Installation of gas convectors

Selecting the appropriate heating system is essential for keeping your house toasty and comfortable throughout the colder months. An economical and effective way to heat specific rooms or areas in your home is with a gas convector heater. These small but effective units quickly produce heat using natural gas or propane, which makes them a popular option for homeowners trying to maximize comfort while reducing energy costs.

To guarantee optimum performance and safety, installing gas convector heaters requires careful planning and thought. It is important to determine your heating requirements and your home’s layout before beginning the installation process. Assess which spaces or rooms need heating the most, and choose the best places to install the convectors. To ensure compliance and safety, you should also become familiar with your local building codes and regulations regarding the installation of gas appliances.

The flexibility of installation options offered by gas convector heaters is one of their main advantages. These heaters are flexible enough to accommodate various room layouts and design tastes because they can be mounted on walls or set freestanding on the ground. Convectors that are wall-mounted are great for saving floor area and creating a clean, streamlined appearance, but freestanding models are more portable and convenient to move around as needed.

To avoid the accumulation of carbon monoxide and other dangerous gases, the assigned installation area must be ready for installation and adequate ventilation must be guaranteed. For gas appliances to operate safely, adequate ventilation is essential, so make sure you heed the manufacturer’s instructions and suggestions regarding ventilation needs. Additionally, for added security and peace of mind, think about adding carbon monoxide detectors to your house.

To guarantee correct setup and adherence to safety procedures, it is advised that gas convector heaters be installed by a qualified professional. Although doing an installation yourself might seem appealing, there are risks associated with using gas appliances, and any errors or omissions could have detrimental effects. By evaluating your home’s gas supply, making the required connections, and confirming that the system is operating properly, a qualified technician can reduce the possibility of gas leaks or other dangers.

Step	Description
1	Choose a suitable location for the gas convector, ensuring it"s near a gas supply line and has proper ventilation.
2	Shut off the gas supply to the area where installation will take place to ensure safety.
3	Mount the brackets or support for the gas convector securely on the wall, following the manufacturer"s instructions.
4	Connect the gas convector to the gas supply line carefully, ensuring proper seals and connections to prevent gas leaks.
5	Test the gas convector for proper functioning and check for any gas leaks using soapy water.
6	Securely attach the cover or casing of the gas convector.
7	Turn on the gas supply and test the convector again to ensure it"s operating correctly.
8	Ensure the area around the gas convector is free from flammable materials and provide proper clearance for safe operation.

Installation of a gas convector yourself

You will learn the following here:

Convectors that run on gas are not as common as those that run on electricity. Gas devices are not very safe and necessitate the presence of a cylinder or summarized centralized gas supply. However, gas models are less expensive to operate, making them a great choice for a country home or cottage where continuous heating maintenance is not necessary.

What is a gas convector

It is important to understand that a convector is not a boiler; rather, it operates on a different principle (heating the air within a specific room rather than the coolant) and has a slightly different range of use. Small homes without a continuous heating requirement are the typical applications for gas heaters. Only the room in which they are installed can be warmed by them.

What makes up the convector

The gadget’s design is not overly intricate, and it consists of:

Diagram of a typical gas convector that uses forced convection and a fan.

• heat exchanger, which heats the air;
• Programor – a device for monitoring and maintaining the temperature in the room;
• The control panel on which there are various indicators;
• gas valve for gas supply control;
• fan supplying air to the valve and heat exchanger;
• fan providing forced supply of warm air to the room.

The working principle of a gas convector

The scheme makes it clear that everything is very straightforward. The convector functions as a gas burner; cold air enters from below, heats up, and escapes through the opening at the top.

The gadget functions fairly simply: The idea behind how it works is called convection, which is the phenomenon where heated air rises and cool air falls. Gas models are capable of forced as well as natural convection. In the latter scenario, air is supplied using a specialized fan.

Benefits and drawbacks

Like its functionality, the device’s quality is based on its cost. You won’t save money if you choose a cheap model because it won’t last you more than a year. In this case, repair will not be profitable. As a result, we will only take into account the benefits and drawbacks of high-quality devices. Thus, advantages:

• efficiency and rapid heating of the room;
• simple installation of a gas convector with your own hands;
• there is no need to make a heating system (water);
• low price;
• Unlike electric counterparts, gas models do not burn oxygen;
• fully autonomous mode of operation;
• not tied to electricity (except for convectors with forced circulation);
• it is possible to connect the heater to the gas cylinder.

However, gas convectors do have some drawbacks:

• If gas is used from a centralized system, then be sure to obtain permission to connect the device;
• It is necessary to break the holes in the wall out where the heater will be attached;
• considerable dimensions;
• If you decide to install several convectors, then the gas will have to be brought to each of them, and only outside the building.

Devices can be categorized based on how powerful they are and how well they work. If power is all that is needed to make a decision—pick the person who can warm the room, for example—then case execution methods become slightly more intricate.

Two categories of heaters exist:

Wall models can blend in with the interior quite nicely.

1. Floor – devices are installed on the floor, do not require special skills and skills in installation. Such a convector can heat a fairly large room (even industrial), but has a large weight and requires a special basis.
2. Wall -mounted – more compact models that fit well into the interior of the house. Often, devices are mounted under the window to create a heat curtain from cold air passing through the glass. Convectors of this type have small power, so they are suitable only for heating rooms in houses up to 100 squares.

It’s important to consider the heat exchanger’s material when selecting a convector. The latter can be fashioned from copper or cast iron, as well as steel. These days, steel heat exchanger models are more popular, but because of the alloy’s qualities, cast iron heat exchangers are more efficient and have a longer lifespan. The heavy weight is their only flaw. Although pricey, copper analogs are reliable and efficient.

How to install a gas convector

Once you’ve decided on and purchased a heater, you can move on to installing it. Make sure the following equipment and supplies are present.

Equipment required to install a gas convector.

• drill and a set of drills;
• pipeline;
• set of wrench and divorce key;
• shoulder blade;
• punch;
• screwdrivers;
• plumbing and high -temperature silicone;
• dowels and screws;
• Gas crane.

Once everything is prepared, you must decide where to put the convector. Make the appropriate choice by using GOST. For the latter, installing the heater beneath the window is required. Try the device on at the designated location in the procedure and make the necessary markings afterwards. Don’t be too lazy to do this. The setting up of the premises is the next step. There will be a lot of dust created during the process, so cover the room.

Technical specifications needed to install a gas convector.

The following plan is followed during installation:

1. Determine the hole for entering the gas pipe. Do not forget to leave the distance to bring this very pipe and fitting.
2. On the diameter of the exhaust pipe, you need to drill a through hole in the wall using a punch. This is the most difficult stage, since the hole is large, so the work will be delayed in time (depending on the wall and the punch), and there will also be a lot of dust.
3. The next step needs to drill holes for fasteners of the heater itself and score dowels in them.
4. Now we connect an exhaust pipe to the convector and make the joint with silicone (capable of withstanding high temperatures).
5. The heater itself is fixed with self -tapping screws on the wall. Extraneous help is useful here, since the weight of the device is considerable.

Gas supply

Pay close attention to this stage. It is best to leave the connection in the hands of experts if you are unsure of your abilities.

Mounting in line with the following plan:

As per the GOST, the pipe needs to be installed from the street.

1. If there is a special discharge with a thread on a gas pipe, then this will make life easier. You just need to wind up a gas tap on the pipe. But if there is no divert, then it must be done.
2. Next, bring the pipe to the convector. It is better to use metal -plastic. Connection of fittings should be perfect.
3. During the laying of the pipe through each meter, it must be fixed for special clips. To do this, you also need to drill holes.
4. To check the connections, it is necessary to call an employee of the gas service.

Make sure to contact the gas service to have the connections checked for gas leaks before turning on the device.

Following installation, there needs to be a trial launch:

1. First of all, open the gas crane, listen to all the joints for possible leaks (you can use soap water or a special device). If the leaks are found, then close the tap and take care of their elimination.
2. After checking all the joints, start the convector. During the launch, clamp the button for a minute so that the gas penetrates the combustion chamber.
3. After the burner lights up, adjust the work of the device.

Finally

It is safe to say that the gas convector justifies its worth and the labor required for installation, even though it is not a very common heating tool. For a country house where you come to rest in the winter, this will be the best option. The heater uses less energy than its electric counterpart and can heat the air in the room rapidly. It can also consume gas. The fact that the gadget only heats one room—rather than all the rooms like the boiler and heating system does—may be its lone serious flaw.

Everything you need to know about gas convectors, including how they work, their types, benefits and drawbacks, how to install one by hand, how to connect gas, and how to conduct a test.

How to install a gas convector in a wood house correctly

There are benefits and drawbacks to installing a gas convector in a wooden house.

Features of use

First and foremost, people are worried about safety since gas converters have a somewhat low coefficient of positive effects and trees are quickly flammable, which increases the risk of fire while installing such equipment.

However, compared to batteries that require the installation of a large heating system to supply hot water, the installation process for the former is significantly simpler.

It happens frequently that a wooden house’s original design called for no heating at all, but that the owner changed his mind while it was in use, necessitating the installation of heating equipment. Since many gas convectors can operate using gas supplied from the cylinder rather than the highway, they may be able to meet such needs.

Depending on the gas source, you must visit a gas or fire service to get permission to install a gas convector in a wooden house, but otherwise everything should go according to plan.

Requirements for the room

Gas service requirements for the premises:

1. The ceilings should be at least two and a half meters, which is important, because many wooden houses are built with low ceilings, and this is with the smallest equipment;
2. The ventilation channel in the diameter should be equal to or exceed 100 mm, the material from which it should correspond to SNiP, and the lower part of the ventilation canal should be at least 200 mm below the ceiling;
3. The lower gaps on the interior doors should be at least 25 mm;
4. In each room, windows should be present allowing to ventilate the room;
5. The boiler room should be equipped with a door in a neighboring non -residential room, and when installing a boiler with a capacity of more than 150 kW, a separate entrance door;
6. The internally space of the boiler room should have at least 7.5 m3 in volume, for new houses this requirement was doubled;
7. The chimney – must be equipped with two walls, its diameter must exceed or equal to the incoming equipment pipe;
8. Lighting in the boiler room should be safe, open light bulbs are not allowed for this;
9. In the case of external electrical wiring, it must be placed in the channels specialized cable;
10. The system for controlling the regulation of the interior should be installed in a wooden house if the boiler is in the basement.

Installation of a gas stove and convectors

Installing a convector closer than 4 meters away from open fire sources, such as a gas stove, is prohibited. A dielectric insert in the hose meant for the convector will stop a fire from starting in the event that wood is used in a home’s wiring.

Grounding the outlets near the gas stove and convectors is crucial, though in a wood house, this needs to be done beforehand.

Three kinds of eyeliner hoses are suitable for use with a gas stove in a wooden house, specifically:

• Rubber – its plus is that it does not conduct electric current, but it is more susceptible to mechanical damage compared to analogues;
• Metal sleeve – when using it, a dielectric insert from the gas stove to the highway is necessarily inserted, but otherwise it has the best indicators among analogues. In addition, it is recommended by the last approved standards. Its only minus is the price, it bites;
• Rubber with metal braid – it is more capable of withstanding serious blows, and also thanks to the rubber core does not conduct current.

When purchasing a hose, take note of the coloring; the braid has distinctive yellow colors that are only used to identify gas equipment.

It’s important to consider the coating of a metal sleeve before purchasing one. Certain manufacturers who cater to different markets utilize yellow insulation that doesn’t meet basic requirements. When purchasing, always demand the accompanying paperwork, and keep them in a secure location.

The main advantages of gas convectors for wood houses

After dissecting all the intricate details that needed to be understood before selecting this equipment, the benefits of gas convectors for wooden homes are as follows:

• Economy – if a house made of wood is assembled in accordance with the rules and does not have shrinkage crevices, then a very small amount of gas will be required for its heating;
• The smallest boiler allows you to heat a room with a total area of up to 350 m3, and this is the size of a huge house, but subject to ceilings at the level of 2.5 meters;
• There are dual -circuit boilers that will supply your house with wood not only with warm, but also with hot water, the price is slightly higher, but the pluses on the face;
• To receive heat to the convector, you can use both automatic and manual ignition;
• Subject to the fulfillment of ventilation standards, the natural outflow of gas is made without difficulty, and the danger of their accumulation is not observed.

The installation process of a gas convector in a wood house

Nothing is simpler than attaching the converter to a wooden wall; to do this, you’ll need:

• Self -tapping screws;
• Crosshead screwdriver;
• Fasteners (come to the converter);
• Building level;
• Pencil.

The first thing to do is measure the separation between the loops that the gas convector is hung for. They are typically fairly wide, allowing you to move it on fasteners at a distance of roughly 5 cm to the left and right.

Measure the distance between the seat centers; it will be the same for the upper and lower loops. Transfer these measurements to the wall, keeping in mind the necessary height from the ground, which is typically between 10 and 20 cm.

Self-tapping screws that are at least 40 mm long are recommended in order to ensure a sturdy fix to the wooden walls of the house.

Put self-tapping screws in the designated locations, then check again—with the aid of a convector—to see if the distances line up before attaching the self-tapping screws. If so, attaching the hooks to the wooden wall is safe.

Once the fasteners are screwed in place, place a level on them and assess the slope in relation to the horizon. If necessary, the slope can be leveled by loosening and raising one of the mounts. A gas convector can now be mounted on a wooden wall.

Gas eyeliner to convector

Before the counter, cross the gas valve.

In every room, but especially in a wooden house, this process calls for extra care. Here, the most important thing to do is make sure that every component of the gas supply matches the description found in the supporting documentation.

Convector balls with a yellow handle marking are screwed onto it. They ought to be closed until the beginning of the start. Make sure there is a paranate gasket in the trooper nut of the hose before tightening the hose or sleeve to the gas cylinder or the highway.

Connecting the hose’s other end to the crane that is mounted on the gas convector is the next step. Additionally, you ought to see if a gasket is present here. After that, you must use unit keys to squeeze each and every connection.

Determine the force; if you don’t, the gas will flow through the system’s damaged parts. It’s crucial to avoid transmitting gaskets.

On the convector, gas and cranes can now be opened. For every compound, apply a foam solution using a shaving vestment. After confirming that there are no leaks, you can move on to the initial launch.

In a wood-frame home, windows are opened to allow for fresh air to enter at first.

In the realm of home heating and insulation, the installation of gas convectors emerges as a practical and efficient solution. Gas convectors, known for their ability to swiftly warm up spaces while consuming less energy compared to traditional heating methods, offer homeowners a cost-effective way to maintain comfortable indoor temperatures. With their compact size and easy installation process, gas convectors can be seamlessly integrated into various living spaces, providing consistent warmth without compromising on aesthetics. Moreover, their flexibility in terms of placement and zoning allows for customized heating solutions tailored to specific needs and preferences. By opting for gas convectors, homeowners can not only enhance the thermal comfort of their living environment but also contribute to energy conservation efforts, making it a win-win choice for modern households seeking both comfort and efficiency.

Gas convectors: installation of a gas convector

The range of heating devices available today is enormous. A gas convector is one such device. There are too many different companies’ gas convectors on the heating systems market. We will go into great detail about installing a gas convector in this article.

The cost and quality of the gas convector

Prices for gas convectors are formed depending on the manufacturer and the power of the device. The cost of the device is also affected by its quality. So, the gas convector of one Ukrainian manufacturer, bought last year for 900 hryvnias, the year has uninterruptedly functioned. In total, there were two such devices. One of them failed, having worked for 5 months. Further repair of the device turned out to be unprofitable. It was more advisable to buy a new gas convector than to repair the old. The second such device worked the entire heating season and was disconnected. With the onset of the next heating season, it was not possible to start the device. Its repair was also extremely unprofitable.

Which is untrue in the case of two Turkish gas convectors. These devices cost 1000 and 1,500 hryvnias, or $200 and $300, respectively, when they were bought last year. They were manufactured by a single company, differing only in power, and they functioned flawlessly throughout the heating season before being disconnected and reactivated with the arrival of cold weather.

As a result, you notice a noticeable variation in quality between manufacturers.

Types of gas convectors

The design and presence or lack of a fan, which accelerates the movement of warm air through a combustion chamber, is the only difference between convectors.

The power of gas convectors varies. The heated room’s volume is influenced by power.

The principle of operation of the gas convector

Natural gas is burned in the cast iron combustion chamber. There is a combined entrance pipe on the device. It allows the combustion products to exit the gas convector and allows the oxygen required for combustion to enter. The device doesn’t need a very impressive chimney to provide traction for combustion.

Now that we have completed the theoretical portion, let’s put our knowledge into practice and discover how to install a gas convector.

Installation of a gas convector

Supplies and equipment:

• Gas convector
• Metal -plastic pipe with metal fittings
• A pipeline
• Wrench for tightening threaded fittings
• Plumbing silicone
• Gas crane
• Punch with crown spatula
• Drill with a drill
• crosshead screwdriver
• High -temperature mounting foam
• High -temperature silicone
• Plastic dowels and self -tapping screws for them.

1. The first and most important step is the choice of a place for installing the convector. According to GOSTs, the convector should be installed under the window. What is it connected with, frankly, I don"t know. And, in addition, I saw convectors installed at a great distance from the windows. Perhaps the principle works here: for the money, any GOST will be customized for you. We will not go into these details. We are interested in the process itself.
2. So, having chosen a place for installation, you should try on the convector to the place. This can be done using a roulette with the transfer of size, or simply by applying the convector to the wall and noting the holes.
3. The following point is important – the input hole for gas. If it is located in the lower part of the convector, you should leave a sufficient distance to eyeliner pipe with clamping fitting.
4. After that, through the diameter of the exhaust pipe, punch a through hole in the wall with a perforator. This is the most time -consuming process. Get ready for the dusting of the room. Cover everything that is possible in advance by plastic wrap or rag.
5. After that, drill holes for fasteners and forget the dowels in them.
6. Insert an exhaust pipe into the hole in the convector. Process the joint with high -temperature silicone. Holding the convector in your hands, stick the pipe into the hole in the wall. Fasten the convector on dowels in the wall with self -tapping screws. This process is also quite difficult. The convector has a fairly heavy weight. In general, about the process described by me, there are many opinions. Here everyone acts as it is convenient, but my recommendations are repeatedly checked in practice and are the most reliable. As a result of the work done, you will receive a convector screwed to the wall and output pipe sticking out into the street.
7. Lay the cracks between the pipe and the wall with high -temperature foam.
8. Put on the end of the pipes a special cap included in the kit. It serves to prevent blowing the burner with the wind. The cap is attached on self -tapping screws, also included in the kit.

Now that the convector is in place, we can start using gas eyes.

Gas eyeliner to convector

1. GOST demands that the pipe suitable for the convector walk along the street. In accordance with it, we will act. If the gas pipe has a pre -displayed threaded connection, then we wrap a gas valve on it, blocking the gas supply to the convector. If the pipe does not have such a discharge, you will need to make it. The gas welder should be engaged in such work. Preferably a specialist from Gorgaz or a similar office.
2. When the gas valve is installed, the metal -plastic pipe should be carried out to the convector. Using roulette, calculate the length of the pipe, determine the presence of fittings.
3. We get a pipe and fittings. When buying a pipe and fittings, learn about the presence of a certificate of conformity for these pipes and fittings for this type of work.
4. Now lay the pipe, fasten it on clips through each meter. To install clip, drill holes in the wall.
5. When installing fittings, lubricate the pipe and fitting with silicone. This will give additional sealing. In addition, silicone will serve as lubrication and facilitate the installation of pipes.

An exhaust pipe with a cap, a gas pipe laid and connected to the convector, and a convector hanging on the wall should be the end products of the work.

Trial launch of a gas convector

1. Before starting, it is necessary to open a gas crane and pass at all the joints of fittings, threaded joints with a brush moistened with a aqueous solution of soap or shampoo. If you notice pouting bubbles, immediately block the crane and eliminate the leakage site.
2. Having controlled the joints, start the convector. To do this, click the gas supply button for about a minute, letting the gas go through the pipes and get into the combustion chamber.
3. Click on a piezo -booth. The spark will light the gas and a cheerful, blue flame will flash in the furnace.
4. Adjust the work of the convector, having achieved a comfortable temperature.

It is acceptable for there to be an offensive odor from burning oil during the first few hours of work. The combustion chamber is burned by the newly installed convector. Turn off the gas and carefully check the intersection of the exhaust pipe and the convector’s output if the smell persists for an extended period of time.

Be advised that all of the aforementioned tasks should be completed by specialists. Ultimately, installing the convector on your own robs you of the ability to have the device repaired under warranty. Furthermore, the convector needs to be approved by a Gorgaz or comparable service. An inspection project ought to exist. as well as all required licenses and commission findings regarding the device’s acceptance for use.

However, with this knowledge, you can direct the work of the operational office specialists who install gas convectors.

The range of heating devices available today is enormous. A gas convector is one such device. There are too many different companies’ gas convectors on the heating systems market. We will go into great detail about installing a gas convect in this article.

In order to heat a home quickly and evenly, gas convector heaters are an excellent and economical choice. They’re a popular option for many homes because installing them isn’t too complicated.

The ability of gas convector heaters to heat rooms quickly and provide comfortable temperatures almost immediately is one of their main benefits. Convector heaters are perfect for those chilly mornings or evenings when you need warmth quickly because they produce heat as soon as they are turned on, unlike traditional central heating systems, which can take some time to warm up.

Furthermore, gas convector heaters convert gas into heat with very little waste thanks to their high efficiency. This lessens the impact on the environment and lowers energy costs. Homeowners can have the comforts of a cozy home without sacrificing energy efficiency by choosing a gas convector heater.

In comparison to other heating systems, gas convector heaters are comparatively easy to install. Your home can be minimally disturbed and your heater installed quickly with the assistance of a qualified professional. Furthermore, a lot of models have placement flexibility, so you can put it wherever is most convenient for the best heating.

To sum up, installing gas convector heaters provides a practical and efficient means of heating your house. They offer a workable solution for keeping your living areas warm and cozy during the winter months thanks to their quick heating capabilities, energy efficiency, and simple installation procedure.

Video on the topic

Installation of the gas convector Akog

Plant convector – installation of the gas convector Akog

Plant convector – installation of the gas convector AKOG (RUS)

Gas convector atem (Zhytomyr). How to install and run.

Gas convector installation. How not to put

Installation of a gas convector in SIP house.

Convector. All you need to know about this.