How to make a stove out of old car disks with your own hands

Want to make good use of used auto parts while simultaneously giving your house a touch of rustic charm and coziness? You need look no farther than making a homemade stove out of used car discs! This creative project offers an economical and environmentally responsible method of heating your space by fusing creativity and functionality. We’ll walk you through the process of making your own stove with easily accessible materials and basic tools in this guide.

Repurposing used car discs to create a workable stove not only offers a different kind of heating but also encourages sustainability because it uses materials that would otherwise wind up in landfills. Giving these discs a second chance will help you cut down on waste and lessen your impact on the environment. Repurposing objects in creative ways to give your home a distinctive touch also gives you a sense of satisfaction.

It’s crucial to comprehend the fundamentals of stove construction and safety before beginning the project. Even though this do-it-yourself stove is constructed from unusual materials, it still needs to be planned carefully and safety precautions must be followed. We’ll go over crucial factors like fireproofing, adequate ventilation, and heat insulation to make sure your DIY stove runs safely and effectively.

Making a stove out of used car discs is a creative as well as a useful project. You are free to personalize your stove to fit your tastes and go well with the style of your house, from layout design to finishing touches. There are countless options to consider, regardless of your preference for a sleek, contemporary style or a more rustic appearance. Prepare to let your imagination run wild as we set out on this do-it-yourself journey!

In this article, we"re diving into a fun and practical DIY project: creating a stove from old car discs. By repurposing these commonly found items, you can craft a cost-effective heating solution for your home while also reducing waste. This project not only adds a rustic charm to your space but also provides an efficient way to keep warm during chilly months. From gathering the materials to step-by-step instructions, we"ll guide you through the process, making it accessible for anyone with basic tools and a bit of creativity. Whether you"re looking to save on heating bills or simply enjoy hands-on projects, making a stove from old car discs is a rewarding endeavor that adds both warmth and character to your home.

Features, advantages and disadvantages of a homemade burzhuyka

You must comprehend the fundamental specifications for these kinds of products before you can assemble the stove. First, the number of elements is chosen based on the minimum height of the furnace, which should be at least 45 cm (and more if you stoke waste and raw wood, up to 65–70 cm). Secondly, it is preferable to create an ash pan at the bottom to make cleaning easier. Since the burzhuyka’s design is largely similar to that of other models, these options are in high demand. Here are the primary benefits:

1. The cost of manufacturing a burzhuyka for garage with your own hands from car disks is one of the lowest. The main parts can be found for free or at a minimum price, as old and deformed elements that can not be used on the machine will do.
2. Long service life. For the manufacture of disks use steel of large thickness, which will ensure the durability of the burzhuyka. It won"t go rancid in a few years.
3. The material is resistant to temperature fluctuations. Steel alloy withstands numerous heats without damage and does not deform over time.
4. Good heat transfer – due to the properties of steel, the efficiency of the stove is at least 80%. The room is heated very quickly, as the material gives off heat well.
5. It is possible to make a firebox of any size. The number of disks to be connected is selected according to the situation, there are no limitations.

Crucial: Only steel stamped disks are suitable for manufacturing.

Before choosing one, it is necessary to consider the drawbacks of this particular variety:

1. It is necessary to clean the chimney and the inner walls of the structure from soot at least once every 2 months. If this is not done, the efficiency of the system is very much reduced and the consumption of firewood for heating the room increases.
2. Steel heats up very quickly and gives off heat well, but it also cools down in a short period of time. Therefore, it is possible to properly heat the space only with a constant burning of wood in the firebox.
3. To ensure a normal draught, the height of the chimney should be 2 m or more.

This kind of burzhuika is generally nearly as good as pre-made solutions. Making it correctly and carefully welding the components together to ensure that there are no gaps is crucial. Additionally, installing a high-quality chimney is crucial because a system with inadequate draft will operate much less efficiently.

What tools and materials are needed for the manufacture of a firebox?

It’s easiest to visualize the finished product by browsing through network photos of bunting constructed from car disks. They can be put together in a variety of ways, and the list of materials varies depending on the design that is selected. But typically, you need this kind of kit:

1. Several steel wheel rims from cars, vans or small trucks. It is not worth using elements from large machines, as they weigh a lot, which complicates the work.
2. Sheet steel 5 mm thick or more. Quantity – so that there is enough for the bottom and the top part at least. It is possible to cut blanks in advance according to the outer diameter of the wheel rims.
3. Metal angle. It is best to use fairly massive elements with thick shelves.
4. Thick-walled pipe. Steel should be 5 mm thick or more, so that the chimney does not burn and serves for a long time.
5. Armature with a diameter of 20-24 mm. The grates will be made of it. You can also adapt a ready-made cast iron element by giving it a suitable shape.
6. Bolts and plates may be required for mounting. If you need to paint individual parts, you should buy heat-resistant paint.

Crucial! It’s worth getting the right size hinges in advance to fix the doors.

To complete the task, a specific set of tools must be gathered; otherwise, it will not be possible. Since the production of birzhuykuka requires the use of welding equipment, it is important to plan ahead for protection and wear a special welder’s suit or clothing made of naturally non-combustible materials. It will be necessary to have the following:

1. A welding machine and electrodes of suitable thickness. You can rent equipment to save money.
2. Angle grinder. Purchase several cutting and stripping disks for it at once. You may also need a wire brush to remove deposits and rust from the metal.
3. Drill and a set of drills of different diameters. Measuring tools – marker, tape measure, angle, etc.д.
4. Hammer, metal brush, vise, etc.д. – It"s best to have everything you might need on hand.

The best place to complete the task is outside, preferably under a canopy or, in nice weather, right next to the garage. If the space is well-ventilated and lit, you can construct a firebox with old disks by hand.

How to make a burner from car disks with your own hands for the garage

You can get to work if you have everything you need on hand. It’s crucial to adhere to straightforward advice and complete tasks in a specific order. Consequently, the instruction is broken down into multiple stages for ease of understanding.

Body assembly

Make sure the disks are free of corrosion and dirt first. Remove and paint as soon as you can to avoid burning and an unpleasant odor at first. Typically, the construction consists of four components, which is sufficient to build a firebox to the required height. Follow these steps:

1. Cut out the inside of the disks to create a cavity inside. Work carefully, it is necessary to remove all excess, but at the same time do not damage the outer walls. It is best to do it with a gas torch, it turns out quickly and accurately.
2. If the elements for the bottom and top were not prepared in advance, make them from sheet metal. Next, stack the disks on top of each other, make sure they fit together evenly, if there are any irregularities on the edges, you can trim them with a hammer. Also be sure to clean the surfaces to be welded, there should be no paint and traces of corrosion on them.
3. First, carefully weld all the disks to be connected around the perimeter. Try not to skip any section to get a continuous strong seam, which will withstand multiple heating without problems.
4. Next, weld the bottom and the upper part to obtain a sealed body, which will serve as a stove in the future.

It is advisable to tack the elements in multiple locations before welding. You can weld the entire length of the joint after making sure it is straight. After the task is completed, let the components cool fully.

How to make legs and doors

It is best to purchase pre-made doors or have them welded beforehand from angles and sheet steel due to the uneven surface of the disks. The most important thing is to create elements that are the right size; there are no special requirements. For the doors to be easily opened and closed, it is crucial that the latches be straightforward and the hinges be strong. The following is how the work is completed:

1. First of all, make a small blow door in the lower part of the boiler. With its help you can regulate the air supply, also from there you can remove the ash as it accumulates. An opening of suitable size is cut, angles and plates are welded into it to create a frame, then the door is placed.
2. Above, place the main door of the firebox, it should be of such a size as to provide a convenient laying of firewood. It is important to cut out the opening, reinforce it with a corner and weld or bolt the sash to it. It should be easy to open and tightly closed, fixed with a latch.
3. The legs should ensure the stability of the structure and prevent it from tipping over. It is most convenient to pre-weld the base from a corner or square tube, and then weld it to the bottom of the birzhuyka.
4. Weld a few pieces of angle between the doors inside the casing. They will serve as a support for the grate, which is easiest to weld from rebar. Make the grate smaller than the diameter of the stove, so that it does not rest against the walls when heated up.

One option is to use pre-made cast iron doors, in which case the frame is bolted through the holes and welded to the casing. Fitting standard-sized elements for conventional stoves can be found in hardware stores.

How to make an exhaust pipe in a homemade firebox

You must build the chimney correctly in order to guarantee a regular draught and keep smoke out of the space. The most common steel pipe used for this purpose is one with thick walls and a diameter of approximately 100 mm or slightly larger. Method:

1. Determine the location of the pipe inlet in the heater housing. It is easiest to make it in the middle from the top, this will ensure a good outflow of combustion products and improve the draught. If the upper part will be used as a stove for cooking, it is better to connect the pipe to the side.
2. The tapping point is easier to design with the help of an adapter, which you can make in advance. Then you will not have to make a perfectly even hole in the bun, which will simplify the work.
3. After welding the chimney to the body, lead it outside and securely fasten it in place. Remember that its length should not be less than 2 meters, and it is better even more – to improve traction.

Crucial! The section of the chimney that passes through a wall or ceiling partition wall can be covered with non-combustible insulation because the chimney’s surface heats up quickly.

You can bend the chimney to cut down on the amount of firewood used. However, keep in mind that soot is deposited more heavily in areas where the pipe’s direction changes. Small hatches should therefore be made there, and the chimney should be cleaned at least once every two months.

Watching the video on creating a homemade bourzhuika in the garage using car disks is also highly recommended. There is a clear explanation of the procedure, which will aid in comprehension and make assembly easier.

Constructing a stove from used car discs is an inventive and useful way to recycle materials while enhancing the warmth and appeal of your house. You can assemble a workable heating solution that not only minimizes waste but also lowers your heating costs by following easy instructions and utilizing inexpensive tools.

The affordability of constructing a stove out of used car discs is one of its main benefits. The main investment is in the insulation materials and any additional components you may need, as the discs are frequently free or inexpensive. Because of this, DIY enthusiasts of all skill levels can complete the project.

Additionally, building a stove out of car discs enables customization to meet your unique requirements and tastes. You have the option to design the stove to fit your desired aesthetic, be it more polished, industrial, or rustic. You can also change the shape and size to fit the available space in your house.

A stove built from used car discs is not only affordable and multipurpose, but it also has effective heating capabilities. The substantial metal discs hold heat well, giving your living area a constant, pleasant warmth. An even distribution of heat is ensured by proper insulation, which increases its efficiency and reduces energy waste.

All things considered, building a stove out of used car discs is a fulfilling do-it-yourself project that encourages sustainability in addition to being functional. You can benefit the environment and enjoy the coziness and comfort of a homemade heating solution by repurposing materials that would otherwise end up in a landfill.

Video on the topic

IT IS INGENIOUS – WHAT CAN BE MADE FROM WHEEL DISKS ?

An oven made of car wheels. An oven made of car wheels.

Oven for a cauldron from car disks with your own hands. The secret of the car disk. DIY.

DIY BBQ Grill Manghal made from a car disk | DIY BBQ Grill

Disk cauldron stove / Mistakes / How to do it right