How to install a gas boiler Navien step by step

Reducing energy costs and preserving comfort in your home require proper insulation and heating. A dependable boiler is one of the most important parts of a heating system that works well. A reputable brand in the field, Navien provides a selection of gas boilers that are renowned for their dependability and efficiency. If you’re thinking about installing a Navien gas boiler in your house, it’s critical to comprehend every step of the procedure.

Careful planning and observance of safety regulations are necessary when installing a gas boiler. It’s crucial to evaluate your heating requirements and choose the right boiler model and size for your house before you start. Navien provides a range of options to meet various household needs, so choosing wisely can be aided by speaking with an experienced expert.

Make sure that all required permissions and approvals have been obtained in accordance with local regulations before beginning installation. It’s also critical to set up the installation area and make any required modifications to make room for the new boiler. This could entail making structural changes, clearing space, or improving already-existing infrastructure.

The installation procedure can start as soon as the site is ready. This usually entails installing the boiler where it is supposed to be, attaching it to the gas supply, and integrating it with the heating system. Care must be taken at every stage to guarantee correct operation and security.

Thorough testing and inspection are necessary to confirm that the boiler is operating correctly and fulfilling performance standards after the physical installation is finished. This could entail testing the heating output, calibrating the controls, and looking for gas leaks. The boiler should not be used on a regular basis until every detail has been thoroughly examined and verified.

How to install a wall boiler step by step

Gas boiler installation is done in compliance with the gasification project, the technical specifications provided by the local gas service branch, and the approval of regulatory bodies such as the architecture, SES, fire inspectorate, and others. It also follows the guidelines set forth in the directive materials to ensure the safe operation of gas equipment.

Procedure for installing a wall trim step-by-step:

1. The choice of installation site and the preparation of the wall for placing the Navien boiler is performed according to the project. Since the mass of the structure is 25-35 kg, the wall on which the device will be mounted should be capital or additionally strengthened to withstand the load.
2. Install an anchor bolt for reliable fasteners of the structure.
3. The thermal insulation and a buffer panel, for example, rubber are installed on the wall, to prevent vibration of the boiler Navien Deluxe and the noise background.
4. The Navien unit is installed strictly in a horizontal position, in compliance with a distance of at least 60 cm from all sides for repair and maintenance.
5. Make a connection to an electric line with a voltage of 230 V. The socket for connecting the device should be individual and located at a distance of not more than 300 mm from the body. Boiler equipment must be grounded.
6. Connect the unit to the gas pipeline directly. Any other gas equipment should not be connected to this site. The installation site must be stiffly fixed to prevent independent dismantling of parts.
7. Contact the water supply with a diameter of 15 mm or 1/2 ". At the point of entry of cold water, a shut-off tap is installed into the unit. Water pressure should be in the range from 1 kgf/cm2 to 6 kgf/cm2. Otherwise, it will be necessary to apply methods of increasing/decreasing pressure in the water supply.
8. Carry out a strapping unit with heating systems. When connecting pipes to the battery at the upper part, a manual or automatic air vent is installed to remove air from the network.
9. All areas of compounds are fixed using mounting couplings or mounting nuts.
10. Carry out thermal insulation of pipes and collectors.
11. Install a thermostat on the wall in a heated room, with a distance from the floor 1.5 m.

We connect the chimney

The installation of a Navien boiler with a natural chimney system takes place in a space that has dependable supply ventilation and three different air circulation options.

The chimney section ought to line up with the Navien gas boiler’s smoke pipe. The boiler’s technical documentation must adhere to the manufacturer’s specified scheme for chimneys and their geometric dimensions.

The primary prerequisites for installing chimney system components are:

1. Throughout the length of the chimney, its diameter should be without excesses equal or more than the smoke pipe of the unit.
2. The chimney is arranged vertically. If horizontal areas are present according to the scheme, then their length should be no more than 2 m. An audit is installed on this site to clean the smoke system.
3. The section of the chimney is performed round, because in rectangular and square structures there are stagnant areas in which soot accumulates, traction is reduced.
4. The metal of the chimney is stainless steel.
5. A deflector is installed on the chimney.
6. In the lower part in the tee or support zone, a plug with a condensate carrier is installed.

Installation of the floor boiler Navien

Because the floor gas boiler is a potentially dangerous item, it can only be installed in a specific room—the project’s furnace—per the most recent SNiP regulations. Since the user does not have permission from the gas service to operate the unit, it is impossible to ignore these requirements.

There has to be a dependable ventilation system in the furnace. Up to 150 kW Navien gas boilers can be installed on any floor, while larger units should only be placed in the basement or on the ground floor.

Installing them in bathrooms and residential buildings is prohibited. Cavities or niches should not exist in the furnace to prevent the buildup of combustion products and the creation of explosive mixtures.

Underneath the gas unit is a sturdy cement base. The building’s structural components near the unit need to be shielded from the possibility of fire.

Thermal insulation is typically applied with a roofing sheet placed over a refractory gasket, such as an asbestos sheet thicker than 3 mm.

Around the whole perimeter, the protective structure should extend at least 100 mm beyond the boiler’s dimensions. There should be a minimum of 100 mm between the unit’s wall and the heat-insulated walls.

The device provides at least 1.0 m of clear space in front for servicing. An iron sheet measuring one square meter is placed over the area in front of the Navien boiler.

Auxiliary equipment and intra-house engineering networks, such as a circulation pump, fan, security group, drainage line, sub-file line, heating and hot water system, gas pipeline, and chimney system, are connected to the boiler after it has been installed.

The manufacturer’s factory’s technical materials and boiler room design documentation both list binding schemes. A specialized organization with the authorization to carry out these kinds of operations performs installation work. Gorgaz specialists do maintenance on gas equipment.

Connecting the chimney

In addition to ensuring the house’s hygienic and fire safety, the chimney helps the unit operate efficiently in accordance with efficiency standards.

The boiler equipment manufacturer installs the gas transmit dimensions in the furnace chamber in order to create the necessary discharge for air leaks at the combustion mouth. Prior to installation, the chimney’s exit location is established so that it can be integrated with a boiler chimney pipe.

The minimum chimney diameter for boiler units with an open top-bearing chamber and a maximum capacity of 35 kW is 140 mm; for more productive units, the diameter should be greater at 160 mm.

Closed Navien boilers have a coaxial type of type, which is specified by the manufacturer in technical documentation or is included in the device supply.

Installing the condensate airler and deflector, as well as isolating the boiler at the points where it passes through the building’s structures, are crucial when installing the boiler and its chimneous system.

After securing the chimney’s component parts into a cohesive whole, the boiler fireplace’s natural traction is examined by holding a lit match up to the smalle’s viewing window.

We’ll walk you through the process of installing a Navien gas boiler for your home heating needs in this step-by-step tutorial. We’ll go over every step in detail, from setting up the area to connecting the required pipes and wires, so that homeowners can understand and control the installation process. These guidelines will guarantee a safe and effective installation of your Navien gas boiler, whether you’re installing a new system or upgrading an old one. Our goal is to enable homeowners to take charge of their home heating systems and benefit from dependable, cost-effective heating all year round by emphasizing clarity and simplicity.

Launch of the boiler

Heating networks are crimped after the boiler is strapped down with a chimneous system and engineering networks, and the unit’s power supply and electronic systems are tested. An official from Gorgaz launches the gas equipment for the first time.

I start fueling the heating system with a sequential air discharge through the aeronics after making sure the gas line is functioning and has been checked. They start firing up the boiler using the remote control panel once the heating circuit has reached operating pressure.

The control panel has all of the modes adjusted. The "+" and "-" buttons on the system are used to adjust the temperature regime. Using the selected interpretation of "heating," denoted by the picture of a battery. The value of the introduced temperature is shown on the LCD display.

The heating system’s mode of operation can be adjusted by the management program to match the interior air temperature. The user has to click on the image of the house with the thermometer inside in order to accomplish this.

The temperature indicator will flash while it is being set, and once it is set, the display will remain constant.

Operating advice

The boiler’s and the gas line’s gas systems should never be operated by the user. These tasks are only executed by a Gorgaz specialist. Should any gas leaks be found, or if equipment installed on the gas line malfunctions, the user needs to shut off the boiler’s main gas valve right away, check the room thoroughly, and contact emergency services.

When operating properly, Navien gas boilers are incredibly dependable pieces of equipment, and breakdowns happen very infrequently. Furthermore, the device software control unit is equipped with an effective diagnostic system that not only identifies the root cause of the malfunction but also promptly notifies the user.

The insulation and heating performance of your house can be greatly improved by installing a gas boiler, particularly a Navien model. A Navien boiler helps lower energy expenses while ensuring a warm and cozy living space thanks to its sophisticated features and efficiency. You can successfully install a Navien boiler in your home by following a step-by-step guide.

First things first: before starting the installation process, make sure you have all the tools and equipment you need. Depending on your particular setup, this includes pipe wrenches, adjustable wrenches, tubing cutters, pipe thread sealant, and a variety of other tools. Having everything ready will expedite the installation and avoid needless delays.

Next, go over and carefully read the Navien installation manual. To ensure correct installation and operation, the manual offers comprehensive instructions tailored to your boiler model. Observing the manufacturer’s instructions is crucial for both effectiveness and safety.

Make sure the gas supply to your home is off before installing the boiler. Prioritizing safety above all else during installation is imperative. Furthermore, if you have any questions concerning any part of the installation procedure, it is advised that you speak with a professional.

It’s crucial to conduct extensive testing after the boiler is installed correctly to make sure everything is operating as it should. This include testing the heating system to make sure it’s delivering enough warmth throughout your house, looking for leaks, and confirming correct gas flow.

To sum up, routine maintenance is essential to maintaining the efficiency and smooth operation of your Navien boiler. This covers cleaning, yearly inspections, and any required repairs. You can prolong the life of your boiler and keep dependable heating for many years to come by giving it the regular maintenance it needs.

Video on the topic

Installation and strapping of the Navien gas boiler with your own hands

Independent installation of a gas boiler and first start!

DIY installation and strapping Navien Deluxe 24k with your own hands.

Installation of the Navien Deluxe Coaxial 30 K gas boiler, with a strapping of all pipes and shut -off valves.

Navien boiler, briefing.

Navien ngb 210 – gas boiler