Installation of the toilet on the tile floor – step -by -step instructions (3 ways)

Even seemingly insignificant home improvement projects can have a significant impact. While it may not seem like the most exciting project, installing a toilet on a tile floor is a necessary component of any bathroom upgrade or renovation. Furthermore, doing it correctly can avert problems down the road like leaks or loose fittings. This post will provide you with detailed instructions on three distinct ways to install a toilet on tile, all of which are easy to follow.

Let’s start by discussing why installing a toilet on tile necessitates a little more care and attention than on a conventional floor. Because tiles are hard, uneven surfaces, it can be more difficult to get a toilet to sit level and securely. But for the average do-it-yourself enthusiast, it’s completely doable with the right tools and techniques. These techniques will assist you in finishing the task correctly, whether you’re installing a new toilet or replacing an outdated one.

The first method entails sealing the gap between the tile floor and the toilet with a wax ring. This time-tested method has been in use for many years and is still favored because of its dependability. We’ll walk you through setting up the toilet and the floor, placing the wax ring properly, and fastening the toilet. It’s a simple technique that works well in the majority of bathroom configurations.

The second method, which is more contemporary, substitutes a rubber gasket for the wax ring. This approach provides a less messy and difficult installation process. We’ll go over how to set up and fasten the rubber gasket correctly so that there’s no need for messy wax and a tight seal. For people who would rather install toilets in a cleaner, more efficient manner, this is a fantastic option.

The use of a toilet flange extender is finally covered in method three, and it can be especially helpful when dealing with uneven tile floors. With this technique, you can modify the toilet flange’s height to guarantee a level installation—even on tiles with different thicknesses. We’ll guide you through the steps of putting in the extender and fastening the toilet while offering advice on how to get a polished appearance.

You’ll have the know-how and self-assurance to take on the task of toilet installation on a tile floor with ease after learning about these three techniques. Whether you’re a novice renovator or an experienced do-it-yourselfer, following these detailed instructions will help you finish the project successfully and enjoy a securely installed toilet in your newly renovated bathroom.

Making sure your home is comfortable and efficient should be your top priorities when it comes to insulation and heating. Efficient heating systems guarantee year-round comfort without breaking the bank, and proper insulation keeps your home warm in the winter and cool in the summer. You can optimize your home’s thermal performance and lower energy costs by taking a number of steps, such as upgrading insulation materials and sealing drafts. Prioritizing insulation and heating upgrades can have a big impact on the comfort and energy efficiency of your house, whether it’s through attic insulation, energy-efficient window upgrades, or thermostat installation with programming.

Preparation for installation work

The following actions make up the preparatory phase:

• the choice of a suitable location of plumbing in the toilet, the creation of markings;
• Display drainage drainage and water supply. The ends of the pipes should be approximately 13-16 cm from the surface so that the device can be connected to communications;
• If repairs are carried out in the room, then you first need to put the tile, and then start installing plumbing. Otherwise, you need to cut the necessary form of the pedestal from the tiles of the floor.

The required tools must be prepared after the preparation.

Tools and materials

The following tools will be needed to install the floor tile:

• marker, pencil or chalk to mark the contour of the base on the tile or floor;
• a drill designed for ceramics, and a drill for plastic dowels;
• agent – sealant to ensure waterproofing;
• standard set of screwdrivers;
• drill or punch;
• Kern for stripping the upper layer of tiles;
• wretched and divided key;
• bolts for attaching the toilet to the floor;
• Passatigi;
• grinding machine with a diamond circle;
• connecting hose;
• tap;
• adhesive (for example, liquid nails), if you plan to use method No. 3 to attach plumbing on a tile floor with heated;
• plastic dowels;
• plastic gaskets for bolts;
• Spatula to eliminate the residues of the sealant or adhesive.

Tiles mounting methods

Depending on the plumbing device model, there are multiple installation options with varying labor intensity and technological capabilities. Although none of the procedures listed below are particularly difficult, you must follow the exact instructions to ensure proper conduct.

In order to complete the final method, which entails mounting the toilet with adhesive, it is best to have some experience with repair work. You can pre-train on a small section of the tile if you have no prior experience.

It is best to leave the toilet to the pros if the bathroom’s tiles are particularly pricey. If not, you run the risk of unintentionally damaging the flooring during the process.

Toilet shell fastening types and matching installation techniques:

• Method No. 1 – is used for the vertical arrangement of fasteners, dowels are used in the process;
• Method No. 2 – with the side placement of fasteners, the toilet is mounted to the floor with corner brackets;
• Method No. 3 – the use of adhesive in the presence of a system of warm floors and communications under the flooring.

Method No. 1 – with the vertical location of the fasteners

There is minimal complexity involved in installing a plumbing appliance on floor tiles using this method. It works well with models that have pre-made holes for fastening in the lower portion. Instructions for installation:

1. The optimal place for placing a plumbing device is determined, while the distance from the drain to the entrance to the sewer is certainly taken into account. This length will be required when selecting a corrugated pipe connecting the toilet to the sewer.
2. The contours of the selected installation site should be marked on the tile with a marker or chalk, the location of the factory holes for fastening to the floor should also be applied. It is important that the product is installed strictly perpendicular to the floor, t.To. Otherwise, the risk of a slight displacement of the toilet when fastening increases.
3. At those points that were marked on the tile in the previous step, with the help of a core, a tile coating is knocked down to prevent random sliding of the tool when performing the procedure. The area where the stuffing will occur, it is advisable to moisten a little, this will help to do the work more carefully.
4. After the holes for fasteners were made by the drill, plumbing is installed. If there are no problems and the location is satisfied, the toilet is removed, and a special sealant is applied along the indicated contour. The use of such a tool will avoid the formation of water puddles under the toilet. Fasteners should also be filled with sealants to make fastening more dense and reliable, as well as ensure waterproofing of a concrete screed.
5. Plumbing is installed along the contour. Then the fasteners are carefully delayed so as not to shift the product. A mixture tool that will certainly be squeezed under a mass of toilet, it is immediately required to remove with a spatula.
6. A strip of sealant is decorated by grouting.
7. The tank is mounted (find out how to fasten the tank yourself) and the corrugated pipe, the plumbing is connected to the sewer system and the cold water supply pipeline.

Method No. 2 – with lateral placement, fastening to the floor with underlying brackets

Plumbing installation using this method entails hidden fastener installation. This process is more intricate than the last one because it must be followed precisely like a set of instructions. The closest location of the sewer drain to the toilet is the primary distinction.

Guidelines for attaching the toilet to the ground:

1. Unlike the previous method, in this embodiment, it is first recommended to carry out all the pipe laying work. Best if it is done before laying tiles as a floor covering.
2. Plumbing is installed without fastening, a circuit is applied to the floor and marks are placed showing points of fasteners.
3. The lower component of the toilet. n. "Hidden mount") is mounted on the floor. With the help of corner brackets, plumbing is fixed. The fasteners must be wrapped alternately, not forgetting about constant control over compliance with the contour. This will make hard installation and prevent even the minimum displacement of the plumbing device.
4. The upper component of the product is installed in the already mounted lower, and then reliably fixed through the side of the already ready -made toilet holes. At the stage of connecting sewer communication, adjustment is possible.

The components that attach to the floor are sealed with unique decorative plugs once the product installation is finished and the installation quality is satisfactory (so that these parts are not knocked out of the interior design). The process is moderately complex, requiring the utmost precision and attention to detail.

Method No. 3 – use a sealant

The "warm floor" system in bathrooms is frequently installed using an electric or water source, making it impossible to drill individual fasteners. This may result in a serious functioning disorder, to. There is a greater risk of waterproofing or cable damage.

The only option in a situation like this is to use money based on construction adhesive. Liquid nails, certain silicone mixtures, and resins can all be used to secure the toilet to the floor.

The following is the algorithm used to install the toilet on the tile floor:

1. Put a plumbing device and apply the contour of its foundation to the tile.
2. The surface layer of tiles is neatly cleaned with the help of a diamond circle or other similar tool. The resulting roughness will provide reliable adhesion to the toilet base. A similar procedure is performed with the toilet.
3. At a distance of 3-4 mm from the created circuit, a layer of adhesive is applied so that its main part is preserved directly under the pedestal. All the substance, which was squeezed out after installation, must be immediately removed by a spatula. If this is not done, after hardening, the adhesive can only be removed along with ceramic tiles.

The procedure for joining the toilet of components, connection to sewage and water supply

The process of assembling the toilet’s parts after it has been installed on a tile floor. The steps in the process are as follows:

1. A corrugated pipe is mounted through which the product will be connected to a sewer pipe. This element prevents the spread of stench in the apartment, so it is important to use high -quality corrugation. When installing, the pipe must be maintained with two hands, so third -party assistance will be required.
2. Using bolts and other parts included, the drain tank is fastened.
3. Plumbing is connected to water supply.

The toilet’s design, specifically the type of release, determines how the system is connected to the sewage system:

• Models with direct release are most often found. Despite the fact that they can only be mounted on a vertical riser at a certain angle, the procedure itself is quite simple. Connecting to the sewer system is carried out using a sealing or eccentric cuff;
• The toilets with a vertical nozzle are also quite common. Their main advantage is the ability to install at a minimum distance from the wall and at any angle. Before installing plumbing, you will need to put a flange with a latch, then you need to connect the sewer pipeline and install the toilet on top;
• Model with a side nozzle is mounted similarly to installing a product with a direct release, while it is important to observe a certain angle. The procedure uses an eccentric or sealing clutch.

Corrugation is typically used to connect straight to the sewer output. It lets you alter the slope angle in addition to the distance between the toilet and the sewer opening.

Tightness of the compound is achieved because the membrane is present inside the corrugated pipe; however, silicone sealant is frequently used in addition for waterproofing.

Avoid sagging the corrugation when mounting it, as this will cause liquid to stagnate and frequently lead to clogs.

Moreover, the connection to the water supply differs based on the toilet’s design and type:

• In the presence of an internal water supply system, a flexible hose or a special copper tube is used for connection. As a rule, such elements when selling are included with details for attaching to the floor, however, it is advisable to clarify this moment from the consultant separately. Sometimes it happens that crane threads and thread on a copper tube do not coincide, then an adapter and sealing elements will be required;
• With an external water supply system, the connection is most easily carried out. As a rule, additional details are not required.

All points of connection, regardless of how the plumbing device is connected to the water supply, need to be sealed with plumbing device-specific sealants to guarantee waterproofing and reduce the possibility of leaks.

To ensure the stability and longevity of a toilet installed on a tile floor, the proper technique must be chosen. Every method has pros and cons, whether you choose the flange extender technique, adhesive method, or direct method. You can confidently finish the installation process by adhering to step-by-step instructions specific to your preferred method.

Obtaining all required tools and materials is crucial before starting the installation. The toilet, wax ring, closet bolts, level, screwdriver, adjustable wrench, flange extender (if applicable), and safety equipment are all included in this. Everything will go more smoothly and there will be fewer chances of errors or interruptions if everything is prepared in advance.

Paying close attention to details is essential when installing something. As the toilet’s foundation for stability, make sure the toilet flange is firmly fixed to the floor. To get the best results, carefully follow the manufacturer’s instructions when using adhesive or a flange extender. Before tightening the bolts, make sure the toilet is positioned correctly by using a level.

Checking for leaks and wobbling is crucial once the toilet is installed. Check for any evidence of water seepage around the base of the toilet after flushing it multiple times. To obtain an appropriate seal, adjust the bolts or wax ring as needed. You can ensure the toilet works properly and address any problems quickly by thoroughly testing.

In conclusion, careful planning, close attention to detail, and adherence to the right procedures are necessary when installing a toilet on a tile floor. You can successfully finish the installation process and take pleasure in having a stable and functional toilet in your home by adhering to step-by-step instructions specific to your preferred method. For the best outcomes, always keep safety and accuracy as your top priorities.

Video on the topic

How to install a toilet without screws is easy and fast!

How to fix the toilet. We glue the toilet to the floor. Stroyhak plumbing

How to install a toilet on a tile without bolts and drilling using a sealant with your own hands!!!

Easy, quick and reliable way, installing the toilet on the tile

How to connect a toilet without corrugation.

The best way to connect the toilet | After that, he will never score | Weekdays plumbing

Laying tiles 3 errors permissible most often