Installation of heating mats of a warm floor for tiles of tile

There’s nothing better than waking up to a warm floor when winter’s chill descends. Your home can be made much cozier by adding heating mats beneath your tile to provide cozy warmth and get rid of cold toes. This cutting-edge heating solution offers both luxury and functionality, making it ideal for renovations to your kitchen, bathroom, or any other tiled space.

The way heating mats for tile floors function is by softly emitting heat from under the tiles, filling the space with a comforting warmth. This improves comfort levels while also assisting in maintaining a steady temperature, which may save energy costs by eliminating the need for additional heating sources. A warm, welcoming space will replace any cold spots.

The adaptability of heating mats for tile floors is one of their key benefits. They work with most types of tile flooring, including ceramic, porcelain, and natural stone, and can be installed in a variety of rooms. Because of its adaptability, you can take advantage of the advantages of a warm floor in any room of your house, including the kitchen and bathroom.

It’s a fairly simple process to install heating mats beneath your tile for a warm floor, especially if you’re doing it during renovations or new construction. Many do-it-yourselfers are able to complete the project with the correct equipment and a little bit of experience. Of course, professional installation services are also offered for individuals who are less inclined to do it themselves to guarantee a job done safely and effectively.

Types and device of heating mats

Thermomes are a rolled system of flexible heating elements. On this the fiberglass grid is built. It is a cell made of raw fiberglass glass and fiberglass threads woven together. In addition to being resilient to rust and harsh environments, fiberglass is a strong material. A cable fixed on this grid has a thickness of 3–4 mm.

Following the conversion of electricity into heat and its application to the flooring, the system heats up. All that’s left to do is roll this design out on the floor and style it.

The table below clearly outlines the primary benefits and drawbacks of this particular type of electric heated flooring in the form of tile mats.

There are various models of infrared warm floor mats available:

• One -core – has one heating conductor, so it costs significantly less than two -core. Has an increased level of electromagnetic radiation, but within the sanitary norms. In this regard, this floor is recommended for premises where people are not constantly, that is, a bathroom or hallway. Installation is more complex, since it is necessary to attach both ends to the thermostat, and the presence of a concrete screed is required. The advantages of this model – electricity consumption is not significant, despite the high heating temperature.

• Two -core – consists of two conductors: heating and conductive. This simplifies the installation of the floor itself, since it is not necessary to connect the second end of the cable to the thermostat. In addition, installation is possible for any floor covering. This design has a reduced background of electromagnetic radiation, which is suitable for installation in living rooms.

Features of choice, prices

As previously stated, you must select a mat beneath the tile based on the function of the space. It is worthwhile to buy two cores for living rooms and one core for installation in bathrooms, hallways, loggias, or bath rooms.

Prior to deciding to buy the Warm Paul system, you should research the following parameters:

• Is it suitable for flooring – ceramic tiles;
• which laying is planned (dry or wet);
• Whether the use of electrical safety is allowed to use mats.

The cost of high-quality models is roughly:

• one -core – 2300 rubles/m2, the power of which is 150 W/m2;
• two -core – 3200 rubles.

It’s critical to understand! The more tile that is installed in a warm floor area, the less per unit the product will cost. This means that the market price of the mat is greatly lowered when large quantities are purchased. Furthermore, the brand of the manufacturer has an impact on the cost. Thermomat, Electrolux, DEVI, and Ensto products are more than twice as expensive as systems from lesser-known manufacturers.

It’s important to consider the following brands:

1. Devi – manufacturer Denmark, produces high -quality products at affordable prices. Warranty period of 12 years.
2. Energy (England) – represents a large assortment of thermomes. In all models, the price and quality are perfectly combined.
3. Tepllyux – is a leader in the Russian market of manufacturers who produce high -quality warm floors.
4. Rehau – A German company, known not only with warm water floors, but also with termams.
5. Eltherm – German mats, durable and at affordable prices.

Keep in mind that different mats for tiles have varying powers depending on the brand and model when selecting them for a heated floor.

Preparatory work, laying and connection

Only an even base can be used for mat laying, so special preparation is required beforehand.

You must remove the previous coating and pour a concrete screed to prepare the surface for a warm floor for tiles. If there is a smooth surface beneath the old floor covering, you can simply add a crack to the crack.

The thermal insulation layer is applied after the base has dried. PPU and polystyrene foam slabs work well for this because they are rigid and resist deformations well. However, they ought to be at least 10 mm thick.

Installation of a thermomatom

First and foremost, you must mark according to the following specifications:

• the indent from the walls is at least 10 cm;
• From heating radiators – at least 15 cm.

Additionally, since mats creep under furniture with legs at least 10 cm long, you must arrange your furniture. It is not permitted to install the system underneath objects that have no legs or whose legs are shorter than the specified height.

The thermostat installation site is where the warm floor for porcelain stoneware is installed, and it continues to the opposite obstruction (wall or object) where the system will not be installed. When the mat reaches the wall, it is rotated 90 degrees, the net is severed, and it is spread out in the other direction. The quantity of these turns is based on the room’s size and is not restricted.

Mats must be fixed with heat-resistant adhesive or cement-sand mortar after they have covered the work area. To achieve this, a screed is used to apply insulation to the floor after each heating mat has risen. The beam then replaces the mat and crushes it. The excess cement mixture needs to be eliminated from the cable’s height. After that, you can begin laying tile right away.

Another layer of screed can be applied to the heated floor if desired. She will cause the floor to become more uniformly heated and more monolithic.

Connection

The warm floor’s heating is controlled by a thermostat that must be connected in order for it to be turned on and off. It also helps to keep the room at a comfortable temperature by preventing the cable from overheating. This device operates automatically, shutting off the power supply once the floor reaches the desired temperature.

The thermostat should be connected in accordance with the comprehensive schematic found on the device casing. It is wall mounted, between 30 and 120 centimeters above the ground. The thermostat is connected to a cable that will deliver power.

A coupling connects the heating elements to it. It connects to a standard outlet with a small portion of the mat. It is best to remove the feeding cable to a different machine if its length exceeds 10 m2.

Furthermore, the sensor needs to be connected to the thermostat in order to calculate the temperature. In order to install the sensor’s signal cable, you must first create a channel in the floor that goes between the heating cable’s loops. The temperature sensor is housed in a corrugated pipe with a wire enclosure. The free end of the pipe is well-insulated to prevent moisture damage.

Once the device is connected and the adhesive has dried, the system needs to run for ten to fifteen minutes. The floor is ready for use if it reaches a temperature of sixty degrees.

Installing heating mats for tile floors is a game-changing solution when it comes to insulation and home heating. If you place these mats under your tile floors, you’ll improve your home’s overall energy efficiency in addition to providing comfortable flooring. To provide a consistent heat distribution throughout the floor surface, this process entails arranging the heating mats in a strategic manner prior to tiling. This installation method provides comfort and practicality for any tiled area, be it a kitchen, bathroom, or any other area. Reduce your energy costs and environmental impact while bidding adieu to cold tiles and hello to a cozy, inviting space.

The laying of the tile

There are no unique considerations when installing tiles on a heated floor as opposed to any other surface. However, it is advised that the warm floor mats be poured with tile glue and screed to prevent damaging the heating elements.

Using epoxy resin instead of glue is preferable. It should be applied thickly to a fiberglass mesh after being diluted to the consistency of thick sour cream. The installation of the tiles can start once the glue has fully dried.

Using a gear spatula, glue is applied to the floor and tiles. After that, the tile is laid down and given a little crunch. A grouting composition should be applied to the seams once the glue has dried.

A tile warm floor system’s heating mat installation can significantly improve your home’s comfort and energy efficiency. These mats ensure a comfortable environment by distributing gentle heat from the ground up, which is especially beneficial during colder seasons.

The adaptability of heating mats for tile floors is one of their main benefits. Their ease of installation allows them to be used in kitchens, bathrooms, and other tiled areas of your home, including areas with ceramic tiles. Because of this adaptability, homeowners can take advantage of warm floors in all areas of their homes.

These heating mats not only improve comfort but also save energy. They contribute to a decrease in the need for conventional heating systems by effectively dispersing heat throughout the floor surface, which could eventually lead to energy savings and cheaper utility costs. Controlling the temperature in particular areas of the house also adds another level of efficiency and personalization.

In addition, the process of installing heating mats is not too complicated, particularly if it is done in the early stages of building or remodeling. Homeowners can easily incorporate these mats into their flooring system with the right preparation and direction, guaranteeing a hassle-free installation and long-term functionality.

To sum up, installing heating mats for a tile warm floor system has many advantages, such as improved comfort, energy economy, and simplicity of installation. These mats prove to be a wise investment that raises the standard of living in your area, whether you’re looking to remodel your house or include contemporary heating systems in your building project.

Video on the topic

Is it necessary to close the heating mat?

Electric warm floor for tiles. Fast installation in 10 minutes. Laying a heating mat.

Installation of a heating mat for tiles

Electric warm floor for tiles ✅ Installation of a heating mat

Laying tiles on an electric warm floor without filling it.