How to lay a warm water floor on a loggia or a balcony with your own hands

It doesn’t have to be difficult to transform your chilly loggia or balcony into a comfortable haven during the colder months. Installing a warm water floor, a system that improves the comfort of your area in addition to providing warmth, is one practical solution. With the correct advice and a little do-it-yourself spirit, you can confidently take on this project. We’ll show you how to install a warm water floor on your balcony or loggia in this guide, enabling you to create a cozy haven at home.

The advantages of a warm water floor system must be understood before beginning the installation process. A warm water floor, in contrast to conventional heating techniques that depend on forced-air systems or radiators, distributes heat uniformly throughout the surface, preventing cold spots and guaranteeing constant warmth. This not only improves comfort but also encourages energy efficiency because the desired degree of warmth can be reached with lower water temperatures.

Optimizing space utilization is one of the main benefits of adding a warm water floor to your loggia or balcony. Conventional heating solutions frequently have large, bulky radiators that take up valuable floor space or obscure views. Alternatively, you can maximize your outdoor retreat by freeing up valuable square footage with a warm water floor system installed beneath the flooring.

Furthermore, a warm water floor gives you the freedom to adjust the room’s temperature to suit your tastes. A warm water floor makes it simple to customize the heat output to your preferences, whether you want to keep the temperature cozy for morning coffee or create a cozy atmosphere for relaxing on chilly evenings. This degree of control guarantees that your balcony or loggia is always a warm haven.

Is it possible to lay the warm water floor on the loggia, is it allowed or not

• Provide protection against water flow in case of pipe rupture.
• Get an official permit for the redevelopment of the apartment.

To put it mildly, there is question about the legality of installing water heating on the floor surface. The Housing Code states that heating balconies or loggias with the central heating system is strictly prohibited. As a result, following the neighbors’ complaints regarding housing and communal services, the legality of the redevelopment will be evaluated in court, and a fine along with the requirement to disassemble the floor will be imposed.

How to insulate the floor of the balcony for water heating

You should take precautions to ensure that the heating system can operate for a long time and without unpleasant failures if the potential consequences of leaving water warm floors unaddressed are too great to be ignored.

The first question to be answered is: Is it really necessary to install thermal insulation?

Definitely, the basis needs to be insulated. Thermal insulation aids in preventing the water circuit from defrosting and the production of copious amounts of condensate. The living area should be the only thing heated by the balcony’s individual heating system, not the neighbors’.

What material is suitable as thermal insulation?

The balcony floor’s fluid heating device is not the same as the conventional water circuit installation technique. The concreting installation method is inappropriate for this particular room. Foam is therefore not to be used.

On the one hand, installing premium roll insulation with a foil covering would be the best course of action.

A polystyrene matting system can be used to insulate floor water heating. The material serves as the foundation for pipe laying in addition to its heat-insulating properties.

How to make a water floor on the balcony

The following steps for laying the floor must be followed in order to lay the heating circuit:

• Base – preparing the floor for laying pipes includes pre -alignment of the surface, laying waterproofing and thermal insulation. At the same time, work is carried out to seal the cracks and insulation of walls and ceiling in the room.
• The calculation of the water heated floor – the pipe consumption depends on the chosen step of laying and the diameter of the circuit. On average, it will take from 3 to 7 meters of pipe for every 1 sq.m.
• Pipe laying – the contour is traditionally mounted in two ways: a snake and a snail. For a balcony or loggia, the first laying option is more suitable. The pipe is fixed on mats using special latches.
• Write down from the heating system is the most economical, but not always the best option to connect the pipe. You can power the system from the central heating battery, or make a special insert into the riser.
• Installation of the collector on the balcony – using the knot of the admixture, it is possible to control the heating of the surface and prevent overheating of the floors.
• Laying of the flooring – competently conduct water heating on the balcony – this is only half the task. It is required to competently select the type of flooring. Practice has shown that for the balcony or loggia the optimal solution would be cladding with ceramic tiles.

The warm floor installation technology necessitates the pressure testing of a water circuit prior to its activation.

Temperature connection and control

You must correctly connect and adjust the contour work if you want the loggia’s water warm floor heating system to function flawlessly and offer the most comfortable way for people to stay on their property.

The coolant in the risers typically has a temperature of between 60 and 70 °C. It is necessary to more than double the amount of heating when dealing with warm floors. How would one go about doing that?

Installing a thermal attenter or control unit that independently modifies the water circuit’s operation is an option. A floor-laying project must be made if it is intended to heat the rooms and balcony at the same time.

I can install the loggia’s floor and connect it to the central heating system, but all I can do is check to see if the risers’ coolant is missing. There are only two annual water drains. The coolant is in the pipes under pressure for the remainder of the time.

Your loggia or balcony will be much more comfortable if you install a warm water floor in it, especially in the winter. You can lower your heating expenses and create a comfortable atmosphere by taking a few easy steps. Recall that adequate insulation and safety are essential.

Examine the floor’s structural integrity first. Make sure it can sustain the additional weight of the materials and the heating system. If necessary, strengthen weak areas to avoid problems in the future.

Next, give the surface a thorough cleaning to get rid of any dust or debris. Proper adhesion of piping and insulation materials is ensured by a clean surface. To reduce heat loss and increase energy efficiency, add insulation.

Pay close attention to the layout and make thoughtful plans before installing the warm water floor piping. Proper pipe spacing guarantees uniform heat distribution over the whole surface. During installation, make sure the pipes are firmly secured to avoid movement or damage.

After the pipework is installed, link it to a dependable heat source, like a water heater or boiler. Before continuing, thoroughly test the system to find and fix any leaks or malfunctions.

Lastly, to create a surface that is both long-lasting and aesthetically pleasing, cover the piping with a protective layer made of tile or concrete. Maintaining your warm water floor with regular care and observation will help to guarantee its longevity and effectiveness.

You can turn your loggia or balcony into cozy retreats all year long by taking the time to install a warm water floor. You can benefit from radiant heating and increase the value of your house at the same time with careful planning, attention to detail, and appropriate insulation.

Making your balcony or loggia comfortable can make a big difference, especially in the winter. Warm water floor installation is a great way to make these spaces cozier and warmer. You don’t need expert assistance if you follow a few easy steps to do it yourself. This tutorial will lead you through the process in simple terms, from surface preparation to pipe laying and heating system connection. You’ll soon be able to walk around in your newly designed area with the comfort of a warm floor thanks to the correct equipment and supplies.

Video on the topic

The screed is not needed?! Inexpensive and warm floor on the loggia are building for ourselves

How to make a warm floor. BALCONY

How can you not make a warm floor on the loggia? Master class #016