How to make a box and hide pipes in the bathroom: examples of work and useful tips

When remodeling a bathroom, the room’s aesthetic coherence is equally as crucial as its practicality. Your bathroom’s sleek design and clean lines may be compromised by exposed pipes. Fortunately, hiding these pipes with a box is a useful and fashionable fix. This guide will give you examples and advice on how to cover up bathroom pipes so that your room looks and feels better overall.

Although boxing in pipes can seem intimidating at first, it’s a great way to give your bathroom a unique touch. Your chosen design and materials can work in harmony with your current decor, whether you’re going for a more ornate or minimalist look. We’ll look at several reasonably priced and aesthetically pleasing materials and techniques.

Enclosing your bathroom’s pipes not only makes them look better, but it also keeps them safe from potential harm. In colder climates where exposed pipes are more likely to freeze, this can be especially crucial. We’ll go over how to make sure your pipe boxing is both aesthetically pleasing and useful, allowing for simple access for upkeep and repairs without sacrificing design.

An eyesore can become an asset with the right equipment and some preparation. Come along as we explore the doable methods for concealing those ugly pipes and creating a clean, organized bathroom. Even if you are a novice at this project, our advice will help you attain a polished appearance.

What is it better to make a box?

The right material must be chosen for the box that will conceal the bathroom pipes before unsightly communications are closed. He needs to fulfill a few prerequisites:

• have sufficient moisture resistance;
• have little weight and thickness;
• made from environmentally friendly ingredients that do not distinguish harmful substances.

Therefore, the following materials that are offered for sale for the bathroom box can be used: moisture-resistant plastic, moisture-resistant drywall, moisture-resistant plywood, and MDF.

Preparatory stage

Joints are the most common locations for pipeline malfunctions. Consequently, it is preferable that they be smaller. Make sure there are as few connections in the highway as possible if the box is installed after new pipes are laid. Before concealing the pipes in the bathroom, if pipeline replacement is not part of your plans, make sure they are thoroughly inspected. Check all of the highways to see if any flaws have been fixed.

It is thought that you can seal the welded and sealed joints without worrying about leaks. However, free access should apply to the fittings with threaded connections. Periodically carrying out their inspection is required. Threaded formations therefore cannot be walled up. Free access to the valves, sewage audits, counters, and filters is also required.

The manufacture of the box step by step

There are various steps involved in getting the box installed in the bathroom. Give each of them a closer look.

Measurement and determination of the size of the structure

You must take the required measurements and determine the box’s location before sealing the pipes. In locations where joints are not reliable, such as counters and valves, a detachable component or door must be provided. The scale on which all constructive details will be marked will not be impacted by the premises on the scale. Remember to account for the finishing material’s thickness when taking measurements.

Calculating the quantity of material needed for manufacturing is essential. Beginning at the floor, markings are made for the box-shaped frame that closes vertical pipes. The minimum distance that should exist between the pipes and the box is 3 cm.

After determining the future structure’s shape on the floor, they transfer it to the ceiling using a plumb line and mark the walls accordingly.

Installation of the frame for subsequent casing

Installing the frame around the pipes is necessary before sewing communications into the box. The ideal starting point is a galvanized profile. It is not recommended to use wooden bars in the bathroom because the air is constantly moist. If you do choose to use them, go for bars composed of decay-resistant rocks. Additionally, apply an antiseptic to all wooden components before using.

With the aid of a clearing or self-tapping screws, the frame elements adhere to one another. Dowels and euro-shurups are used to the wall in order to fix the profile.

Because the finishing material will not fit closely enough around the pipes, it is necessary to mount the profiles to the wall.

The profile is mounted on the walls first. The front line is then formed by the installation of the racks.

The number of front racks or the number of front racks in a future box will depend on its design. They are fastened using suspensions or their own bent edges.

The guides are then installed on the floor and ceiling.

Using a clearing makes it easy to fasten vertical and horizontal profiles to one another.

Make jumpers between the racks if their combined length exceeds 1.5 meters. They will also be required for a frame that is wider than 0.25 meters. The jumper is separated by no more than one meter.

Jumpers are fastened to racks with a height greater than 1.5 meters to increase the structural strength.

If you’re using a wooden frame, use building mastic to smooth out the cut spaces. This will shield the box from harm and stop it from deforming during the temperature-humid vibration process.

Carcass casing of the box with sheet material

When cutting the box’s details, attempt to create whole pieces rather than fragments. Cut the side sections first. They were sliced so that the edges were flush with the frame profiles rather than advocating for them. The box’s front is then cut out after that. She needs to shut off the side sections.

The material is cut and then installed onto the racks. Use self-tapping screws (3.5–4.5 cm) to assemble it. There should be no more than 2.5 cm separating them. Fixing the material to the jumper is not necessary because the box will be strong enough. Doors and observation holes are left in the pipeline to control its weaknesses.

It is essential to leave a hole in the box so that the valves, counters, and filters can be accessed freely. It can be concealed by a door that you buy at a building supply store.

They can be bought already made or constructed on your own. A door is made of the same material used for the box itself for your own manufacturing locations where pipes are accessible. Furniture magnets are fixed on them so it doesn’t open.

The control opening door can be finished using the same material as the box as a whole. therefore it won’t be as obvious.

A fully collapsible box can be constructed. Finishing material sheets are fastened to self-tapping screws at the very edge for this purpose. They do not use tiles to close them, giving the final finish.

Finally, skirting boards or plastic corners are fixed. Оогда будет демонтировать короб, плинтус убирают, саморезы раскручивают и отделочный материал.

In an emergency, the self-tapping screws that are closed with a plastic corner can be easily twisted to disassemble the box. The box is then still whole and ready to be mounted.

The final decorative finish

The box’s finish is the last step in the installation process. Depending on the material used to create the design. MDF, drywall, and plywood can all be painted or lined with ceramic tiles. Extra decoration is not necessary for plastic panels. They appear quite appealing in themselves. Plastic does not take up less space in a room than drywall does.

Construct a frame from the profile to adorn the bathroom.

In the same manner, the pipes beneath the bathroom are sealed. Prior to sheathing, the frame must first be mounted; the control doors remain exposed.

Mounted over the frame from the profile, moisture-resistant drywall is tiled on. Make sure a door is left open for pipe maintenance.

With your newfound ability to mount the box, you can adorn any bathroom pipe and enhance the aesthetic appeal of the space. The layout of the bathroom facilitates better communication concealment. Furthermore, there is less noise coming from the pipes once they are closed.

Building a box to conceal bathroom pipes enhances the room’s aesthetic appeal while shielding the plumbing from damage and dust. This do-it-yourself project is a great way to meet functional needs and personalize the appearance of your bathroom. Anyone, from novices to experienced do-it-yourselfers, can achieve a neat and tailored finish by using the examples and advice given. Recall that precise measurement and the selection of materials resistant to moisture and repeated use are crucial.

It’s critical to keep in mind future maintenance needs and access to shut-off valves and joints throughout the process. A well-thought-out box should have accessible locations or detachable parts so that plumbing can be accessed without having to take the entire thing apart. Additionally, safety is of the utmost importance, so use materials and tools appropriate for bathrooms and always follow building codes and standards in your area.

In the end, enclosing bathroom pipes improves the functionality and aesthetics of your bathroom rather than merely concealing unsightly components. This project can increase the value of your house and give you a sense of accomplishment if you approach it correctly. It is an investment that pays off in terms of both utility and aesthetics to take the time to do this task well, whether your goal is to sell your house or just revamp your living area.

A well-thought-out box designed specifically for the purpose of hiding bathroom pipes can both improve the look and feel of your room. In addition to tidying up ugly plumbing, this do-it-yourself project gives you the chance to spruce up your bathroom with additional storage or artistic accents. Through a methodical approach and the use of basic materials like moisture-resistant drywall or plywood, homeowners can create a custom enclosure that complements their bathroom’s design. Accurate measurement, careful material selection, and the incorporation of access panels for future maintenance are all crucial advice. For those who want to improve the appearance of their bathroom, this is a worthwhile project because these doable steps guarantee a tidy and polished finish.

Video on the topic

Do not make repairs in the bathroom without watching this video.

The gypsum plasterboard box is the most reliable and strong connection of the profile

Try to avoid horizontal boxes in the bathrooms | Repair of apartments in Moscow

So that the pipes in the toilet do not catch your eye, turn them into a decor item