Installing and connecting a heated towel rail in the bathroom with your own hands

It’s not only about style when it comes to turning your bathroom into a warm and inviting haven; functionality is also a key factor. Installing a heated towel rail in your bathroom is an easy yet effective way to improve its atmosphere and functionality. In addition to giving your room a luxurious touch, it keeps your towels dry and warm for practical reasons. The best part is that you can connect and install a heated towel rail in your bathroom yourself if you have a little do-it-yourself skills.

Selecting the ideal heated towel rail for your bathroom is crucial before beginning installation. To make sure it fits in with your decor and warms your towels just right, take into account elements like size, style, and heating power. Make sure the towel rail can be installed yourself as well, as some models might need a professional’s help.

It’s time to gather the materials and tools needed for the installation after you’ve chosen the ideal heated towel rail. A drill, screws, a screwdriver, a spirit level, a pipe cutter or wrench, and of course the heated towel rail itself are usually required. Before starting the installation process, make sure you have a clear idea of how your bathroom is laid out and where you want the towel rail to go.

In order to prevent mishaps, it is essential to cut off the bathroom’s power supply before drilling any holes or making any connections. When doing do-it-yourself projects, safety should always come first, especially when there are electrical components involved. After turning off the electricity, you can start marking the drilling locations and making sure everything is properly level and aligned.

Now that the locations have been marked, the heated towel rail bracket mounting holes need to be drilled. Before fastening the brackets in place, make sure they are absolutely horizontal with a spirit level. Depending on the style of towel rail you’ve selected, you can then mount the brackets to the wall, fasten the heated towel rail to it, and connect it to the electrical supply or central heating system.

Steps Tools Needed
1. Choose the location for the towel rail, considering proximity to power source and space for towels. Drill, screws, screwdriver, spirit level, measuring tape, pencil
2. Turn off electricity in the bathroom to ensure safety. Turn off the circuit breaker for the bathroom.
3. Measure and mark the positions for drilling holes. Measuring tape, pencil
4. Drill holes into the wall for mounting brackets. Drill, appropriate drill bit
5. Attach mounting brackets securely to the wall. Screws, screwdriver
6. Connect the towel rail to the power supply according to the manufacturer"s instructions. Electrical wiring, screwdriver, wire strippers (if needed)
7. Mount the towel rail onto the brackets. Screws, screwdriver
8. Turn on the electricity and test the towel rail to ensure it"s working properly. Switch, towels for testing

Types of dried towers

Thus, there are three types of wall heaters for bathrooms:

  1. Electric, operating from the network 220 volts. There are 2 types – with a heating cable inside or liquid coolant and heating. Both options are connected the same.
  2. Water towels join the hot water supply or heating system.
  3. In combined double -circuit devices, heat transfer is organized from 2 sources – electricity and dowry network.

Note: The combined dryer’s device is very basic. The electric and water circuits that make up the heater’s two independent circuits can operate simultaneously or alternately. Consequently, universal heated towel rails cost 1.5–2 times as much.

The following is the basic idea behind how electrical appliances work: Once the cable or Ten reaches a predetermined temperature, the thermostat cuts the power. Heating is automatically restarted after the tubular case has cooled by three to five degrees Celsius. Air is introduced into the heating dryers containing non-freezing liquid via the Maevsky crane.

Water dryers make it simpler because they warm up to the internal coolant temperature. The case is composed, less frequently, of copper and painted steel in black or stainless steel. Form: elongated, spiral, ladder, or m-shaped. The shape and material are not very important because we are only thinking about the installation of a heated towel rail; the connection method—lateral or lower—is what matters most.

Installation recommendations

After installing tiles or lining with plastic panels or another material, the heater should be mounted. If a new heated towel rail is to be installed in place of the old coil, it must first be disassembled, repaired as needed, and then installed and connected.

Remark: The water heater’s hidden pipes eyeliner is completed before the finish line (see the above photo). The technology is conventional: a grinder is used to create a furrow in the wall, and the width of the furrow is equal to the pipeline’s diameter plus foamed polyethylene insulation. Next, we apply the hydrogen and lay the eyeliners, or we just cut the threads.

Here are some pointers for mounting a heated towel rail on the wall in the bathroom:

  1. Try to place a water dryer closer to the riser if you plan to connect to the DIS system. When connecting to heating, the placement of the heater does not play the role.
  2. To install the electrical device, there is a requirement of norms – the minimum distance between the outlet (wiring) and the edge of the bath (shell, shower) should be 60 cm.
  3. How height to hang a heated towel rail. There are no clear requirements here, the optimal indentation from the floor lies in the range of 900 … 1200 mm. Choose a height of reasons of ease of use. Exception – electric heaters that are at least 60 cm from the flooring.
  4. Always study the instructions for the installation and operation of the product. The manufacturer will certainly give the drawing with dimensions and indicate all technological indentations, if any required.
  5. It is allowed to install a dryer above the washing machine. If the latter is loaded on top, then the electric heater should not interfere with the free opening of the lid.
  6. To hang a coil on the wall, use regular decorative brackets and dowels. Exception – installation on drywall or a partition of porous materials, you will need special mounts that withstand the weight of the heated towel rail.
  7. When marking holes, try not to get into the seams between the tiles, it is better to retreat from the edge 0.5-1 cm. Otherwise, in the process of drilling, the lining may crack.
  8. You can not have an electric device for drying directly above the bathroom.

Finally, with the experienced plumbing finished, you can install the dryer before the facing work is finished. There is space for the tile—roughly 10 to 12 mm—between the wall and the reflector, meaning that the case is facing forward. However, as the master in the video demonstrates, it is preferable to take out the pipes, plug them, and then hang a heated towel rail after installing by hand:

Connect an electric heater

The easiest fix for apartments or single-family homes without a hot water supply line recirculation system is to install an electric dryer. Any chosen electricity limit can be applied to a towel with a 500 watt capacity. The benefit of installing independently is that you can insert the pipe and crash it into risers.

The following extra parts are required in order to connect the heater with a fork:

  • Copper Copper 2.5 mm² or other section specified in the product passport;
  • a socket with a built -in RCD (a leakage current of 30 mA), designed for current 10 … 25 amperes, depending on the power of the heater;
  • Standard socket.

Citation. PUE regulations unquestionably demand that bathroom outlets be connected via a protective shutdown device, or RCD. A conventional outlet is installed if the line has already been summarized and scared by a differential machine using a 30 mA leak current. The OMA Law states that to calculate its ampezh, divide the drown power in watts by 220 volts.

How to properly connect a heated towel rail in the bathroom that runs on electricity:

  1. We draw on the wall the track from the distribution box to the installation point of the outlet. An important point: it is forbidden to place an electric box in the bathroom, only in the adjacent room.
  2. Cut the stake and socket socket with a grinder. We lay the cable, mount the socket.
  3. We connect the wires to the mains in the camshaft. We remind you: 3 veins of a yellow cable – this is a ground, it is necessarily connected.
  4. Lower the furrow, install the outlet. We hang a heated towel rail after laying tiles.

If the walls of the bathroom are tiled already, run the wiring from the adjacent room in a different direction. Drill a hole in the partition at the outlet installation location, and insert the cable that was installed in the wall of the adjoining room.

Certain heater models come directly attached to the cable and lack a fork. A socket does not have to be installed, but a 30 mA RCD is required. The manufacturer "Dvin"’svideodemonstrates the installation of the heating element and the step-by-step assembly of a heated towel rail with all the fittings:

The Atlantic Na 500W is the most cost-effective electric towel among those with a 500 W capacity (the highest power achievable within any electricity consumption limitations), when considering both the acquisition and operating costs.

Generates this French concern model Atlantic. The Italian unit was responsible for creating the design. The top-tier Toweller Atlantic Na 500W costs, on average, 15,700 rubles. Comparable Russian counterparts with the same capacities cost two to three times as much, while European counterparts start at 50,000 rubles.

The Atlantic Na 500W 40 cm wide can be installed in a small bathroom and heats a room up to 5 kV. m in no time. Significant energy savings are provided by the five operating modes of the Superflow electronic thermostat, ensuring that monthly expenses do not surpass 200 rubles.

Connecting a water heated towel rail

Three connection schemes are utilized when installing a dryer coil:

  1. In apartment buildings – to the riser of the DIS system. There is a sensitive moment: to crash into a common pipe, you need to block the water for yourself and all your neighbors on the riser. It may be necessary to agree in the local water utility.
  2. In the country cottage – to the line of recirculation of hot water coming from the indirect heating boiler.
  3. If the accumulative tank of the hot water or the recirculation highway is absent, the heated towel rail is connected to the heating system. Minus: in the summer the coil does not bask.

How to make sure the dryer that is connected to water heating is heated during the summer. The issue can be resolved in one of two ways: either purchase a hybrid heater or leave a gas/electric boiler on. In the second scenario, the heat generator will "hire" if you don’t leave one or two batteries in the machine. Therefore, switching to electricity or dry cleaning on the street is simpler.

Two eyeliners are used to connect the water dryer to the DHW riser; a bypass is positioned in between them without any locking reinforcement. There is a 300 mm minimum spacer between each insert. It is acceptable to move the bypass line to the side by 10 to 15 centimeters, but not to reduce its diameter. The internal minimum diameter of the carts is DN20, and ideally, the riser size should match.

The jumper does not need to be installed if a heated towel rail is connected to a private home’s recirculation pipe. As indicated by the diagram, let all of the water that is pumped back into the boiler by the circulation pump pass through the coil.

How to use your hands to connect a heated towel rail and apply the proper eyeliner:

  1. Put the eyeliners in the grooves of the walls with a slope of 2 … 3 mm per 1 meter linear. The upper supply line leans towards the dryer, the lower – to the riser. As a result, the first point of the insert will be higher than the coil, the second – below.
  2. Horizontal type heaters with a side connection are connected simply-a fitting with a thread is removed from the wall, an American or a coupling muffle is screwed to it (it is supplied with the product). Controversial ball cranes are placed on the eyeliners near the riser.
  3. A vertical heated towel rail of the “Leshenka” type can be attached according to the diagon with a diagonal or lower connection. If possible, realize the first option to minimize the risk of importing.
  4. Avoid the rotation of the pipes of the hidden laying of 90 °, do not stir the connecting fittings in the furrows – corners, transitions, and so on. It is difficult to eliminate the flow inside the partition – you need to tear off the tile, break the plaster.
  5. Use metal -plastic or stitched polyethylene as hidden inholes. An open connection can be made from polypropylene pipes, the connection – through threaded adapters.

A crucial aspect. It is important to consider the internal pipe diameters rather than the external ones when choosing polypropylene to connect a heated towel rail. PPR walls are fairly substantial.

A clever plumbing trick used by some involves cutting eyeliners into the riser above the floor, allowing the pipes to run freely along the wall and then rise inconspicuously to the dryer. This strategy is incorrect; it is preferable to install pipelines along the shortest path in the strata. The owner will frequently need to twist the Maevsky crane due to the heater’s tendency to collect air. This is the second negative moment.

By using an analogy with the radiator connection, one can connect the coil of a heated towel rail to a heating system. Place a ball crane at the entrance and a balancing valve at the exit.

The valve needs to be lowered because the tubular dryer has very little hydraulic resistance. If not, the batteries will continue to be extremely hot since the entire coolant will pass through the heater. The carts’ internal diameter is DN15.

Finally about combined dryers

When connected to a home heating system, the double-circuit heated towel rail effectively addresses the issue of seasonality. He heats the water circuit during the winter and allows you to activate the second electric coil at the conclusion of the heating season. Installing the device is fairly standard; it is mounted on brackets and connected to the heating and electricity networks right away.

It is not required to install the new Soviet coil in the same location and connect it to the existing fixtures if the old one in the apartment needs to be changed. The riser should definitely be replaced because it is most likely "overgrown" with rust. After determining the best location for the heater, installing the heated towel rail while accounting for any additional needs involves drawing up the connection diagram.

A useful and satisfying do-it-yourself project for your bathroom is installing and connecting a heated towel rail. In addition to giving your room a hint of luxury, it also offers warmth and coziness, particularly in the winter. You can have a heated towel rail that works and improves the appearance and utility of your bathroom by following a few easy steps.

First and foremost, it’s critical to select the ideal heated towel rail for your bathroom. In order to make sure it fits your needs and blends in with your current décor, take into account aspects like size, style, and heat output. Whether you choose a freestanding or conventional wall-mounted rail, be sure it will fit nicely in the available space and be easily accessible.

Next, become acquainted with the installation procedure. The majority of heated towel rails include detailed instructions that walk you through each step. Before you begin, make sure you have the required equipment and supplies on hand. If you have any questions about any aspect of the installation, don’t be afraid to ask experts for advice.

Safety should come first when it comes to connecting your heated towel rail. It’s best to hire a qualified electrician to handle the wiring if you’re not confident in your electrical abilities. For those who feel comfortable doing their own electrical work, though, don’t forget to turn off the power source before starting and to double-check all connections to prevent any possible risks.

Remember to give your heated towel rail a thorough test after installation to make sure everything is operating as it should. Before using it frequently, make any necessary adjustments and check for leaks or electrical problems. Your heated towel rail is a valuable addition to your bathroom and will give you years of warmth and comfort with the right upkeep.

Yes, of course! This is the article’s clear and simple main thesis: "We’ll walk you through the steps to make this DIY project more cozy and warm in your bathroom with our guide on installing and connecting a heated towel rail. We’ll go over everything, from choosing the ideal towel rail to comprehending the required equipment and safety measures. Our simple instructions will enable you to update your bathroom with a warm and useful addition, improving your daily routine and possibly saving energy expenses, whether you’re an experienced do-it-yourselfer or a novice."

Video on the topic

How to install connect a heated towel rail in the bathroom with your own hands

Connection of a heated towel rail. Basic principles.

The best way to connect a heated towel rail!

What type of heating you would like to have in your home?
Share to friends
Michael Kuznetsov

I love to create beauty and comfort with my own hands. In my articles I share tips on warming the house and repairing with my own hands.

Rate author
vDomTeplo.com
Add a comment