How to make a septic tank from European cubes with your own hands-a detailed photo instruction on installation

The septic system is an important but frequently disregarded part of home maintenance. The environment and the health of the occupants of the home depend on proper waste disposal. But if done incorrectly, installing a septic tank can be expensive. Fortunately, building a septic tank out of European cubes is a cost-effective and do-it-yourself option. We’ll walk you through the process of installing your own septic tank step-by-step in this comprehensive photo instruction.

European cubes are a common and reasonably priced building material. They are also referred to as concrete blocks or breeze blocks. You can build a dependable and durable septic tank without going over budget by repurposing these blocks. This do-it-yourself method not only saves you money, but it also gives you the freedom to alter the size and shape of your septic tank to fit your unique requirements and property layout.

The fundamentals of septic system operation must be understood before beginning construction. Septic tanks are basically big subterranean tanks that hold and process your house’s wastewater. While liquid waste exits the tank into a drain field for additional filtration and soil absorption, solid waste settles at the bottom of the tank. For your system to last a long time and to avoid contaminating the environment, proper septic tank installation and maintenance are crucial.

Let’s now go over how to construct your own septic tank using European cubes step-by-step. We’ll go over everything you need to know to finish this project successfully, from site preparation to the final inspection. We’ll provide you with thorough photos along the way to help you navigate every phase of the building process. You can construct a dependable and efficient septic system for your house by carefully following these instructions and taking the required safety measures.

What are the advantages of the septic tank over other designs?

• prevention of the spread of an unpleasant odor;
• lack of soil infection with products of human life;
• The unnecessary in the services of the Assenizers, the cleaning of the septic tank is quite rare and it can be performed independently;
• The septic tank will serve much longer than the cesspool.

Choosing the correct capacity volume

The amount of effluents determines the size of the septic tank. The number of occupants in the house and the operating period are the determining factors for their volume. During the summer, a small-volume design works well for temporary use, and daily drain cleaning is required for year-round septic tank use.

The number of occupants in the house determines their volume. It is assumed that each person uses 200 liters of water per day. Calculate each resident’s daily water consumption by focusing on this value. Three times this indicator’s volume should be the capacity of the septic tank. Selecting a septic tank with a marginally larger capacity is advised in light of the unanticipated rise in effluents.

Where to place a septic tank on the site?

The sewer structure should be placed away from the water fence. There is a 50-meter minimum separation. A septic tank must be installed at least 6 meters away from the building’s foundation, but it shouldn’t be installed too far away from the building either.

Septic placement plan in relation to other items

Every extra meter reduces the level of septic tank installation because the sewage system needs to have a sufficient slope. Furthermore, a lengthy pipeline increases the likelihood of blockages. I will have to build viewing wells in order to get rid of them. Furthermore, a septic tank should not be located more than three meters from a neighboring property.

Play preparation and reason for installation

Prior to building a septic tank out of Eurocubs, you must dig a trench and a hole for the sewer pipes. The volume of the installed chambers plus 15 centimeters on each side is used to calculate the size of the pit beneath the septic tank. The size of the Eurocubs and the sewer line’s slope—which should be at least two centimeters per meter of pipeline—determine the pit’s depth.

Concrete is poured to a depth of fifteen centimeters into the foundation pit. Loops must be created for the cubes to "anchor" during this process in order to prevent the soil waters from squeezing them out. The trench starts at the house and ends at the septic tank installation location. The trench’s slope ought to be in the direction of the septic tank.

Preparation of Europeancubs for further installation

It is necessary to prepare the container before beginning work. At this point, the European cubes themselves have holes drilled for the input and output pipes as well as ventilation, and the drain is sealed in the lower portion of the container.

To prevent effluent leakage, the European cub’s lower drain needs to be sealed.

To get ready to use two Eurocubs as a sewage system, you will need pipe segments (D = 10-15 cm) and four tees. The tee is inserted by making a P-shaped cut around the neck and bending the edge.

You must cut the tee in order to fit it into the container. It should be big enough to fit through the tee.

You must drill a hole in the first cube to accommodate the pipe that leads from the house. After cutting the necessary length of pipe, it is inserted into the hole created and connected to the tee.

A house sewer pipe is inserted into this opening. Don’t forget to look for elastic bands when connecting the pipes.

The tee is inserted into the container and attached to the pipe that is coming in.

A hole is cut out above the tee and a piece of pipe (d = 5 cm) is inserted for ventilation. An output is made on the opposite side of the container and ought to be positioned underneath the input. The same hole is made in another European cub, but this time it takes into consideration that the cube will be situated 20 cm below the first. To fully utilize the second capacity’s volume, this is required. Tees must be attached to the pipe that runs between the two tanks, which has ventilation outputs mounted on top of it.

Tees must be connected and ventilation outputs installed on both sides of the pipe that connects the container.

Additionally, a hole is made for a drainage pipe to enter the aeration field. Sealant should be applied to the joints once all of the pipes have been installed.

Sealant needs to be applied carefully to every connection.

In addition to being sealed with sealant, the neck seam is riveted shut. On top, a waterproofing layer is felled.

Melting a layer of waterproof material around the neck

It is essential to firmly secure the containers to one another in order to prevent them from moving in relation to one another. The Eurocubs’ framework is welded together among themselves to accomplish this. For a more resilient fastening, reinforcement is utilized.

The European cubs are prepared for installation once they have securely attached to one another.

Managing home wastewater can be done economically and effectively by building a septic tank out of European cubes. You can build a septic tank that meets your needs and has the least negative impact on the environment by using the appropriate materials and doing careful installation.

You can confidently take on this project yourself, saving money on installation costs and guaranteeing the system is customized for your property by following a thorough photo instruction guide. Every stage, from digging the hole to attaching the pipes, is essential to the longevity and performance of the tank.

The stability and longevity of European cubes are two of their main benefits. These robust bins offer a solid base for your septic tank, able to support the weight of dirt and effluent without losing structural integrity.

In order to keep the septic tank at the ideal temperature, encourage the decomposition of waste, and avoid freezing in the winter, proper insulation is crucial. You can improve the effectiveness and performance of your septic system by including insulation materials in the design.

To ensure that your DIY septic tank continues to function, regular maintenance is essential. Plan on doing routine pump-outs and inspections to get rid of accumulated sludge and stop possible problems. Your DIY septic tank can provide your home with dependable service for many years to come with the right maintenance.

We’ll take you step-by-step through the process of constructing a septic tank in your backyard using European cubes in this extensive guide. You’ll discover how to install a septic tank effectively and efficiently with the help of comprehensive photo instructions. We’ll take care of everything, from setting up the area to arranging the cubes and attaching the required pipes. You can guarantee appropriate waste management for your home and save costs by handling it yourself by following this guide. Whether you’re a do-it-yourselfer or a novice project manager, this guide will provide you the skills and assurance needed to construct a working septic tank from the ground up.

Video on the topic

I was mistaken, but it works! He himself made the simplest septic tank.

Septic tank from European cub

Septicik from Eurocubs, DIY sewage

Home Septicik without pumping with your own hands for 8500! The simplest sewage system.