Installing a gas column in an apartment with your own hands – norms, rules and step -by -step instructions

Are you considering adding a gas column to your apartment? In particular, if your building lacks a central hot water system, it might be an affordable way to supply hot water. It’s important to comprehend the conventions, guidelines, and procedures involved in the process before you begin, though. Certain rules must be followed when installing a gas column to guarantee both safety and legality.

Your primary concern should be safety above all else. Maintaining safety procedures and paying close attention to detail are essential when using gas appliances. Inadequate installations and gas leaks can seriously endanger your property and health. Therefore, before starting the installation process, it’s imperative that you familiarize yourself with local regulations and obtain any necessary permits.

Determine whether a gas column is appropriate for your apartment before beginning the installation. Take into account elements like available space, gas supply, and ventilation. In order to avoid the accumulation of carbon monoxide, an odorless, colorless gas that can be fatal in high concentrations, adequate ventilation is essential. Make sure your apartment has enough room for the gas column and a dependable gas supply as well.

After verifying that your apartment is appropriate for a gas column, it’s time to collect the required equipment and supplies. Along with specialized materials like gas pipes, fittings, and seals, you’ll need basic tools like wrenches, screwdrivers, and pipe cutters. Using premium materials is crucial to maintaining the longevity and integrity of your installation.

With everything you need at your disposal, it’s time to start the installation process. To begin with, carefully assemble the gas column according to the manufacturer’s instructions. Be very mindful of details like the right pipe connections, sealing methods, and venting specifications. Your gas column’s efficiency and safety may be jeopardized by improper assembly.

It’s time to connect the gas column to the gas supply after it has been assembled. To ensure correct functioning and prevent gas leaks, this step needs to be done carefully and precisely. Verify that all fittings and connections are tight and secure by checking them twice. Make sure the gas column is functioning properly and there are no leaks by giving it a thorough test after it has been firmly connected.

Lastly, don’t overlook upkeep and routine examinations. Maintaining your gas column in a safe and effective manner requires regular maintenance. To look for any indications of wear, damage, or leaks, schedule recurring inspections by certified experts. Furthermore, become acquainted with the manufacturer’s recommended maintenance procedures and adhere to them scrupulously.

Step Description
Gather Tools Collect necessary tools: pipe wrench, adjustable wrench, gas leak detector, pipe cutter, Teflon tape.
Shut Off Gas Locate and turn off the main gas valve to your apartment.
Plan Location Choose a suitable location for the gas column near existing gas and water pipes.
Measure Measure and mark the positions for mounting brackets and pipes.
Install Brackets Securely attach mounting brackets to the wall using screws and a drill.
Connect Pipes Connect the gas and water pipes to the column, ensuring tight connections with Teflon tape.
Test for Leaks Use a gas leak detector to check all connections for leaks.
Secure Column Fasten the gas column securely to the mounting brackets.
Turn On Gas Gradually open the main gas valve and check for any signs of gas leaks.
Ignite Pilot Light Follow the manufacturer"s instructions to ignite the pilot light.
Test Functionality Test the gas column by running hot water to ensure it"s functioning properly.

What are the norms and rules?

Our area of expertise is that any work pertaining to gas supply organization, such as installing tees, installing locking valves, or supplying gas pipelines, should only be done by highly skilled professionals. At the very least, you will "earn" a solid fine and spoiled nerves if you decide to handle this work yourself. However, this does not imply that installing a gas column yourself is unfeasible.

If there is a lack of confidence, it is preferable to invite experts.

From a technical perspective, there are two kinds of work that can be done when installing a gas column:

  1. Installation "from scratch".
  2. Replacing old water heating equipment with new.

If this is the first time the column is mounted, you must first create the proper project, which includes regulating the work on the gas pipe supply to the location of the column’s fixing. This is also an effect of a gas economy or a specific business authorized to carry out such operations. Furthermore, once a project of that nature is approved "on hand" and you are granted authorization to install a gas column, the next steps can be carried out on your own. This is just the initial phase where you can make a sizable savings.

No extra work is required if the old gas water heater is just going to be swapped out for a new one. The most important thing is to follow the current project’s instructions and install a gas column.

Crucial! The official "Gas distribution systems" act, SNiP 42-01-2002, governs the installation of gas water heating columns. Furthermore, since non-metallic pipes and fittings are now used in the great majority of gas supply installations in private homes, the points of SP 42-101-2003—which outlines the process for using metal and foamy gas pipelines—must be followed.

In layman’s terms, if we discuss proper gas column installation, we would like to draw attention to the following, based on the regulatory documents mentioned above:

  • The room should be at least 7.5 square meters.m;
  • sufficient ventilation should be provided;
  • The distance half a trench (ceiling height) cannot be less than 2 m;
  • There must be a chimney in the room – a diameter of 120 mm (in this case, no dushniki that are in any apartment);
  • In the water system, the pressure should not be less than 0.1 atm;
  • The installation of the column should be performed on a wall created from non -combustible materials;
  • The column is strictly forbidden to place over the gas stove – the minimum distance of 10 cm.

Gas columns can be installed in bathrooms as long as they meet the necessary requirements. These days, a city apartment’s kitchen is the only space where this water heating apparatus is located. However, the law does not require the column to be moved at the customer’s expense if it was positioned in the bathroom as per the previous project.

What tools and materials will be needed?

What is needed for installation is as follows:

  • Rozhki key 27/30.
  • Divorce key – 2 pcs.
  • Rozhki key 32/36.
  • Hermatic type "Unipak".
  • Packla or Fum.

In theory, everything mentioned above is always close at hand. However, specifically for the column installation, you will need to buy:

  1. Galvanized pipe with a thickness of 1 mm. It can go with the column. If not, then in the manual for its operation developed by the manufacturer, its diameter is indicated.
  2. Ring-rosette-will be required when arranging the entrance to the chimney.
  3. Gas hose – typical. The sizes will be indicated in the design documentation.
  4. Dowel, through which the column on the wall will be mounted.
  5. The filter of coarse water purification – the life of the new gas column directly depends on its quality.

A feasible way to guarantee hot water supply in your apartment is to install a gas column, particularly in places where centralized heating systems might not be dependable or available. To guarantee safety and adherence to laws, it is imperative to observe conventions, guidelines, and detailed instructions.

First and foremost, it’s crucial to become familiar with local laws and safety requirements before beginning to install a gas column. It can be dangerous to install gas appliances incorrectly, so getting advice from experts or authorities about what’s safe and allowed in your area can be very beneficial.

Meticulous attention to detail is essential when it comes to the installation process itself. Verify that the gas column’s selected location satisfies safety specifications, including adequate ventilation and close proximity to combustible materials. Reducing risks can be achieved by following manufacturer instructions and any special instructions from your local gas utility company.

Assemble all required tools and supplies, such as pipes, fittings, and any extra safety gear, before beginning the installation. Verify again that everything is in working order and appropriate for the model of gas column you have. The integrity of the installation may be compromised by skimping on materials or using inferior parts.

Enjoy the process and work methodically through the installation. Installing a gas column is a simple task, but it needs to be done carefully and precisely. Make sure all connections are tight and leak-proof by checking them twice. Before turning on the gas, make sure everything is secure by doing a leak test with soapy water.

For the gas column to continue operating safely after installation, routine maintenance must be carried out. As advised by the manufacturer or local laws, this also entails cleaning filters, looking for wear or damage, and arranging for professional inspections. You can increase the longevity of your gas column and lower the possibility of malfunctions or accidents by performing routine maintenance.

In summary, adding a gas column to your apartment can be comfortable and convenient, but it’s a responsibility that shouldn’t be ignored. You can enjoy the convenience of hot water on demand while maintaining the safety of your home and its occupants by following conventions, regulations, and detailed instructions.

One crucial element that is frequently disregarded when it comes to heating and insulating your house is installing your gas column in your apartment correctly. Although it may seem overwhelming to do it yourself, it is completely doable with the correct assistance. This post seeks to give precise guidelines, standards, and a methodical walkthrough for the installation procedure. Every stage is broken down into doable tasks, from comprehending safety regulations to choosing the ideal location and guaranteeing adequate ventilation. You can make sure that your home is safe and cozy as well as that you and your loved ones are safe by adhering to these rules.

Video on the topic

Installation of the Baxi gas column (Baxi) SIG2-14I. Customer from YouTube .

How to install a gas flow water heater with your own hands.

How to install a gas column myself and change plastic pipes. Do -it -yourself repair in Khrushchevka.

Replacing a gas column!!! With your own hands!!!

What type of heating you would like to have in your home?
Share to friends
Sergey Ivanov

I like to help people create comfort and comfort in their homes. I share my experience and knowledge in articles so that you can make the right choice of a heating and insulation system for your home.

Rate author
Add a comment