS

• insulation and thermal insulation walls outside (ISOPLAAT windproof plate), roofs (roofing ISOPLAAT), walls and ceilings from the inside (heat-sound-insulating stove ISOPLAAT), floors (substrate for the ISOPLAAT laminate);
• sound insulation and improvement of acoustics apartments, office, cottages (all plates);
• even walls (ISOPLAAT heat-sound insulation slabs for internal work due to hot pressing are tight and durable, so they can successfully replace drywall from the inside);
• windshield and insulation of the house outside (ISOPLAAT windbreaker slabs due to hot pressing are so strong, so they can act as a fence of frame structures);
• facade finishes can be done during the year (ISOPLAAT windbreaker plates are made with the addition of paraffin (wax), therefore they have volgothetic properties and replace the windproof film);
• Environmental friendliness and health safety (as part of all the plates of ISOPLAAT (iso payments), except for the wood, nothing more and there is nothing more);
• All ISOPLAAT plates (iso payments) “breathe” perfectly, naturally absorb and give moisture, it is this property that is based on the Finnish principle of microclimate correction in the frame house;
• Reliability and durability (thanks to the fibers similar in its structure with felt as well as the absence of ISOPLAAT (isoplacements) plates in the binding substances, they are not subject to moisture -resistant temperatures do not crack and have a service life of at least 50 years);
• Light installation (ISOPLAAT plates (isopos) 12 mm thick weighs only 9 kg, so you can make repairs in the apartment with your own hands or build a frame house on your own alone).

Basic information about the material

Compressed sawdust from coniferous wood serves as the foundation for an isoplane (ISOPLAAT). Sawdust is impregnated with paraffin to create plates, which are then dried and arranged in forms. Factor fastening, which happens during wetting and pressing, also involves the lignin of wood.

At the output, a plate is produced that can be effectively used as walls and flooring with ceilings in various areas of activity. This material is easily mixed with screed or laminate and is used as both an insulation and soundproofing component for floors.

Since the Soviet era, this substance has been known, and its primary application was on floors where it was paid to lower noise levels. Since then, its application has grown considerably, and contemporary versions of these sheets are frequently utilized in frame construction, particularly in the Scandinavian nations.

Features of the plates of iso payments

The characteristics of "isos" in connection to a change in humidity level are of primary interest. Plates are very hydrophobic, meaning they can take in moisture fast and turn pliable and soft. In addition, they maintain their flexibility rather than disintegrating. Notably, the panel remains aligned and their shape does not alter once it has dried.

Every frame house project allows for creation. The expense of using a windproof film over MDVP is a significant factor, but it’s not the only one when it comes to choosing wood insulation. Among its additional benefits, we highlight the following:

Complete installation. "Isos" are installed in any weather conditions and at any time of the year. The sole requirement for higher humidity is adherence to a specific spacing between the plates. For instance, it is imperative that you use specialty tapes to glue the seams of the wind-protecting film. Only at temperatures above zero can they be used.

• The strength of the fastening. Due to the softness of the plates in wet weather, a strong clutch with the racks of the building is provided, since they fit more densely. For sufficient stiffness of the frame, you can use sheets of MDVP from 12 to 24 mm thick, doing without installation of UKOSIN.
• The reliability of insulation. MDVP slabs create good cold protection. They can be used for installation of both external and internal skin. ISOPLAAT sheets as a heater received a high positive assessment of specialists from North America, Canada and a number of Scandinavian countries.
• The effectiveness of sound insulation. The creation of a skin of a wood layer contributes to increased protection against third -party sounds. To achieve the index in 20 decibels, it is enough to sheathe MDVP house with a thickness of 12 mm.

Why not OSB, GVL, namely iso payments

To date, the only Russian document regulating the construction of frame houses (SP 31-105-2002-2002.) also implies the use of slab or leaf material as the first layer of lining of external walls. Although, again, in an optional order. This material is the plates of OSB, GVL, drywall, etc. On the one hand, the SP-2002 is a document that is very reminiscent of some Canadian documents and, you can mean, is partially a copy of the Canadian-and Canadians are in the household of one of the champions. On the other hand, to this day, spores do not subside disputes around whether there should be a windproof material in a steam -proof? And here in the SP-2002 there is a contradiction. The document draws such a "pie":

As you can see, this "cake" for visualization does not have any baskets. Neither does the OSB have a vapor-permeable material between it and the insulation, nor does it have one between it and the exterior skin, despite this being mentioned in the text. Upon viewing such a "pie," one may conclude that the issue of moisture leakage from the wall is implausible; however, this is not totally the case. If you closely read SP-21, you’ll see that it addresses how to keep wood and heaters safe from excessive moisture:

10.1 The outer protective skin of the wall frame and the waterproof layer, the actual finishing (facing) layers, the joints of the external wall elements, the devices for removing atmospheric moisture and air layers that have penetrated the cladding of the wooden structural elements, and the insulation from getting wet are among the general requirements for the design of the external decoration (cladding) of the outer walls of the house.)

10.2 The wall frame’s external protective sheathing and waterproof layer.

This indicates that the joint venture’s picture and text are at odds with one another: it is not feasible to close the insulation from the outside using non-vapor-permeable materials. Why?

We put the "problem" of the dew point in the frame aside because it is more of an issue for brick and aerated concrete structures. This temperature difference is precisely in the insulation and poses no threat to the longevity of the supporting structure. However, there are still two issues with using non-vapor-permeable materials on the outside.

⦁ Every construction zeroism. We have a frame for the chamber drying process, but it is possible to alter the humidity percentage during the building phase in a more significant way. In the winter, ice may also partially form on the frame. Naturally, all of this moisture will either stay in the "pie" or evaporate extremely slowly and ineffectively if non-parametible OSB plates are used. What can cause mold and fungus to grow? This won’t occur if use of is payment is involved. To. The substance is permeable to vapor.

⦁ Safety from mishaps and "crooked hands." Water vapor will inevitably fall into the "pie" of the wall if the vapor barrier from the inside of the building is damaged during construction or during normal house operations. When using a material with zero vapor permeability, the moisture will once more stay inside the "pie," with all the associated consequences. Steam travels from the inside to the outside.

Generally speaking, we follow the same procedure due to standard construction logic, the fact that the most esteemed Russian colleagues, Finns, and Swedes use vapor permeable slabs of iso payments in their wall "pies," and other factors. Consequently, dependable wind protection is offered without compromising the strength of the power frame or insulation.

A few words about the manufacturer

Finland’s Skano Group is a well-known global leader in the wood processing industry. The company’s history began in 1945 with the founding of a modest furniture factory.

The primary activity was established in 1968 with the establishment of its own wood-fiber plate production.

Fibreboard is the structural unit that produces insulation. As of right now, only one Estonian company’s shares are traded on the stock exchanges in Tallinn.

The company manufactures leaf-payment and isosetex sheet heaters for the market and specializes in cabinet furniture production. Nearly every European nation is supplied with products, and the markets for building materials in Asia and Russia are also covered.

Features of installation

As previously mentioned, one undeniable benefit of the material is how simple it is to install plates. As a result, anyone can handle the work—even those without specialized training or experience in construction. Following a specific order is crucial. Typically, installation is carried out in line with this plan:

• A wooden crate is made with a step of 30-60 cm. The distance depends on the thickness and size of the plate.
• Sheets are installed vertically, aligned, fixed with self -tapping screws.
• Fasten elements should be completely drowned in the stove without protruding above the surface.
• It is recommended to plunge the places of fasteners.

Please be aware that the sheets should be laid out evenly; lunges and recesses as well as sharp levels of leveling are not permitted. The wall’s geometry is in alignment, and the cement-sand mortar is sealed with cracks.

The sheets are pressed up against the wall, the glue is applied in wide or pointy stripes, and it is allowed to set for a while.

The wall’s geometry is in alignment and the cement-sand mortar is sealed with cracks. The sheets are pressed up against the wall and the glue is applied in wide or pointy stripes, holding for a while.

Advantages

• Vapor permeable wall skin.
• Frowning plate with the best thermal insulation. Installation close to insulation.
• Rings the cold bridges over the frame of the frame structure.
• Effective noise protection (from -23 dB).
• Hard slab material, unlike the film, is guaranteed to exclude the tears and the occurrence of cold bridges for the entire service life (50 years).
• Dense fit to the racks and rafters due to elasticity and elasticity – lack of blowing and drafts.
• Resistance to atmospheric moisture – fibers are saturated with paraffin.
• Effective protection against summer heating due to high heat capacity.
• A steam -permanent plaster can be applied to a plate of 25 mm thick.
• Environmentally friendly material. Does not contain glue and other chemical binders;
• Light and simple installation. Tools: tools for processing wood, nails or construction stapler.

The ISOPLAAT windshield has evolved into the Universal ISOPLAAT 1800×600 Ship-PAZ 25 mm. Describes this look in detail.

Vapor barrier properties of the inspection panels

The steamproofing house is a crucial location that should not be disregarded. When it comes to the problem of breeding too much moisture, the material that it can pass through easily must be used. It will be best to use "iso payment" to avoid the following issues:

The wintertime ice formation on the frame’s boards due to elevated humidity levels. The application of vapor-permeable material will guarantee the quick evaporation of surplus moisture and shield the walls from the growth of fungi and mold.

Settlement of accumulated moisture in the wall’s "pie" in the event that the vapor barrier is unintentionally damaged

Establishing the necessary conditions for its unimpeded exit is crucial. The danger of moisture "clogging" can be avoided thanks to the properties of MDVP.

The arrangement of the frame house’s walls’ proper "pie"

ISOPLAAT	ISOTEX
1. Clean the surface thoroughly where the plates will be installed.	1. Prepare the surface by cleaning it properly.
2. Apply adhesive evenly on the back of the plate.	2. Spread adhesive evenly on the back of the panel.
3. Press the plate firmly onto the surface.	3. Press the panel firmly onto the prepared surface.
4. Use screws to secure the plate if necessary.	4. If needed, use screws to fix the panel in place.

Your home’s insulation and heating systems can be greatly enhanced by installing ISOTEX and ISOPLAAT plates and panels. Because of their superior thermal performance, these materials can help keep your house cool in the summer and warm in the winter. To maximize the effectiveness of the plates and panels, make sure they are installed correctly by closely adhering to the installation instructions.

The simplicity of installation for ISOPLAAT and ISOTEX is one of their main advantages. Even homeowners with little DIY experience can install these materials successfully with the right tools and methods. When compared to hiring a professional installer, this can save money and time. To prevent any errors that can impair the insulating qualities, it is crucial to carefully adhere to the manufacturer’s instructions.

To reap the full benefits of ISOPLAAT and ISOTEX, proper installation is essential. This entails making certain that there are no cracks or openings where air could escape and that the plates and panels are firmly fastened to the walls or ceilings. In order to stop heat loss and preserve energy efficiency, it’s also critical to seal any joints or seams using the right materials.

Apart from enhancing thermal efficiency, ISOPLAAT and ISOTEX can also aid in sound insulation, assisting in lowering noise levels within your home or coming from outside sources. This can improve your home’s comfort and tranquility and raise your family’s standard of living in general.

In general, improving your home’s insulation and heating system at a reasonable cost can be achieved by installing ISOPLAAT and ISOTEX plates and panels in accordance with the manufacturer’s instructions. You can enjoy a warmer, quieter, and more energy-efficient home with these materials’ excellent thermal performance and simple installation. They provide a workable solution for increasing energy efficiency and comfort.

Video on the topic

Installation of decorative panels ISOTEX Isotex on the ceiling video. ISOPLAAT ISOPLAAT plate panels.

Izoplates panels – Video installation of the wall panels of the iSotex istex on the wall – installation of the istex panels.

Installation instructions – ISOTEX