How to install rehau pipes with your own hands

Comfort and energy efficiency can only be maintained by making sure your home is adequately heated and insulated, especially in the winter. The installation of high-quality plumbing systems that efficiently distribute heat throughout your home is a crucial component of this. This article will concentrate on installing Rehau pipes, a well-liked option renowned for its dependability and durability. You can save time and money by doing this project yourself if you have the necessary equipment and know-how.

It’s critical to comprehend why many homeowners choose Rehau pipes before beginning the installation process. Premium materials with exceptional durability and corrosion resistance, like cross-linked polyethylene (PEX), are used to make these pipes. Rehau pipes are renowned for their flexibility as well, which makes it simpler to install them in a variety of configurations, including close to obstructions and confined areas.

To guarantee a seamless installation, preparation is essential. To begin, assemble all required equipment and supplies, such as Rehau pipes, fittings, a pipe cutter, a crimping tool, and the proper fasteners. Additionally, it’s critical to carefully plan the arrangement of your piping system, accounting for elements like the size of the areas that need to be heated and the location of your heating source.

Now that everything is set up, you can start the installation process. To ensure a proper fit, start by measuring and cutting the Rehau pipes to the appropriate lengths. Make sure your cuts are clean and straight. After that, make sure the pipes are fully seated in the fittings to stop any leaks. After the pipes are installed, tighten the fittings to create a tight seal by using a crimping tool.

Step	Description
Gather Tools	Collect necessary tools like pipe cutter, rehau pipe, fittings, and wrenches.
Plan Route	Determine the path for the pipes, considering shortest distance and avoiding obstacles.
Prepare Pipes	Measure and cut rehau pipes to required lengths using a pipe cutter.
Attach Fittings	Install fittings like elbows and tees to connect pipes as per the planned route.
Secure Pipes	Fasten pipes securely to walls or floor using clips or straps.
Pressure Test	Perform a pressure test to ensure there are no leaks in the system.
Insulate Pipes	Wrap pipes with insulation to improve energy efficiency and prevent heat loss.
Connect to System	Connect rehau pipes to the heating system, ensuring proper sealing and alignment.

The main advantages of pipes under the brand Rehau

Stitched polyethylene pipes have been used more often by engineers to construct communications systems in both residential and commercial buildings in recent years. Ultimately, this synthetic material possesses exceptional strength, a lengthy lifespan, and heightened resilience against temperature fluctuations, all while maintaining its flexibility.

Installation of Rehau pipes is done with special technology. Supervision sleeves and fittings, which are composed of brass or plastic, are used during installation. The creation of communications is a creative, but not a complicated process. There isn’t any welding or soldering done during installation. There’s no need to use sealants or glue to cut threaded joints. In this instance, the completed pipeline has several benefits for operations, such as:

• tightness and increased reliability – such indicators are achieved due to the reverse shrinkage of pipes and pressing with sleeves;
• improved sound insulation – the artificial material from which pipes are produced, absorbs the sounds of moving water well;
• durability – communications will last the owner for many years, and thanks to a special internal coating of products inside the pipeline, a raid is not formed;
• environmental friendliness – pipes are made from safe artificial raw materials;
• high temperature resistance – stitched polyethylene withstands water exposure, the temperature of which reaches +95 ° C, therefore, durable heating and hot water supply systems are created from the pipes, and they are also used to create a warm floor.

The primary drawbacks of stitched polyethylene products are their high price and poor solar resistance.

Okay, so here’s a brief synopsis of the article on installing Rehau pipes: "With our step-by-step guide on installing Rehau pipes yourself, we’ll make sure your home has efficient insulation and heating." All the information you require will be covered in simple-to-understand instructions, from assembling the required equipment to setting up the piping system and creating connections. This post will give you the confidence to install Rehau pipes and improve the insulation and heating in your house, whether you’re a do-it-yourselfer or just trying to save money on installation.

Characteristics

Consider the television series Raupink.

Heating pipe in Rautitan Pink (Raupink)

The best suited indicators are:

• Pressure (working) at the level of ten atmospheres.
• Short -term temperature at one hundred ten degrees Celsius.
• Temperature (working) – ninety -five degrees.

The bare minimum of respectable indicators

• The life is fifty years.

The following traits apply to Rautitan, another well-liked heating series:

The best suited indicators are:

• Pressure (working) at the level of ten atmospheres.
• Short -term temperature at a hundred degrees Celsius.
• Diameter (external)-1.6-4 cm.

Benefits of these products:

• Pipes can be posed pre -isolated.
• The temperature lengthening is slight.
• Can be directly connected to the heating device.
• The shape of the bend is preserved.
• If even the aluminum shell is damaged, the properties of the strength are preserved.
• The inner layer of the reh is durable. Rautitan Pink (Raupink) heating pipe (Raupink)

These pipes have a maximum operating pressure of ten bar and a maximum temperature of 95 degrees.

Additionally, the products’ limited ability to tolerate 100 degrees Celsius is limited to emergency scenarios.

Installation process

The most crucial step in getting ready for the Rehau pipes’ heating installation is figuring out how long each pipe is and how many connectors and fasteners it needs. It is advised to implement the plan down to the last detail in order to avoid missing any important details and wasting money on separate component deliveries. Simultaneously, it is preferable to take the pipe with a 5–10% margin. The pipe layout in the key locations is where the process starts. It is preferable to stop it with a narrow margin. Laying nearby fittings will also make it more convenient. This is what ought to be done next:

• The assessment ring is pulled to the end of the pipe;
• A nozzle is mounted on the expander, which corresponds to the diameter of the pipe;
• The end of the “Rehau” pipe is circumcised perpendicular to be a straight line;
• Inside is inserted and completely compressed;
• The pressure is slightly weakened, the expander is turning and the handles are reduced again so that the hole turns out round;
• The pipe is put on the tip of the Rehau fitting until it stops;
• The assessment ring is brought to the fitting;
• The press rests on fitting one part, the second clings to the ring;
• With several movements of the handles, the ring is pulled onto the head of the fitting, along with it the pipe is slightly pulled.

As a result, every connection is handled. Without outside assistance, installing the "Rehau" pipe is a simple task that can be completed by hand. You can watch the video below to get a clear idea of how all of this is happening.

Recall! Take care to ensure that the "Rehau" pipe’s angle with respect to the fitting does not change during the crimping process. If this subtlety is not monitored, there will be a gap and eventual system failure when pressure is applied. Numerous issues will arise from this, particularly if the screed is already filled.

Advantages

The following qualities set the Rehau pipes apart and explain why they are so wide:

• Resistance to corrosion formations;
• Sustainable pressure of the working fluid in the structure;
• Resistance to high temperatures;
• Reduced thermal conductivity;
• Resistance to internal pressure in water and heating structures;
• The optimal level of shock viscosity, which remains at low temperatures;
• Protection of the internal walls from the formation of plaque;
• Resistance to wear and abrasion;
• Safety, which is especially important when used in tap structures;
• Excellent sound insulation;
• Plasticity that causes the simplicity of installation;
• High life (up to half a century).

Taking the collector by surprise

Wiring

The structure of Rehau pipes inhibits deformation during collapse. After completing the task, the design reverts to its initial state. This feature serves as the foundation for standing such pipes. More specifically, you cannot use cutting, welding, or adhesive composition when installing them. There are the following configurations of Rehau pipes available:

• Diameter: 16-63 mm;
• Wall thickness: 2.2 – 8.7 mm.

Rehau wiring is done using a set of instruments that the manufacturer has made available. These instruments are easily obtainable and don’t need any extra attention. Simultaneously, it is preferable to assign the task to an expert who has extensive knowledge of Rehau wiring. This case calls for dexterity and an understanding of certain nuances.

Domestic wiring

The technology of cold pressing a movable sleeve is used in Rehau wiring. The clutch that results is therefore reliable and tight. Under the screed, the connection can be concealed. The following benefits define Rehau technology connections:

• You can not use welding;
• Fire safety;
• The connection process can be controlled every minute, which allows you to quickly correct the possible skew;
• In the connection zone, the diameter of the structure is practically not narrowed, which increases the reliability of the system;

• The design is ready for operation immediately after the completion of installation work;
• No additional tools and materials are required;
• The cost of the design plus a significant saving of time in the performance of work gives reason to say that the products of the German brand will not hit your wallet;
• Fitings made by the company determine the ease of installation in the most inaccessible zones.

Rehau pipes are very easy to play. Having all the required equipment and fixtures from this brand is crucial. Pipe installation needs to be done before you can start any finishing work. For what purpose is it used? Thus, you can cover up the pipes with elegant or decorative materials.

We chose to install the Rehau pipe wiring ourselves, right? As previously stated, some knowledge is necessary for this work. We suggest watching a video that showcases the work of experts. Finding out some professional insider information will enable you to approach the situation with greater assurance.

Are they really better

To ascertain whether the installation of Rehau pipes can, in fact, totally replace the widely used metal and polypropylene. Commence with the manufacturing material. For Rehau pipes, sewing polyethylene is utilized. The creation of a three-dimensional grid at the molecular level serves as the link between each link. In the end, the bay is uniform all the way around. One can think of the following benefits of such a solution:

• non -toxicity. Polyethylene itself in the product does not emit harmful impurities into water;
• lack of noise when passing water;
• universality of material for various systems;
• a unique and simple system for installing “Rehau” pipes;
• resistance to deformation and the occurrence of ruptures;
• high plasticity;
• minimum heat loss;
• resistance to pressure and temperature changes;
• A special design and coating of the internal walls, which prevents the appearance of a plaque.

It is evident from the above that "Rehau" pipe installation is feasible in both new and old construction. Products handle hot and cold fluid transmission flawlessly. This indicates that not only is it simple to heat using Rehau pipes, but also to supply water. You can arrange them in any way while doing so. Rehau pipes are simple to install behind doors and other obstructions.

The company has developed several types of products, which allows you to quickly make a choice and determine the best price and quality ratio for a particular object. The HIS line is suitable for the supply of any non -aggressive liquids with a temperature of up to 70º. Used for heating systems with rigid carrier control. The subspecies "Rehau Flex" is also suitable for laying heating and water supply, the maximum possible diameter of pipes 63 mm. Rehau Stabil is able to keep the form better, therefore it is used in installing water -related points. The peculiarity of this pipe "Rehau" is explained by a small layer of aluminum. The pink series "Rehau Pink" is used exclusively for warm floors or general wiring of the heating system. They are very plastic and require fixation using fasteners. Feel perfectly under the screed and plaster. Withstand the temperature up to 90º and the pressure up to 10 atmospheres.

Before installation

In order to cater to the needs of Rehau pipe users, the company also created a unique tool for pipe and fitting installation.

As a result, it’s critical that you become familiar with the selection made to boost productivity and use the suggested nodes, which will only lengthen the service life. From the necessary tool:

• extensor or expander;
• press "Rehau";
• specialized scissors;
• roulette;
• marker for marking.

Rehau expanders are tools that resemble riveters. Its sharp cone-shaped tip is the only part that is inserted straight into the pipe. His name is a fitting match for his role. In order to make the pipes easier to work with fittings, it expands the diameter of the ends or collapses them. The kit may include a set of nozzles for Rehau pipes in different diameters.

The press "Rehau" resembles pliers that have been enlarged and altered. It enables you to reach the pipe to the necessary fixation mark and press the consumable material. includes nozzles in different diameters as well. The installation of the pipeline in an apartment or private home can be made even easier and faster with the use of a device like this one that has an engine and runs on a battery.

Standard scissors that work with polypropylene, metal, and plastic can be used. This will not degrade the quality. However, it’s advised to get specialized equipment if you’re planning to install heating or other systems carefully and professionally. These items have excellent functionality and let you process insulation quickly.

Crucial! Only use the instrument that the manufacturer recommends. If not, there could be a loose joint or damage to the pipes, which would require a round amount to fix.

Heating rehau

1. Rehau pipes are not subject to corrosion, and due to this they function much longer than ordinary metal equipment.
2. Such components are resistant to temperature and chemical effects.
3. Rehau products withstand long -term stretching loads, due to which, you can use pipes without fears for many years.
4. Pipes from the manufacturer have maximum shock strength.

1. The installation of such pipes saves a lot of time (experts believe that Rehau heating installation occurs 40% faster than welding installation).
2. Such pipes have considerable flexibility, which is why a person can easily circumvent already installed water supply systems, as well as complex angles.
3. Such flexible pipes can be installed by a single segment (up to 100 meters), and therefore, the possibilities of improper installation and the risk of damage to the entire heating system are excluded.
4. Visually it is very easy to control the connection of such pipes, preventing the occurrence of subtexts.

The main stages of the creation of the pipeline

Fittings and other products must be ready before communication is installed. It is necessary for you to cut pipes of a specific length using a well-planned drawing. Experience has shown that it is preferable to have every component of future communication ready right away. Prior to beginning any work, each pipe’s length is measured once more.

The process of establishing a connection technically is straightforward:

• The nozzle joins the expander – its diameter should coincide with the similar parameter of the pipe. It is important to make sure that the nozzle sat well on the tool and holds reliably. At the same time, the expander"s handles need to be diluted: they must be at an angle of 90 degrees relative to each other.
• A sleeve is put on the pipe to the place where a reliable connection will appear in a few minutes. During operation, use fittings that are made either from plastic or from brass. The connecting parts from brass are durable, and similar products from plastic are released by low cost and decent strength.
• The pipe is put on the nozzle until the pipe. Now it is necessary to carefully reduce the handles of the expander and expand the product released from stitched polyethylene. The pipe will expand quickly and without heating, without the use of glue, welding and soldering. This method of installation is simplicity.
• Fitting is fed into the expanded end of the product. In this case, it is necessary to push the sleeve to the place of the future connection.
• With the help of the press, the sleeve is approaching the fitting to the stop. The creation of a reliable and strong connection is over.

It’s crucial to keep in mind that distortions of any kind are not acceptable while working. Pushing the sleeve into the fitting requires caution but also confidence.

Experts advise taking basic safety precautions when working. It is advised to install with safety goggles and gloves on.

As you can see, special education is not necessary to establish a dependable pipeline. Products made of sewn polyethylene are readily connected without the need for sealants or welding.

Stitched polyethylene and its advantages

The company uses premium polyethylene for production, sewing a linear connection with peroxide inside the material’s structure.

High-quality polyethylene with a linear connection sewn with peroxide inside its structure is used in production by the company. Because of the re-ha marking on this material, the products are very strong and heat resistant. Because the bonds between the molecules in polyethylene remain intact, the material can heal damage. The method for making polyethylene products is demonstrated in the video.

Crucial! The use of premium, eco-friendly raw materials by the company is the cause of the high cost of the products. The primary benefits of the content are:

The primary benefits of the content are:

• All products are certified and tested;
• It has high resistance to corrosion processes, the walls of the pipe do not crack, do not break and do not pour;
• The material does not allow dirt inside the pipes, which excludes the formation of growths;
• The pipeline works without noise;
• It has greater resistance to high temperatures inside the system, the structure can withstand 100 degrees, and with a slight heating of water and 200 degrees;
• retains its shape at low temperature conditions, resistant to impacts;
• high resistance to chemicals;
• environmentally friendly material that is not able to harm human life and health;
• The life is more than 50 years;
• installation does not cause any problems, it can be done with your own hands.

Preparation for installation work

The first components that should receive more focus should be collector outputs. Only their proper processing will ensure complete tightness in the system.

The workspace, including the equipment, should be thoroughly cleared of dust and debris before installation. The system’s total tightness can only be guaranteed by processing them correctly. Depending on the installation method you have selected, purchasing the appropriate fitting is the only requirement.

View Bir Peaks Systems’ Video

Every single detail used in the installation must be complete and spotless. Before purchasing, a visual inspection must be done. This will guarantee the final product. Extra consideration should be given to their mode of transportation.

Crucial! This requirement is particularly important for materials made of stitched polyethylene during the winter. Ultimately, hypothermia cannot occur in stitched polyethylene products, and low temperatures cause them to become deformed and lose their properties.

High -tech products characteristic and methods of its installation

Because every manufactured good is certified and tested, Rehau pipes are incredibly dependable and long-lasting.

Rehau pipes are incredibly dependable and long-lasting because every manufactured good is certified and tested. Modern, environmentally friendly materials are used as raw materials in production, including:

• Polyethylene sewn;
• bronze;
• brass;
• stainless steel;
• ethylenevinylogol;
• Polivinyl sulfone PPSU and – -depthly PVDF;

Pipe installation is done using the technology that the company specifically developed. The procedure consists of:

• Press Phating, which is metal or plastic;
• Village sleeves.

The video contains more information.

This installation method’s primary benefit is:

• When connecting, the structure can be calmly hidden for plaster or gypsum, you will never need access to it;
• Installation of the entire system does not require special knowledge and skills, all the work takes place using a special tool, which in a matter of minutes everything perfectly collects; Professional tool is also developed by the company;
• No need to waste time cutting the thread or remove the upper layer of the material;
• There is no need for welding, soldering or gluing.

Necessary tool for work

The following products and tools are unquestionably required to create a pipeline:

• A certain number of pipes, adapters and fittings (connecting parts of communication) – before buying it is necessary to draw up a communication scheme and calculate the right amount of material. As a rule, it is drawn by hand on paper. The diagram indicates the size of the room, dimensions of devices and plumbing, features of communication (its length and width, bends). Before buying products, it is better to show the scheme to a professional or a specialist in a construction store.

• Expansion tool (it is also called an expander) – it is used to expand pipes made of artificial materials.
• A set of nozzles for pipes of various diameters, which should be supplied with an expanser.
• Axial manual press with a variety of nozzles – it is used to create durable compounds and for impending the sleeve, which will hold the pipe on the coupling.

• A pipeline designed for plastic pipes – a high -quality tool grips the product greatly and provides a neat cut. During work, chips are also not formed.

• Roulette – it is used to measure length.

• Marker that will be needed for pipe marking.

It’s also essential to order convenient gloves and specialty glasses that will shield the eyes from potential harm in a construction store.

Numerous factors determine how much the tools required for installation will cost. You can use ready-made sets under the Rehau brand for product installation. They range in price from 8,000 to 25,000 rubles. When money is tight, instruments made in China or the United States are typically ordered; these instruments typically cost no more than 10,000 rubles.

Installation

There are a few subtleties, but the installation is similar to installing any other pipes:

• There is a special tool for installation. Such a tool is needed to simplify the process. Rehau specification for installation
• The installation of products is carried out thanks to threaded or welded joints, as well as shaped products and fittings.
• There is a company"s development – a connection with a mobile sleeve. It can be covered with plaster.

If you choose the Rehau company’s heating pipes, installation will be less complicated and the pipeline will function dependably and long into the future. You can also watch the video if you still have questions about the subtleties of the installation. By doing this, errors will be prevented.

Features of installation

Even the smallest distortions are prohibited when producing pipes. To ensure a high-quality connection, all components must be arranged along a single axis to form a distinct, straight line.

It is important to follow all safety regulations when installing Rehau pipes in heating systems, as well as for the supply of gas and water. The most crucial thing is to keep your hands and eyes safe. You can use the protective mask in the first scenario, and you should avoid touching any tool’s moving parts in the second.

Furthermore, it is obvious that you can learn more about the installation of Rehau pipes by watching the accompanying video, which highlights the key details and subtleties of the task.

To sum up, it’s important to remember that installing pipes from the German manufacturer Rehau is fairly easy, so everyone can handle the whole to-do list. The most important thing is to obtain the complete list of required tools and to strictly follow the previously mentioned advice.

Installation of pipes

In order to manually install Rehau pipes, you must have the following:

• purchase the necessary tool;
• first familiarize yourself with the instructions of the assembly of the pipeline.

Instrument

Prior to starting the pipe installation, you need to:

1. purchase the right number of pipes, connecting fittings and adapters. To calculate the necessary materials, a water supply circuit is drawn up;

An approximate layout of a city apartment’s hot and cold water pipe wiring

1. Prepare a tool for installing rehau pipes:
2. Expand with a set of nozzles for pipes of different diameters. Otherwise, this tool is called an expander;

Installing pipes

• press with additional nozzles of different diameters. Since the installation of the type of pipes under consideration is somewhat different from the usual welding, such a specific tool for the installation of Rehau pipes is required for the procedure;

Pipes are connected using a hand press (Rehau Rautool).

• pipe cutting tool. The pipeline is standard, used for all types of plastic pipes;

Cutting tool for polymer pipes

• roulette, marker for pipe marking.

Common construction measurement instrument

You can buy each tool individually or as a set. A set costs 2,500 rubles on average.

The assembly process of the pipeline

Installing a pipe made of sewn polyethylene First, the pipes are prepared for Rehau. There are two steps in the preparation process:

1. According to the previously prepared drawing, pipes of various sizes are cut;

Cutting the pipe to the appropriate length

1. The fittings necessary for the assembly of a certain section of the pipeline are prepared.

In the event that reheat heating is installed, it is better to get all system components ready right away and then verify that each segment is installed in accordance with the plan.

Every pipe and fitting has a specific location on the floor, which you can verify. This is particularly true for city apartments where the heating is off throughout the building.

An old Russian saying goes, "Measure seven times, cut once." This should serve as your guide when cutting pipes. Pipe cutting mistakes may result in the pipeline system in the room not being able to be installed.

Sleeves are used to dock pipes and fittings, and they are fixed in the following ways:

1. A nozzle is selected for the expander, the diameter of which is fully consistent with the diameter of the pipe used. In this case, the tool handle should be completely divorced (the ends of the handle are located at right angles to each other);
2. The nozzle on the expander should hold firmly and sit on the pin until it stops;
3. on the segment of the pipe that is required to be connected to the fitting, the sleeve is put on. The diameter of the sleeve used should also correspond to the diameter of the pipe;

It has chamfers on each sleeve. It should be installed with the future connecting seam in mind.

1. At the other end of the nozzle installed on the expander, the pipe is put on. When the exander handle is reduced, the pipe expands;

Expansion of the pipe in preparation for additional installation

1. The expanded end of the pipe is connected to the fitting, which must be installed in this place;

Configurations for the fitting into the pipe’s prepared end

1. A previously installed sleeve is brought to the fitting;
2. Using the press-zoom, the sleeve is advanced to the fitting. Strong and reliable connection is ready.

Adjusting Adjusting press using a clip

It is important to avoid even the smallest distortions when connecting pipes and fittings. Each connecting component must be positioned exactly horizontally in relation to the others. If not, the connection will prove to be untrustworthy.

Detailed work plan using a press-zhim

Rehau pipes for gas, water, or heating supply should be installed in accordance with all safety regulations. First and foremost, care must be taken to protect the hands—which should not be placed in moving objects—and eyes—by donning a mask.

In order to more precisely ascertain all the crucial details, you can watch the rehau pipe installation process from the side in the ensuing video.

Install the Rehau pipes from the German manufacturer for universal power. Having the required tool and carefully adhering to the above instructions are crucial.

← How to use a chimney correctly

What are the main advantages and features

1. The presence of a reverse shrinkage. Products are able to resist high pressure indicators, and after its prolonged exposure, they return to the original form. Other materials with similar parameters simply stretch after some time and become unusable finally.
2. Increased thermal resistance. Such pipes work normally at temperatures up to 120 degrees.

One characteristic that sets stitched polyethylene pipes apart is their three-dimensional structure. This indicates that tiny threads appear to be used to stitch together chains of polymers at the molecular level. which aids in the development of unique properties that set it apart from other materials in the same class.

.

• Accessibility of prices.
• The ability to resist freezing.
• Transfer high temperatures and pressure.
• Convenient installation.
• Light weight.
• A high noise insulation indicator near Beer Pex, Rehau and other companies. Thanks to which the room itself is protected from extraneous sounds. Pressure bursts are completely absorbed by the system itself.
• Long life along with high strength. About decay and corrosion when working with this material can be forgotten.
• Environmental friendliness. Polyethylene does not emit harmful substances, even when it is heated hard.
• Elasticity.

What is the remarkable pipes Rehau

Current pipe manufacturing technology endows completed goods with unique qualities:

• Improved sound insulation. Thanks to the stitched polyethylene, it is better to absorb the sounds created by the water movement in the system.
• The connection of the rehau pipes is as strong as possible due to the special way to install them.
• The material has universal properties, due to which from such pipes it is possible to build systems for supplying cold and hot water, heating contours. Plastic is capable of serving at a water temperature up to 95 ℃.
• Cracks do not appear on the pipes over time, they do not change their shape due to mechanical exposure, which makes it possible to lay them under plaster and other structures.
• High thermal insulation qualities – saving of natural fossils is possible.
• The operation of pipes is possible in conditions of water changes, as well as pressure in the system.
• Absolute security for the human body. This is confirmed by the relevant certificates.

• A special very smooth coating of the internal walls of the pipes does not allow to gather on them a raid that could thereby reduce their throughput.

Pipelines of varying complexity can be created using Rehau pipes and fittings of all kinds. One can attribute these products’ drawback to their expensive cost.

Assembly of the pipeline

Before installing the rehau pipes without the need for a specialist, the products should be prepared, and the blanks of the appropriate sizes should be cut. Prepared fittings that are helpful in assembling various pipeline sections are available. If Rehau pipes are being used for the installation, you will need to prepare every system segment and ensure that the segments were cut in accordance with the plan. Decompose on the floor in the desired order in order to inspect pipes and fittings. This is particularly true for city apartment heating arrangements, where you have to turn off the system all the way through the house.

When cutting pipes, it is necessary to be guided by the famous Russian proverb. Installation of rehau pipes with improvised means is possible, but it should only be conducted when using correctly prepared segments. If you are mistaken at the same time, then installing the pipeline system may be impossible without the acquisition of additional pipes. The docking of fittings and products with each other is carried out by sleeves, which are installed using a certain technology. A nozzle with a diameter must be selected for the expander, which corresponds to the parameter of the pipe used. The instrument handle should be divorced, and its ends are located at right angles to each other. The nozzle on the expander should be fixed firmly and stayed on the pin, when installing it is necessary to feel the emphasis. On the segment, which is supposed to be connected to the fitting, should be put on a sleeve. Its diameter should correspond to the diameter of the pipe.

Installation process

Technology installation involves a number of steps.

• We wind up the nozzle with the necessary diameter on the expander.
• After that, we put pipe rings on the pipes themselves with our own hands. And we do it so that the place of expansion of the pipe is not taken.
• You need to insert the expander into the pipe. It expands when the installer presses on a special handle. The next step is to turn the pipe itself, or an expander of 30 degrees. And then press the handle again. You can repeat the operation to fix the result. After that they move on to the use of fitting.
• The shutter is assigned from the press with your own hands. Next, pull the pins used for fastening. The next step is the extension of the nozzles fixed with pins. The shutter settles.
• The connection acquires a finished look. The product must be pulled out of the press.

Rehau pipe installation is a do-it-yourself project that can significantly increase comfort and energy efficiency in your home’s insulation and heating systems. Homeowners can take charge of their heating system and possibly save money on installation costs by following the instructions provided in this guide. Even individuals with limited experience can successfully complete the installation with the right planning and attention to detail.

The adaptability and simplicity of handling of Rehau pipes is one of their main benefits. Rehau pipes are suitable for a variety of layouts and configurations because they are easily bent and maneuvered around obstacles, unlike rigid pipes. This adaptability minimizes the chance of leaks and enhances system performance by making installation easier and requiring fewer extra fittings and connections.

In order to minimize heat loss and maximize the efficiency of your heating system, proper insulation is essential. Rehau pipes are engineered to function in concert with superior insulation materials to produce a tightly sealed system that enhances heat retention. Homeowners may prevent heat loss and cut down on energy use by making sure all of their pipes are adequately insulated. This will result in lower utility costs and a smaller carbon footprint.

Additionally, doing the installation of Rehau pipes yourself gives you more control over the caliber of the materials and labor employed. Homeowners can make sure that all connections are safe, pipes are supported appropriately, and insulation is installed correctly by personally supervising the installation process. In addition to fostering pride in the final product, this hands-on approach gives peace of mind because the heating system is installed to the highest standards.

To sum up, installing Rehau pipes for insulation and heating is a useful and enjoyable DIY project that can pay off in the long run. Homeowners can confidently take on this do-it-yourself project and benefit from increased energy efficiency, comfort, and savings for years to come with the correct tools, supplies, and advice.

Video on the topic

Ideal plumbing in the apartment with your own hands

Performing work on the device of the stroob and the hidden installation of the water supply, sewage, electricians.

Heating on pipes made of stitched polyethylene Rehau and useful tips.