Installing a boiler in the bathroom of a private house

When it comes to home heating options, placing a boiler in a private home’s bathroom can be a sensible and effective decision. Installing a boiler in the bathroom is a convenient and space-saving solution for providing warmth and hot water, particularly in the winter months.

Even on the coldest days, you can take a warm and comfortable bath or shower thanks to a boiler in the bathroom. It guarantees immediate access to hot water anytime you need it by doing away with the need to wait for hot water to travel from a distance. You will feel more comfortable and save time and energy by doing this.

Moreover, putting in a boiler in the bathroom can maximize the amount of space that is available in your house. Placing the boiler in the bathroom, which is often a small space where every inch counts, frees up important space in other parts of the house. This can be especially helpful in smaller homes or ones with little room for storage.

Furthermore, the overall aesthetics of the bathroom can be enhanced by the presence of a boiler. Contemporary boilers are made to be small and elegant, fitting in with bathroom decor without being overly large or noticeable. This enables you to take advantage of the advantages of effective heating while keeping a neat and fashionable appearance.

All things considered, putting a boiler in a private home’s bathroom has many useful benefits, such as increased convenience, optimized space, and improved aesthetics. Whether you’re building a new home or remodeling an old one, a bathroom boiler can be a wise investment for efficiently satisfying your heating requirements.

In the article "Installing a Boiler in the Bathroom of a Private House" on our Heating and Insulation website, we delve into the practicalities and considerations of this often overlooked but crucial aspect of home comfort. Installing a boiler in the bathroom presents unique challenges and advantages, requiring careful planning and adherence to safety regulations. Our article discusses the benefits of having a boiler in the bathroom, such as space-saving and convenience, while also highlighting the importance of proper ventilation and waterproofing to mitigate potential hazards. We provide step-by-step guidance on how to safely install a boiler in the bathroom, emphasizing the need for professional expertise and compliance with building codes. By addressing common concerns and offering practical advice, we aim to empower homeowners to make informed decisions about their heating systems, ultimately enhancing the comfort and efficiency of their homes.

Why a boiler in a bathroom

When it comes to gas equipment, the state has very tight regulations. Nearly every installation procedure and centimeter of room dimensions are outlined in SNIP, and the builder is required to follow them.

This is a prerequisite for the owner to acquire an operating permit from the gas supply company and to formally authorize the equipment’s operation.

Of course, it would be better to install the boiler in a dedicated boiler room or furnace room, but due to space constraints, private home owners are not always able to do this. Boilers are typically installed in kitchens.

These days, not everyone should choose this option either because modular kitchen sets make it difficult to conceal the boiler in the kitchen and because their combined use ugliness the modern interior design.

Since the kitchen and living areas are connected, it is strictly forbidden to place gas appliances or water heaters on the studio variant’s property. The installation of the boiler in the bathroom is the obvious conclusion in this instance.

Actually, it’s convenient because contemporary gas boilers are designed to operate on two circuits, which allows them to heat the building as well as the water needed for domestic hot water (DHW).

By reducing heat losses over the course of pipelines, the placement of such units in the consumption zone results in savings on fuel as well as building materials for piping equipment.

The laws governing this topic as of right now are ambiguous, but it is believed that the economy of energy resources and the desire of Russians to implement such a scheme will serve as a foundation for lawmakers to create precise guidelines for the placement of boilers in bathrooms while accounting for all current constraints.

Rules and regulations

Even for a specialist, it is challenging to locate a precise response to this query in the current normative documentation. The Soviet SNIP regulations specifically forbade the installation of boilers in restrooms. The prohibition is not stated clearly in the new SNIP 42-01-2002.

According to global custom, citizens are free to carry out any action that isn’t specifically prohibited. however, not in our nation. When contacted on this matter, the majority of gas companies decline to speak with the applicant.

Reasons for prohibition of installation in bathrooms and toilets

The primary issue, for which gas supply companies forbid the installation of gas receiving equipment, is the air’s high level of humidity in these kinds of establishments. The majority of the metal parts of boiler equipment actively corrode in these kinds of environments, which is the primary cause of the equipment’s quick deterioration.

The automatic regulation devices and safety contacts combine to create an emergency scenario when there is high humidity.

For instance, if the thermocouple’s contacts are oxidized, they may mistakenly set the boiler’s water temperature. In that case, the boiler may continue to operate and the heating medium may change from liquid to steam, which could cause the boiler to explode.

Furthermore, one should consider that modern gas boilers are energy-dependent and need to be connected to the electrical grid. Such equipment will need more protection against electric shock when used in a humid environment.

If the room does not meet SNIP 42-01-2002, the applicant will also not be allowed to install a boiler.

  • by the minimum established size of the area and the presence of additional devices, such as a boiler;
  • on the presence of natural supply and exhaust ventilation with three times air circulation per hour, determined by the volume of the room;
  • by the established size of glazing, not less than 0.3 m2 per 1 m3 of room volume;
  • by the presence of a chimney system.

Standard bathrooms typically differ significantly from the required volume of the room, so the owner should consider this before making an application.

Is it possible to circumvent the ban

It is important for all homeowners to understand that the safety requirements for installing gas equipment are not arbitrary decisions made by bureaucrats.

The primary goal of the standards, which have been developed over time, is to ensure that the stock of housing is safe for habitation. In terms of technology, they make a lot of sense.

It is much simpler to install a boiler in the bathroom if one has already been installed there; otherwise, a new unit must be replaced with a similar one.

No special approval is needed in this instance. In many places, gas supply organization inspectors give favorable recommendations for installing closed-type units with coaxial smoke flues and placing boilers in bathrooms provided the room’s measurements meet SNIP requirements.

Some owners find a solution to the problem of whether installing a gas boiler in the toilet is feasible, completing the steps necessary for the house’s redevelopment by modifying the technical documentation and reclassifying the bathroom as any other non-residential space after registering the modifications with the BTI. Next, complete the project documentation for the boiler installation in the house’s permitted area.

Next to the boiler, install plasterboard partitions and plumbing fixtures after commissioning the gas equipment and receiving an official permit to operate the boiler from the state gas corporation.

In the end, such improvised remodeling cannot be deemed lawful. Furthermore, the landlord will only be able to realize the value of the item if he attempts to sell it after tearing down the constructed walls.

What is stipulated for unauthorized installation

In addition to facing severe administrative penalties, a home owner who installs an illegal gas boiler unit runs the risk of losing their gas supply altogether, which includes the ability to heat water for cooking. Any changes made to the gas equipment by unauthorized individuals will be promptly documented.

The gas inspectorate shall inspect gas installations at least once a year in accordance with the terms of the concluded contracts and the regulations governing the use of gas.

The illegal redevelopment will be discovered during the subsequent inspection, and the owner will be held accountable either criminally or administratively.

The following categories of penalties are mandated by law:

  1. Monetary sanctions from the gas supplier in accordance with the RF Governmental Decree No. 549 of 2008.
  2. Administrative fine under Art. 7.19 CAO RF.
  3. Criminal liability under Art. 158/109 CRIMINAL CODE OF THE RUSSIAN FEDERATION.

The severity of the penalties:

  1. The company supplier disconnects the subscriber from the gas line, or charges an additional fee of 45 thousand rubles. rubles.
  2. The administrative fine for citizens is set at 2 thou. rubles., to officials – 4 thousand. rub., and legal entities – up to 40 thousand. rub.
  3. Criminal liability for citizens implies imprisonment for up to 2 years, and if such actions caused the death of people – up to 5 years.
Benefits Drawbacks
Convenient for hot water needs in the bathroom. Space constraints may arise, especially in smaller bathrooms.

There are several advantages to installing a boiler in a private home’s bathroom, including increased convenience and effective space utilization. Homeowners can benefit from instant access to hot water for showering, laundry, and other household needs by placing the boiler in the bathroom. Because of their close proximity, there is no longer a need to run pipes throughout the house, which can reduce heat loss and energy costs.

Additionally, putting the boiler in the bathroom can maximize how much space is used inside the house. Since bathrooms are frequently among a home’s smaller rooms, installing a boiler here can free up valuable square footage in other rooms. This can be especially helpful in small or multi-story homes where there is a limited amount of space.

However, before choosing to install a boiler in the bathroom, it’s important to take a few things into account. Prioritizing safety above all else is especially important when using heating appliances in potentially damp environments. To avoid any mishaps or damage, adequate ventilation and waterproofing measures must be in place.

Homeowners should also consider whether it makes sense to put the boiler in the bathroom given their unique requirements and the design of their home. For example, having the boiler in this location could be inconvenient or lead to arguments over hot water availability if the bathroom is frequently used during periods of high hot water demand, like the mornings.

In conclusion, installing a boiler in a private home’s bathroom has benefits for both space utilization and convenience, but it also necessitates careful thought out safety precautions and practicality. To make sure that the choice meets their needs and improves the overall performance of their home heating system, homeowners should carefully consider these factors and seek professional advice.

Video on the topic

How to connect a towel rail in a private house ? Part 1

How to install a compact gas boiler in a private house. Building a boiler into a kitchen set.

Installation of a gas boiler in a private house 120 m

What type of heating you would like to have in your home?
Share to friends
Sergey Ivanov

I like to help people create comfort and comfort in their homes. I share my experience and knowledge in articles so that you can make the right choice of a heating and insulation system for your home.

Rate author
Add a comment