How to independently assemble a drain from sewer pipes: cheap and effective

Welcome to our tutorial on building a cost-efficient and efficient sewer pipe drainage system for your house. Maintaining the integrity of your property and avoiding water damage require effective drainage. Using easily obtained materials such as sewer pipes, you can build your own drain system and ensure efficient water management throughout your home at a lower cost.

A well-designed drainage system is crucial for handling rainwater and wastewater from your house. Constructing a drainage system out of sewage pipes is a workable and affordable fix. Sewer pipes are made to efficiently manage water flow, are widely available, and are long-lasting. You can construct a sturdy drainage system that meets the requirements of your property by repurposing these pipes.

It’s crucial to comprehend the fundamentals of drainage planning before getting started. Examine your property’s layout to determine which areas are vulnerable to flooding or water buildup. Seek out any natural low spots or slopes where water tends to pool. The design of your drainage system ought to be such that water is diverted from these susceptible locations.

Sewer pipes are versatile, which is one benefit of using them for your do-it-yourself drainage system. PVC and corrugated plastic are two of the materials and sizes of sewer pipes. Based on the amount of water you anticipate managing and the design of your landscape, select the pipes that will best meet your needs.

Appropriate grading and well-planned pipe placement are essential components of a working drain system. Beginning at the intended drainage path, dig trenches. The size of the pipe and the amount of water it must handle will determine the trench’s depth and width. To guarantee that water flows naturally toward the outlet point, slope the trench appropriately.

Installing the drain system is not too difficult. Couplers and elbows, among other suitable fittings, are used to join the sewer pipes. To stop the pipes from moving or misaligning, firmly anchor them in place. To make sure there is adequate flow and to find any possible leaks or problems, test the system by adding water into the trench.

These instructions will help you use sewer pipes to create an efficient and reasonably priced drain system. In addition to saving money, do-it-yourself drainage projects offer you the freedom to modify the system to meet the unique needs of your property. You can prevent water damage to your house and guarantee effective water management all year long with careful planning and execution.

With any luck, this guide will give you the confidence to tackle your drainage project. Effective water drainage can be achieved on a budget with the correct supplies and a little know-how. For additional advice on enhancing the sustainability and efficiency of the insulation and heating systems in your house, please feel free to browse through our other resources.

In this article, we will guide you through the process of building a DIY rainwater drainage system using readily available sewer pipes, which is both cost-effective and efficient. By following our step-by-step instructions, you will learn how to select the right materials and tools, plan the layout of your drainage system, and assemble it correctly. We"ll discuss essential considerations such as choosing the appropriate pipe size, calculating the necessary slope for effective drainage, and ensuring proper connections to redirect rainwater away from your home"s foundation. Whether you"re looking to save money or prefer a hands-on approach, this guide will empower you to create a functional and reliable rainwater drainage solution for your house without breaking the bank.

Is it possible to save on the drainage?

Many developers ask this question. A variety of ready-made drain models are available in the construction markets. These drains are a type of designer that you can readily assemble to create the system you want. These sets come at a pretty high price.

For a very long time, do-it-yourselfers have been able to gather drains on their own and suggest a system of plastic sewer pipes. These details are inexpensive, their arrangement makes it simple to select the components you need, and a wide variety of adapters of all shapes and sizes takes care of the joint and connection issues. Another benefit of this kind of solution is that processing plastic is simple. You can paint the completed drain the same color as the roof.

Where to begin?

Once the decision has been made to build the drainage system out of sewer pipes, the first thing you should do is buy the supplies. It’s best to figure out the effective roof area first. Rainwater volume is determined by its size, which the system must remove, and the gutter’s diameter as a result. Use the average values if you don’t want to tamper with the calculations. In this instance, the task will need:

  • pipes with a diameter of 5 cm, which will be used to drain water;
  • pipes with a diameter of 11 cm, from which a gutter will be made;
  • tees for performing elements compounds, diameter 11 cm at two inputs and 5 cm at the output.

Based on the measurements taken, the project will assist in determining how many independent materials are required. We start by taking the roof’s length and width measurements. All structural components are measured if the shape is complex. We must determine the roof’s perimeter. As a result, you can figure out the pipe’s meter that will be used to make gutters. The required length of the pipe will be equal to half the circumference of the roof because it must be cut in half and two parts will be obtained from one part.

Sewer pipe drainage systems are in no way less effective than their specialized store counterparts.

Counting the number of drainage risers is the next step. Draw a roof plan and "arrange" details on it to accomplish this. It is important to keep in mind that there shouldn’t be more than five meters separating the risers. After determining the necessary pipe length, we determine the number of drains. Measure the distance from the ground to the cornice overhang in order to accomplish this. It will be the drainage riser’s height. To find the length of the steered pipe, multiply it by the number of details.

We calculate how many tees are needed to connect the gutters and drainage risers based on the finished project. The latter might err on the side of deviation rather than being perfectly straight. Water can thus be conveniently directed to the collection container, for instance. Here, we also take into account the quantity of adapters that are required.

Remember that all joints need to be sealed with high-quality sealant. Using a composition meant for external work or universal is the best option. The effects of UV radiation do not destroy them.

The drainage funnel locations that are suggested in the diagram allow melt water to drain as efficiently as possible.

Technology installation of the drainage system

Once the material is ready, the structure can be installed.

Production of gutters

We begin by making gutters, which require cutting along an 11-centimeter-diameter pipe. With a grinder, this is the simplest task to complete. A protective casing that will be covered in molten plastic after the operation is complete is advised to be removed by certain craftsmen. It is preferable to avoid doing this as it compromises worker safety. You must use a disk with the largest diamond spray for cutting in order to solve the issue. ideal if there are segments. Then, tiny shavings rather than molten plastic will emerge from beneath the instrument.

The task will be easily completed by the electric jigsaw as well. It is advised to create a unique limiting wood shape or fix it as a reference for the specifics in both situations in order for the cut line to be flat. The simplest and most affordable way to cut is with a cutter made from a piece of leftover hacksaw cloth. Here, the pipe is fitted with a ruler that serves as a guide. The cutter can easily cut the detail on this line.

The sections of pipes that are included in the tee, which are 15-20 cm long, are not cut to ensure dependable gutter connections.

Preparation and installation of brackets

Brackets are gutter repair parts. The size of the gutters determines their shape and dimensions. There is no need for preparation if the decision is made to buy completed components. Another consideration is if making them by hand is the plan. Making the brackets by bending the sturdy sheet metal stripes is the simplest method. It is crucial that the fasteners match the gutter in terms of size and shape. Three methods are available for fixing pre-made brackets:

  • On the frontal board. Used in the case when the installation of the roof is already completely completed. Allows you to fix brackets without forced dismantling of already installed roof elements.
  • On rafter legs. If there is no frontal board in the design, the details are attached in this way. As in the previous case, you can install brackets without dismantling installed roofing elements.
  • To the crate of the roof. Experts believe that this is the most correct way to attach brackets. It is performed during the installation of the roof. In this case, special elongated clamps are used, which are securely fixed at two points, which allows you to securely fix the brackets.

There are three methods for attaching gutter brackets to the roof; these are shown in the diagram.

After deciding on the bracket fixing technique, we install the brackets. In this instance, the following guidelines need to be considered:

  • The overhang should be 25-65% relative to the closest to the edge of the construction of the drainage.
  • The far edge of the drainage system should be lower than the visual plane of the roof.
  • The gutter should have a slope towards the drain. Its value is about 1 cm for each linear meter.

The installation process is completed in the following order:

  1. We plan and fix the two extreme brackets. With this, we maintain the necessary slope.
  2. We pull the construction cord between the installed brackets. The resulting line will help mark the places of fasteners of the remaining parts.
  3. Install the remaining brackets, given that the maximum step of mounting brackets for plastic elements is 550-600 mm.
  4. We fasten the plastic adapters playing the role of the drain of the drainage.
  5. Installation of gutters

Gutter designs can be directly gathered in the brackets fastened beneath the roof. However, putting the system together on the ground and then lifting it to the roof is simpler. Either way, the procedure is performed in the same manner.

If it is anticipated that the gutters will be connected, you must skillfully merge them. Here, there are two possible outcomes. In the first, components are assembled using a glue that is appropriate for propylene pipes. The other involves docking with unique aluminum clips. In this instance, using a sealant that must smear the parts’ joints is essential.

It is necessary to install a plug in the very top portion of the drain after installing the gutter.

Transition pipes from non-sawn sections of pipes must be inserted into tees to serve as a drain funnel once the gutter structure has been assembled and placed on the brackets. The process of installing pipes is the same as that of installing sewage. After applying sealant, they are placed inside the tee. It is necessary to install a plug on top of the drainage system’s gutter.

Installation of drainage risers

Drainage riser assembly is performed in a manner akin to gutter assembly. In the event that an adapter needs to be installed, it is attached to the VSTK pipe and must be sealed. The following guidelines are followed while installing risers:

  • The pipe should stand from the wall at least 10 cm.
  • The riser is attached with special clamps, for long pipes they will need several.
  • The installation of the pipe is carried out in the direction from the bottom up.
  • Step of installation of fasteners is 1.8 m.
  • The upper pipe is connected to the tee playing the role of the funnel. When installing, a sealant is necessarily used.

A storm sewer pipe can be connected to the riser’s lower section. If it isn’t present, a unique knee is made, beneath which a rainwater collection container is later placed.

An excellent drain filter can be made from a plastic grid that has been folded into a roll. He will consistently keep big trash out of the gutter.

The sewer pipe drainage system is nearly complete. It’s still there to shield her from big trash. You can use a homemade filter to accomplish this. With an eye toward the gutter’s measurements, you must roll up a large-eating plastic mesh. Plastic clamps are used to secure the material so that it does not rotate. After that, insert a gut. The drainage system will be consistently shielded from large debris and falling leaves by such a filter.

Steps Materials
1. Measure and plan your drain layout. – PVC sewer pipes
– Pipe fittings
– PVC cement
– Hacksaw or pipe cutter
2. Gather the necessary materials. – PVC sewer pipes: Choose the diameter suitable for your needs.
– Pipe fittings: Elbows, T-joints, and couplings.
– PVC cement: To secure joints.
– Hacksaw or pipe cutter: For cutting pipes.
3. Cut the pipes to required lengths. – Measure and mark where you need to cut.
– Use a hacksaw or pipe cutter to make clean cuts.
4. Assemble the drain system. – Dry fit the pipes and fittings first.
– Apply PVC cement to joints and assemble.
5. Test the drain for leaks. – Run water through the system to check for leaks.
– Make adjustments if needed.

One simple and affordable way to manage rainwater around your house is to build a homemade drainage system using sewer pipes. Utilizing widely accessible materials such as PVC pipes and fittings, you can design a drainage system that is unique to your requirements. The fundamental procedures needed to put together such a system have been covered in this article.

The first thing you need to do is carefully plan your drainage layout. Think about the areas where extra rainwater gathers and the desired drainage point for it. Choose safe routes out of the way of sensitive areas or the foundation of your house. Planning out your design in advance will help you visualize the arrangement and guarantee effective water flow.

Next, assemble the required supplies. Hardware stores carry PVC pipes and fittings at reasonable prices. Based on the anticipated water volume and the design of your property, select the pipe diameter that is appropriate. Get necessary equipment as well, such as a saw for cutting pipes and PVC cement for joining them.

Connect the PVC pipes and fittings to complete the drainage system assembly in accordance with your designed layout. To enable water flow, start by excavating trenches for the pipes, making sure they have a slight slope. To make turns and get around obstacles, use elbows and connectors. To stop leaks, use PVC cement to seal all joints.

After everything is put together, fill the inlet with water to test the drainage system. Keep an eye on the water’s trajectory to make sure it flows smoothly in the direction of the exit points. Optimize performance by adjusting the slope or layout as needed.

After testing and verifying that the system is operating as intended, fill in the trenches and backfill with soil. If you want to shield the pipes from debris clogging, think about covering them with a layer of gravel or permeable fabric. Maintain the drainage system on a regular basis to ensure that it remains effective, particularly following periods of heavy rain or seasonal changes.

With a little effort and these instructions, you can use sewer pipes to construct a rainwater drainage system that will help shield your home’s foundation and landscaping from potential water damage. Though this do-it-yourself method can save costs, it’s always a good idea to consult a professional if you have any questions or concerns about complicated drainage problems.

Video on the topic

This is what the sun did with the sewer pipe, on the drain of the roof

Budget drainage system, with your own hands

DIY roofing gutrs/gutter for the roof with your other Hands

A simple version of the drain system for the roof from sewage pipes

Gutter gutter from a sewer pipe, simple and cheap!

The cheapest spills from sewer pipes.

Drain from sewer pipes, tolls

What type of heating you would like to have in your home?
Share to friends
Sergey Ivanov

I like to help people create comfort and comfort in their homes. I share my experience and knowledge in articles so that you can make the right choice of a heating and insulation system for your home.

Rate author
Add a comment