Cover the house with corrugated steel with your own hands video

Are you looking to improve the durability and insulation of your home while also updating its exterior? Perhaps corrugated steel siding is the answer you’ve been looking for. The advantages of covering your home with corrugated steel will be discussed in this post, and even better, with the help of instructional videos, we’ll demonstrate how to do it yourself. Corrugated steel offers both style and functionality, whether you’re going for a modern industrial look or just need a useful and affordable way to shield your house from the weather.

Because of its strength and adaptability, corrugated steel siding has become more and more popular in recent years. Corrugated steel is a low-maintenance alternative for homeowners because it is extremely resistant to rot, fire, and pests, unlike conventional siding materials like wood or vinyl. Its corrugated design also increases stiffness and strength, guaranteeing long-term durability even in inclement weather.

In addition to being highly durable, corrugated steel siding has superior thermal insulation qualities that lower energy expenses and help control indoor temperature. A good way to prevent heat gain in the summer and loss in the winter is to install corrugated steel panels on the outside of your house. By lowering your carbon footprint, this not only makes your living area more comfortable but also supports environmental sustainability.

I know what you’re thinking: "Is it possible for me to install corrugated steel siding on my own?" Yes, is the response! The availability of comprehensive tutorials and step-by-step videos on the internet has made DIY installation easier than ever. We’ll give you insightful advice and pointers on how to handle the installation process like a pro in the sections that follow. You’ll find all the information you need to start this fulfilling home improvement project, whether you’re an experienced do-it-yourself enthusiast or a first-time homeowner eager to learn.

How to properly clad the house with your own hands

When installing a product on a wooden surface, it’s crucial to keep in mind that the wood needs to be treated with specific solutions before any work is done. Failure to do so could result in the appearance of mold, fungus, and bark beetles on the surface, which could cause the wood to rot and decompose.

Both the upper layer of corrugated sheeting and the wooden structure will sustain damage if the rotting process continues beneath the cladding. Manual inspection involves walking through the house and looking over each and every detail.

The surface’s corrugation will show evidence of a timber house that the bark beetle visited, and black spots will suggest the presence of fungus. After removing the damaged areas, carefully fill in all the gaps and cracks with plaster.

The owner is fortunate if the walls have not deteriorated because then work on the structure’s framework can start. Purlins can be constructed in a horizontal or vertical orientation.

Because there is insufficient ventilation permeating the surface of the house, cross beams are not permitted.

There are various steps involved in installing corrugated sheet on the exterior of the walls:

  1. The surface of the wall is covered by drawing lines arranged vertically. The distance between them should not be more than sixty centimeters.
  2. Steel brackets are attached to the surface of the wall for leveling.

Self-tapping screws are used to mount the brackets, and it is assumed that every bracket will be positioned on the same line.

The U-shaped profiles are fastened to the brackets that have been installed.

A water level is applied to the profiles to guarantee that they were installed precisely in a vertical plane.

The resulting spaces between the profiles are filled with insulating materials.

Mineral wool boards are used most frequently. To accomplish installation without the need for additional fasteners, boards should be tightly fitted against the wall’s surface.

A vapor barrier film must be attached after the heat-insulating material is installed in order to stop condensation from forming on the profile sheet’s inner surface and to stop wet drops from landing on the insulating material’s surface.

You are now ready to begin installing corrugated sheeting.

Self-tapping screws with round washers on the end are required for this purpose. The task of attaching the material to the wall will be completed with their assistance. To account for thermal expansion, when screwing self-tapping screws, leave a space between the corrugated sheet’s surface and the flat.

The first sheet is fastened from the bottom of the building. The sheet following the first one and the subsequent ones are installed overlapping. This method will ensure reliability and prevent moisture from getting under the cladding.
If we clad with imitation, the work will be delayed, and this is due to the fact that the master will be difficult to fit the material. Therefore, the facade cladding is recommended to be made of profiled sheet under the log or wooden surface.
It is important to keep an eye on the accuracy of the pattern on the surface. It should not have gaps. Such a composition is laid across, not along the structure, and with a mandatory overlap.
After attaching the profile sheet to the wall, you need to hide the gaps at the joints of the surface with the help of additional materials.

The article about building a garage out of metal profiles by hand might be of interest to you.

The installation process consists of these steps. A novice master and a few assistants from his friends or housemates can manage it.

When drawing corners and lines, craftsmen should adhere to a level and use a screwdriver with precision.

In the video, you will learn how to install corrugated board to cover the outside of your house:

Features of the material

Corrugated board possesses all the qualities of this material because it is a metal product. It is, in actuality, a thin-sheet steel product. Despite being corrugated sheet and having a thin thickness, its profiled surface gives it exceptional strength. The material under operation can exhibit increased rigidity because of the trapezoidal waves that are present on the sheet’s surface and are utilized as stiffeners in this instance.

The product under consideration is composed of stainless steel because metal is prone to corrosion, which can have detrimental effects on the environment when it manifests itself. On the front side of the material, there is an extra layer of protection in the form of a polymer coating. It is notable that this coating enhances the aesthetic qualities of corrugated board in addition to providing protection from the elements. Its ability to be made in any color variation gives it this opportunity.

Advantages

The following should be the primary benefits of corrugated board that have guaranteed its widespread use:

  • affordable price;
  • the possibility of use for cladding even a wooden house;
  • A wide range of color options of polymer coating gives confidence that any owner will be able to find among the variety of proposed materials that will suit him in color and style of design;
  • Significant area of corrugated steel sheets noticeably reduces the time required for its installation, and this makes it a more preferable option than the facade cladding siding or facing brick;
  • cladding of the facade with corrugated board provides a high level of protection from mechanical damage and atmospheric moisture;
  • polymer layer, which have galvanized steel sheets, protects them from corrosion. But demonstrate this property material can only if during its laying will be properly carried out processing cuts.

Disadvantages

However, there are a number of drawbacks to corrugated board that buyers should be aware of. The lowest noise absorption coefficient is the most important of them.

You are familiar with the sound of raindrops hitting eaves if you have ever been inside a building during a downpour. What can be said about the corrugated sheeting-lining facade?

What is corrugated board

Producing profiled sheets is a fairly straightforward process. Galvanized sheet, which ranges in thickness from 0.35 to 1.2 mm, is the raw material. Cold rolling is the technology used in profile formation. In other words, a steel sheet coil is unwound by passing its end through a rolling mill. The rollers in the equipment system come in various sizes. They are set out in order. Additionally, their diameter increases with distance.

Rolling the sheet between rollers is the result. On it, profiles can be acquired. And rolling continues in this manner until the corrugated sheet wave reaches the necessary specifications. The sheet is then cut using a specialized machine. The sheet’s maximum length is 13 meters, and its minimum is 0.5 meters. With a 0.5 meter step, the trim can be adjusted to any size.

The corrugated board production technology

Although galvanized panels are still available in the market, corrugated sheeting has evolved to include more options. These are long-lasting sheets that have been painted or treated with polymer. Paint is eventually abandoned by manufacturers because materials with polymer layers perform better. For instance, a painted sheet can only withstand 15 years, but a polymer application can endure up to 50 years. It should be mentioned that polymerization and painting are not applied to the finished corrugated board. This raw material is already completed and is shipped from the factory as rolls of sheet. In other words, it is painted or polymerized using specialized equipment in a factory setting.

Corrugated board: State standard 24045-2010 was developed specifically for this material. Although not all manufacturers follow this document and make their products in accordance with technical specifications (TU), it should be noted that this does not conflict with the laws as they stand at the moment.

Trapezoidal wave-patterned corrugated board

Consequently, three groups are identified on the GOST profiled sheets that are provided:

  • wall;
  • bearing;
  • roofing.

Since the corrugated board siding on houses is the article’s main topic, we will be primarily interested in the wall variant. It should be mentioned, though, that the other two can also be utilized to adorn a home’s wall. There’s just no use for them because they are more expensive.

As a result, wall corrugated board is labeled with the letter "C" and includes digital sheet parameters, the primary one being wave height. This size varies from 8 to 44 cm in the wall. The material’s strength properties are determined by the profile’s height. It is more durable the larger it is.

Most frequently, corrugated sheet of brand C-8 is used to finish houses. It is, first of all, the least expensive choice. Its strength characteristics are excellent. But the loads acting on the building must be considered when selecting a grade. For instance, it is preferable to clad a building with C-15 (20 or 21) sheets if the wind loads acting upon it are high. They are also nearly impervious to bending and have a higher strength.

C-8 profiled sheet You can learn more about the most well-liked locations in the Moscow area for building a country home by visiting our website. You can adjust the desired direction, as well as the presence of water, gas, electricity, and other communications, in the filters.

And exactly a few words regarding the profiled sheets’ ornamental design. Let’s begin with the reality that manufacturers currently provide nearly the whole color spectrum. However, experts assert that we are already in the last century. because panels embellished with various building materials—wood, brick, stone, sand, and so forth—are sold at the market. In addition, you have the option to add various designs to the sheet material, such as patterns, drawings, landscapes, and nature.

And just one more thing. Corrugated sheeting with a double-sided decorative coating is now available from manufacturers. In other words, both sides of the sheets are embellished. Usually, they are utilized to construct fences. For the cladding of houses, single-sided panels are the best option. They are less expensive, and using double-sided sheets in this case is unnecessary.

The house’s facade is made of profiled sheet imitating natural stone.

Technology of cladding the house with profiled sheets

Observe right away that the corrugated board finishing of the house involves building a ventilated facade. That is, install a metal profile frame on the building’s exterior walls. Additionally, it has the profiled sheets mounted on it. The metal profiles on the house’s facade are either unique components or profiles that are used to install sheets of gypsum plasterboard.

Let’s not forget that the ventilated facade provides a chance to insulating the house’s walls from the exterior. In other words, a layer of thermal insulation is placed between the building’s walls and cladding. The construction is truly superb. As they say, it’s a two-for-one deal: decorative paneling and thermal insulation.

Calculation of the required material

The quantity of corrugated board needed must be precisely calculated in order to avoid going over budget. To achieve this, deduct the area of the window and door openings from the wall’s total area, which is equal to the height times the width. If the gables are going to be covered with profiled sheets, you can add the area of them here.

How to determine the wall’s area

Finding the usable area of the profiled panels you buy is now essential.

Keep in mind that every sheet has two widths: its total width and its useful width. The area is determined using the latter. Now that the entire area that needs to be covered has been divided by the area of a single sheet, the necessary number of panels can be found.

The following extra components are now produced by manufacturers in addition to corrugated board. Few of them exist:

  • external corner to decorate the outer corner of the house;
  • inner corner;
  • butt strip, with which to close the joints formed between two neighboring sheets laid in the same direction;
  • end and slope strips;
  • window molding;
  • plinth strips.

Every trim choice is made in consideration of the house’s measurements and structural components.

Wall preparation

To begin with, everything that is attached to the wall surfaces is taken out, including lamps, sills, drainage systems, and platbands. Next, make the necessary repairs. While it is not required to level the surface, it is important to repair any cracks, holes, chips, or notches and to keep the area free of mold and fungus.

If a wooden house is finished with corrugated sheeting, all of the wooden surfaces must first be treated with an antiseptic composition to prevent mold and fungus, and then fire retardant after it dries. The latter makes wood more fire resistant.

How to make the fixing of corrugated sheeting

The process of installing profiled sheet involves fixing it to the frame.

Using a rubber gasket and galvanized self-tapping screws, the corrugation is secured in increments of 35 centimeters. Corrugated board self-tapping screws feature a thread and a unique drill bit-shaped tip. Typically, they are composed of zinc-finished, high-strength alloyed carbon steel, grade C1022. Self-drilling screws with this tip enable you to fasten them to the frame without drilling holes beforehand.

Thus, 4.8 mm diameter self-drilling screws for corrugated board can drill through 2.5 mm thick metal.

Rubberized gaskets keep moisture out of the construction material’s cavities.

There should always be a 5 cm overlap when laying the sheets. The burr is removed when cutting metal to prevent self-cuts.

There are fixed extra elements at every corner, door, and window around the house’s perimeter. After that, the building has a polished and finished look.

Take note! Nails and punches are not permitted.

Using self-tapping screws to secure corrugated board

Advantages of facade finishing corrugated board

Naturally, you can use any kind of material that is appropriate for this use as cladding. But in this instance, corrugated board offers a lot of indisputable benefits.

Features of corrugated board facing

  1. Corrugated board is an economical building material. You will save not only on the material itself, but also on installation work, if you want to use the services of professional builders.
  2. Durable construction. Provided that the corrugated sheeting is properly installed, it will last long enough, without requiring additional maintenance or repair. The service life of this building material is not less than 50 years.
  3. Profiled sheets are quite resistant to corrosion, they are not affected by negative external factors such as scorching sun, precipitation or low temperatures.
  4. The building material is absolutely fire safe.
  5. Attractiveness. If the corrugated board is installed correctly, and even choose a building material of unusual color, it will carry not only practical, but also aesthetic functions.
  6. Simplicity of installation. This is an undoubted advantage that distinguishes corrugated board among other materials. The work will be completed in the shortest possible time, auxiliary building materials are simple and inexpensive.

3 How to install corrugated sheeting on the wall

Profiled products can be fastened using one of two methods:

  • to the existing wall;
  • to the wall, which is a prefabricated construction.

Furthermore, there is a chance that the corrugated board will function as a wall in its own right, fulfilling all the duties that come with it as a structural component. In this instance, product installation is fairly easy and follows the plan for installing the corrugated sheet fence.

When there’s a specific object (like a private residence), where a person will be mounting profiled products on the walls, we’re more interested in the first two methods—especially the first one. The following is how this installation is completed:

  1. A framework (base) of metal components is fixed to the wall (it is also allowed to use wooden laths, but the quality of the construction will deteriorate). The above frame is mounted on the wall by means of dowels. Installation is performed with the use of levels (there should not be any distortions). On the prepared base fasten vertically or horizontally profiled sheets. Particularly creative homeowners even orient the products diagonally, thereby creating a unique look for their home. Here we note at once that the orientation of corrugated board in no way affects its characteristics during operation.
  2. Using dowels of the disc type, install the insulation layer (if provided by the project). It is necessarily required to protect it from water by carefully covering it with a moisture-proof film.
  3. Fastening of corrugated sheeting to the wall is carried out. For this purpose, self-tapping screws made of galvanized steel are used. These fasteners are equipped with special gaskets to protect the joints from moisture.
  4. Install the prepared trim parts.

The frame, which was discussed previously, is a U-shaped steel guide profile. The installation of the vertical components of this construction comes first. The brackets are fixed to the pre-mounted frames. There are horizontal lintels positioned in between the vertical profiles. Once you have this base ready, you can safely move on to the next steps of installing the profiled sheet on the wall.

The second installation method from the beginning of this section—attaching profiled products to the prefabricated wall structure—occurs most frequently in frame construction, where the wall’s foundation is a metal profile. In this instance, a double layer of roofing felt is applied to the upper portion of the foundation to waterproof it first. Next comes the installation of the metal profile on the foundation and the posting of the voiced profile (self-tapping screws of the universal type are used as fasteners).

These easy steps provide us with a panelized frame for the structure. The vapor barrier and insulation material were placed on its inside. It is necessary to cover the insulating layer with a polyethylene film. The corrugated sheet wall’s foundation is ready to go. You can move on to the installation steps that were briefly discussed previously.

Learn how to turn your house into a sturdy, weatherproof haven by following the step-by-step instructions in this video guide on covering your house with corrugated steel. From assembling the supplies to fastening the steel panels in position, we’ll guide you through the entire process and offer helpful hints and advice as we go. Regardless of your desire to improve the visual appeal or weatherproofing of your house, this do-it-yourself project provides an affordable option that you can confidently take on. You’ll be prepared to tackle this satisfying project and take pleasure in the long-term advantages of a well-insulated and aesthetically pleasing home with easy-to-follow instructions and visual demonstrations.

Advantages of profile decking

A dependable paint finish covers a sheet of galvanized steel to create profiled decking. It may take on a different shape. There are sheets that have trapezoidal and rectangular lines, as well as coatings that mimic real tiles. The designer’s creativity and the builders’ requirements are the only limitations on color.

The corrugated boarding covering the house gives it a stunning appearance while also greatly improving its functional qualities. The sheets range in thickness from 0.3 to 1 millimeter, and the material and purpose of the wave determine its height.

The following factors contribute to profiled decking’s benefits:

  • high strength and reliability;
  • beautiful appearance;
  • wide possibilities for creating various design solutions;
  • resistance to corrosion and fading due to the use of modern paint coatings;
  • cheapness.

The building is given extra insulation by having a hinged ventilated facade. For this reason, corrugated board siding is found in older buildings as well. These days, old houses are covered in this material, which gives them a fresh appearance and greatly extends their service life. The home becomes elegant, contemporary, and cozy.

Additionally, you can save a lot of money by using corrugated board to clad a wooden house. Putting this procedure on wooden walls is a very easy and convenient process.

Profiled decking is simple to install, so you can do it yourself without hiring an expensive specialist.

Selection of material for house cladding

Selecting the color of corrugated board is not the only thing to consider when purchasing it; you also need to consider the sheet thickness and wave height, which are contingent upon the coating type.

Material C8, C10, C20, or C21 is more frequently used for house cladding; the numbers indicate the height of the corrugated sheeting wave. To produce the material, 1250 millimeter-wide smooth painted sheets are utilized. The width of the metal sheets is decreased after rolling, based on the kind of corrugated board.

Corrugated board can be used to clad a house either vertically or horizontally depending on the profile. Making your own calculations for corrugated board sheets is not advised. With the use of a specialized computer program, any manager in charge of sales can quickly compute and create a schematic drawing showing where the sheets are located. All you have to do to accomplish this is take precise measurements of the house’s dimensions, making sure to account for window and door openings.

There are other factors that need to be considered in order to find a quick and effective solution to the corrugated board siding problem.

Among them are:

  • special corner elements;
  • connecting strips;
  • Starting and finishing strips;
  • window and door framing elements;
  • basement moldings.

You will need self-tapping screws, dowels, nails, hangers for the guide profiles, and galvanized metal to install the frame.

Certain components might not be necessary if you are using corrugated board to clad a wooden house. Wooden profiles are much simpler and easier to fasten.

Making the frame

Lead profiles

Install wall hangers first; a perforator can be used for this. Fix them through the isolone gaskets to lessen vibration and noise. Next, secure the hangers with the vertical guide profiles.

Horizontal crosspieces should be inserted between the vertical rails of the frame to maximize rigidity. It is only advisable to have such an event if the completed construction will be too heavy. If you have chosen to insulate the walls, apply the thermal insulation material after the frame is put in place. This could be mineral wool or foam. Cover the thermal insulation layer with a waterproof vapor-permeable film to shield it from external impact.

Install the shaped elements and trims following the frame installation, thermal sealing, and waterproofing. These consist of various connections, unique corner profiles, subterranean drains, and more.

Cladding of the house

Before lining the house with metal profile, builders consider a number of this material’s characteristics, such as:

  • preventing the impact on the walls of the building of negative factors from the outside;
  • due to the air layer guarantees timely airing and ventilation of the interprofile space, thanks to which no mold does not appear, no condensation is formed.

The layer also serves as a sort of acoustic and thermal insulation.

These characteristics enable you to clad a balcony or attic with corrugated board, transforming it into a fully functional living area that is cool in the summer and warm and comfortable in the winter. The walls and the material itself are guaranteed to be reliably protected if the air "corridor" is arranged correctly.

If you’re still unsure if you can cover your house with corrugated sheeting, there are two installation methods that experts recommend:

  • Fixing the sheets to the already prepared surface, in this case, the wall;
  • Sheet cladding of each prefabricated element of the future wall.

If the following guidelines are followed, high-quality cladding is assured:

  1. Installation of a metal frame on the wall, assembled from mounting brackets. The structure is leveled and checked on the level, then fixed with dowels. As frame elements can be used wooden laths, but still the best performance qualities have a metal frame. To clad the house with corrugated sheeting is allowed both vertical and horizontal arrangement of sheets. Some builders experiment with diagonal orientation of the material.
  2. Laying insulation, on top of which a vapor barrier film is attached.
  3. The frame is ready, and to it you can mount corrugated board, as shown in the photo. In this case, galvanized steel self-tapping screws should be used as fasteners, each of which is equipped with a moisture-proof gasket.
  4. The work is completed by installing trim elements.

Should the corrugated sheeting be covered with a quickly constructed insulated panel, the following two-layer roofing felt waterproofing of the foundation will be a crucial step to take:

  1. Fixing the guide profile to the foundation of the building with the help of anchors.
  2. On top of the profile the posts with the upper lintel are mounted – the wall frame is formed.
  3. Each cell of the frame is filled with insulation boards.
  4. The corrugated board strips are fixed to the frame from the side.
  5. Profiled sheeting is fixed on the same principle as conventional wall cladding.

The wall cladding example above demonstrates the ease of use and quickness of the task, but there are some crucial details to take into further consideration.

Many homeowners find that covering their house with corrugated steel is a doable project if they follow the video’s step-by-step instructions. The video’s visual aids make it easier to follow along and carry out the required steps by enabling a clearer understanding of the process.

The longevity of corrugated steel is one of its main advantages as a roofing material. Corrugated steel is extremely resistant to weather damage, including wind, rain, and snow, in contrast to more conventional materials like wood or vinyl siding. This translates to longer-lasting protection for your house and less upkeep.

Furthermore, corrugated steel has superior insulating qualities that aid in controlling the temperature inside your house. By lowering the need for heating and cooling, this can result in energy savings and ultimately lower utility bills.

Moreover, corrugated steel siding can improve the visual appeal of your home. You can select a style that both reflects your individual taste and blends in with the architecture of your home thanks to the wide range of colors and finishes that are available.

In conclusion, homeowners wishing to do this project themselves will find a lot of useful advice in the video tutorial on covering your house with corrugated steel. Because of its strength, ability to act as insulation, and visual appeal, corrugated steel is becoming a more popular and useful material for roofing.

Video on the topic

Corrugated board facade. Cladding the house with corrugated board. Frame house with your own hands ch13.

corrugated siding is cheap and practical.

Cladding a house with corrugated sheeting part 1

Finishing the windows of the facade metal profile

Training movie on the installation of corrugated board / © Albatross ™

Finishing the house with corrugated sheeting

Cladding the house with corrugated sheet, and making doors for the vestibule. (The project is a Finnish house. 5 series)

Installation of metal profile with their own hands – the features of which few people talk about

What type of heating you would like to have in your home?
Share to friends
Sergey Ivanov

I like to help people create comfort and comfort in their homes. I share my experience and knowledge in articles so that you can make the right choice of a heating and insulation system for your home.

Rate author
vDomTeplo.com
Add a comment