How to combine two heating radiators among themselves

Radiators are essential for effectively heating our homes because they disperse heat throughout the various rooms. It may occasionally be necessary for you to combine two heating radiators in order to maximize their efficiency or to meet particular heating requirements in your house.

Combining two radiators may seem like a simple task, but to make sure they function well together, you must do it carefully and precisely. Knowing the procedure can help you accomplish the intended goals more successfully, whether you’re trying to balance the heat distribution throughout several areas or boost the heating capacity in a specific room.

We’ll walk you through the process of safely and effectively combining two heating radiators in this article. We’ll go over the necessary tools, how to connect them correctly, and some crucial pointers to keep things running smoothly. By taking the appropriate steps, you can improve the heating system in your house and make it more comfortable for you and your family.

How to properly connect heating radiators among themselves?

A lot of homeowners are dissatisfied with how well their apartments are heated. This problem is particularly severe when it’s really cold. Sometimes a worn-out radiator is the cause of poor heating. In this instance, more effective and potent machinery takes the place of the heating structure. Aluminum radiators, bimetallic radiators, and ceramic heating batteries are all available today. Cast-iron models, however, continue to be the most dependable and robust models. It is not practical to change the battery if it is in excellent condition. In this instance, the radiator can have sections added to it. The topic of this article is how to extend the heating battery.

What are the battery connection schemes?

There are multiple at the moment.

According to experts, if a scheme is chosen poorly, 50% of the heat could be lost.

Incorrect attachment of additional sections will cause uneven system warming. Even the smallest mistake can result in leaks and breakthroughs. As a result, it’s critical to understand how to connect the heating batteries correctly and to proceed with extreme caution.

The following lists the methods for connecting radiators:

1. Conservative connection. Only one pipe is involved in the work;
2. Parallel. Two pipes are used in the work. In this case, the batteries are connected to each other through the upper and lower bouncers;
3. The connection is through. In this case, the coolant is not delayed through the batteries, but flows through the heater system.

It should be mentioned that the most dependable and financially sound method is to connect heating radiators consistently. Using a single complete heat carrier supply channel is the method that is easiest to implement.

What is required to build a battery?

You must determine how many sections to install in order to install the heating radiator in a way that will maximize the room’s heating efficiency before connecting it. and purchase the necessary quantity of extra sections. Cast iron is a better option.

Additionally, make sure you have all the required tools and materials before properly connecting the heating radiators.

• pipe key;
• radiator key;
• nipples for heating systems;
• side traffic jams for radiators with right and left threads;
• Intersecision gaskets for radiators;
• Paronite gaskets;
• sandpaper.

How to connect a battery?

Correct radiator construction is impossible without knowledge of the heating system’s working principle and how to combine heating batteries.

Preparatory work

First things first, there is work to be done in preparation. This involves taking the radiator apart. The sections that are supposed to be built must be removed.

The battery needs to be cleaned of all dust, dirt, and rust.

Examine the opening where the thread connecting the building to the pipe was. Growths could be present. Sandpaper must be used to remove them. If not, the installation of the intersecination laying will be uninstallable. And this may result in the heating system turning on.

Accession of sections

Sections are also connected. The battery is firmly assigned to the connected sections. Create a gasket. The radiator key is used to measure the distance to the nipple. The battery’s nibble is placed onto the designated length. Scrolling through the pipe key is the radiator key. The nipple is then divided into two opposing sections. Turn a radiator key three times. The lower portion of the battery is operated in a similar manner.

After that, side corks and paronite gaskets are removed and put into the battery. They use a pipe key simultaneously. The key is to tighten as much as possible to form a sturdy, sealed structure. portion that is fixed to the radiator. The other sections are related in a similar way.

Radiator mount to the wall

The radiator is mounted to the wall after all other sections are fastened. Set hooks at the battery level to accomplish this. The artwork is suspended. Fittings are used to secure every joint. Take a wrench and make puff. A sealant is applied to every joint. Specialized adhesive tapes for pipes have just started to be sold.

Verification work

One end of the resulting design is placed into the pipe, and the other end is placed into the battery. A tight wrench is used to twist the joints. Waterproofing is done after the fitting installation is finished.

Following the completion of the heating battery assembly, the system is examined for flaws. A test coolant launch is conducted if everything checks out. the initial launch of water under low pressure. This enables you to identify areas with low-quality connections and leaks. The water is shut off and the process of fixing the issue starts if subteces are discovered. On the second attempt, the coolant is released at standard pressure.

Following the connection of the heating battery, the radiator must run for a few hours. After that, examine the state of the batteries, fittings, and pipes.

What kind of battery connection scheme to choose?

Since you can arrange heating radiators in various ways, think about which arrangement will work best for you and be more convenient.

The most common configuration for radiator connections is sequential. because it offers a high degree of dependability. requires very little upkeep. The technical expenses are negligible. This scheme allows for the connection of up to four batteries. The system is linked to the heating device from below. It is necessary to install spacers when pipes or radiators start to droop.

The only drawback to connecting batteries in this way is significant heat loss. The battery cools by roughly 7 degrees when water enters the upper portion of the system. It will be worse when the apartment’s final radiators turn on. The battery located farthest away can have a temperature differential of up to eighteen degrees. The room will heat up unevenly as a result. However, there is a solution: install a second electric boiler.

Connecting heating radiators – how to connect batteries correctly

The purpose of the heating system is to keep everyone warm whether they live in a house, an apartment, or another structure; however, the heating radiator connections need to be made correctly. The range of 18 to 25 degrees Celsius is considered to be the comfortable temperature for the air in the room. Heating appliances should have enough capacity to offset heat loss through windows, doors, walls, and other barrier structures that face the street.

Prior to the commencement of construction, during the building design phase, the plan that establishes the connection of the heating radiators within the structure is chosen. It is true that repairs or improvements to the heating system can be made while the space is being used.

Of course, connect to a better solution if one exists for the village’s Central Heating mains heat supply problem. When there is no central heating, the configuration of an independent heating system comes into play.

Factors affecting the efficiency of heating

Various factors determine the heating structure’s effectiveness.

1. Wiring elements of the heating system. The degree and uniformity of the heating of the room depends on the correctness of this work, and accordingly the amount of cash expenses spent on the heat supply of the house or apartment.
2. The choice of heating equipment. Everything that is necessary to create a heating system is acquired on the basis of a professionally performed calculation of technical and financial indicators. The fact is that the decision, how to properly connect the heating radiators and the choice of appropriate equipment helps to achieve maximum heat transfer with a minimum fuel consumption.
3. Method of installation trunk pipelines, heating boiler, circulation pump, connection of heating batteries, regulating and locking elements. The incorrect installation of any of the links of the heating structure may be completed by the failure of the entire system.
4. The presence of special knowledge and skills conducting work related to the design and installation of heat supply structure. Perform calculations and determine the heating scheme of the house, including the option of how to connect heating radiators in a particular case should be professionals in the field of heating equipment. Despite the fact that the involvement of specialists will lead to an increase in the costs of arranging heating, it should not be saved on this.

When it comes to combining two heating radiators in your home, it"s essential to ensure efficient and even heat distribution throughout the space. To achieve this, you"ll need to connect the radiators in parallel, allowing hot water to flow into both units simultaneously. Start by identifying the inlet and outlet valves on each radiator. Connect the inlet valves together using a T-piece connector, ensuring a secure and leak-proof seal with the appropriate fittings. Similarly, connect the outlet valves with another T-piece connector. Make sure to use the correct size and type of pipes for your system to maintain optimal water flow. After connecting the radiators, bleed the air from the system to prevent any airlocks, which can hinder performance. Finally, check for any leaks and insulate the pipes to improve energy efficiency and reduce heat loss. With these steps, you can effectively combine two heating radiators to enhance the warmth and comfort of your home.

Selection of a heating battery connection scheme

The connection diagram for the home’s heating batteries is established once the type of heating boiler has been selected. Either one or two pipes may be used.

There are three methods to apply radiator eyeliner:

In the event that unilateral pipes are chosen as a solution to the heating battery connection problem, the total number of sections on a single device should not be greater than 12 for gravity heating systems and 24 for systems with a circulation pump.

If more sections need to be installed, utilize the flexible pipeline eyeliner to heat the radiators. The throughput of a straight pipe and return, which is dependent on their diameter and roughness coefficient, should not be overlooked when installing heating devices. If the batteries are at their best, or if the devices are installed at the right distance from the walls, the floor, the window, and the window sill, effective heat transfer can be accomplished.

The following standards are covered in the installation instructions and how to connect the heating radiator correctly:

• The device should be at a distance of 10 – 12 centimeters from the floor;
• It should be installed no closer than 8 -10 centimeters to the windowsill;
• The back panel cannot be placed closer than 2 centimeters from the wall;
• When installing batteries, it is necessary to provide for the adjustment of their degree of heating, both in manual and automatic mode. For this, special thermostats are purchased (more details: “Adjusting taps for heating radiators, installation of the valve");
• In order to carry out repair or replacement of the radiator, gate valves, valves and manual cranes should be provided. They will allow you to turn off the product from the heating system;
• On the devices you need to put the cranes of Maevsky, such as in the photo. With their help, remove air that enters the system.

Recommended connection of heating radiators

Installing steel or other types of radiators follows a specific order:

• carry out preliminary markings for placing brackets that are attached to the wall;
• Maevsky’s taps are mounted on devices;
• install different locking and other elements – valves, plugs, taps and regulators;
• Before connecting the heating radiator, it is placed on the brackets and aligned with a horizontal level;
• the device is connected to the pipeline using transitional leads;
• put testing and trial launch of water.

Consistent connection of heating radiators

With this technique, a single pipe is used to combine the batteries. In most cases, increasing the number of sections to the highway’s end is necessary if a sequential connection of heating radiators is required in order to boost the heating devices’ power and guarantee a suitable level of room heating.

An uneven distribution of thermal power is a characteristic of the sequential connection method. Consequently, the device, which is the latest in the scheme, will barely be warm as the first radiator heats up much more strongly than the others.

This method is popular because it is simple and allows for the desired degree of heat transfer to be adjusted by increasing multiple battery sections located at different points in the heating structure, despite a few drawbacks. In the video, examples of how to connect heating radiators:

Proper connection of heating radiators, connection of two batteries

Heating radiator connections

Heating radiator connections

Heating radiator installation should happen after other elements, like windows and doors, have been completed, whether it is a new building or just a renovation of an apartment complex or private estate. Simultaneously, you need to plan ahead and choose the type of heating radiator connection you’ll be using. You should also gather the required supplies and equipment.

How should a heating battery be connected correctly? It doesn’t take much time or effort to install the radiator itself. First things first, battery mounts must be installed. The quantity of radiator sections directly determines their number and placement. Next, install the radiator itself, connect everything, and bring the pipes. Take the connection of a heating radiator using polypropylene pipes, for instance.

Options for heating systems

One- and two-pipe heating systems are the most popular and in-demand types. Give each one more thought, as well as the proper way to connect the heating batteries in each situation.

Buildings with multiple stories are the primary use for single-pipe heating systems nowadays.

Warm coolant is uniformly distributed throughout the heating components as it travels down the pipes from top to bottom. A system like this is very simple to install and only needs a small amount of supplies. However, there are also a number of drawbacks:

• there is no possibility of adjusting the degree of heating of individual radiators;
• On the lower floors, the temperature of the batteries can be significantly lower than on the upper ones, since the coolant reaches them already cooled;
• In case of breakdown on any floor, the entire riser is turned off;
• It is difficult to disconnect from the system for installing autonomous heating.

A single-pipe heating setup

The most common application for a two-pipe heating system is in private homes and cottages. It suggests connecting two pipes to the radiator simultaneously: one pipe brings hot coolant to the battery first, and the other pipe creates the outflow of water that has already cooled. Simultaneously, it is crucial to remember that every radiator in the two-pipe system is only connected in parallel.

A heating system consisting of two pipes offers numerous noteworthy benefits. First of all, regardless of how far they are installed from the boiler, every radiator will always have the same temperature.

Additionally, this kind of system allows you to customize each room’s temperature to your liking by allowing you to change the amount of heat that each radiator emits.

A heating system with two pipes.

The components of this kind of heating system are as follows:

• radiator with a valve in the upper part and a plug in the lower;
• radiator traffic jams;
• a valve with a thermostat;
• bypass;
• shank;
• stopcock;
• couplings and countrogikes;
• Heating pipes (metal, polypropylene).

The heating system’s composition

It should be mentioned that installing a single-pipe heating system can be done with the same set of parts—the only exception being a valve that has a thermostat and bypas.

Types of connecting pipes and radiators

Heating battery connections may occur:

• lateral – such a connection of the battery to the heating system is the most common. With this type of connection, the pipe with a hot coolant is brought to the upper pipe, and the return pipe is connected to the lower. That is, both pipes are located on one side of the radiator. Such a compound of heating batteries is the most productive – with it the smallest heat loss is observed. However, you should not use such an attachment of heating radiators, the number of sections of which is more than 15.
• Diagonal connection of heating batteries – used for fairly long batteries. With this type, the pipe with a hot coolant is connected to the upper pipe of the radiator on one side, and the outflow of the cooled coolant – to the lower pipe on the other side. This connection of the heating radiator allows the coolant to spread throughout the radiator as uniformly as possible. It is important to take into account – if you choose a diagonal connection of heating radiators to each other, but at the same time, hot water is supplied through the lower pipe, and the outflow through the upper, the efficiency of the system will decrease by about 10 %.
• Lower compound of heating radiators. Used only when heating pipes are hidden under the floor. The efficiency of radiators connected in this way is about 10% lower than those that are connected by the lateral method.

INSUCTIONS CHOICESCHOICES

Types of radiators for strapping

You must choose the type of radiators you want to use before moving further with building the heating system and connecting the heating batteries. There are a plethora of battery types available today. They may differ in:

• material;
• the principle of how to connect a heating battery;
• The method of attachment to the wall.

These days, the most popular kinds of radiators are as follows:

• Steel panel batteries – are a relatively thin panel of flat steel plates. How to correctly connect a heating radiator of this type? This type of radiators are connected by a lateral or lower way.

Steel panel batteries

• sectional radiators. Lighted sectional model made of aluminum (there are also bimetallic radiators of this type). How to properly connect the heating batteries in this case? You can connect such batteries with several sections or one by one. For such radiators, it is best to use polypropylene pipes, the type of connection is lateral.

Aluminum sectional radiators

Notably, bimetallic batteries have been installed more frequently in apartments with central heating recently, replacing cast iron ones. Numerous factors have contributed to this change. Cast-iron radiators are heavier and more substantial, to start. Additionally, sand and rust start to appear in these radiators as a result of the low-quality water used as the heating system’s coolant. These factors collectively contribute to a reduction in the heat transfer of radiators. Bimetallic radiators eliminate these kinds of issues.

Panel radiators are an option for a private residence. Depending on the client’s preference, they can be made of steel or aluminum.

The most important thing is to follow all installation regulations. It is crucial to keep in mind that radiators made of aluminum or steel can be connected to copper pipelines. Additionally, installing only aluminum batteries is permitted if the pipeline is made of regular pipes.

What is needed to connect radiators

The process of building a heating system is not easy. In the meantime, the novice will be able to handle it if they follow all the guidelines and follow a clear task sequence. How should a heating battery be connected correctly? Attention is the most important factor. Certain components are required for proper radiator installation and connection. Specifically:

• adapters with right and left threads (footbags);
• tools for high -quality screwing adapters;
• plugs, manual air vents, a key for air sustaining, adapters;
• locking reinforcement, ball valves, valves;
• Pipes.

Prepared to install a radiator heater

Binding with polypropylene pipes – the principle of execution

Polypropylene pipes have grown in popularity recently. Naturally, any other pipes can connect heating radiators and strapping properly, but the majority of experts advise against choosing any other pipes.

Using polypropylene angular ball valves for strapping makes the most sense because they are reasonably priced and much easier to install.

The following is how polypropylene pipes are used for strapping:

• In a multiflex connecting with any output, a coupling with a rug nut is inserted;
• by pre -attached brackets, pipes are fixed on the wall. It is important that they do not touch the wall, but are 2-3 cm from its surface.

One benefit of using polypropylene pipes is that they can be installed directly into the wall, and the pipe’s edge—which is required to complete the binding—is visible right next to the radiator. Many people can use fasteners to repair batteries. Professionals most frequently use a pin connection that is fixed to the wall’s surface for this purpose. Use standard brackets to hang radiators if you so choose. Just to be clear, fasteners are typically sold with panel batteries. However, the mount for sectional radiators needs to be bought separately.

We nearly understand the proper way to connect the heating radiator. The cranes are connected in the manner described below:

• Initially, the crane must be disassembled;
• A fitting with a united nut is screwed into the radiator;
• Using a special key, tighten the nut.

You will need to use a special key sufficient to achieve a high-quality execution of this simple move; otherwise, you won’t be able to tighten the "American" normally.

Together with this key, you’ll also need the following when installing and strapping radiators and combining two heating batteries:

• seals;
• a set of keys;
• tow;
• threaded pasta;
• Threads for carving.

Equipment and supplies needed to install heating radiators

Method	Description
Series Connection	Join radiators in a line. Hot water flows through the first radiator, then into the second, heating both sequentially.
Parallel Connection	Each radiator gets its own flow of hot water directly from the source. This can provide more even heating across the radiators.

A workable way to raise the overall effectiveness and performance of your home’s heating system is to combine two heating radiators. This process offers more control and customization, whether your goal is to improve the warmth in particular areas or balance the heat distribution throughout the room.

It’s important to plan and evaluate your existing heating system before you begin connecting radiators. Make sure your heating source, such as your boiler, can support the extra load to prevent any strain or inefficiencies. Seeking professional advice can yield insightful information and direction specific to the needs of your house.

Regarding the connection itself, there are a number of approaches and setups to take into account. Depending on your needs and the design of your heating system, you can choose a parallel or series arrangement. Whichever approach you decide on, don’t forget to use premium pipes and fittings to assure longevity and reduce the possibility of leaks.

To sum up, integrating two heating radiators can be a simple and efficient approach to maximize the heating potential of your house. You can achieve a more balanced and efficient heating system that improves comfort and lowers energy costs with careful planning, accurate assessment, and high-quality installation.

Video on the topic

Wow…It will not be a lot of. Connection 20 sectional bimetallic battery.

How to combine heating radiators

How to build a bimetallic or aluminum heating radiator