How to replace the heating radiator in the apartment with your own hands?

Comfort and wellbeing during the winter months depend on keeping your house warm and inviting. The radiator is an essential part of a properly operating heating system. Radiators may lose some of their efficiency or experience problems that need to be fixed over time. Although replacing a radiator can be best left to a professional, if you have the right equipment and know-how, you can do it yourself.

Acquiring the knowledge of replacing a heating radiator in your apartment can help you take charge of home maintenance and save money on hiring a professional installer. It is a do-it-yourself project that many homeowners can accomplish successfully with the right advice and safety measures. This post will guide you through the entire radiator replacement process, from installation to preparation, so you can take on this task with confidence.

It’s important to comprehend how your heating system operates and the function of the radiator before beginning the replacement process. The main elements of a central heating system that distribute heat throughout your house are radiators. Knowing the fundamentals of how your radiator works will help you troubleshoot any potential problems and will help you know what to look for when replacing it.

There is more to replacing a radiator than just replacing the old one with a new one. For the installation process to go smoothly and successfully, proper preparation is necessary. This entails assembling the required equipment and supplies and exercising caution to keep your house and yourself safe. You can reduce the possibility of mishaps or errors and improve the effectiveness of the replacement procedure by being well-prepared.

When to replace heating radiators?

The high-rise structures constructed during the Soviet era were not initially designed with a long lifespan in mind. For this reason, the engineers did not account for the possibility of replacing the radiator with a straightforward overlap of water supply pipes.

The batteries don’t always need to be changed as a result. It is frequently necessary to replace the device with a customized one.

There are various justifications for installation and disassembly:

• Wear. Metal pipes, which every year in a row are in close contact with hot water, are corroded from the inside, wear out. As a result, in the fall during the operation of the battery, it will begin to flow and its use for its intended purpose will become impossible.
• Reducing the level of heating. This is due to the fact that deposits that thicken the walls of the battery accumulate inside the radiator over the years. As a result, heat does not reach the room, but remains inside the radiator system.
• Coloring. Sometimes having bought an apartment, it is found that the battery is painted with ordinary enamel and in several layers. The appearance becomes tidy, but the paint does not allow heat to get into the room.
• Impressive dimensions. Often apartment owners change radiators, t. To. Old cast -iron models look bulky. Now there are more efficient and compact devices on the market.
  Batteries sometimes change due to the fact that they do not fit into the overall interior of the apartment.

The ideal time to replace radiators is during the warm season, before the heating is turned on. Conveniently, since there is no need to switch off the riser. However, it is important to keep in mind that management firms can perform other tasks, such as hydraulic testing of heating systems, during the off-season.

Indicate whether a system test is scheduled for your home before beginning to replace the battery.

Every owner needs to be aware that the management company will only replace the radiator if it breaks during the heating season. To. The owner is required to keep an eye on the pipes’ condition and to apply ahead of time for replacement.

Preparatory work

The preparatory steps are the most important part of installing the radiator. The results of the replacement process rely on how carefully the battery was disassembled and what tools you have on hand.

The choice of radiators

Selecting which radiator will replace the existing one should be done first. The decision is made in light of:

• appearance;
• pressure indicator in the heating system;
• chemical composition of the coolant;
• prices;
• the level of heat transfer;
• Heating time and t. D.

In recent years, cast-iron battery models with advanced features have gained significant popularity. Customers place a great emphasis on the device’s price to quality ratio. However, biometric batteries, steel, and aluminum are the options available.

Necessary tools and consumables

The installation process for heating radiators involves multiple steps. You’ll need the following equipment for each:

1. Two keys: wretched and divided;
2. Apparatus for cutting metal pipes;
3. KUPP for cutting threads or a dick with the holder of the desired circle;
4. Polypropylene welding for pipes;
5. Scissors or hacksaw for cutting polypropylene pipes;
6. Level, pencil, ruler;
7. Plumbing linen;
8. Material for sealing joints;
9. Cement solution.

Among the parts required for radiator installation are the following:

• heating battery itself;
• Ball Valves;
• brackets for hanging the radiator;
• plugs;
• Maevsky cranes for air sustaining;
• Pipes: can be made of metal -plastic, polypropylene or steel;
• Accessories for installing pipes – tees, adapters, allotments and fittings.

Dismantling of old batteries

The process for disassembling the battery into an unusable state is determined by the work plan. If the radiator is the only part that needs to be replaced, you can use a grinding machine or twist the thread from the battery if the threaded joints are damaged and won’t work.

If replacing the heating pipe is necessary in addition to replacing the heating device, cut the entire structure. The procedure is performed between 15 and 20 centimeters from the ceiling and floor.

Marking to the wall

Transfer the marking to the wall to prepare the base. For this:

1. Out the place where it is planned to place the battery with a pencil.
2. Make a hole for holding brackets.
3. Take the level and check the evenness of all lines.

The entire radiator area can be covered with foil (or another foil material) and glued to the wall at the final step. As a result, the battery’s heat transfer increases.

We’ll walk you through the process of doing it yourself in this article: replacing the heating radiator in your apartment. You don’t need to hire an expert to complete this project if you have some basic tools and some know-how. From turning off the water supply to removing the old radiator and installing the new one, we’ll walk you through each step. To make sure everything functions properly, you’ll learn how to empty the system correctly, disconnect the old radiator, measure and install the new radiator, and then refill and bleed the system. You can increase the efficiency of your house and your heating system without going over budget by following these easy steps.

Step -by -step instructions for replacing the radiator

It makes no difference who turns on the radiator—you or the master. Everyone needs to become familiar with the replacement instructions. In the first scenario, the algorithm is required to ensure that the process is correct; in the second, it is necessary to determine how long the process will take to complete.

If the replacement work was completed during the warm season, lower the air and open the taps the day of crimping to ensure the compounds are tight. Consider carrying out the same tasks at the start of the heating season.

You can visit the management company in person or give them a call to find out when the allegations will be made public.

Features of marking and fastening schemes

Batteries are heavy objects. This is because of the material used to make the device and the coolant. It is not allowed to just hang the battery on the supply pipes. You need brackets in order to install on the wall.

Legs are an option for cast iron models that are to be installed on flooring.

Expert artisans recommend fastening radiators in two sections. Two fasteners are positioned beneath the upper manifold. Increase the number of supports if there are more than eight compartments. Perform the following calculation: Five sections in one bracket.

It is advised to install hooks in the heating device’s lower portion. This technique prolongs the radiator’s lifespan and helps totally eliminate vibration from the ceiling.

If only one battery needs to be replaced, use a level to mark the fastening location. You must create a template if you need to mount multiple batteries.

The following video demonstrates how to create a template:

• Clean the thread from the raid, dirt, dust using a metal jackpot.

• Determine in which direction the thread will be located.
• Apply a thin layer of paste for plumbing work.
• Separate a strand about 35 cm long from the total skein of flax. This is enough for a thread up to 2.5 cm. Straighten the segment in a flat strip.
• Press your finger with your finger to the drill and wrap the segment in the direction of the thread with one strand.
• Seal your finger.
• Apply a thin layer of paste for plumbing work.
• Probably the desired part on the thread.

Alternatively, fluoroplast tape could be used. The material will last roughly ten years in low-pressure areas, but this approach is inappropriate for apartments in multi-story buildings.

System test

Tests can be conducted independently or with the assistance of housing office staff. The algorithm

1. Resume the heat carrier supply to the riser.
2. From the new radiator, begin to release air a little with the help of the crane of Maevsky. After water goes instead of air, this will mean that the coolant reached the room.
3. Close the crane of Maevsky. Open the crane that is responsible for the intake of water into the battery.
4. Wait a few minutes. This is necessary so that the radiator is accurately filled with liquid.

If there are no leaks and no odd occurrences, the replacement was done correctly.

If the work was done during the summer, it is best to check and then close the taps. If not, the device may start to experience negative effects from the water in the radiator. Reopen the faucets to allow water to enter the radiator at the start of the heating season.

Although replacing a heating radiator in your apartment may seem like a difficult undertaking, it is completely doable if you have the necessary equipment and know-how. You can guarantee that your new radiator is installed accurately and effectively, contributing to the warmth and comfort of your house, by following a few easy steps.

First things first: before you start, make sure you have all the required equipment and supplies. This includes the new radiator, any extra fittings or valves you might require, pipe wrenches, pipe cutters, pipe sealant, and pipe sealant. Having everything ready will greatly streamline the procedure and avoid any needless delays.

Next, before you begin removing the old radiator, be sure to turn off the central heating and empty the water from it. This will keep everything from spilling or leaking, making the work much safer and cleaner. After removing the old radiator, spend some time cleaning the surrounding area and looking for corrosion or damage in the pipes.

Make sure you closely adhere to the manufacturer’s instructions when installing the new radiator. This include making sure the radiator is level and firmly fixed to the wall, as well as appropriately caulking all connections with pipe sealant. Take your time completing this step to prevent any errors that can later cause leaks or other problems.

Lastly, fill the central heating system again after the new radiator is installed, and look for any leaks or air bubbles. If required, bleed the radiator to release any trapped air and guarantee even heating. After everything is functioning properly, you can take pleasure in the warmth and coziness of your recently installed radiator with the knowledge that you saved money by doing it yourself.

Video on the topic

Replacement of heating batteries – how to replace heating batteries with your own hands

Replacement installation of a heating radiator in the apartment with your own hands

Binding – replacing the heating radiator in the apartment. Repair.