Insulation isover Technical characteristics

Insulation is essential for maintaining a comfortable and energy-efficient home. Isover insulation is unique among the many options available because of its superior technical capabilities and efficacy. Isover insulation is a top option for homeowners wishing to increase the comfort and efficiency of their living spaces because it features a variety of features that address the issues of temperature regulation, soundproofing, and energy conservation.

Isover insulation is designed to deliver the best possible thermal performance using cutting-edge technology. In other words, it lessens the need for expensive heating and cooling systems by keeping your house cool in the summer and warm in the winter. Isover insulation effectively blocks out unwanted warmth during hot spells and traps heat inside during cold seasons, creating a comfortable indoor environment all year long.

Isover insulation is great at controlling temperature, but it’s even better at soundproofing, which makes it perfect for making quieter, more serene living areas. Isover’s sound-dampening qualities can greatly improve the peace and quiet in your home, regardless of whether you live in a busy city or just want to reduce noise transfer between rooms.

The environmentally friendly design of Isover insulation is one of its main benefits. Isover puts an emphasis on both performance and environmental friendliness. It is made from sustainable materials and produced using environmentally friendly methods. You’re investing in a more sustainable future as well as your comfort when you choose Isover insulation for your house.

Isover insulation is also well-known for being long-lasting and simple to install. Isover’s user-friendly design makes it easy to handle installation tasks, whether you’re doing them yourself or hiring professionals. Isover insulation has long-lasting performance after installation, so you can enjoy years of increased comfort and energy efficiency.

Technical Characteristics	Insulation Isover
Material Composition	Mineral Wool
Thermal Conductivity	Low
Fire Resistance	High

Osover glass wool types and technical characteristics

Izover is made in a variety of dimensions for rolls, mats, and plates.

Glaud is derived, more rarely from the primary raw material used in glass production, from the remnants of the glass industry. The range of applications for glass water insulation is limited by certain limitations. The material’s technical properties make it impossible to operate in a humid environment without additional protection. This insulation dries poorly and absorbs moisture very well. Furthermore, the material loses its ability to act as thermal insulation when it becomes wet. As a result, you must use specific films that prevent moisture from penetrating the interior insulation. Reviews categorically attest to the material’s failure in the absence of steam and waterproofing.

Glaud is made in:

What distinguishes them from one another? Rolls are long, soft, rectangular pieces of insulation that are different from mats in length. Rolls are used to wrap mats as well, but they are also shorter and slightly denser. A roll usually contains two mats wound together. The plates come in rectangular packaging, are more dense, and do not roll up. Both internal and external works employ a variety of materials. Mineral-water inspection is complete – traits shared by all roles:

• Thermal conductivity coefficient – in the range from 0.037 to 0.044 W/m*C;
• The combustibility group is NG, that is, it does not burn;
• Moisture absorption is high.

Take a closer look at ISOVER insulation. Each species has quite different physical traits, primarily in terms of size and density.

Prior to insulating a panel house’s walls from the inside, it is more appropriate to think about doing external work with technology.

This article describes the technical features of Astratek’s liquid insulation.

Rolls

Sauna: 50 and 100 mm thick, foil-moped. used to provide interior warmth to the walls of various bath types.

Mats

Profi is a popular, all-purpose material that can be used both indoors and outdoors. 50, 100, and 150 mm thick. Traditional: 2 mat is muffled in the roll, with a thickness of 50 mm. used to insulate ceilings along crates, lag roofs, and floors. Options for thickness on the M37 frame are 40, 50, 60, 100, and 150 mm. In frame houses, it is used to fill the space between the strata. 50 mm thick, M34 frame is less dense than M37. Foil insulation in the M40al frame comes in thicknesses of 50, 100, and 150 mm.

Plates

Foil can be used to shield ISOVER from moisture.

The 50 and 100 mm thick ISOVER Minover classic slab is used to warm vertical structures both inside and outside the room. Raise roof: The display is mounted without the need for additional fasteners and is used to insulate the pitched roof and the attic from heat loss between the lags.

Soundproof materials measuring 50, 70, 75, or 100 mm in thickness are applied to both vertical and horizontal surfaces within buildings. The P32 frame comes in a variety of thickness options (50, 60, 65, and 100 mm) and widths (610 mm). used to fill the spaces between the walls of frame homes. Possible thickness options for frame P37 are 50, 100, and 150 mm. A choice of two widths: 610 mm and 565 mm.

Plastered facades are utilized in accordance with wet facade technology for external wall insulation. According to the technology of the ventilated facade, the top layer, which is only 30 mm thick, serves as the upper layer for two layers of external wall insulation. In two-layer pies of ventilated facades, the bottom layer of insulation, known as ventfasad (bottom), has a thickness of 50 and 100 mm. At 0.032 W/m*from, Ventfasade Optima has the lowest coefficient of thermal conductivity. Plunges beneath the screed, Ol-p. Ol-PE and Ol-Top are used as the lower and upper layers, respectively, for insulation on flat roofs.

This is one of the most well-known brands of ceramic thermal insulation of corundum, whose technical qualities enable you to use it in many areas.

In addition, the actor’s insulation is also required. Continue reading.

Dimensions, density and types of insulation

When applying a material under specific circumstances, its density may be very important. For instance, the least dense insulation, which has an indicator of 28–38 kg/m3, can be used for both walls and facades, while the dense insulation, which has a density of 120–160 kg/m3, is used for the roof. The density of Izover for the floor is 150–165 kg/m³.

Depending on the extent of use, the material’s size and release method can differ significantly. For instance, rolls of foil that is resistant to moisture in wet rooms can be produced with a thickness of between 50 and 100 mm, and the length of the loose roll will not exceed 1.25 meters. The material for universal insulation is precisely cut and processed, and the size of the plate is chosen based on the size and area of the surface to avoid allowing a significant amount of waste. The material can have a thickness of up to 100 mm.

What is a heater isover

Mineral wool is a fibrous material that is manufactured into mats, rolls, and plates to serve as insulation. Glass fibers have a thickness of 4-5 μn and a length of 100-150 μn. You don’t need to be concerned about the material’s environmental friendliness because it is made entirely of natural materials.

Plates can be semi-timed and quite rough. When working internally or organizing facades, the insulation is installed both horizontally and vertically.

Izover

It is composed of glass and quartz sand. Limestone, drill bits, soda, and other ingredients can be added to the material to enhance specific qualities. A unique bunker covers the entire mass. Melting the ingredients takes place there. As soon as the расплавленное стекло leaves the body, нити образуется благодаря раздувания паром. The aerosol-impregnated threads align and create a carpet when it hits the rolls. The polymerization process then starts at +250 ° C. The material is cut into slabs, rolls, and mats after it cools.

The main characteristics and features of the heater of the isover based on fiberglass

Izover insulation is an elastic, long-lasting material with a strong resistance to heavy loads. This kind of product is produced using cutting-edge, patented Tel technology. Fiberglass is used in the main component.

There are a few fundamental features of the isover heater that stand out:

The thermal conductivity coefficient. The specified value is -0.038 W/(m*k) (watts per meter-kelvin, or W/W) in the international system of units (SI) for specific thermal conductivity. Owing to its extremely low value, the fiberglass included in the insulation effectively manages air quality and thermal preservation.

Qualities that reduce sound. You can achieve the highest level of noise protection thanks to the air layer that develops between glass fibers.

The material’s combustibility. Every product in the thermal insulation line is a unique check. Goods falling under the category of NG, or non-combustible building materials, have a density of less than 30 kg/m³ (combustibility tests were conducted in accordance with GOST 30244–94). This implies that it is totally safe to use isuver insulation for thermal insulation in either a large, industrial building or a private residence.

Moisture resistance and vapor permeability. These parameters are very important, because the ability to resist the effects of moisture depends on how well the material will perform its main functions. With wet air in the room (and for residential buildings and normal human well -being, this indicator should be at least 40%), the fiberglass that is part of the heat -insulating stoves/rolls of the isover can slightly worsen its thermal protection properties. So that this does not happen, it is necessary to leave a small distance between the wall and the insulation during installation (about 2 cm). Since fiberglass can quickly “give” excess moisture, this air gap will help to avoid its accumulation in the material.

It should be noted that the insulation is made up of hydrophobizing additives with water-repellent properties.

Crucial! Thermal insulation qualities rapidly deteriorate if there is at least 1% moisturizing insulation.

Lifespan. Building a house is a difficult, drawn-out process that demands close attention to the quality of the building materials. Insulation covers not only the features of thermal protection but also the life of the service because it refers to materials whose replacement is highly labor-intensive and expensive. There are instances where isuver has been used for fifty years without losing its ability to insulate against heat.

Safety in the Environment. Izover products are made of environmentally friendly heat-insulating materials whose safety for human health has been established and documented. Anyone can freely review the products’ environmental product declaration (EPD) on the manufacturer’s official website. Furthermore, neither mold nor insects will ever be used in the creation of isuver.

Mass. Compared to many other comparable materials made by other manufacturers, isolate weighs less. In buildings where it is necessary to lessen the load on the walls and other floors, this feature permits the use of isuver in rolls or plates.

Form for product release. The manufacturer provides the customer with a range of release form options, including slabs and rolls of material with varying degrees of stiffness. Furthermore, the insulation can be either single- or double-layered, with a minimum thickness of 5 cm in each layer, with a thickness ranging from 5 to 10 cm.

Plates are typically one meter wide and one meter long. Nonetheless, these parameters can be altered upon the customer’s request.

The rolled heater’s standard measurements are 1.2 meters wide by 7–14 meters long. 16 to 20 m² is the total area. You have to wait a few minutes after opening the packaging for the material to fully and independently straighten.

Specifications

Has a great deal of benefits. Because of them, he currently holds the top spot among all other heat insulators.

Consider the following technical aspects of the isover when making your selection:

1. Izover – This is a thermal insulation material, so it is characterized by low thermal conductivity – 0.038.
2. Great soundproofing indicators.
3. For the manufacture of insulation, fiberglass was used, which are not afraid of bacterial or fungal damage. It is not amenable to the influence of rodents and small insects.
4. High moisture permeability. This indicator is a disadvantage. This is explained by the fact that the material has a porous structure.
5. Small specific gravity – 13 kg/m3. Thanks to this, the process of installation, transportation and loading of the material is simplified. Installation of insulation can occur with your own hands.
6. Environmental purity.
7. High degree of resistance From the negative effects of chemicals.
8. High plasticity. Mats can be compressed up to 60%, and rolls up to 75%.
9. Fire resistance.

Read up on the advantages of Polynor sprayed insulation as well.

The heater’s technical specifications are covered in the following video:

Regarding the size of the overflow material, that is contingent upon the mode of distribution. There is a 5.10 cm thickness option for the math rolls—a single layer. Moreover, one layer’s thickness for a two-layer system is 5 cm. The typical width and length for a roll type are 120 cm and 7–14 cm, respectively. However the wrapped area varies between 16 and 20 m^2.

This article tells you which insulation to choose for your roof and what kind it is called.

To find out how to insulate a private home’s interstory ceiling, click the provided link.

This article, however, provides information on the type of insulation that should be used for ventilated facades: http:// Resformbuild.ru/Paneli/Utepliteli/Dlya-Wentiliruemyx-Fasadov.HTML

It might be of interest to you to know about that as well.

The scope of isover

Due to its superior thermal insulation qualities and efficient noise absorption, ISOVER is a material that is perfect for roofing and building structure decoration. These features are particularly valued in the north, where installing a heat insulator can reduce energy costs for heating and air conditioning residential buildings by up to 50%.

The installation of the heat insulator is not restricted to the local climate; because of the unique mineral fiber structure, ISOVER has shown excellent performance in both northern and southern latitudes. As a result, buying in Moscow is a perfectly reasonable option. Low heat conductivity, strong moisture resistance, ergonomic design, fire resistance, environmental safety, and several other benefits are the heat insulator’s primary benefits.

Thermal insulation material ISOVER has a service life at least 50 years, and really the material can work much longer. The insoure spent on the installation of funds spent on the installation of the funds for a short time is compensated by coziness and warmth in the house, as well as significant saving funds to pay for heating.
Choose thermal insulation of isover – excellent quality and time -tested brand! Only the most favorable prices for insulation of world significance! Call right now on the phone 8 (495) 374-57-76 And you will receive tips from professionals in choosing and individual calculation of the number of thermal insulation for your object! In addition, the team of experienced workers will perform installation with a guarantee of up to 5 years!

Rolonnoye and tile heater ISOVER

In order to be used for insulating building facades, floors, walls, and roofs, ISOVER is produced in both rolls and plates. Stone fiber or fiberglass—different types of mineral wool—is used to make it. The application of unique, patented Saint-Gobain Tel technology is primarily responsible for the technical and operational characteristics of insulation, giving the finished product the following attributes:

• high thermal insulation indicators;
• excellent soundproofing properties;
• the service life of 3-5 decades;
• resistance to the appearance and development of mold and fungus;
• Light weight.

It should be noted that while ISOVER heaters retain their thermal insulation properties, they will absorb water and dry quickly (assuming adequate ventilation).

The form of the release of insulation

Numerous businesses produce material in multiple forms to increase its ease of use. It comes in rolls, plates, and mats, each of which has a unique structure and stiffness for insulating a building’s exterior or interior wall surface. The cost also varies based on the type of material chosen.

Additionally distinguished between two and single layers of isover. The thickness in the first instance is between five and ten centimeters. Since the dimensions of one layer in this case are approximately 5 centimeters, the thickness of the two-layer material is not that different. There are variations to the insulation on sites or by dealers, but generally speaking, plates can be one meter. This is a standard that is prevalent in the construction industry.

A heater roll is over 16 to 20 square meters in size, which is sufficient. The roll’s length can range from 7 to 14 meters, and its width reaches 1.2 meters. Naturally, the choice of material size will have a slight impact on the technical characteristics.

Characteristics

The density of a material, which is based on its weight per cubic meter, is one of its primary properties. The density of minvata, when used in rolls for insulating frame structures, is 11 kg/m3.

The ISOVER SURCH FARCH has a volumetric weight of 12-35 kg/m3 in plates and mats for frame structures. A material with a density of more than 50 kg/m3 is used for the facade, roof, and floor insulation.

The isover has very low thermal conductivity. It ranges from 0.033 to 0.093 W/m*K*, depending on the kind of material. Because this indicator doesn’t change over time, you can keep the room warm for the duration of its useful life.

All fire safety regulations are met by this insulation since it is made of non-combustible materials. He has the ability to compress, making travel easier. Up to 60% of the mats can be compressed, and up to 75% can roll. The material has a 50-year lifespan.

The roll’s standard dimensions are 7–14 meters in length and 120 cm in width. Either 5 or 10 cm can be the thickness. There are two-layer models (layer thickness of 5 cm) and single-layer models. Typically, plates are made in 120*60 cm sizes.

Crucial! Technically speaking, the insulation’s steam capacity ranges from 0.5-0.55 mg/mchpa. The material’s thermal insulation qualities will be greatly reduced in the event of moisture buildup.

10 main advantages of heater isover

• Affordable cost material that makes it possible to buy isover thermal insulation even with a fairly limited budget-the loyal pricing policy of the French concern "Saint-Goben" will allow this to do this!

• Izover insulation Widely used In the main construction and repair technologies.

The company offers two primary product categories: construction and technical isolation, which are produced as panels and mats.

• The thermal conductivity of the thermal insulation ISOVER, the price of which will be as beneficial for you, ranges between 0.036-0.041 W/m · K – this indicator allows you to achieve an excellent insulation result! You Guaranteed Get the effect that you expected!

• Thanks to improved technologies and their own developments, ISOVER manufacturers have established the production of materials with Unique combination consumer and technical indicators.
• The ability to use in the temperature range from -60 to +50ºС Allows you to buy a heater of isuver and other thermal insulation of the brand for insulation of industrial facilities.

The density of ISOVER heaters varies from 11 to 140 kg/m³; a material that is appropriate for a given situation can be selected.

• Thermal insulators meet all the requirements of the European Standard EN 13162, the international standard ISO 9001 and the branded standards "Saint-Goben". Durability and Operation safety ISOVER insulation, which anyone can buy, is confirmed by the leading Research Institute of the Russian Federation.
• If you correctly fulfill all the conditions for the installation technology of insulation, you can be sure that it will serve you At least 50 years – His high quality will delight you for many more years!
• The popularity of the material Simple installation technologies contributed to: the insouverer insulation is easily cut and, if necessary, can be installed by the homeowner on its own.

Take note! The only company using the newest patented Tel technology to produce products is Saint-Goben; contemporary thermal insulation does not use any comparable technology! Izover is produced with only natural materials, top-notch machinery, and knowledgeable staff—this is the key to its success!

• Thermal insulation isover, the price of which is the best in our price, in any of the forms of release PERFECT Suitable for . Please note that when cutting thermal insulation, the width of the product should be 1-2 cm more the distances between the walls of the frame – for the effective installation of the display.

Brands

The several dozen thermal insulating products made by ISOVER are intended to address specific issues. They are all different in terms of size, density, thickness, and mode of delivery.

Note that all brands are interchangeable because they share a common foundation.

For public work

Izover Expert. The universal material is more elastic. outperforms other retail materials in terms of thermal protection.

It comes in rolls with plate thicknesses of 50, 100, and 150 mm. can be installed and doesn’t require any additional fasteners. received favorable feedback from builders.

It serves as soundproofing and insulation.

• external walls from the inside and outside the house;
• Naught roofs;
• inter -story ceilings;
• frame walls;
• internal partitions;
• ventilated facades.

Traditional. supplied in rolls with a 50 mm material thickness. The conflict has the ability to install it.

• insulation of suspended ceilings;
• Inter -story ceilings – the material lies between the lags;
• attic premises.

Izover’s traditional slab. Minvata shape: a dish. Dimensions: 610 x 1170 mm x 50 & 100 mm thick. Within 5 and 10 m2 packaging.

• insulation of frame walls;
• wall insulation from the inside;
• insulation of ventilated facades.

KL 34 is Izover. The release form is a plate that is between 5 and 10 cm thick. doesn’t require more fasteners to be installed.

• ventilated facades;
• frame walls.

Izover KL 37: Plate as the output form. It is applied to inter-story floors and roofs to provide sound absorption and insulation.

Izover 40. a roll of two layers. 10 cm in thickness, with 5 cm in each layer. It is applied to horizontal plane insulation.

Sauna, sauna. Rolls with matte thicknesses of 50 and 100 mm are available. The presence of a vapor barrier layer is the primary characteristic. Ideal for extremely humid rooms. covers materials that are moderately flammable. In saunas and baths, it is used to insulate the ceiling, walls, and floors.

Superior Izovever. Only available in Siberia and the Far East is the Universal Min Vata.

Special solutions

In the isover product line, there are specialized insulation options with features tailored to address particular issues.

1. Izover is a pitched roof. It has increased moisture resistance.
2. Sound protection. Provides a high level of noise protection.
3. Frame P32. Designed for insulation of frame houses. Ensures the savings for heating up to 25% compared to the base product.
4. Frame M40-AL. Min cotton wool with one -sided aluminum coating. Intended for wet rooms, can be used without additional finishes.
5. Izover is a plaster facade. High density material, has low vapor permeability.
6. Front Fasad Verkh and Brid Facade bottom. Used for two -layer insulation systems of ventilated facades.
7. Floating floor. Designed for insulation and sound insulation of the floor. Has increased elasticity and density. Made using Ship-Paz technology.
8. Izover Ol-P. Special solution for flat roofs. Has ventilated grooves for moisture. Made using a spike-paz technology, which increases the tightness of a layer of a cotton wool.

Which is better, isuver or rockvol

Customers are curious about which insulation brand to choose because these companies are direct competitors in the construction industry. It should be made clear at the outset that while both heaters have similar features, different technologies are used in their production.

One French company produces ISOVER, mineral wool based on fiberglass. Polish-made basalt wool is known as "rockwool." Since basalt rocks are the basis for the second insulation, glass is totally eliminated during the production process. Polish goods are therefore regarded as being more ecologically friendly.

There is no definitive answer to the question of which insulation is better; it all depends on the application. Specifically, the "isover" performs better in terms of insulating first-floor surfaces, non-residential roofs, balconies, and loggias.

This is because failing to use the installation technology correctly can cause tiny glass particles to fly into residential buildings’ air, potentially having a negative impact on people’s health. Rokvul is ideal for internal wall partitions and interstory walls since it is not afflicted with any such "disease."

Remember that ISOVER is significantly less expensive, which is a deciding factor for many people when selecting a heater.

Characteristics and scope

The material has a high density, elasticity, heat efficiency, and light weight. It comes in rolls and plates. relates to materials that are not combustible.

In the mineral insulation market, URSA, Izovol, Rockwell, Park, and Knauf are the primary rivals. Furthermore, Minvata has many uses in public service. Under the direction of ISOSETE, the company produces insulation for industrial use.

Izover is employed in the following categories of tasks:

• thermal insulation and sound protection of the external walls;
• roof insulation;
• ventilated facades, multilayer walls;
• for sound insulation of internal partitions;
• in industry – for insulation of pipelines, ventilation, etc.D.

Izover has benefits and drawbacks just like any other insulation.

The benefits of isover consist of:

1. Convenience of transportation and storage-the manufacturer compresses the insulation 5-6 times when it is packaged. Izover 100% restores shape.
2. Products of products with different technical characteristics are designed for different areas of construction. For example, ISOVER SUBLECTION or ISOVER NACK ROUL.
3. High elasticity. The insulation exceeds other mineral wool in this indicator, thanks to the special Tel technology, according to which it is produced.
4. High energy efficiency – 5 cm mineral wools are equal in thermal conductivity of 1 m of brickwork.
5. Refers to non -combustible materials. The use of mineral wool for thermal insulation of the house does not increase the class of its fire hazard.
6. Noise protection. Due to the fact that there is air between the fibers of the insulation – it poorly misses sounds.
7. The warranty life of 50 years declared by the manufacturer.
8. Resistant to biological and chemical effects.
9. Light weight-28-60 kg/m3.
10. It is convenient to work. To insulate the surface, you just need to roll out a roll.
11. Does not shrink during use.
12. Environmentally friendly material. The holder of Ecomaterial Absolute Ecomaterial and Certificate of International Ecological Management ISO 14001: 2004.
13. Heat -resistant.
14. High rates of density and rigidity, which allows you to mount the insulation without additional fasteners.

The following are some drawbacks of the isover:

1. The soft structure of cotton wool limits the scope of its application.
2. It absorbs moisture well. When installing, a ventilation gap is required. If you do not make it, cotton wool can be nourished with moisture and lose its technical characteristics, and even completely freeze in winter.

It’s crucial to understand that wearing personal protective equipment during installation is required because the dust from the fibers of mineral wool is extremely caustic and can irritate skin and eyes.

Varieties of thermal insulation

Isover Insulation offers a variety of products. The range of application is defined by the unique qualities of each variety of the material produced. Specifically, the market offers the following categories of insulation:

• Profi.
• Classic.
• Classic slab.
• Sauna.
• Optimal.
• Extra.
• Naughty form.
• Ventfasad.
• Plaster facade.
• Floating floor.
• Soundproofing.

The label that is present on the packaging indicates the fundamental features. This is how it appears:

1. Ol-E. The only material in the series that is used for external work. The material has high density and incorrect structure.
2. KL. Soft plates designed to insulate internal partitions and ventilated facades.
3. Al. The insulation with such a marking has a layer of aluminum foil on the surface, which performs the function of vapor barrier.
4. Kt. This is a roll insulation used to isolate large areas.

With these features in mind, selecting a heater to address particular building issues is simple.

Technical characteristics of the insover -based insover -based insulation

The widely used and universal ISOVER heaters made of quartz are listed below. Every model has unique traits and benefits in various application domains. You can quickly ascertain which insulation is more appropriate for your circumstances by using a visual table.

ISOVER WELL HOUSE

It is advised to be used for:

• Overlap over the basement
• Thermal insulation of the sexes at home
• Floors in lags

A heater that has a thickness of 100 mm is appropriate for:

• The outer side of the walls for siding

Technical characteristics "Izover Warm House":

Technical characteristics of insulation	Options
Thermal conductivity at λ10	0.040 W/(m*K)
Group of combustibility	NG

Thickness in mm	Length in mm	Width in mm	Volume in m3	Square in m2	Top in the pcs.
50	5490	1220	0.67	13.4	2
50	5490	1220	0.85	17.1	2

ISOVER Warm House Plate

It is advised to be used for:

• Interior walls
• Thermal insulation of floors in lags
• When choosing a heater with a thickness of 100 mm is suitable for:

• Frame walls outside

Technical characteristics "Izover warm house of the stove":

Technical characteristics of isover	Options
Thermal conductivity at λ10	0.038 W/(m*K)
Group of combustibility	NG

Thickness in mm	Length in mm	Width in mm	Volume in m3	Square in m2	Top in the pcs.
50	1170	610	0.5	10	14
100	1170	610	0.5	5	7

ISOVER Warm roof

It is advised to be used for:

• Roofs, attics, attic, pitched roof

Adequate for usage:

• Wall insulation outside and inside
• Floors in lags

Technical characteristics "Izover warm roof":

Technical characteristics of insulation	Options
Thermal conductivity at λ10	0.037 W/(m*K)
Group of combustibility	NG

Thickness in mm	Length in mm	Width in mm	Volume in m3	Square in m2	Top in the pcs.
50	5000	1220	0.61	12.2	2
150	4000	1220	0.73	4.88	1

ISOVER Warm walls

It is advised to be used for:

• The outside of the walls of the house
• Internal parts of the house
• Thermal protection of balconies and loggias

Adequate for usage:

• Roofs, attics, attic, pitched roof

Technical characteristics "Izover warm walls":

Technical characteristics of insulation	Options
Thermal conductivity at λ10	0.036 W/(m*K)
The vapor permeability of the insulation	0.7 mg/m*h*PA
Group of combustibility	NG

Thickness in mm	Length in mm	Width in mm	Volume in m3	Square in m2	Top in the pcs.
50	1170	610	0.5	10	14
100	1170	610	0.5	5	7

ISOVER is a quiet house

It is advised to be used for:

• Suspended ceilings
• Internal walls and interior partitions
• Attics and pitched roof
• Overlaps and floors in lags
• Attics and pitched roof
• Floor insulation and basement

Technical characteristics "Izover Quiet House":

Technical characteristics of insulation	Options
Thermal conductivity at λ10	0.038 W/(m*K)
Noise soundproofing level	54 dB
Group of combustibility	NG

Thickness in mm	Length in mm	The width of the VMM	Volume B, m3	Square in m2	Top in the pcs.
50	1170	610	0.5	10	14

ISOVER SANE

For rooms with high relative humidity, we suggest:

Technical characteristics of the Sauna Suna:

Technical characteristics of insulation	Options
Thermal conductivity at λ10	0.041 W/(m*K)
Water absorption of insulation	1 dB kg/m2
Group of combustibility	NG

Thickness in mm	Length in mm	Width in mm	Volume in m3	Square in m2	Top in the pcs.
50	12500	1200	0.75	15.0	1

The use of mineral wool isover in construction

Mineral wool rolled up is no longer

ISOVER KL34 It is used to warm structures that are inclined, vertical, and horizontal in plates that have a thickness of 50 or 100 millimeters. It is not required to use the additional fasteners because the slabs are securely mounted between the guides.

ISOVER KL37 It is used to warm roof slopes, house facades, and floor surfaces in compressed packages. It is not necessary to use extra fasteners during installation. When laying insulation, rolons and plates must be firmly pressed against the processed surface.

Rolls of ISOVER KT37 are used for horizontal surfaces and can be installed without the need for fasteners. Used for gable roofs, flat roofs, and interstory ceilings. The roll and the insulated surface should fit snugly.

Heating of the home’s walls using mineral zero

Rolls of ISOVER KT40 with two 50 millimeter layers. The material is applied to horizontal surfaces, such as floors and ceilings, just like URSA GEO. The roll can be split into two layers if needed; a layer of five centimeters should be sufficient.

STYROFOAM ISOVER 300A It should be laid with extra fasteners in the shape of hard plates. Extruded polystyrene foam is a component of the plates, which greatly improves the insulation’s strength and resistance to moisture.

Ventiterm ISOVER To improve the plates’ resistance to moisture, a hydrophobisator is applied. Use in the construction of water supply, ventilated facades, and thermal insulation for ventilation systems. Fasteners are employed flexibly during installation.

Attic house insulation using Overnight Minvata

ROULING NAME ISOVER It is made in the form of 50- and 100-millimeter-thick plates for use as roof thermal insulation. The Izovever Ralm roof retains heat perfectly and hardly absorbs moisture. Slabs of insulation are typically laid in two layers.

An ISOVER Ventfasad two-layer version is produced. Foil plates shouldn’t lag in from the treated surface during installation. has long been in the lead and established itself only from the best angles.

ISOVER Audio safeguarding provided in mats and plates forms. The living room is better shielded from unsightly noise from the street by these ISOVER products than by other changes. utilized to insulate interior partitions and ceilings.

Because of its superior technical qualities, Minvat Isover is frequently utilized in contemporary architecture. The material comes in a number of varieties that allow you to warm different areas of a design independently, such as the attic for the winter or the walls of the facade for siding or the floor of a wooden house. Every type of ISOVER is intended for a specific purpose in terms of thermal insulation of buildings.

What you need to know when choosing insulation

Thermal conductivity (λ) coefficient

Prioritizing thermal insulation products requires careful consideration of indicators like the thermal conductivity coefficient, or lambda (λ). Because the value of thermal conductivity represents the amount of heat that passes through the insulation per unit of time, a smaller lambda indicates better home insulation.

A measurement of thermal conductivity is WT/(m*K). (W/m on a Kelvin scale)

Types of thermal conductivity coefficient (λ)

The manufacturer installs a dry lambda at the factory, and its value is λ10, which is the heat conductivity coefficient measured at 10 °C. the indicator that the producer has stated.

Wet lambda (installed at different humidity levels by the manufacturer): • Thermal conductivity coefficients (λa and λb) for various operating conditions (SP 50.13330.2012). Licenced laboratories with 2% and 5% moisture content are used for measurements. In construction, the coefficient is utilized in heat engineering computations.

Select insulation based on thermal conductivity; the more effective the insulation, the lower the coefficient of return for the house. For instance, 50 mm of thermal protection will be sufficient to replace 95 cm of brick if the thermal conductivity value is 0.036.

Which insulation to choose: in plates or rolls?

Because of the high elasticity of all ISOVER products, the material is held firmly and steadily without the need for additional fasteners. Rolls and plates are employed in various designs. The shape of the room dictates the form.

Rolls for warming

• Convenience when warming large areas of the surface, ease of installation due to the fact that one roll can insulate a large area of the house.
• When used, fewer joints appear, and therefore, the cross -country ability of air flows decreases.
• Small material consumption.
• Suitable with a non -standard strip of rafters, ease in cutting to the required width.
• The display is fixed without the use of additional fasteners.

Plate insulation

• Recommended for insulation of small rooms.
• Approach when working for one person.
• The display is fixed without the use of additional fasteners.

The use of isuver, its specificity and varieties

Since wall partitions account for approximately 40% of a building’s heat loss, sealing off "weaknesses" with high-quality insulation—as long as all installation guidelines are followed—guarantees that heat will be conserved inside the home. Therefore, investing in more costly and dependable insulation will result in additional savings for heating every building during the winter.

Customers are invited by the manufacturer to select the best insulation from a variety of types that can be categorized based on the area of application.

Izover’s thermally insulated areas include:

• roofs and ceiling floors;
• external walls;
• internal, interior partitions.

Additionally, the range of products is extensive.

Izover KL-34

A slab of this kind, however, can have a thickness of five or ten centimeters. It can be used to insulate any kind of plane, whether it be inclined, horizontal, or vertical. Extra mounting components are not needed because of the snug landing on the frame. KL-34 slabs frequently have separate ventilated facades.

Izover KL-37

Fiberglass-based soft heat insulation is intended for use in structures without heavy loads on the insulation. It’s interesting to note that the packaged material is compressed twice more; this lowers the overall volume and, consequently, lowers the cost of delivery. Similar to the earlier version of insoure insulation, KL-37 requires no extra mounting components. But keep in mind that while installing, you must pay attention to the condition and aim for the tightest possible fit between the plates and the surface.

Izover KT-37

Utilized for inter-story flooring, roofs, and attic spaces as insulation. The fact that it is rolled material is the primary distinction from the KL-37. The remaining traits, as well as installation and operation suggestions, align.

Izover KT-40

Unlike other products, this type of material is supplied in rolls and is composed of two layers, each measuring five centimeters in thickness. If the installation is done in a wooden or metal frame with 60 centimeters between the racks, KT-40 will be the best choice.

Izover Styrofoam 300a

Produced using extruded polystyrene foam in the shape of plates. Fasteners are required to be used with this material. Styrofoam 300A plates have higher heat and moisture protection indicators than many similar goods because of their unique composition. Thermal insulation for walls, floors, and flat roofs is one application for this kind of Izover insulation. It is acceptable to put plaster directly on top of the plates.

Izover Ventiterm

Insulation made of mineral wool and basalt fibers. This material’s versatility stems from the fact that installation can be done with or without fasteners. Experts have known for a long time that this insulation is useful for isolating ventilation and water systems.

Izover is a pitched roof

The purpose of the specially designed rain is to safeguard the roof. Because of its capacity to absorb outside sounds, this kind of insulation not only helps to retain heat but also fosters a calm and quiet environment. Good vapor permeability indicators and the material’s non-combustibility should also be considered positive attributes. It is important to keep in mind that the rafter system’s step needs to match the size of the insulation plates.

Izover sound protection

The Izover Sound Protection mats and stoves are designed with the express purpose of alerting users to the potential for outside noise to seep in. Installation can be done in suspended ceilings or internal partitions.

Sauna Sauna

Encourage the sauna’s insulation. This material is perfect for installation in baths, saunas, and high-humidity rooms because it not only possesses all the attributes of superior insulation but also creates a barrier for steam. The matte material comes in rolls and has a thickness of 5 or 10 centimeters.

The manufacturer of thermal insulation materials, Izover, created and presented a line of goods with the purpose and area of application clearly stated in the title to make it easier for customers to search for and choose the desired product:

• Izover is a warm house.
• Izover is a warm roof.
• Izover warm walls.
• Izover is a quiet house.

In the world of home heating and insulation, understanding the technical aspects of insulation materials like Isover is crucial. Isover offers a range of products designed to enhance the energy efficiency of your home, keeping it warm in the winter and cool in the summer while reducing energy bills. Its technical characteristics include high thermal resistance, excellent soundproofing properties, and ease of installation. With Isover, you can improve the comfort of your living space while also contributing to environmental sustainability by reducing energy consumption. Whether you"re insulating walls, floors, or ceilings, Isover provides reliable solutions that prioritize both performance and ease of use, making it a top choice for homeowners looking to upgrade their insulation.

Basalt insulation

Under the Izover stroke, basalt insulation made of stone fibers is created in addition to fiberglass plates.

Technically speaking, basalt wool differs primarily in:

• higher price.
• Basalt cotton wool is more durable.
• stronger and denser than glass wool.
• Less elastic, more broken.
• higher moisture resistance and heat resistance.
• Available in plates.
• less compression – transportation costs more, takes up more space in storage.

Expert Council: It is advised to use basalt insulation in locations with higher loads, t.To. It is higher in him.

The line of this mineral wool actually doesn’t differ all that much from the fiberglass-based materials:

• ISOVER Optimal. Supplied in plates with a thickness of 50 and 100 mm. Designed for insulation and sound protection of the pitched roofs and ceilings.
• Light. Intended for frame structures, has increased elasticity. Mineral wool is supplied in plates with a thickness of 50 and 100 mm.
• Acoustic. Sound absorption of class "a".
• ISOVER RUF V, Ruf n. Designed for a flat roof.
• ISOVER Flor. It is supplied in plates with a thickness of 30, 40 and 50 mm. Reduces shock noise to 35 dB.
• ISOVER PLAST. Used for plastering facades.
• ISOVER FASAD MASTER. Used for insulation of plastering facades. The thickness of the plates is 30, 50, 100 and 150 mm.
• Venta. It is characterized by increased vapor permeability.
• ISOVER standard. Used in multilayer masonry.

It is impossible to determine with certainty which type of insulation is superior: glass wool or stone. Each type has benefits and drawbacks; the decision is based on the requirements and usage circumstances of the insulation.

Izover is currently the most widely used mineral wool in the home building materials industry. Because of its wide selection of products, excellent quality, and reasonable cost, customers give it the highest ratings. Among rivals, he offers the best price-quality ratio, in the opinion of many builders.

Watch this video to learn more about the benefits and features of the insouvets:

Technical characteristics of the insulation insulation

Technical insulation features are not limited to their beneficial effects on thermal insulation. Secondary benefits include things like insulation weight, environmental purity, and service life, all of which are important during installation.

1. The service life of the insulation – This is one of the most important factors, the insulation can last for 50 years and at the same time not to deteriorate the thermal insulation properties of the material. Surely no one will use the material that the year will last, because the installation of insulation is still not an easy job, and therefore, according to these criteria, the remaining models.
2. Many buildings require insulation, but also have to follow and for environmental norms, Using one or another insulation. Many heater are simply not suitable because of their low environmental aspect, and therefore most often when warming residential buildings, kindergartens, hospitals and many other state institutions use it. The material passed a lot of inspections, including at the Institute of Cancer Diseases, where he received a certificate of safety of use.
3. The weight of the material is quite small, so the isvel can easily be used on buildings, which, to put it mildly, have already outlived their years. The walls of many buildings may simply not withstand the load, but when using the insulation, the walls will actually not feel additional load.

Briefly about the manufacturer

The Saint-Goben Industrial Companies Group is the trademark holder of ISOVER, as was previously mentioned. The company was founded 350 years ago, and its main office is in Paris. There are representative offices for the company in 67 different nations. Saint-Goben also manufactures insulation under the ISOROC and ISITEC brands in addition to ISOVER.

Businesses in Russia can be found close to Moscow in Yegoryevsk and Chelyabinsk. Products are made using the original technology, must comply with GOST standards, and must be certified to the international model. It should be mentioned that businesses started a production line in 2013 to produce basalt wool under the same name brand.

Installation

We will become familiar with the characteristics of installing building materials on various residential building components.

Roof

Crucial! The insulator canvases need to be positioned over a 10-cm distance along the roof’s slope, beginning from below.

The following steps must be taken in order to install mineral wool on the work’s roof:

1. Installation of vapor barrier from the inside of the roof.
2. When using roll insulation, you need to cut off pieces equal to the slope of the roof and lay them between the rafters.
3. Minvata slabs are laid back to each other, since the quality of thermal insulation depends on it.
4. Laying a waterproofing membrane. It must be placed with some hanging between rafters.

Crucial! The width of the plate must be 2-3 cm greater than the space between the rafters in order for ISOVER to be laid hermetically.

Facade

Mineral wool is used in sheets measuring 60*120 or 100*120 cm to insulate the facade. Using Izover Standard is possible. The ideal layer thickness for a continental climate with moderate temperatures is roughly 10 cm. In regions with harsher winters, 15-piles are utilized.

The following phases are included in installation work:

1. Installation below the walls of the profile with a width equal thickness of the cotton wool.
2. Installation of cotton wool slabs to each other using special glue applied to 6-9 points. Check the evenness of the walls using the level and the rules.
3. Each plate is fixed with “fungi” or “umbrellas”.
4. This is followed by work on the installation of corners, reinforcing and applying decorative plaster. Another option – siding or brick cladding.

The characteristics of the isover

What makes the material so warm is a simple air property positioned in the closed space between the fibers, which provides the minimum heat losses. Izover’s manufacturer states that it is completely safe for human health and that it can also be used as a sound insulator. It can be utilized for interior room insulation in residential buildings, including children’s rooms, in addition to exterior facade insulation.

Since moisture buildup in the material’s structure results in a loss of thermotechnical properties, the material’s vapor permeability is also crucial. However, experts advise leaving at least 2 cm for adequate ventilation when insulating the facade, basement, and foundation. The material is impregnated with hydrophobisators for water-altitude, ensuring the absence of biological threats in addition to moisture. As a result, the 50-year service life is guaranteed by the manufacturer.

Areas of use

Furthermore, cotton wool made of mineral basalt is very well-liked for its thermal insulation. All items used for industrial and civil purposes are warmed by it. Its use almost never has any contraindications. There are four different ways to install something:

• On a metal frame,
• On a wooden frame,
• On a bracket fasteners
• On the basement.

It is imperative to select the best method based on the features of the product; this is especially true for selecting its size and typical modification. It’s also advisable to speak with the manufacturer. Unexpected events such as the rejection of a multi-layer insulation or stabbing of specific areas, as well as air layers occurring inside the sandwich and cold bridges forming, can result from an unprofitable method.

Drawbacks of mineral wool

There are drawbacks to any material, no matter how flawless and technically sound it is. You can mention the one drawback to mineral wool: the potential for stone dust. It is advised to use protective gear, gloves, and a respirator when working with cotton wool as direct contact can result in bronchial asthma or allergic dermatitis.

Installation of mineral wool isover with your own hands

The manufacturer offers an extensive range of products for thermal insulation in different designs. The qualities of the material (primarily its density) and the manufacturer’s recommendations should be taken into consideration when selecting a thermal insulation material. Smaller density mats work better for horizontal surfaces; larger density slabs are preferable for wall thermal insulation.

Cold bridges and cracks in the design of the bridges can be prevented by applying two layers of mineral thermal insulation.

Since mineral wool can absorb moisture and lose its thermal insulation properties, it is important to remember to properly waterproof the thermal insulation layer. Waterproofing should be applied to the design prior to laying glass wool; regular polyethylene film can be used for this. Above the mineral wool, there should be a superdiffusion membrane that is protected.

How it is made

What then is the "Izover" insulation? Any insulating material’s properties are mostly determined by how precisely the predetermined technologies are observed during the material’s production. The "Izover" insulation is created in this manner:

• Quartz sand, fiberglass, limestone, and other minerals are pre -mixed.
• The resulting mixture melts at a temperature of 1300 grams. before receiving homogeneous fluid plastic mass.
• In a special installation, this liquid glass is supplied from a high height to a bowl rotating at a high speed, in the walls of which there are small holes. Under the influence of centrifugal force, the hot mass is squeezed out in the form of long thin threads.
• The fibers are mixed with yellow polymer glue.
• The resulting sticky mass is fed into a special furnace, where it is rolled between steel shafts and blown with hot air. As a result, the glue is grasped, and the layer itself is aligned.
• The finished glass wool is entered for circulation saws for cutting the required size on the plates.

Spheres of use of insulation

The material can be used in a wide range of applications due to its universal qualities, affordability, and different forms of release. For instance, the following are the primary applications for Izovera:

1. For baths and saunas, foil isover is used.
2. Ceilings, inter -story floors isolated with less dense material.
3. For floor and roof, the isuver of increased density is used.
4. It is used when installing plastic windows.
5. For insulation of balconies.
6. For insulation of basement and basement.
7. Interior partitions are insulated taking into account the fact that the material has good sound insulation.
8. For insulation of facades.

Reliable and long-lasting material (the manufacturer promises 50 years of warranty operation) can be a great way to insulate not just residential buildings but also apartments and private homes. Well-made decision and cozy homes!

Specifications

Izover: This substance insulates against heat and sound and is used to warm structural components both inside and outside of buildings. Since the primary requirement for using this insulation is a tight fit to the surface, leveling the surface is necessary.

Principal attributes:

• low thermal conductivity;
• high level of sound insulation;
• resistance to the settlement of fungus, small insects, rodents due to special impregnations;
• The convenience of transportation, installation provides a small weight of the material, its density is 13 kg/cube.m;
• elasticity of the material;
• stability in the effects of chemicals;
• Long life.

Thermal conductivity

Thermal conductivity is the primary property of materials used for thermal insulation. It ranges from 0.035 to 0.044 W/MK for different types of isover, which is significantly less than other analogs.

Its feature won’t change over time, provided installation technology is followed. This guarantees that heat loss through the building’s supporting and enclosing structures is prevented.

Soundproofing

Effective sound protection is produced by the heater isovever’s structure, which consists of tiny glass fibers, an air gap, and low dynamic rigidity. In buildings where soundproofing material is insufficient, it is used to guarantee sound insulation.

Combustibility

As per the most recent version of GOST 30244-94, "Construction materials." The term "methods of testing for combustibility" refers to the group of materials that are not combustible. As a result, it’s utilized in low-rise construction as well as interior insulation and soundproofing for a variety of applications.

In residential and public buildings made of log, frame, or thyroid wood, izover is also utilized as an efficient insulator.

Vapor permeability

The primary drawback of this material is its vapor permeability, which is between 0.50 and 0.55 mg/MCPA. When moisture builds up in the absence of a vapor barrier, the insulation’s quality will deteriorate.

When humidity rises by 1%, the level of thermal insulation decreases to 10%. However, the material dries quickly when exposed to adequate ventilation or temperature.

A vapor barrier is used to stop moisture absorption, and a 2–4 cm ventilation gap is left between the overlap and the wall.

Life time

Soundproofing and heat resistance Subject to installation technology, the material’s properties do not deteriorate over time. The building’s structures maintain the thermal insulation parameters of the isover for fifty years without any degradation.

Environmental friendliness and harmlessness

Izover It is constructed entirely of natural materials and contains no dangerous ingredients like formaldehydes or artificial resins. This material is hypoallergenic and safe for use in human life. The investigations showed that there was no hazardous discharge during the procedure.

The weight of the insulation

How much does the insulation weigh? the weight of Izovera, much less comparable insulation. 2.5 is the percentage of isover. As a result, it is used to heat structures composed of thin-walled brick, slag concrete, and wood.

The form of release

Izover was made available in the package as rolls and plates. The material’s elasticity makes it possible to compress it inside the container, which is ideal for storage and transportation. Izover promptly takes on the original size after opening the packaging. The rolls measure 1.2 meters in width and 7 to 14 meters in length.

Other characteristics

Before installation, two-layer rolls can be separated into layers. The temperature at which Izover should not be used is 250 degrees Celsius.

In the humid atmosphere of the island:

• has water -repellent properties;
• Slowly absorbs moisture and water.

Genuine ISOVER insulations meet all security requirements specified in the Customs Union’s requirements and come with a certificate of conformance.

The characteristics of the isover

It won’t be unnecessary to educate yourself on all the features, benefits, and installation principles of isuver before making a purchase. This material is available on the market in a fairly broad range of species; its specifications are listed below:

• Thermal conductivity-0.031-0.041 W/MK. Such a low indicator leads to excellent indicators of insulation and conservation of heat with their stable preservation for a long period.
• Density-10-20 kg/m3.
• Combustibility. Izover belongs to the NG class (completely non -combustible materials). The foil and semi -rigid insulation of this species belongs to the category of SG (weakly combustible).
• Vapor permeability-0.5-0.55 mg/mchpa. Fiberglass absorb moisture, but it is completely given it as it dries. Therefore, subject to the rules of installation and the design of the ventilation gap between the layers, problems with a decrease in thermal insulation properties are not observed.
• Air permeability-120×10-6m3/m*s*PA.
• Sound insulation corresponds to high indicators due to the presence of an air gap between the fiberglass.
• The period of operation. Under the warranty, the service life is at least 50 years.
• Weight. Izover has a lightweight, so suitable for installation on structures with a weak load load.
• The form of release. This insulation comes to the current market in several versions – rolls, mats, slabs.
• Thickness -5-10 cm with an amount of 1 or 2 layers.
• The width of the roll canvas is 1.2m at 7-14 meters long.
• The area of ​​the rolls is 16-20 meters, the slab material is produced in the amount of 1*1 meter.Important! The price of isover depends on the type of material, output form and supplier.

A cozy and energy-efficient home environment is largely dependent on insulation. Comprehending the technical attributes of insulation materials, like Isover, is imperative for making well-informed choices for your residence. Isover provides a selection of products that are made to satisfy different types of insulation requirements, including fire, acoustic, and thermal protection.

The superior thermal performance of Isover insulation is one of its most notable qualities. Isover helps cut energy use and heating and cooling expenses by efficiently trapping heat inside your house during the winter and keeping it outside during the summer. This helps your pocketbook as well as the environment by lowering your dependency on fossil fuels.

Isover insulation is renowned for its longevity and durability as well. Its sturdy design guarantees that it will continue to function well for many years, offering reliable thermal insulation and enhancing the general comfort of your house. Long-term time and hassle savings are achieved due to the durability, which also results in reduced maintenance requirements.

Isover insulation has exceptional acoustic qualities in addition to thermal performance and durability, which helps to lessen noise transfer from outside sources and between rooms. This is especially helpful for people who want quiet spaces in their homes or for homes that are close to noisy areas.

All things considered, Isover insulation’s technical qualities make it a dependable and efficient option for improving your home’s comfort, energy efficiency, and soundproofing. Homeowners can create a healthier, more sustainable living environment for themselves and future generations by investing in high-quality insulation materials like Isover.

Video on the topic

Insulation for the roof isover warm roof Strong

Warming of the roof of the house using ISOVER Warm roof

Warming for walls isover warm walls Strong

ISOVER Saint Gobain Isover Steas

ISOVER SUBSTRODY OF SUBLECTION SUPPLICATION.MP4

Warm Warm Warm C1 Of 3. Volume, smell, dust, water

ISOVER insulation. Advantages and disadvantages. Checking for combustibility

Frame house. Warming of wool. ISOVER. Izover. Honest review.