Connecting the shower cabin to the water supply and sewage system with your own hands

Installing a shower cabin can be a fun project that increases the value of your house while also improving the functionality of your bathroom. Although it may seem difficult at first, many homeowners can complete the task of connecting your shower cabin to the current water supply and sewage system with a little planning and the appropriate tools. This post will walk you through the procedure, making sure you comprehend every step so you can complete it securely and with confidence.

It’s important to gather all required tools and materials before you begin. Pipes, fittings, a drill, wrenches, and—possibly most importantly—the installation handbook provided by the manufacturer are all included in this. You will be able to steer clear of common pitfalls by closely following the handbook, as each shower cabin may have different requirements and connections. To avoid any unintentional leaks or water damage, make sure to turn off your water supply before starting.

The plumbing layout in your bathroom must then be understood. It will be easier to plan the installation if you are aware of the locations and accessibility of your drainage and water supply pipes. Before cutting pipes or making significant changes, it could also be a good idea, if you’re not familiar with plumbing, to review the fundamentals or get advice from an expert.

The procedure entails making sure that your new shower has adequate drainage and connecting the hot and cold water lines. It is crucial to seal all connections properly to prevent leaks, and it will save you headaches later on if you test your setup before finalizing everything. You can quickly start taking advantage of your new shower cabin’s comforts and conveniences with proper preparation and execution.

Varieties of shower cabins

In its standard configuration, a shower cabin is comprised of a fence featuring doors, a tray, and water supply fixtures such as faucets, whirlpool equipment, and watering cans. These days, models with steam generators and music speakers added to the mix are also popular.

The two primary types of cabins are as follows:

• Open type – the design has no ceiling, there are only 2 (sometimes 3) walls, often using a gangway as a base;
• closed type – a small inner box, which is completely closed.

The primary benefits of the first category of models are their affordability and simplicity of installation; the drawback is that only the most basic functionality is available. Although pricey, enclosed cubicles come with cutting-edge features and can frequently be tailored to your preferences in terms of style and design.

In order to ensure that the plumbing is completely airtight, it is crucial to pay close attention to the waterproofing and alignment of the walls before installing an open-type shower cabin. Failure to take this action could result in water leaks and the spread of moisture throughout the bathroom.

Tight spaces are the hallmark of closed cabins; no extra steps need to be taken. Occasionally, if the functionality calls for it, these models are also connected to the electrical grid.

These plumbing fixtures also vary in terms of size (they are sold as tiny cabins, measuring 2.1 by 2 meters and featuring a bathtub as a base) and material of construction.

These variables have no bearing on the method used to connect the shower cabin to the water supply and sewer system. Only in the absence of the base entirely do problems arise, because.к. The sewage outlet and drain in this instance need to be bricked into the floor.

Prior to purchasing a shower cabin, consider the following factors:

• water hardness;
• protection of electricity sources;
• the size of the room;
• location of water supply and sewerage;
• room humidity level.

How to choose the location of the stall

Prior to physically attaching the shower cabin to the sewage system, you must locate an appropriate installation location. Knowing where the utilities are located is crucial at this point.

Installing the shower cabin close to a water and sewage system is advised. If a contemporary multifunctional system is installed, it might be necessary to have close access to the electrical network. It’s also advised to remember the importance of having good ventilation. This will stop water from getting on the walls.

As soon as the location has been decided upon, the floor must be level. Many issues will arise if the shower cubicle is tilted. It is preferable to handle floor leveling beforehand. Bases can occasionally have unique legs, but it will take some time to properly adjust them using a construction level.

Since showers are typically installed in corners, it is important to confirm that the angle between the two walls is 90 degrees before beginning any work. If not, after installation there will be a space between the wall and the stall. If it were smaller, silicone could fix this, but if it were wider, more wall leveling would be necessary.

Preparatory work, necessary tools and materials

You can start the major work after deciding on the shower cubicle’s location and, if needed, prepping the walls and floor. The handbook, which is typically included with the shower and needs to be thoroughly read, is what you should do first.

You should prepare the space, ground the metal components that will be connected to the power supply, check the model assembly yourself, and gather the required building supplies before connecting the shower cabin to the water supply and sewerage. Among them are:

• adjustable wrench;
• construction level;
• pliers;
• slotted and Phillips screwdriver.

Next, it is imperative to confirm that the kit includes every component that is required. Occasionally, it might be essential to buy an extra component for the water supply system. instruments:

• sealant;
• compression fittings;
• sealing material, e.g. fum-tape;
• 2 flexible water hoses;
• hoses for connection of plumbing;
• siphon and tees;
• connection adapter.

It is advised to inspect the water source. Installing specialized water filters will then be desirable and will prolong the life of the sanitary equipment. Following that, you can start the installation process by physically attaching the shower tray to the sewerage system.

Installing a shower cabin yourself can be a rewarding DIY project that not only saves you money but also allows you to customize your bathroom according to your needs. To successfully connect your shower cabin to the water supply and sewage system, you’ll need basic plumbing tools and a clear understanding of your home’s existing plumbing layout. Start by ensuring all connections are water-tight to prevent leaks, which involves correctly attaching water supply lines to the shower’s mixing valve and securing the waste line to your home’s drainage system. It’s crucial to adhere to local building codes and regulations, possibly consulting a professional to verify that everything is up to standard. With careful planning and attention to detail, you can achieve a professional-quality installation that ensures functionality and durability.

Mounting the pallet

It should be mentioned that different cabins may have different installation technologies. For instance, there are frequently differences between the connection points for the water supply and sewerage. Consequently, it is advisable to thoroughly review the technical documentation for the model you have purchased before beginning any work.

Installing the tray is the first step, assuming it is part of the design. It can be raised or lowered from the floor thanks to the unique support legs that hold it up. With the aid of a level, the curb’s horizontal position is also adjusted to match their assistance. In order to prevent water buildup, it is crucial that the base is firmly in contact with the wall and that there are no tiny holes in the floor.

In the event that the operation permits the existence of electrical appliances beneath the tray, it is advised that they be positioned on a separate metal frame. Safety regulations forbid leaving them directly on the room’s floor.

It is imperative to install the pallet in a strictly horizontal orientation. A small inclination is intentionally created by the manufacturer during the manufacturing process to guarantee that the drainage liquids will enter the sewer system. Water won’t be able to escape on its own if this component is installed unevenly, and after it dries, remnants will remain on the floor.

Certain open-type models lack a tray; therefore, you will need to make it on your own. Most of the time, a small elevation with a drainage drain is used to build a concrete podium with tile or mosaic lining. The steps in the procedure are as follows:

1. Lay out the perimeter of the base. The most common type of full-body brick used is the ceramic variety.
2. At the required height, a drain is placed, which should then be connected to the sewerage system.
3. A screed of concrete is made with the obligatory creation of a slight slope to the drain.
4. Tiles are laid with the help of water-resistant adhesive.
5. Joints should be grouted using a water repellent or a sealant designed for plumbing work.

You can add PVA or liquid glass to the cement solution to stop the base from soaking later on. This will greatly improve the structure’s ability to repel water. It is also preferable to apply a specific waterproofing material to the floor, side walls, and resulting concrete base prior to tiling.

The standard drain pipe diameter, which is 4 cm, is used. Selecting a smaller diameter will raise the possibility of clogging. It will be challenging to squeeze the pipe into the tiny area beneath the shower stall if the pipe’s cross-section is larger.

Installing a shower cabin and connecting it to the sewage and water systems yourself can be a satisfying do-it-yourself project that will improve your plumbing knowledge while also saving you money. Even though it could seem overwhelming at first, most homeowners can accomplish professional-looking results with the correct tools, careful planning, and attention to detail. Remember that patience and careful planning are essential for success.

To avoid leaks that could eventually result in water damage, it is crucial to make sure all connections are watertight and correctly aligned when starting a project of this kind. A durable installation can be achieved by using high-quality materials and paying close attention to the manufacturer’s instructions. Verify each joint and seal twice to avoid any problems that might occur from a bad installation.

Furthermore, following local building codes and regulations is a responsibility that comes with DIY projects like these, even though they can be very fulfilling. This not only guarantees safety but also that your installation complies with regulations, which is important, particularly if you intend to sell your home in the future. Never be afraid to seek advice from or hire a professional plumber if the task seems too big for you to handle; in many cases, doing so can save expensive errors and guarantee that your installation meets industry standards.

Lastly, keep in mind that there are a ton of tutorials and videos available online that can offer advice and pointers for the particular shower cabin model you own. By making use of these resources, you can improve your comprehension of the work at hand and gain more confidence as you go. Connecting your shower cabin can be a simple and effective do-it-yourself project that improves the comfort and value of your house if you take the proper approach.

Video on the topic

Connecting the washing machine, washbasin and shower cabin to the water supply and sewer system

Connecting the shower cubicle to water. What neither the instructions nor the salesmen say.

Connecting the shower cubicle to the water supply with a flexible supply line and to the sewer with a corrugated pipe. By your own hands.