Intra -floor water heating convectors

The heating system we choose is very important when it comes to keeping our homes warm and cozy. The use of intra-floor water heating convectors is one creative solution that has grown in favor recently. During the winter months, these systems provide a practical and efficient means of distributing heat throughout a room, keeping every part of your house toasty.

Since they are installed beneath the flooring, intra-floor water heating convectors are almost undetectable once installed. This not only frees up important space in your house but also gives you more creative freedom. These systems can be modified to work with a range of flooring materials, including carpet, tile, and hardwood, without sacrificing their functionality.

The capacity of intra-floor water heating convectors to deliver steady, even heating is one of its main benefits. These systems move heat up from the floor, in contrast to baseboard heaters or conventional radiators, which can produce hot and cold spots. By distributing heat evenly throughout the space, this radiant heating technique makes it cozier and more welcoming for you and your family.

Moreover, the energy efficiency of intra-floor water heating convectors is well recognized. They require less energy to operate at lower temperatures than other heating systems, which lowers utility costs and leaves a smaller carbon imprint. Furthermore, these systems’ consistent and soft warmth can aid in reducing common problems brought on by dry air, like respiratory disorders and skin irritation.

Advantages Efficient heat distribution, space-saving
Installation Embedded in the floor, requires professional setup
Energy Efficiency Lower energy consumption, cost-effective
Maintenance Low maintenance, durable
Cost Higher initial cost, long-term savings on energy bills

The intra -floor convector or its analogue is a warm floor, which is better?

When examining the characteristics of the room’s heating system, which consists of a warm floor and a convector, we can observe:

  • Water warm floors can work in a certain temperature and pressure range, which is difficult to provide in apartments with centralized heating. In high -rise buildings with a forced heating system, the pressure reaches 15 bar, which is unacceptable for warm floors – cracks may appear in pipes, leaks, and destruction of the flooring. Convectors in which the coil is made of a copper pipe, withstand such pressure for a long time and without destruction.
  • For installation of a warm floor, you need to observe the minimum and maximum length of the circuit, they cannot be mounted on a small area or separate interval, for example, in front of a window or balcony door. Convectors can be mounted anywhere.
  • Some types of sexual decorative coating are extremely susceptible to a common temperature difference, for example, a natural wood parquet when the underfloor heating is arranged in a couple of years, especially when connecting to a central heating with a coolant temperature above 40 degrees. Convectors are installed in those places where intensive heating is required, while the flooring in the rest of the room does not heat up.
  • When the convector fails, it can easily be replaced or replaced without opening the floors. With a warm floor, such an operation is impossible, you will have to dismantle it throughout the area of the room.

Because of all the features that have been mentioned, intra-sex heating convectors have become increasingly popular with city dwellers and private home owners. They can be installed in conjunction with traditional radiators or as stand-alone heating units.

Convector within the floor in front of the French window

The device and appearance of the intra -floor convector with the fan

Convectors are metal boxes or trays with coatings or anti-corrosion qualities that house heat exchangers made of copper coils with aluminum ribs to maximize the heat transfer surface. A fitting on the coil allows it to be connected to the heating system. A grill, which comes in various materials and styles, closes the box from above when paired with conventionally styled decorative flooring. The convector is installed levelly using adjustable bolts, which form the basis of the box.

Operating principle

The convector operates on a very basic principle: cold air from the floor surface enters the box, where the heat transfer of the coil’s aluminum plates causes the air to warm up. A fresh batch of cold air replaces the lighter, heated air that rises through the grill. The air surrounding the convector is consistently at a comfortable temperature because of this process. A fan is included in certain strong models, which forces the heat exchange rate to increase.

The intra-sex convector’s principle of action

Choosing the power of water intake convector

The selection of any heating device is based on its thermal power, or its capacity to keep the room at the desired temperature. Convectors are no different; you must determine their power before installing them. The computation bears minimal similarities to that of standard radiators. Execute it as follows:

  • Determine the size of the room and its area – the work of the parties, expressed in meters. For example, a rectangular room with sizes of 4×6 meters has an area of 24 meters of square.
  • Multiply the resulting area by 100 and receive the thermal power that is necessary for its heating, expressed in watts (W). For the above example, this value is 2400 watts.
  • The number of convectors is determined depending on the places of their installation. You can install them only in front of the balcony doors and supplement with radiators or perform all the heating of the room with convectors. For the room in question, for example, four Minib Coil-P80-2500 with a capacity of 650 W is enough for four intra-header convector of the brand.

Convectors with lower power outputs are preferable because passport features are intended for optimal heating system parameters, which are not always met in practice.

One crucial indicator is the convector’s power.

Installation of a water convector

  • Most convectors models have a thickness of no more than 10 cm, so they can easily be built into the final screed of the floor. Installation is carried out like this:
  • The intra -floor convector is placed on a black floor on top of the waterproofing in the place intended for it and fixed using corners and screws that are included. The corners are attached to the black floor with dowels and screws.
  • Align with the help of adjusting bolts its position. To do this, the bolts are screwed into the holes at the corners of the bottom of the box and, using the level, raise each angle to the desired height. The corner that fastens the convector to the floor allows this to do this due to the longitudinal hole.
  • Connect the convector to the heating system according to the selected scheme. Fitings are used for connection. Corresponding to the type of pipes used. Copper pipes are considered more reliable. Set the regulatory pressure of the servo on the tee attached to a straight pipe. Pipes extending from the convector and connecting it to the heating system are placed below the level of the screed and thermal isolated to reduce heat loss and to avoid overheating of the floor screed.
  • Put a heater, usually use polystyrene foam. Carry out reinforcement, after which they fill the screed, align and dry it. The convector box must be covered before this with a dense material that prevents from entering the solution.
  • Apply or lay the finish flooring. Install a protective grill on the convector.

Within the floor screed, a convector is placed.

Convectors can be installed in any space, including glazed loggias and terraces, because of their various sizes. You can create a heating contour along the glass walls by connecting multiple convectors in a sequential manner.

Convector installation and connection on a glazed loggia

Convector on glass loggia: completing the floor

In the video, the convector installation procedure is seen in great detail.

Video – Installation of the Varmann intra -floor convector

The way we think about home comfort has changed dramatically as a result of in-floor water heating systems. These systems generate a constant, soft warmth that radiates upward by using water to effectively distribute heat across the whole floor surface. Modern homes often choose this radiant heat because it is not only comfortable but also energy-efficient.

Convectors are an important part of the many parts of in-floor heating systems. Convectors for underfloor water heating are devices that move heat from hot water circulating in pipes beneath the floor to a room above. Because they are available in a variety of sizes and shapes, homeowners can select the one that best suits their requirements and tastes.

The efficiency of water heating convectors is one of their main benefits. They can contribute to lower energy consumption and heating costs by running at lower water temperatures than conventional heating systems. Furthermore, the uniform distribution of heat gets rid of drafts and cold spots, making the interior atmosphere more cozy and stable.

All things considered, it is difficult to find a better combination of comfort, effectiveness, and adaptability in heating options than in-floor water heating convectors. Considering an in-floor heating system with high-quality convectors can be a prudent investment in your home’s comfort and energy efficiency for years to come, whether you are building a new home or remodeling an old one.

Yes, the following is the main thesis statement for your "Intra-floor water heating convectors" article:Convectors for underfloor water heating are revolutionary for effectively maintaining a warm home. These systems, in contrast to conventional radiators, are positioned under the floor and provide heat uniformly throughout the space. By minimizing heat loss, this not only optimizes comfort but also conserves energy. Intra-floor convectors are a stylish, silent heating option that complements any interior decor thanks to their minimalistic design. For a comfortable and energy-efficient living space, these cutting-edge heating systems are worthwhile to take into consideration when building a new home or remodeling an old one.

Video on the topic

Waste of money? / Is it worth installing an intra -sex convector?

Intra -sex convectors: you can not put it, or you can? // Ecodom

The worst decision in repairs | Intra -polling convector | Repair of the quarter of St. Petersburg

Intra -floor convector here are his minuses!

Why it is impossible to install intra -sex convectors? #041

What type of heating you would like to have in your home?
Share to friends
Anna Vasilieva
Rate author
Add a comment