Connecting the washing machine to the water supply and sewerage with your own hands

Laundry is frequently at the top of the list of home tasks. This task can be made much easier and more convenient if you have a washing machine at home. However, connecting a washing machine to the water supply and sewerage might seem like a difficult task to people who are not familiar with home maintenance. But, you can easily handle it on your own if you have the proper guidance and a little know-how.

Comprehending the fundamental functions of a washing machine is essential for effectively integrating it with your house’s plumbing system. A washing machine basically needs two connections: one for the water supply and another for the wastewater drain. These connections guarantee that water can be added to the machine for washing and drained after the cycle is finished. Gain confidence in your ability to set up your washing machine by understanding how to connect these parts in a safe and effective manner.

Prior to beginning the installation process, make sure you have the right equipment and supplies. This usually includes any fittings or adapters needed to connect the machine to your current plumbing, as well as hoses for the water supply and drainage. Making a list of everything you already own and anything you might need to buy in advance can help you avoid wasting time and aggravation later.

You will need to find the hot and cold water valves close to your laundry area in order to connect the washing machine to the water supply. Usually, you can find these valves under a nearby sink or on the wall behind the machine. You can guarantee a safe and leak-free connection by turning off these valves and connecting the proper hoses to the matching hot and cold water connections on the washing machine’s back.

Materials Needed	Tools Needed
Washing machine hose	Adjustable wrench
Teflon tape	Screwdriver
Y-connector	Pliers
Pipe wrench

In this article, we"ll guide you through the process of connecting your washing machine to both the water supply and the sewerage system on your own. Doing this yourself can save you time and money compared to hiring a professional. First, ensure you have all the necessary tools and materials, including hoses, a wrench, and a drain hose. Next, locate the water supply valves near your washer and turn them off. Then, carefully connect the hot and cold water hoses from the machine to the corresponding valves, ensuring they"re securely tightened. For the drain, find the nearest drainpipe and attach the drain hose securely, ensuring it has a loop to prevent water from flowing back into the machine. Finally, test the connections by running a small cycle to check for leaks or issues. With a bit of patience and attention to detail, you can successfully connect your washing machine without the need for professional help.

Materials and tools for connecting to the water supply and sewerage system

The location of the unit and the accessibility of the designated objects are the primary factors that determine the materials required for installing and connecting washing machines to the water and sewer supply. Sometimes, in order to use home appliances comfortably for many years to come, it is necessary to incur knowingly higher costs.

Should there be plans to install more branches from the water mains in the hatch, an angle drill with a saw blade on concrete that is powerful enough will be required. To remove the concrete, use a hammer and a locksmith’s chisel.

To ensure leak-free long-term operation, the jointless pipe is laid in the groove. If not, it will take a lot of troubleshooting to get the pipe back to working order in the event of a leak.

A tee with a cutoff valve is typically used to connect to the water mains, and a set of wrenches or a universal adjustable wrench are used to install it in place. FUM tape or hemp seals all threaded connections.

Fixing the pipe to the wall is part of installing the external outlet; to do this, you’ll need an electric drill and concrete drills. The plastic plugs are placed into the holes that have been drilled and secured with the proper size screws.

The top cover of washing machines must be positioned horizontally with respect to the floor when being installed. To ensure accurate washing machine installation, a construction level is utilized, and support legs with screws are used for adjustment.

You will need a drain adapter with a 45-degree angle outlet in order to install a washing machine drain into the sewer system.

A diffusion circuit breaker for 16 amperes with a leakage current of no more than 30 milliamperes and a three-core cable with a cross-section of 2.5 squares in double insulation are required in order to connect washing machines to electricity.

Furthermore, a voltmeter is one piece of control equipment that can be used. We’ll go into more detail below on how to connect the washing machine to the power grid correctly.

Preparing the washing appliance for installation

The unit must first be unpacked when it is delivered to the installation location. The machine is typically wrapped with plastic tape and placed inside a cardboard box. It needs to be chopped off.

The foam pads are then carefully removed from the top and sides of the cardboard box, along with the box itself. Next, the machine needs to be lifted in order to remove the lower foam platform.

It is important to pay attention to how it is designed. If the device’s drum rests in the transport position without a designated trough in the middle, it is manufactured and installed independently. To remove this insert, the machine must be tilted.

Please be aware that for the duration of the warranty, the foam pads and cardboard packaging must be kept. In the unlikely event that a defect necessitates replacing the machine, this procedure cannot be carried out without the packaging. These are the warranty’s terms and conditions.

Technical documentation is contained in an envelope or folder inside the cardboard package. It includes:

1. Passport for the purchased washing machine with the personal number of the machine and other credentials. All entries in it must be certified by the stamp of the store.
2. Warranty card, which is certified by the stamp of the store with the date of sale, because the warranty period starts from it.
3. Operating instructions, starting from the moment of unpacking and indicating the installation procedure.

It is imperative to adhere to all manufacturer requirements without exception, as noncompliance will result in the warranty obligations being refused.

The purchased washing machine’s accessories are also included in the packaging. Typically, they consist of:

• A flexible filler hose equipped with coupling plastic nuts for connection to the machine and the water supply;
• a drain hose for removing used water after washing and spinning the laundry;
• Reduction – an intermediate part for connecting the drain hose to the sewer pipe;
• a bracket for fixing the drain hose to the wall;
• wrench for removing the transportation screws and adjusting the position of the appliance in space before turning on;
• Plugs placed on the holes for the transportation screws after they have been removed.

These are the primary components of the sales kit; specific components may differ amongst models.

You can physically connect the washing machine’s motor to the 220 V network if it breaks.

Removing the transportation screws

Prior to the washing machines being connected to the water and sewage systems, this procedure is required. They serve to secure the drum during transit in order to prevent damage to it.

The tool needed to remove the screws is part of the sales kit, as was previously mentioned.

Never discard the removed screws; they will come in handy if you need to move the washing machine to the warranty shop. The covers from the sales kit need to be used to seal the holes left by the transportation screws.

Location options for washing appliances

These kinds of household appliances are not bought on impulse; instead, careful planning and research are done before making the purchase. This first pertains to the installation location.

The placement of washing machines as close to the sewerage system layout as feasible is dictated by the requirement to empty used water.

These outlets are found in the kitchen or in the restroom. There are the water mains as well.

Regarding the electrical link, washing machines might need a different power supply line to run from the inlet panel to the outlet location.

Connecting washing machines to the water supply – several ways of connection

See the video to learn how to install a plumbing connection by a plumber.

A hose for connecting to cold water is always included in the sales kit for this type of device. With two plastic union nuts on either end, the hose has a length of 1.2 to 1.5 meters.

One end is positioned at a straight angle on the hose. It needs to be installed at the machine’s inlet. The installation angle keeps the hose from being crimped or pinched. The following sequence is used to make the connection:

1. Disconnect the water supply to the water mains by closing the tap on the riser pipe.
2. Unscrew the flexible cold water inlet on the sink or basin.
3. Install the tee on the supply pipe in the plumbing system in such a way that the side outlet is located conveniently for connecting the washing machine hose.
4. Screw the fill hose to the tee fitting. When tightening the plastic nut, no tools should be used, and the nut should be screwed in to the stop only by hand. Tool installation often results in the failure of the flimsy plastic nut.
5. Install the flexible hose of the mixer.

After making sure there are no leaks and testing the water supply to the system with the washing machine with the tap closed on the cross, the tap can be opened to examine the stability of the hose connection.

When the unit’s installation location and the location of the sink or basin line up, this connection option is utilized.

A spare plumbing pipe is run to the washing machine installation location, where it is connected in the manner previously mentioned.

Typically, the accumulation of household appliances occurs gradually; eventually, a tangle of different hoses and tees fills the area beneath the sink or sink.

A manifold with multiple outlets installed on the cut-in pipe allows for this possibility. Plugged-in outlets that are not in use can be kept closed until they are needed.

Connecting washing machines to the sewer – consider 2 methods

Watch the video to see the original technique for hooking up a drain to the sewer system.

Units of this type are required by law to drain used water into the sewer system because it is becoming increasingly important to purify contaminated effluent.

It is not necessary to have a direct connection between these two systems if we are only discussing how water drainage from washing machines is organized into the sewer.

To fix the drain pipe on the bathtub edge, all that is needed is a U-shaped bracket from the unit’s set of sales. This addresses the problem of the drain’s height in relation to the sewer, which causes a water plug to form and stops water from flowing backward.

A check valve can be installed in many contemporary units to stop this process.

Although it has its own peculiarities, there are no issues with the connection considering the particular location of the sewage system in a home or apartment.

Since it is the most straightforward to implement, direct connections to the sewage system are utilized frequently. However, there are drawbacks to this approach.

In order to accomplish this, the spacer must be installed as a tee on the sewer pipe, with the outlet at a 45-degree angle.

The drain hose, which has a diameter of 50 mm and a length of 22 mm, is attached to the sewer pipe. Consequently, a unique spacer known as "reduction" is used to make the connection.

Every washing machine model has a standard drain hose with a diameter of 22 millimeters. For drainage from this size, there are no special adapters needed; this simple rubber piece is used on the transition.

A tee pipe is used to naturally connect the machine to the sewer pipe when it is situated close to the outlet.

However, the most sensible course of action will be to install an extra 32-millimeter-diameter PVC pipe with a subsequent size 50 transition if the unit is situated at the other end of the room.

In this instance, the pipe’s slope requirements—two to three millimeters per meter of length—must be met. These kinds of reductions are offered and sold in the marketplace.

When a machine is automatic, the used water is pumped out using the pump, negating the need for an intermediary pipe.

Under such circumstances, a rubber reducer is used to make the connection. It is a representation of a rubber sleeve. To seal the connection, ribs similar to those on the cuff are made on the outside. The inner hole has the proper diameter and is positioned in the same manner.

The height of the drain from the floor at which the water seal is formed must be specified in the technical documentation if the installed model of the machine does not have a check valve.

If this parameter is not kept up, very disagreeable smells will enter the room through the drain hole.

The second connection method A siphon is used to connect washing machines to the drain. There are numerous products with a unique outlet at the top.

It has a unique plug installed in the state of sale that blocks the branch pipe. This part has a purely protective purpose, so it must be removed before attaching the machine’s drain hose.

The washing machine’s drain hose is simply inserted into this spigot and, if needed, further secured with a clamp.

Multiple branches can be installed on this product, enabling the simultaneous connection of multiple units.

If at all possible, washing machine connections should be made in this manner, as it solves all tightness and safety issues and is highly dependable.

Although it may seem difficult, connecting your washing machine to the water supply and sewage system is a doable do-it-yourself project with the correct instructions. Your washing machine should be correctly connected and operating at peak efficiency if you follow the instructions in this article.

Prior to starting, make sure you have all the required equipment and supplies. This includes a drain hose for the wastewater as well as hoses for the hot and cold water connections. To make sure there are no compatibility problems, double-check that these parts are compatible with the model of your washing machine.

Next, find your home’s wastewater drain and water supply valves. Usually located next to your washing machine area, but check your home’s blueprints or call a plumber for help if you’re not sure.

To avoid any leaks or mishaps during the installation process, turn off the water supply valves once you’ve found the required connections. Next, attach the hoses to the appropriate hot and cold water valves with care, making sure they are tightened tightly to avoid leaks.

Attach the drain hose to the wastewater drain after attaching the water supply hoses. In order to prevent obstructions or kinks that could hinder the wastewater’s flow, make sure the hose is positioned correctly.

Lastly, make sure everything is working properly by turning the water supply valves back on and running a test cycle on your washing machine after making sure all the connections are tight. To stop additional damage, keep an eye out for any leaks or strange noises, and take quick action to fix any problems.

You can enjoy the convenience of clean laundry without hiring a professional by following these instructions and taking your time to connect your washing machine to the water supply and sewerage.

Video on the topic

Installing the washing machine. How to connect the washing machine. First disconnect the old washing machine.

Connecting the washing machine drain to the washbasin siphon

Correct connection of the washing machine drain. Siphon effect. Siphon with check valve.

How to connect the washing machine yourself, if you have never done it before

How to install a washing machine, connection of a washing machine to the water pipe. Plumber video lesson

How to connect a washing machine / Connect a washing machine without a plumber