Hot water recirculation

Imagine not having to wait for the water to warm up before stepping into your morning shower and feeling the warm water pour over you. Imagine being able to make tea or wash dishes right away when you turn on the hot water tap in your kitchen. Hot water recirculation is a clever plumbing solution that enables these situations.

Systems that circulate hot water in the home are like the unsung heroes of efficiency and comfort. They quietly operate in the background to guarantee that hot water is always available at all of your home’s faucets, cutting down on wait times and water waste.

So what’s the real mechanism behind hot water recirculation? It basically entails running hot water through a loop that is connected to all of the fixtures in your house by your water heater. The pump in this loop keeps the water flowing and stops it from cooling down while it is sitting in the pipes.

Convenience is one of the main advantages of a hot water recirculation system. No more wasting valuable gallons of water by impatiently waiting for the water to warm up. You can always have access to instant hot water with hot water recirculation, whether you’re washing dishes, taking a soothing bath, or doing laundry.

Benefit Hot water recirculation ensures instant hot water at the tap.
Function It circulates hot water continuously through the pipes, eliminating wait times.

Options for providing hot water supply

There are various ways to guarantee that a private home’s tap will always have hot water:

You can select a water heater that will run independently of the heating boiler or on a flow of water. A gas or electric water heater is an option. The term "gas heater" refers to a gas-powered flow-through water heater.

Installing a water heater is the first step in installing a hot water supply system in a private home or cottage.

Use of a two-circuit gas boiler

A two-circuit boiler with water flow heating is the best option for a private home with few water outlets intended for simultaneous use only with washbasins. Up to twenty liters of hot water can be produced per minute by these boilers. This is the most straightforward and cost-effective option.

Making a cold water supply pipe is required for the installation of this hot water supply system, after which hot water can be obtained from the boiler outlet. It is important to remember that hot water cools down in the pipeline over time, so you may need to wait for hot water to run from the tap.

In the world of home heating and insulation, ensuring efficient hot water circulation is key to comfort and savings. Hot water recirculation systems are like the unsung heroes of your home, quietly ensuring that you have instant access to hot water whenever you need it, while also saving you time, water, and energy. By continuously circulating hot water through your pipes, these systems eliminate the annoying wait for hot water to reach your faucet or shower, especially in larger homes or buildings. Not only does this convenience make daily life smoother, but it also reduces water wastage from letting the tap run and cuts down on energy consumption by avoiding the need to repeatedly heat up cold water. With hot water recirculation, you can enjoy the luxury of instant hot water while also being kinder to your wallet and the environment.

Gas boiler with a built-in boiler

This kind of hot water supply is much more convenient to use and offers the chance for improved heating stability when compared to the previously described variant.

With this option, you can always have between forty and sixty liters of hot water on hand. However, this system has drawbacks in addition to benefits:

  • Large dimensions and weight.
  • Large expenditure of fuel resources in order to maintain a stable temperature of water in the boiler.
  • High price.

These kinds of systems are hardly ever used.

Recirculation through an indirect heating boiler

When there is a relatively high demand for hot water, a single-circuit boiler with an external indirect heating boiler is the best choice for setting up recirculation. In such a bundle, hot water recirculation is typically employed.

You can use two or more showers, bathtubs, or Jacuzzis at once with this system. Installing an indirect boiler with a capacity of one hundred to one thousand liters is a common practice among homeowners.

In a system like this, water is heated by traveling through a boiler, which is a big tank with a coil of tubing. The boiler spiral circulates the heating system coolant, heating the boiler’s water. In this system, the heating boiler runs all year round, in contrast to the flow or storage water heater options.

The majority of boilers used for indirect heating have a steel enamel tank. Moreover, the inner tank of some high-end models is made of stainless steel.

Recirculation of the DHW hot water system.

The arrangement of hot water recirculation is as follows:

Along with cold water, hot water from the boiler and storage tank is delivered to the taps via internal plumbing. Since hot water pipes must be insulated, the water in the pipes cools down if left unattended for eight or ten hours.

It takes approximately five minutes for the hot water to run out if the tap from the boiler is farther away, such as on an upper floor.

A system with hot water recirculation should be selected if there is no desire to constantly empty the tap. Although this type of system has supply and return pipes, it is incredibly comfortable and convenient.

Hot water circulation in the boiler

It is not permitted to use a pump for the heating system; instead, water must be moved from the boiler through the pipes and in the opposite direction using a recirculation pump for hot water supply. The pump uses minimal electricity and is permanently linked to the network.

The rate at which water flows out of the tap is independent of the pump’s operation. All it does is guarantee the water’s passage to and from the boiler.

The towel dryer in the DHW recirculation system is linked in series with the pipe circuit. With this connection, the towel dryer will always be heated, even if the room’s heating system is off and the DHW system is on.

Boiler models with electric heating elements installed are available. This boiler can be used as a storage electric water heater, which is very handy in the event of a gas cut-off or boiler maintenance.

A safety group, which needs to be outfitted with the following, must connect the pipeline that supplies cold sanitary water to the boiler system.

  • A shut-off valve.
  • Check valve.
  • Safety valve.
  • The expansion tank of the hot water system, and it must have the required volume.

In that instance, it is required to disconnect a circulation pump from the electric grid and close a ball valve on a circulation pipeline if the towel dryer is not required to be heated during the summer. It’s crucial to connect the hot water supply line to every appliance that uses hot water when installing the hot water system. The return pipe is where the towel dryer and circulation pump are supposed to be installed. If the system is not installed in this manner, hot water use will heat the air in the room where it is located and the towel dryer.

The most user-friendly and cozy system is one that includes a boiler and hot water circulation, but it is far more expensive than a basic system.

The age-old issue of waiting for hot water to reach faucets and showers can be effectively resolved with hot water recirculation systems. These systems ensure that hot water is always available when needed, saving time and money by reducing water waste and the annoying wait caused by constantly circulating hot water through the plumbing system.

Saving energy is one of the main advantages of hot water recirculation. These systems reduce the need to run water wastefully until it reaches the desired temperature by shortening the time it takes for hot water to reach the tap. This leads to lower utility bills and a more ecologically friendly home by conserving water and lowering energy consumption from heating water.

Additionally, hot water recirculation systems can improve the convenience and general comfort of the house. There will be no more chilly showers or waiting for the water to warm up before doing the laundry or dishwashing. Instant access to hot water improves daily routines and efficiency, which raises residents’ quality of life overall.

It’s important to balance the initial expenses of installing a hot water recirculation system with any potential long-term advantages. Although installing and buying the system requires an initial outlay of funds, the system’s long-term cost savings on energy and water frequently outweigh the cost. Furthermore, a lot of homeowners think that the extra comfort and convenience make the initial outlay worthwhile.

To sum up, hot water recirculation systems provide a workable, economical solution to the frequent issue of having to wait for hot water. Through constant circulation of hot water through the plumbing system, these systems minimize water waste, offer instant hot water availability, and enhance overall home comfort and convenience. Although there might be initial expenses, many homeowners find that the long-term advantages in terms of energy savings and enhanced quality of life make them an investment well worth making.

Video on the topic

Hot water recirculation manifold

DHW recirculation

Collector connection of water supply. Hot water recirculation line.

DHW recirculation scheme – the best solution!

DHW recirculation. Wiring diagrams

Hot Water Recirculation – Do it Right!

21 Hot water recirculation scheme

Hot water recirculation, DHW – what it is and how it works

What type of heating you would like to have in your home?
Share to friends
Sergey Ivanov

I like to help people create comfort and comfort in their homes. I share my experience and knowledge in articles so that you can make the right choice of a heating and insulation system for your home.

Rate author
vDomTeplo.com
Add a comment