Fixing toilet to the floor: analysis of 3 “correct” technological methods

There are various techniques for securing a toilet to the floor so that it remains securely in position. Installing a secure toilet is crucial for your home’s functionality and safety. This post will examine three popular techniques for mounting a toilet to the ground, emphasizing both their practicality and the underlying technology.

It takes more than just connecting pipes to install a toilet. Making sure the toilet is firmly fixed to the floor is essential to avoid any swaying or possible leaks. A correctly fixed toilet not only improves the look of your bathroom overall but also shields it from future costly maintenance problems and water damage.

We’ll look at three common methods that pros use to firmly anchor toilets to the ground. You’ll be better able to select the technique that best meets your needs and guarantees a sturdy and long-lasting toilet installation if you are aware of the advantages and disadvantages of each method.

Method Description
Bolted to Floor The toilet is secured to the floor using bolts and a wax ring. This is the most common and traditional method.
Anchor Flange An anchor flange is used to secure the toilet to the floor. This method provides extra stability and is suitable for uneven floors.
Expansion Bolts Expansion bolts are inserted into the floor, expanding to grip the surrounding material. This method is useful for concrete or tiled floors.

Method No. 1: Dubel installation

The most sensible technique that saves you time and effort when installing the device. Ideal for use on a smooth, even base because even tiny height drops degrade the flush’s quality. For lightweight, compact structures, this fastening method is preferred as fixation may not be entirely dependable. It is recommended that plumbers install equipment on a special gasket, which is easily made from a thin rubber sheet or the old linoleum on its own. After installing the toilet on the workpiece, the contour is marked with a marker. Next, cut the gasket into the required shape using a sharp knife or even just scissors.

You can use dowels or specialty plumbing fasteners to secure the device to the floor. New equipment typically comes with fasteners. Additionally, it is sold in specialty stores.

Now you need to mark. For the prepared place for equipment, we “try on” the toilet and circle it along the contour. We remove the device. We put a thin layer of sealant and glue the gasket on it. This design will be the most reliable, although some masters prefer to do without a substrate at all. You can start drilling holes for fasteners. As practice shows, if you stick the gasket with a qualitatively and select the diameter of the drill so that the holes for the fasteners are slightly larger than it, then the further installation will be much easier. This is due to the fact that the rubber substrate acts as a kind of “contact spot” for the floor and device.

It so happens that raising the toilet a little bit is necessary in addition to fixing it to the floor. This is important if the apartment contains multiple devices. Subsequently, the latter in the system must be elevated by approximately 3–4 cm. In this instance, a two-inch board section is utilized as a stand. It is precisely cut to fit the toilet’s circuit and placed on the ground, covered by a rubber substrate. All of this is sealed with adhesive, creating a sturdy and dependable design. We immediately drill holes in the gasket for fastening.

Adjust the mounting on the toilet’s foundation. If you put in too much effort, the ceramic used to make the device could get damaged.

Mounting options include long metal dowels and specialty plumbing mounts. The latter typically arrive fully equipped with new machinery. Because of their nearly equal fixing quality, you can use both choices. We score dowels in the floor that has been prepared. Carefully screw in the toilet after installation. It is important to keep in mind that the device can sustain damage if it is made of ceramics with excessively strong tightening properties.

The device must now be connected to the sewer. We focus especially on the corrugation at this point. Make sure to liberally lubricate both of its edges with silicone. We place one of them in the sewage bell and the other one in the toilet release. To ensure excellent sealing, press your fingers all the way through each section of the connection. You can use metallized tape to seal the joints as an extra precaution. The device is operational as soon as the water supply is connected. A detailed presentation of this fastening method is provided in the video.

Method No. 2: Mounting on glue

This is the easiest method of fixing the toilet to the floor, but it also requires the most time and money. The epoxy mixture, which is used as glue, needs to harden for 12 to 15 hours. This technique is limited to smooth surfaces. It is most frequently used to attach equipment to floor tiles. It’s very simple to follow the method. The glued surfaces must first be thoroughly cleared of dust and debris. It is possible to clean the floor tiles to make them rougher. This will increase the material’s adhesion. Acetone or any other solvent deteriorates surfaces.

Cooking adhesive. You have the option to make your own epoxy composition or purchase it already made. Use 100 parts EP-6 epoxy resin, 200 parts cement, 20 parts plasticizer or solvent, and 35 parts hardener to accomplish this. It matters which components are added to the solution in what order. Prior to adding the solvent, hardener, and cement at the very end, the resin must first be heated to 50C. It takes continuous interference with the composition to form a plastic, homogenous mass.

The flooring is ready for the toilet to be firmly fixed in place. It is cleaned to improve adhesion and lubricated with a thin layer of glue. Using a moist rag, remove any excess compositions that were performed while the equipment was heavy right away.

Corrected adhesive mixture can be used within an hour and a half. We apply it to the base of the toilet so that the solution covers an area of at least 20 kV. cm, and the thickness of the layer was at least 4 mm. We install the prepared equipment in the desired place, combining the sewage bell with the release, and with the effort we press it to the floor. After which we leave the device for at least 12 hours. This period is necessary for hardening of the adhesive. During this time, it is not recommended to even touch the toilet. Then we connect the equipment to the water supply and sewage.

For both functionality and safety, make sure your toilet is firmly fastened to the ground. Three popular techniques for mounting a toilet to the floor have been covered in this article; each has pros and cons of its own.

The first technique we talked about is using a wax ring and toilet flange bolts. This approach is well-liked by many homeowners since it is easy to use and reasonably priced. Nevertheless, it might take a little more work to guarantee a good seal and stop leaks.

The second technique uses a wax ring and toilet flange screws. This technique is a good choice for heavier toilets or bathrooms with heavy traffic because it offers more stability than flange bolts. It might, however, take more time and effort to install.

Lastly, we looked into a third technique for attaching a toilet to the floor: toilet flange adhesive. This technique may not offer the same level of stability as conventional techniques, even though it does away with the need for bolts or screws. It can also be harder to remove the toilet using this method in order to replace or repair it.

The optimal technique for attaching your toilet to the floor will ultimately rely on your unique requirements and preferences. To guarantee a safe and leak-free connection, it’s crucial to adhere to the recommended installation techniques, regardless of whether you decide to use adhesive, screws, or flange bolts. Seek advice from a qualified plumber if you’re not sure which approach is best for you.

We’ll look at three practical ways to secure a toilet to the floor in this article. For your toilet to be stable and last a long time, you must properly secure it. We’ll walk through each step of the procedure, going over how to use flanges, bolts, and wax rings, and sharing the benefits and drawbacks of each approach. Knowing these methods will provide you peace of mind for years to come by guaranteeing a strong and leak-free connection between your toilet and the floor, whether you’re installing a new toilet or replacing an old one.

Video on the topic

How to fix the toilet to the floor | A simple way!

Installation of the toilet on silicone

Light mount for the side of the side (hidden installation), how to fix the toilet to the floor?

How to connect a toilet cuff correctly

What type of heating you would like to have in your home?
Share to friends
Michael Kuznetsov

I love to create beauty and comfort with my own hands. In my articles I share tips on warming the house and repairing with my own hands.

Rate author
Add a comment