Installation of a shower cabin with your own hands: step-by-step example on assembly and connection

Are you considering adding a new shower cabin to your bathroom renovation? Installing a shower cabin yourself can be a rewarding project that improves your bathroom’s appearance and functionality if you have the right tools and a little know-how. We’ll walk you through the steps of building and connecting a shower cabin in this step-by-step tutorial, giving you the confidence to take on this do-it-yourself project.

Getting all the tools and supplies needed is crucial before beginning the installation process. Usually, you’ll need the shower cabin kit, which comes with the cabin itself and fixtures like the handles, shower head, and drainage system. Basic tools like a screwdriver, wrench, level, drill, and silicone sealant are also necessary. Having everything ready in advance will make installation go more smoothly and with fewer hiccups.

Set up the area that will serve as the shower cabin first. Make sure the area is clear of obstacles, level, and clean. To ensure that the cabin will fit in the selected spot comfortably, measure its dimensions. Additionally, it’s critical to make sure that plumbing and electrical connections are accessible enough. An easy installation process is facilitated by proper preparation, which also averts future problems.

Now that everything is ready, it’s time to open the shower cabin kit and get acquainted with its parts. The majority of kits include thorough assembly instructions, so make sure to carefully read them before starting. Sort the hardware and parts into an assembly-friendly order. To fix the problem, get in touch with the manufacturer right away if any parts are broken or missing. You’ll be able to complete each step of the assembly process more easily if you have a solid understanding of it.

The shower cabin assembly is the next practical step. Starting with the base or tray and working your way up to the walls and doors, adhere to the manufacturer’s instructions. For stability and structural integrity, make sure each component is firmly fastened in place using the proper tools. Aim for precision in alignment and symmetry in order to produce a polished appearance. Take your time at this point to prevent errors that might require additional work in the future.

It’s time to connect the plumbing and electrical components, if applicable, once the shower cabin is fully assembled. When doing electrical work, abide by the building codes and regulations in your area. If you’re unsure, ask a qualified expert for advice. As directed by the manufacturer, install the shower head, handles, and any other fixtures. Before moving on to the last step, test the cabin’s functionality to make sure everything is operating as it should.

Applying silicone sealant to the shower cabin’s joints and edges is the final step in the installation process. This stops leaks and moisture damage by sealing the opening. Using your finger or a caulking tool, carefully apply the sealant along the seams, smoothing it out for a clean finish. Before using the shower cabin, give the sealant enough time to cure. After curing, your brand-new shower cabin is prepared for use, offering years of opulent and practical bathing.

How the shower cabin is organized?

The primary components of a shower stall consist of:

• a tray, equipped with a special metal frame for installation and height-adjustable legs, necessary for leveling the horizontal position of the installed product;
• the roof of the cabin, otherwise known as the ceiling panel;

• glass doors with special fasteners and a roller mechanism that facilitates the process of opening and closing them;
• the back wall of the cabin with side panels (if they are included in the model).

Crucial! The shower cabin’s assembly process becomes more challenging and time-consuming as its design becomes more intricate. Budget models are typically assembled and connected to the power grid, sewage system, and water supply without any particular issues. Modern models that include a sauna and whirlpool are put together by experts who are certified to install sophisticated equipment.

The shower cabin’s gadget is contingent upon the model and quantity of extra features.

Unpacking the elements before assembly

The shower cubicle’s primary components are packaged separately by the manufacturer. There are different numbers of packing places depending on the particular model. Typically, the product’s front wall and two doors are packed together. The back and side windows are in different packages. Along with the tray that holds the ceiling panel and all of its accessories, the center panel is sold separately.

Crucial! It is advised to store the glass panels upright, leaning them against the wall, after unpacking. The panels could sustain damage if they are kept horizontally.

The assembly instructions for the shower cabin need to be included in the package. Verify if it includes text written in Russian. Assembling sanitary ware from reputable manufacturers is simple when following the instructions’ comprehensive steps. Cheap models that are put together in China could come with unclear, misspelled instructions. In this instance, it is advised to preassemble the product in order to verify that the cabin is complete and that all required fittings are present—do not tighten the fasteners to the stop. Component material issues do not arise in pricey models.

It is advised to select a bathtub in certain situations when designing a small bathroom. This information will eliminate any remaining doubts you may have: Vanessa Ili Dashevaya Kabina: https://aqua-rmnt.com/voprosy/vanna-ili.html

Installing a shower cabin yourself can save you money and give you a sense of accomplishment. Before you start, make sure you have all the necessary tools and materials. Begin by measuring the space where you want to install the cabin to ensure it fits properly. Next, assemble the cabin according to the manufacturer"s instructions, making sure to follow each step carefully. Once assembled, connect the cabin to the water supply and drainage system, ensuring tight seals to prevent leaks. Test the cabin to ensure everything is working correctly before finishing up. Remember to follow safety precautions throughout the installation process to avoid accidents. With patience and attention to detail, you can successfully install a shower cabin and enjoy the convenience it brings to your home.

Main stages of shower cabin installation

The shower cabin assembly plan, in its most basic form, looks like this:

• Installing the shower tray and adjusting its horizontal position, followed by connecting the sewerage system;
• installation of the walls of the cabin around the perimeter of the pallet and the installation of the roof, as well as sliding doors;
• Connection of the shower cabin to the water supply;
• Connect the equipment to the power supply in accordance with the requirements of electrical safety in the operation of this type of sanitary ware;
• Checking the tightness of all connections and carrying out full commissioning work.

Installation of the shower tray

A construction level can be used to ensure that the tray is installed horizontally. For ease of work, remove the screen from the tray and adjust the legs if needed. With a lock nut, the leg height is firmly secured. After that, take off the protective film from each hole in the tray and begin attaching the drain. Use various sanitary connectors, rubber seals, collars, and sewer pipes with the appropriate diameter.

Repositioning the shower tray horizontally requires unscrewing the legs to the necessary height.

It’s crucial! Silicone sealant is used to lubricate every joint thoroughly.

After mounting the included accessories (such as a headrest or seat) by screwing the fasteners into the holes in the tray designated for that purpose, and after putting the drain plug into the drain hole.

Mounting the rear and side walls of the cabin

Prior to installing the back wall and side glass panels, all other equipment must be fastened to their surface, paying close attention to the layout and the positions of any technology openings.

It is sufficient to screw the nut by hand when installing the mirror; it is not advised to use an adjustable wrench. Using screws and bolts that are tightened with a screwdriver, the panel holding the liquid dispensers is fastened to the side wall. The actual liquid dispensers are mounted on the panel and are guided from top to bottom until a distinctive click sounds. Additionally, secure them in the locations indicated by the manufacturer:

• shelves for bathroom accessories;
• bracket for the hand shower;
• clips, on which the foot massager is hung;
• a decorative corner necessary for connecting the flexible hose for the hand shower;
• backrest with hydromassage jets, which provide lumbar massage.

Crucial! Silicone gaskets are used in all fasteners to prevent the metal components of the fasteners from damaging the glass panels.

Installation of the shower cabin’s side and rear walls

The shower enclosure’s front, side, and back walls are then individually fastened to the shower tray. In this instance, silicone sealant is used to lubricate the joints between the surfaces. Self-tapping screws screwed in from the back side of the cabin are used to secure the glass panels inserted into the aluminum profile frame.

Crucial! As soon as the product’s rear wall is installed, the water supply is set up. Concurrently, flexible hoses secured with unique clamps are used to link the shower cabin to the water supply. To stop leaks in the system, the clamps are further tightened after all connections have been installed.

Mounting the roof and doors

Before starting work, the protective film is removed from the roof to protect the surface of the part from damage during transportation and storage. On the front side of the ceiling panel, a decorative panel is attached to accommodate the speaker and fan. On the opposite side, the speaker itself and the fan are respectively connected using four self-tapping screws. Next, the upper tropical shower is assembled. LEDs, which provide illumination, are inserted into the plafond. The electric wire is led out through a special hole in the roof. The plafond together with the upper watering can is attached to the roof by means of a nut. The power supply unit is fastened to the rear side of the ceiling panel with self-tapping screws, after which it is installed on the glass enclosure of the shower enclosure. The roof of the cabin is fastened with self-tapping screws. The longest hose attached to the center panel is used to connect the rain shower to the water. Eight rollers (four for each door) are installed on the arc-shaped doors. Before installation the rollers are disassembled and then assembled in reverse order. Then proceed to fixing the handles, starting the installation of fittings from the inside of the cabin.

Once the handles are connected from the outside, place them on the fasteners that have already been installed and secure with side screws. After that, install the doors and use adjusting screws to fine-tune the door rollers.

Modifying the shower cabin doors’ roller mechanism

Connecting the equipment to the power supply

Without professional assistance, a shower cabin can be assembled by a large number of do-it-yourself artisans. Understanding the correct way to connect the equipment to the power grid is more challenging. The shower cabin must be connected to the electrical panel separately using a copper three-core cable with a cross-section of at least two square millimeters in compliance with electrical safety regulations.

Crucial! Install a separate 25 A automat when connecting powerful shower cabins that draw 5 kW of electricity per hour. It is best to invite a qualified electrician to ensure the equipment operates safely.

Doing the installation of a shower cabin yourself can be a satisfying project that enhances the value and convenience of your house. Taking on the installation process with confidence is possible if you adhere to a detailed guide such as the one that has been provided. Prior to starting, make sure you have gathered all required equipment and supplies and have thoroughly read the manufacturer’s instructions.

Take your time putting the shower cabin together, making sure that every part fits together correctly. To ensure that the cabin operates smoothly and to prevent leaks, pay special attention to details such as seals and connections. Please refer to the instruction manual or professional assistance if you run into any problems.

Connecting the cabin to the water supply and drainage system comes next after it is put together. To guarantee appropriate drainage and flow, pipes and fittings must be carefully positioned and fastened. Before continuing, make sure all connections are tight and functional.

It’s crucial to test the shower cabin after installation to make sure everything is operating as it should. To check for leaks, appropriate temperature control, and sufficient water pressure, run both hot and cold water through the system. Complete any necessary repairs or adjustments before concluding the installation.

Lastly, don’t overlook the importance of safety. To reduce the risk of injury, make sure that any exposed edges or corners are covered or rounded, and that the electrical connections are appropriately insulated and grounded to prevent shocks. You can take confidence and peace of mind in your newly installed shower cabin by paying close attention to detail and following safety regulations.

Video on the topic

Assembly of the shower cabin Triton

How to assemble Video Instructions for assembling a Glass Shower Cabin 120-90 with your own hands

Assembly and Installation of the shower cabin.

Assembling a shower enclosure Triton

Assembly of the shower cabin. Step-by-step instructions

How to install a shower cabin by yourself