Heating scheme with warm floor and radiators

Our choice of heating system is very important when it comes to keeping our homes warm and comfortable during the winter. Combining traditional radiators with radiant floor heating is a common way to achieve warmth. This dynamic pair ensures that every part of your house stays warm when the temperature drops by providing both efficiency and flexibility.

Installing heating components beneath the floor’s surface is known as radiant floor heating, sometimes referred to as a warm floor system. The heat produced by these components rises and warms the space from the bottom up. This technique not only guarantees uniform heat distribution but also does away with the need for ugly radiators to take up wall space.

But on really cold days, radiant floor heating might not always be able to deliver the necessary amount of heat quickly enough. Here’s where radiators become useful. In order to rapidly raise the temperature to the desired level, radiators work by heating the air around them and circulating it throughout the space. You can have the best of both worlds with this combination of heating methods: the rapid heat delivery of radiators and the consistent warmth of the floor under your feet.

The adaptability of this hybrid heating scheme is one of its main benefits. Each heating element can be independently controlled, giving you the freedom to personalize the temperature in each area of your house to suit your tastes. Radiant floor heating, for example, can be used to keep living areas comfortably warm, and radiators can be used to add extra warmth to frequently used areas like the kitchen or bathroom.

Furthermore, there may be a boost in energy efficiency when radiant floor heating and radiators are combined. In comparison to conventional forced-air systems, radiant floor heating operates at lower temperatures, which minimizes heat loss and energy usage. Radiators, which are easily regulated to only provide heat when needed, can be added to maximize energy efficiency and possibly reduce heating costs.

The pumping-mixing node for the boiler: combine radiators and warm floor

How can the water warm floor be combined with the radiator heating system? A single boiler for heating. With video, if at all possible.

Hi there, Khalil! to link a water-heated floor and heating radiators to the boiler at the same time. You need a collector node. The cost of purchase is between 10,000 and 20,000 rubles. Depending on the temperature), or, if you’re skilled, you can gather them by hand.

For instance, the Valtec Combi pumping unit, without collectors, costs approximately fifteen thousand rubles. VALTEC COMBI featuring an 180 mm pump

What is a mixing knot

Typically, the boiler heats water to a temperature between 80 and 95 °C, which is ideal for radiator use. Sanitary standards, however, state that the floor temperature shouldn’t be higher than 30 °C. In addition to being uncomfortable for the floor, exceeding this temperature may increase the release of hazardous materials from flooring (see the article on the risks of a warm floor and laminate).

The coolant temperature in the contours is no more than 55 °C due to the thickness of the flooring and floor screed. Because of this, hot liquid that has already gone through the system and managed to cool is mixed with a cooler to provide the water for the warm floor through the mixing node. In the video, the system operation scheme is displayed.

System elements

The hot coolant presses up against the safety valve when it gets to the collector. The thermal head measures the liquid’s temperature; if it rises above the predetermined limits, the valve is opened, mixing the hot and cold coolant.

Furthermore, they frequently use their hands to create a water-mixing node if the contours are lengthy. It has a circular pump installed, which raises the system pressure by forcing water through the pump. The node contains extra information in addition to the primary components (the pump and two- or three-way valve), such as the expansion tank, air cargo, drainage and cutting valves, and bypass (jumper).

It is not necessary for the mixing unit to be located directly at the entrance; it just needs to be installed in the warm floor circuits. Any room, including the boiler room and basement, can have a mixing node installed.

Two -lane valve

The mechanism of the two-way valve The temperature at the warm floor’s circuit entrance is continuously monitored by the thermostatic head on the two-way valve. It adjusts the valve’s position as needed to strengthen or weaken the water supply.

Hot coolant is added when the temperature drops, and the circulation system is set up so that the water flows in a circle. This option smoothly and without abrupt jumps regulates the temperature because of its low throughput. They typically use their own hands to install just such a collector for a warm floor. Nevertheless, rooms with a heating area larger than 200 square meters should not use it. RV 113’s two-road control valve in the background

Warm floor systems combined with conventional radiators can provide the ideal heating solution for those looking to live in cozy homes. By combining the rapid warmth of radiators with floor radiant heat, this creative method optimizes both comfort and efficiency. Homeowners can minimize energy consumption and enjoy consistent warmth throughout their space by strategically integrating these two heating methods. This hybrid system provides optimal temperature control and comfort all year round, with the warm floor providing gentle, even heat from below and the radiators providing rapid heat when needed. The combination of warmth from the floor and radiators produces a pleasing and effective heating scheme for any home, regardless of the weather—chilling winter nights or brisk mornings.

Three-way valve

This kind of three-way valve bypass device is essentially distinct from the earlier one. He adds heated coolant to the return. A damper, positioned perpendicularly between the feed and the return, is part of the valve. The proportion of warm to cold water is adjusted by shifting its location. These systems frequently have controllers with servo drives, which automatically adjust the temperature based on external factors like the outside temperature and interior temperature. P.

Schemes of mixing nodes

The schemes below show the butt installations assembly’s ready-made mixing nodes. The first choice works best for heating a room that is 15 to 25 square meters. manual temperature control. Installing a servo drive with controller or thermostat (vt.M106.0.230) is an option if automation is desired.

• Units are connected to the pipes (No. 6).
• The output of the hot coolant from the boiler is connected to the output No. 10, and to No. 11 – the return.
• The circuit can be supplemented with automatic air air.

The American man crane is the most effective way to connect the feed and return from the high-temperature circuit.

The node’s second iteration is likewise appropriate for heating 15-20 kV meters. However, because a thermal car with a remote sensor was installed, it has automatic adjustment, unlike the previous version.

• To connect it, the mixing valve (No. 1) is mounted by the “+” sign towards the American crane from the feed.
• The feed and return is connected to Americans through connectors with external threads (No. 4 – input, No. 7 Water output).
• The operation of the circular pump (No. 18) is directed towards the mixing valve (No. 1).
• The contours of the warm floor are connected to the exits under the number 12 and 22.

Valtec The third iteration of the collector unit is already appropriate for 20–60 kV, 2-4 heating circuits. An example with manual regulation is shown in the diagram.

• To connect, the supply from the boiler is connected to withdrawal No. 16, and the return to withdrawal No. 17.
• For good operation of the system, the length of the loops should be approximately the same.
• The scheme shows the option for two contours, but if you need to connect three or four pieces, then collectors (9) are replaced by one adjustable collector and one with ball valves (VTC.560n and VTC.580n).

The following scheme has automatic temperature control and can also be used to heat rooms up to 60 kV m³ using 2-4 circuits.

• The supply connection occurs through the upper crane-American No. 3, and the return is connected to the lower valve.
• The pump should work towards the mixing valve under number 2.
• The valve itself is installed by the sign "plus" towards the feed from the boiler.
• The contours for the warm floor are attached to the collectors (12).

The final auto-regulating scheme can be used for a warm floor system with up to 150 kV of area and 3–12 contours.

• 1 mixing node Combimix (VT.COMBI.0.180);
• 1 collector group assembly for the required number of outputs (VTC.594/VTC.596);
• circular pump 180 mm;
• 2 fitting (for each outline) VT.4420.Ne.16 standard "Euroconus" for connecting metal -plastic pipes.

The circulation of the coolant in such a collector is shown in the figure. The feed is connected to the upper output, the return to the lower. The operation of the pump is directed down, so the lower manifold becomes a feed for the contours of the warm floor (orange in the photo), and the upper goes to the return (blue).
Collective cabinet
A collector for a water warm floor is usually installed in a collector cabinet. They are both internal and external. Their standard depth is 12 cm, so not every node can fit, especially if large thermal attires are installed. In this case, it is better to choose an internal cabinet, the depth of which is increased due to deepening the rear wall.

Is it safe to install laminate flooring over a heated floor? Can it be heated without the need for radiators? the methodology of appropriate styling, substrate selection, and expert advice.

Guidelines for DIY at Trastentining. Pricing, scheme and styling technology, and computations.

Warm floor + radiators scheme. Will the scheme work?

Wrote Dmitrieff.Dmitriev2015. WHAT IS WITHOUT means that the warm floor won’t function and only radiators will be heated.

Thus, it shall be. A mixture-pump-collector module is required by TP. Yes, as well as the radiators in question operating normally.

In order for a two-pipe system to function properly, a hydraulic calculation must be made. Furthermore, you can repeat the poke method ten times without getting a satisfactory outcome.

You can reach out to the website mentioned in my profile for more information and links.

Calculating heating systems hydraulically. Assessing the amount of insulation in homes and apartments by measuring heat.

Wrote Dmitrieff.Dmitriev2015. They offer to run feed and return polypropylene pipes along the foundation in a layer of sand beneath the screed.

Poor resolution. Which scenario makes every floor all the way down hack a jaw? severing the warm floor’s pipes? They even want this to be avoided by enemies.

In the clutsy layer, if you’ve already hidden. Or beneath the final coating in a ditch in a final screed.

This is an EPPS option:

Furthermore, the ground floor’s very helpful solution—the floors themselves—is incorrect.

Wrote Dmitrieff.Dmitriev2015. WHO WILL NOT USE THE PIPE?

The likelihood is so great.

Wrote Dmitrieff.Dmitriev2015. Is it not the case that the heat passes through the pipes buried in the sand beneath the screed?

Of course it will be. There is not perfect thermal insulation.

Written by Kranoff. The pump mixture node, which lowers the coolant’s temperature while also ensuring adequate circulation, connects the heated floor to the heating system. Thermostats are installed throughout the property, and they use servo drives to regulate the coolant supply according to the contours of the warm floor through valves on the collectors.

This is of course perfect option. But far from the only.
Of course I do not presume to assert 100%, but the proposed system will work. And the pump will push both radiators, etc., but. In this case, the floors will turn out to be adherent and there will be no talk of any comfort. It is possible to apply the type of such to adjust the contours to adjust the contours. But for 5 small circuits at a price will be very "curly". At the cost is already approaching the normal collector system.
If you really want cheap and angrily, then you can install at least a valve with thermal heads on the circulation of contours. You can see a little more about a similar method of regulation.

Wrote Dmitrieff.Dmitriev2015. They offer to run feed and return polypropylene pipes along the foundation in a layer of sand beneath the screed. Are the pipes going to freeze? Will the pipes placed in the sand beneath the screed be able to conduct heat?

It is highly probable that they will, and even with the relatively small heat transfer of PP, they will warm this layer of sand more than the house. While manufacturers are permitted to be monogged, it is preferable to be a screed solely in the insulation to allow for freedom.

Heating radiators or warm floor

One of the most crucial components of any home is the heating system. It can be produced with entirely different tools and technology. When working alone, you must understand which components to purchase, how much to buy, and how to heat the space as efficiently and effectively as possible. It should also be dependable so that ongoing maintenance is avoided. The equipment should be reasonably priced for the intended user.

The main nuances of heating pads

Because main gas is inexpensive and readily available, it is the most widely used method of heating buildings. In a private residence, using a gas boiler to create autonomous heating is also permitted.

Solid fuel boilers are suited if your home is gas-powered. which run on firewood or coal.

Not only is using standard heating—which requires placing the battery under the window—a great solution for any kind of home, but it can also be combined with a heated floor. In this instance, the room is guaranteed to be heated uniformly.

After all, the warmth from the floor creates the ideal environment for life. Every user will find such a combined heating system enjoyable, and it is simple to construct. Although the battery is warming up, it is still necessary to warm it up initially because people walk on the floor.

However, it is obviously deemed inappropriate to remove the radiators themselves, as it is precisely because of them that the room’s heating is guaranteed to be prompt, even, and efficient. As a result, installing heating radiators in addition to warm flooring is ideal.

Setting the temperature independently is possible when creating an autonomous heating system. and select the pipeline’s pressure as well. As a result, the system will never experience a temperature issue or other issues.

Selecting the appropriate tools for the job is crucial for a professional and high-quality connection. Batteries, pipes themselves, and a suitable boiler that can run on various fuel types are all necessary for heating water. The finest element Before:

• Create a connection project. To take into account all possible nuances and problems of this work, and the scheme must be constantly applied during the work itself;
• If the heating radiators are located in the floor, then it is important choose the right floor coverings. which can withstand the effects of high temperature;
• intra -sex radiators must have optimal dimensions and high reliability. so that there are no leaks or other problems under the floor.

System design

Any system that is created before should be accurately and precisely designed, particularly if you are going to be installing it yourself. The best options are the designs listed below:

• A gas boiler To form a water heating system, plus a warm floor. To create it, you need the presence of the boiler itself and intra -floor elements for heating the floor. The equipment laying scheme is considered quite complicated, but the resulting system will be energy -dependent.
• Solid fuel boiler and water warm floor. Such a scheme proposes the ability to use both forced circulation of the coolant and natural. This combined system is more simple to operate.

Features of the creation of a system using a gas boiler

There shouldn’t be any unique issues when selecting the boiler. To guarantee efficient and superior heating, the equipment’s suitability for a particular room is the only requirement. If there are multiple rooms, they need to warm up uniformly. Not overly costly and sophisticated equipment is selected for a single room.

The selection of additional system components:

• Pipes. It is best to choose polypropylene pipes for the house, but it is best to install radiators built into the floor from stitched polyethylene. This is due to the fact that polypropylene is inexpensive and flexible material. Its installation is a simple work. Warm floor is considered optimal when using stitched polyethylene. In this case, the internal structures will be durable, reliable and durable.
• Batteries. Aluminum batteries with a suitable number of sections are considered the best choice. They are located in rooms under each window. They are needed in a certain amount to ensure effective heating. If a small number of radiators are chosen, then they will not be able to cope with the tasks. If there are too many of them, then the coolant will be irrationally used. Aluminum batteries are considered more economical than other options. They have an acceptable cost, good heat transfer and good strength.
• Controversial reinforcement. It includes thermostatic heads that are connected to radiators. Cutting valves should also be used.

How heating is carried out

Understanding how the heating system operates with two contours to attain the desired temperature for each circuit independently is crucial. This is because, although extremely hot water is required for standard radiators, excessive heat can harm intra-floor components.

The connection between two distinct contours that is deemed most optimal is the most optimal. However, the use of a unique hydraulic shotgun that produces two distinct contours independently of one another has increased recently.

If there are already all the necessary elements for work, then the work itself begins.
The permanent circulation of the coolant is ensured along the small circuit, crossing the hydraulic boost. The return always provides a rather low temperature, which is considered necessary for the optimal functioning of the condensation heat exchanger. As soon as the radiators begin to cool, a circulation pump begins to start for each of the contours. Due to the presence of a hydraulic shootout, the water does not go into the warm floor not too high temperature. If you turn off the pump, you can stop any outline. Such a system is considered quite effective and acceptable for optimal heating of various rooms.

Nuances of the use of a solid fuel boiler

It is best to select a solid fuel boiler if gas cannot be used for heating. Here, too, a few components are required for the system to function, and these are as follows:

• Pipes. Standard polypropylene products are also needed here.
• Radiators. Aluminum constructions are considered the best choice, in which there are the right number of sections. If there is money, then more expensive elements can be purchased. Before laying a warm floor, it is important to know what floor coverings are made of, since they should be suitable for installing this equipment.

The setting up of apparatus is essentially the same as the creation of any enclosed gravitational system. One pipe or two pipes can be used in the system. The installation of a unique locking reinforcement is crucial because it will control heat transfer and guarantee structural balance. Between the supply pipeline and the reverse, which can fully overlap with reinforcement, is a heat accumulator installed.

Component	Description
Warm Floor	A system of heating cables or pipes installed beneath the floor surface to radiate heat upward, providing even warmth throughout the room.
Radiators	Metal devices attached to walls that use hot water from a central heating system to warm the air in a room. They often provide quick and adjustable heat.

Warm floor heating in conjunction with conventional radiators provides a flexible and effective way to heat your house. With the flexibility and rapid warmth of radiators combined with the comfort and even heat distribution of a warm floor system, this hybrid approach offers the best of both worlds.

This heating scheme’s ability to effectively heat different parts of your home based on your needs is one of its main advantages. Radiators are great at quickly delivering heat where and when it’s most needed, and warm floors are great for keeping a room at a constant temperature. Because of this flexibility, you can tailor your heating plan to suit your needs and the needs of your room, the time of day, and your preferences.

Furthermore, using radiators in conjunction with warm floor heating can save energy and reduce utility costs. Warm floors use less energy and produce less heat loss because they run at lower temperatures than conventional heating systems. Radiators, on the other hand, add extra heat as needed to ensure maximum comfort without using extra energy.

This heating scheme also has the benefit of being compatible with different types of flooring and home designs. Warm floor systems can be installed under a variety of flooring types, such as tile, laminate, and hardwood, and they will blend in beautifully with the design of your house. Radiators, on the other hand, are available in a range of sizes and designs to accommodate various room sizes and decor styles.

In summary, warm floor heating in conjunction with radiators provides a flexible, effective, and individualized approach to home heating. You can get the best possible comfort, energy savings, and flexibility in controlling the temperature inside your home by combining the advantages of both systems. For a comfortable and effective living environment, this hybrid heating system is something to think about when building a new home or remodeling an old one.

Video on the topic

14-pounding, warm floor and radiators

Warm floor and radiators. Why do not work together

3D heating scheme warm floor + radiators

Warm floor and 2 floors of radiators, how to do without a hydraulic region?

Heating without an expensive hydraulic shooting range is real! And how to connect a warm floor?