Bulerian stove with a water circuit of heating

Picture a comfortable house where warmth comes from sources other than a conventional fireplace or HVAC system. Imagine a system where your heating not only keeps you comfortable, but also promotes energy efficiency and sustainability. This is where the water circuit heating Bulerian stove comes into play, completely changing the way we think about heating our houses.

The idea of the Bulerian stove, sometimes referred to as a masonry heater, dates back hundreds of years and has proven to be resilient. From Russia and Finland in particular, these stoves are native to Eastern Europe and have long been a mainstay in cold climates. Their exceptional effectiveness and distinctive design, which enables long-lasting heat distribution and retention, are what distinguish them.

The Bulerian stove’s inclusion of a water circuit for heating is what really sets it apart from the competition. This upgrade elevates the conventional masonry heater by utilizing heat to heat water that can be distributed throughout the house in addition to the immediate area. It is a flexible and useful option for contemporary homes looking for both warmth and sustainability because of its dual functionality.

In contrast to traditional heating systems that mainly rely on electricity or fossil fuels, the Bulerian stove with a water circuit runs on a sustainable and green principle. Heat is produced by burning biomass materials, such as wood, and is subsequently transferred to the water that is flowing through the stove. After that, the heated water can be used for a variety of things, such as heating homes, swimming pools, and spas, as well as heating spaces.

The principle of operation of the furnace Breneran Aquaten

1. A special manifold is mounted on convection pipes from above and below.

1. On the lower manifold there is a discharge for the return, on the upper, for supplying the coolant.

1. During the furnace, the coolant is heated, which creates pressure in the heating system, which allows to ensure natural circulation, as well as the rise of the liquid to a height of 8 m. The coolant through the pipes enters the heating devices located in the rooms.

1. After cooling, the coolant on the return is returned back to the boiler to the pipes connected to the lower pressure collector.

Simultaneously, the water boilers employ the pyrolysis or gas generation principle, which permits the utilization of gas generated during the burning of solid fuel. The design calls for two furnace chambers. Firewood is burning in one, and gas is burning in the other.

The boiler is switched to the gas generation mode after the furnace chamber has reached the necessary temperature. The fuel smolders rather than burns when gas is generated, increasing autonomous work from a single bookmark while keeping the heat transfer coefficient comparable to that of burning firewood traditionally.

Long-burning Breneran stoves, known as "Bourgeois" in Canada, were designed to operate on firewood. While the use of wood waste, peat, and wood briquettes is permitted, there is a noticeable decline in the indicators of heat transfer and energy efficiency.

Types of Aqua Breneran stoves

CJSC Laothers, a plant that produces Aquaten Breneran boilers, created and published a number of fundamental adjustments for gas generator furnaces that have a water circuit. Models have the advantage of being highly efficient and having an electric heating element that lets you keep the room warm even after the solid fuel has burned through.

An indirect heating boiler can supplement the stove if needed, providing just the right amount of hot water.

The following modifications represent the lineup of Russian-manufactured Breneran Aquaten solid fuel gas generator furnaces:

• ATVT 19 – one of the most productive models of the line. Suitable for heating industrial and domestic premises. The design provides an anti -frustration system. Breneran Aquaten Autov 19 has a powerful ability to heat buildings with a total volume of up to 1000 m³. The efficiency is 70%, and one laying of firewood is enough for autonomous operation within 6-10 hours. The weight of the structure, with an empty furnace chamber, is 350 kg, which requires the preliminary manufacture of the foundation, for installation of the furnace.

• ATVT 14 – modification that is optimally suitable for heating residential premises. Technical characteristics of Breneran Aquaten Autv 14 are as follows: weight 250 kg, performance calculated for heating 400 m³, length and width do not exceed a meter. If necessary, you can clad the stove with brickwork or close the protective casing.

• ATVT 11 – a lightweight version of the gas generator furnace. The mass of the structure is only 150 kg, allows installation without special manufacture of a concrete base. The set offers legs that ensure the stability of the furnace. The maximum heated volume of the room is not more than 200 m³.

• ATVT 06 is a model, in a series of heat generators Breneran with the lowest power. Performance is enough for 100 m³, for almost one room with 30-40 m². The weight of the equipment is only 86 kg, which significantly facilitates the installation and installation of Aqua Breneran Avotv 06.

Consider the burner’s performance when selecting a wood-burning stove with a water circle, Brenneran Aquaten. The coolant volume and the actual heated area are indicated in the technical documentation.

How much does Breneran Aquaten cost

Depending on the model and its power, the price of the Brenereran Aquaten stove is marginally more than that of models without a water "shirt."

• ATVT 06 – will cost 16,200 rubles.

• ATVT 11 – for this model you will have to pay 23,800 rubles.

• Autv 14 – the cost will be 27,400 rubles.

• ATVT 16 and 19 – for semi -industrial models you will have to lay out 45 and 55 thousand. rub. respectively.

The total cost of pyrolysis boilers using Breneran Aquaten, a long-burning fuel, is computed based on the additional configuration that may be required. They also account for the cost of the connection to the heating system, installation labor, etc.

Advantages of water heating from Brencean

Breneran gas generator furnaces are superior to their analogues that operate on the principle of air heating in a number of important ways.

• The rooms are heated using standard heating radiators, and not through air circulation. Therefore, the models are suitable for heating one- and two-story individual residential buildings, and, there is no need for additional equipment in the form of air ducts.

• It is allowed to install in the house without a basement. With proper installation and regular maintenance of the furnace, there is no probability of smoke entering the room.

• Breneran Aquaten stove is welded of steel with a thickness of 2-3 mm for an external casing, 5 mm for a furnace chamber. In the manufacture, heat -resistant alloys are used, which significantly increases the life of the device.

• The ability to connect to a heating system of almost any type. The main thing is to choose the right and calculate the performance of the furnace. Breneran feels equally well when connecting to the heating system with natural and forced circulation.

• Simple installation. It makes sense to put a modification of Breneran furnace with connecting a water heating system if there is no desire and the ability to connect gas heating. Aquaten model provides maximum convenience of operation. If necessary, it can work in anti -friction mode. Electric Ten will heat the coolant to the required temperature.

Disadvantages of water boilers Breneran

Of course, there are drawbacks to boilers, but they are so negligible and subpar compared to the benefits that they are hardly ever discussed in building forums or on other websites. However, based on the multiple comments that were discovered, the issues with the oven are as follows:

• Use without water Model Breneran Aquaten will not work. The structure is provided exclusively for liquid cooling.

• Aquaten has the disadvantages of all gas generator models. The characteristics and performance are affected by the quality of the fuel, errors when installing a chimney.

The stove will operate almost trouble-free if the installation is carried out in compliance with all of the manufacturer’s recommendations.

Comfort, energy economy, and sustainability can all be significantly improved by installing a Bulerian stove with a water circuit for home heating. By using wood as a renewable energy source, this conventional but creative heating solution lessens dependency on fossil fuels and carbon emissions.

The capacity of a Bulerian stove’s water heating system to evenly distribute heat throughout your house is one of its main benefits. You can achieve constant warmth throughout every room and get rid of drafts and cold spots by running hot water through radiators or underfloor heating pipes.

Furthermore, the Bulerian stove’s incorporation of a water circuit increases its adaptability by enabling you to heat your home and produce hot water for household purposes. The stove’s dual functionality increases its usefulness and affordability, making it a wise purchase for homeowners looking to save money and live comfortably.

The compatibility of a Bulerian stove with a water circuit with renewable energy sources, like solar thermal panels, is an additional advantage. You can lessen your impact on the environment and your dependency on non-renewable energy sources by using solar power to heat water.

In conclusion, homeowners wishing to improve the comfort, environmental sustainability, and efficiency of their heating system will find many benefits from choosing a Bulerian stove with a water circuit. With its even heat distribution, dual functionality, and compatibility with renewable energy sources, this conventional heating solution offers a contemporary method of heating a home that takes into account both ecological and practical factors.

A notable option for effective home insulation and heating is the Bulerian stove with a water circuit. This creative system combines contemporary heating technology with the classic warmth of a stove. The stove efficiently captures and distributes heat throughout the house by running water through it, providing constant warmth while using the least amount of energy possible. By gradually lowering heating expenses and decreasing dependency on fossil fuels, the Bulerian stove has positive effects on the environment as well as the economy. For homeowners looking for eco-friendly and comfortable living spaces, its simplicity and versatility make it a compelling option.

Video on the topic

Bulerian stove with a water circle (part 1)

Water Bake Bulerian for heating and its differences from the boiler Breneran Aquaten

Heating of our service. Bulerian with a water shirt. With your own hands)

Bulerian, water circuit.

Breneran (Bulerian) Aquaten 01

Bourgeois with a water circuit. Review of the first month of work