Heating schemes with warm floor and radiators in a private house

The correct heating system is essential for keeping your house warm during the cold months. Two well-liked choices in home heating stand out: traditional radiators and warm floor heating. But when you can have both, why pick just one? This is where the idea of using radiators in a private home in conjunction with warm floor heating comes into play.

Imagine sitting by a warm radiator on a chilly winter evening, or stepping out of bed onto a warm floor on a frosty morning. Offering the best of both worlds, this hybrid heating system efficiently heats and comfortably warms your entire house. Warm floor heating and radiators can be strategically integrated to achieve optimal temperature control and energy efficiency, keeping your home cozy and welcoming in every corner.

So how does this system of hybrid heating operate? Well, synergy is the key. Radiant heat is used in warm floor heating to gradually warm the floor and, as a result, the entire space. Radiators, on the other hand, use convection currents to move warm air around. These two systems work together to distribute heat evenly, removing cold spots and guaranteeing constant warmth from floor to ceiling.

However, the advantages go beyond comfort. Significant energy savings can also result from the integration of radiators and warm floor heating. Warm floors use less energy and produce less heat loss because they run at lower temperatures than conventional heating systems. Radiators, on the other hand, deliver quick heat bursts when needed, enabling you to maintain comfortable temperatures without continuously running your heating system at maximum capacity.

Furthermore, this hybrid heating approach’s adaptability makes it appropriate for a range of house styles and climates. You can modify the system to suit your unique requirements and tastes whether you’re building a new home or remodeling an old one. Customizing your heating setup can involve anything from integrating renewable energy sources to controlling the temperature of each individual room.

Norms and restrictions

Low-temperature, warm-water floor heating system. The coolant’s maximum temperature should be +55 degrees, per current standards. The standard heating typically varies between +35 and +45 while in operation, and the floor can reach temperatures of +26 to +31. Different rooms have different norms.

• for the bedroom, kitchen, living room – +26;
• for a bath, toilet, hallway – +31.

The pump is circulating through the floor thanks to the liquid. Furthermore, it enables you to modify the room’s temperature. It must be chosen to push against the water’s speed. The highest speed that is allowed in a hydropolis is 0.6 m/s.

There shouldn’t be a 10-degree difference in the temperature of the heated water in the chains between the supply and output.

Features of the combined system

Warm floors and radiators with high and low temperatures are components of the combined heating system.

Two methods exist for connecting a water floor in a mixed scheme:

1. To the existing heating boiler – this method reduces the cost of equipment and installation time. The disadvantage of this design is the inability to work autonomously. In this case, energy consumption increases, and the efficiency of the floor is reduced.
2. By installing a separate boiler equipment for the floor – this significantly increases the costs of installation. However, such a system has an advantage – autonomy, its work does not depend on the batteries. This is convenient when radiator heating does not function anymore.

When considering whether to install joint heating in a private residence, it is important to consider the following recommendations:

1. Set temperature conditions separately for batteries and warm floor. Since in batteries the heating of water at the supply and output is about 70 and 55 degrees, respectively, and 40 and 30 are required for heating floors, the boilers will not be able to cope with this task on their own.
2. Apply special components to set up heating. Passing and mixing nodes, locking reinforcement-they will reduce costs, and will correctly connect the system with the capacity in which water is heated.
3. Set up a combined system using special and correctly installed technical means. For example, a mixing node with a thermostatic head, its function – adjusting the level of fluid heating, thermostat – is responsible for controlling the degree of heating of each room separately.

It makes little sense to confine yourself to the restroom and toilet when installing a water floor. Since an increase in the system’s area has little effect on installation or operating costs, it is preferable to install it wherever possible.

It is true that installation of a mixing unit and a mechanism to guarantee liquid circulation are required. It doesn’t matter if there are one, two, or more pipes in the collector group.

Even if the floor is installed in just one area of the room, the screed costs will remain the same because concrete must be poured throughout the space.

The pumping-mixing node

In a private home, a pump mixture can be used to construct a heating system in accordance with a combined scheme. Although the design with it is the most efficient, it will cost more than a 3-running valve even though the principle of operation is the same.

The presence of balancing cranes makes it possible to dilute hot coolant in the proper proportions by using cooling water from the return pipe.

There are various trim levels for this node. It is dependent upon the equipment’s cost and intended use. The typical gadget consists of:

• thermostatic valve;
• submersible thermal sensor;
• Balancing crane with a fixing spring valve;
• circulation pump;
• submersible thermometer;
• threaded sleeve;
• bypass and shutter valve;
• drainage and ball valve;
• air vent;
• bypass bypass.

Schemes and instructions for installation from one boiler

A plan with a radiator and a heated floor powered by a single boiler is the easiest and most affordable way to install a combined heating system in a private home. It already has the circulation pump and all of the other components mounted.

Boilers that are mounted on walls have pre-built pumps within. The floor model requires separate installation when in use.

Installing capacitance for condensate is advised when setting up a combined heating method in private homes with a direct connection to a gas device (this model is the one that experts advise installing). Installing a traditional gas boiler will cause the heat exchanger to fail quickly.

Gas equipment is installed in spaces with at least two meters of ceiling height. Make sure there is airflow.

If a solid-fuel model is chosen, a buffer capacity must be installed in order to connect a warm floor to it. Since direct temperature control is challenging, its purpose is to restrict the temperature range.

The following is the idea behind heating using a combined scheme, which uses a single boiler to heat both the warm floor and the battery. The mixing node receives heated water, which is deposited against the safety head. When the temperature of the thermal head rises above a certain point, a valve opens, partially mixing the hot and cold coolant.

Subsequently, the water is dispersed via the floor and battery contour highways. The pipeline returns to the heat generator for heating after passing through the whole length of it.

The following components come from a single boiler that heats floors and batteries:

• A boiler with an expansion tank – heats the coolant;
• hydraulic shooting – wiring, in the form of a pipe with four branches, water moves along them;
• radiator and sexual pump – they provide fluid supply to the collector node;
• Collector – floor loops are connected to its exits, and hot water is supplied;
• mixing node – in it there is a dilution of the coolant for TP;
• Thermostat is a head that opens or closes the flow of water into the contours.

System installation

Once the floor’s "pie" has been constructed, which involves aligning the base, installing heating elements, and installing thermal and hydraulic insulation, you can move on to the installation process and link the system’s combined heating from a single boiler (warm floor and radiators). We’ll break down the procedure step by step:

• The boiler is installed and its strapping is carried out (in a private house it is more often mounted in a separate building). The room should have a chimney and an air flow.

• Pipes are connected from radiators with a water heater, a pump is mounted between them.

• The contours of the floor are connected through a device in which water is diluted to the required temperature. For this, they are used: a mixing node, 2 or 3-seated valve, they are attached to the supply pipe.

• The circulation pump is installed.

• The contours of the floor are connected through a comb with a source of hot water supply, it is it that is a coolant, and will heat the room.

The selection of an appropriate heating system is essential for creating a cozy home. Warm flooring combined with radiators is a great design for private homes. This configuration combines the flexibility and efficiency of conventional radiators with the cozy warmth of underfloor heating. Warm floors guarantee warm toes and a cozy atmosphere throughout the house because they distribute heat evenly. Radiators, on the other hand, work well as heat sources in spaces that need quick heating or precise temperature control. Through the balancing of these two approaches, homeowners can create a cozy haven in the winter without compromising convenience or energy efficiency.

Mixing valve schemes

Experts recommend that private homes should prioritize a combined heating system with two or three chassis and a mixing valve.

With a 3x-lane mixing valve

The liquid in this radiator combined circuit reaches a temperature of 80 degrees, and it requires 40 degrees to warm floors.

The primary responsibility is bringing the water temperature from the radiators down to the minimum needed to heat the floors. The third thermostatic head that is in operation has this issue resolved.

The system works on the following principle: heated water is sent from the heat source via this device to the collector, where it is mixed with chilled coolant from TP’s backbone to the appropriate degree. The liquid is supplied to the floor’s contours in this condition.

One limitation of this combined scheme is that the intake of cooled water from the return cannot be limited or adjusted. In this sense, the highway will come into contact with both excessively cold and hot water, which may cause the floor to overheat or not warm up enough.

Nevertheless, because a concrete screed balances out these temperature variations, they can go unnoticed.

The three-way valve system is inexpensive and simple to install. It works particularly well in one-story private homes and small rooms.

The device mixes heated and chilled coolant if a three-way valve with bypass is utilized.

• The tee is installed for the feed;
• After, a circulation pump is connected.

With a 2x-lane mixing valve

The temperature at the floor pipeline entrance is managed by a two-way valve with a thermostatic head.

It is advised to use the scheme in rooms that are spacious but do not exceed 200 square meters. It is possible to modify the level of liquid mixing for the warm floor circuits by having a balancing tap. He has the ability to control the hot water flow.

A ring-shaped coolant circulation system is intended to allow heated water to be added as the temperature falls. The adjustment proceeds smoothly and without jumps because of the device’s low throughput.

In order to force the liquid to circulate, a device must be installed. It is also mounted on the feed.

Using a built -in boiler pump

Under this scheme, boiler equipment with an integrated pump capable of producing up to 35 kW of power is used. He applies 20 to 25 kPA of pressure to the container’s exit while using 1,000 to 2,500 liters of water per hour.

Although the additional pump for the warm floor is not needed, the installation procedure is comparable to the diagram from the standard heater.

It is essential to correctly connect the device to the contours in order to maximize its potential and initiate the circulation of coolant in the heated floor and radiators.

This can be accomplished in this scheme by using a boiler with TP and a radiator in combination. One circuit is independent of the other since there is a tiny, low-hydraulic resistance common area connecting these two rings.

The boiler, radiator, and floor circuit all have air vents, and the slag filter in this scheme is a slag filter-gryazevik.

The water enters pipelines from the container where it heats up, which is the fundamental mechanism of the ring circuit. The liquid travels along the highways and returns back due to pressure surges in the feed and return pipes.

When you can combine systems

Installing a combined heating system is acceptable for any type of building. The most important thing is to select a warm floor type and final product that meet the specifications. Perfect heating for a two-story private home thanks to a combined design.

Warm air masses from the ground floor will rise and warm the second floor’s ceiling, where radiators are the only fixtures that can be added. Tiles are a better option for the ground floor’s finishing material, while any material will work for the second floor.

Since connecting hydropolis to the home’s main source of heat is forbidden, combined systems cannot be constructed in apartment buildings. The configuration of the heat exchanger is the output.

Heating Scheme	Description
Combined System	Uses both warm floor and radiators for efficient heating throughout the house. Warm floor provides gentle warmth, while radiators offer quick heating when needed.
Room-Zoned System	Each room has its own heating control, allowing customization based on usage. Warm floor in common areas ensures consistent warmth, while radiators in bedrooms offer individual comfort settings.

In a private home, combining warm floor systems with conventional radiators provides a flexible and effective heating solution. Combining convective heat from the radiators with radiant warmth from the floor results in the best possible heat distribution. Homeowners can maximize energy efficiency and enjoy comfortable temperatures throughout their living spaces by combining the advantages of both systems.

This heating scheme’s flexibility is one of its main benefits. Warm floor systems are excellent at delivering steady, low-level warmth, which makes them perfect for places like kitchens and bathrooms where people frequently walk barefoot. Radiators, on the other hand, are efficient at swiftly increasing the temperature in larger rooms or places with high heat loss, guaranteeing prompt comfort during the winter. Through the strategic integration of these systems, homeowners can customize their heating strategy to meet the unique requirements of every room in the house.

Radiator and warm floor heating combined can also save money and increase energy efficiency. Warm floor systems use less energy and lose less heat by running at a lower temperature than conventional radiators. To further optimize energy consumption, thermostatic valves can be added to radiators to control temperature and prevent overheating. Homeowners can minimize their environmental impact and obtain more control over their heating by utilizing the complementary strengths of these two systems.

The combination of radiant and warm floor heating can improve a home’s overall aesthetics in addition to its efficiency and comfort. With underfloor heating subtly concealed beneath the flooring, homeowners are liberated from the limitations of radiators visible from the interior design possibilities. Greater freedom in furniture arrangement and room layout is made possible by this smooth integration, which improves the aesthetics and usability of living areas overall.

In conclusion, warm floor systems and radiators work well together to provide a heating solution for individual homes. Through the combined use of both systems’ advantages, homeowners can optimize comfort, energy efficiency, and visual appeal in every area of their homes. Whether it’s the rapid, dependable heat from radiators or the calming warmth of the floor under your feet, this integrated approach offers performance and versatility to meet the various heating needs of contemporary homes.

Video on the topic

How to connect a warm floor and heating radiators.

🔥 The simplest heating system! Warm floor and radiators

The best way to lay heating pipes in the screed 🔴 installed radiators in a house of aerated concrete

Warm floor and radiators, simple solution.

Combined heating system radiators + warm floor. House 120M2