Brick stove dimensions, characteristics, description and reviews

A brick stove can be a great addition to your house during the colder months to keep it warm and comfortable. Not only do these classic fixtures offer effective heating, but they also give any area a hint of rustic charm. We’ll examine the features, benefits, and measurements of brick stoves in this post along with actual user feedback to assist you in making the best choice for your house.

Because of their strength and capacity to hold heat, brick stoves have been a mainstay in homes for hundreds of years. Brick stoves use the well-established concept of radiant heat, in contrast to contemporary heating systems that might be powered by gas or electricity. Even on the coldest days, they can create a comfortable atmosphere by burning wood or other fuels to create warmth that permeates the surrounding area.

The size of a brick stove is an important factor to take into account. For different spaces and heating requirements, these stoves are available in a range of sizes. While some are larger and able to heat entire homes, others are small enough to fit neatly into tiny cabins or rooms. With the right measurements and knowledge of your space’s heating needs, you can choose a stove that is both aesthetically pleasing and highly efficient.

Brick stoves have a number of features that distinguish them from other heating options in addition to their size. They can hold heat for longer thanks to their sturdy construction, providing a constant and comfortable temperature all day long. Many models also have built-in ovens or cooking surfaces, which increases the functionality of these models. Some stoves go so far as to include elaborate patterns or ornamental accents, making them the center of attention in rooms.

Let’s now hear from homeowners who have used brick stoves in the past. Reviews from previous users offer insightful information about the usefulness of owning and utilizing these conventional heaters. Speaking with people who have lived with brick stoves can help you anticipate any benefits or challenges before making your purchase, from installation ease to maintenance requirements.

Dimensions	Characteristics, Description, and Reviews
Standard size: 36"x36"x36"	Average-sized brick stove suitable for small to medium-sized rooms. Provides efficient heating and cooking functionality. Users praise its durability and traditional appeal.
Large size: 48"x48"x48"	Spacious brick stove suitable for larger rooms or areas requiring higher heating capacity. Offers ample space for cooking and baking. Reviewers highlight its ability to maintain warmth for extended periods.

What are the advantages of this material

Furnace bricks have been used for many years to maintain a warm and inviting atmosphere in suburban estates, country homes, bathhouses, and saunas because of their capacity to heat up quickly, stay warm for an extended period of time, and spread out gradually over a dwelling. Additionally, a stove brick’s strength and durability have made it a very common and well-liked material with a broad range of applications in numerous construction fields.

• in the laying of columnar and other types of foundations;
• when erecting walls of buildings, outbuildings and other structures;
• for the construction of fences and columns for fences;
• during the construction of partitions.

Types of brick notches in Picture 1.

Certain red-legged clay grades are used in the production of furnace bricks, which affects the color of the building materials. Clay briquettes give in to firing during production and compress extremely tightly. This gives the building material more strength and refractive index.

Thus, red stove-brick can tolerate temperatures as high as 1000–12000 °C when heated, but construction red brick cannot tolerate such high temperatures and will crumble.

Additionally, the complete brick brands M-150 and M-200, which are used to lay foci, ensure that this type of building material is strong enough to support pressure loads ranging from 150 to 200 kg per cm².

Go back to the contents table.

The dimensions of the chimney

When laying a chimney, it must be remembered that its vertical dimensions will have the greatest impact on traction. The correct chimney should not have a height of less than 5 m. Among other things, the height difference between the surface of the roof and the heading is crucial. Thus, the upper point of the pipe should be at the level of the ridge or be slightly higher at a distance to it no more than 3 m. If we are talking about a flat roof, then the elevation above it should be 1 m or more. Когда обустраиваются печные трубы, кирпича размеры необходимо учитывать. Thus, the thickness of the walls should be 10 cm, as for residential buildings.

The area of the pipe’s interior must be consistently laid out along the entire length of the brick. The dimensions of the construction also affect the chimney’s size. It will therefore appear absurd to install a large pipe on a small house. The pipe with internal dimensions of 260 x 130 mm will use the least amount of brick. You can arrange the bricks in this design by laying out each row of five.

Large portal Russian furnaces are among the more striking sizes of pipes that are available. It is advised in this situation to select a stove brick whose measurements will enable you to create a 260 x 260 mm channel section.

What is the size of the stove brick red and chamot

The right material must be chosen in order to construct a good, long-lasting stove. The primary factors to consider when selecting stove bricks are their size, cost, quality, and relatively high strength.

There are various types of modern furnace bricks, including wedge-shaped, arched, and traditional. Refractory clays are used to make them.

The primary prerequisites are:

• heat resistance;
• low thermal conductivity;
• Thermal resistance.

When the right materials are chosen, your stove will function well, last a long time, and be reasonably priced. These kinds of bricks exist:

1. The chamotoma contains more clay, is made of refractory clays and kaolins by firing at a very high temperature. The composition includes aluminum oxide, the right color is yellow.
2. The main one is made of lime-magnesium masses.
3. Quartz is made by connecting quartz sand along with chamot. So, it is forbidden to use it in the body of the furnace, since it cannot be reacted with substances that have an alkaline reaction.
4. Carbon is made of pressed coke, designed for the construction of domain furnaces.
5. Full -bodied is intended specifically for the furnace itself, burned according to a specific technology. Stoves, rude, fireplaces and chimneys are usually laid out from such building material.

Manufactured furnaces and fireplaces are constructed using quartz and chamotis red brick.

Dimensions, weight and price

You must purchase items that vary in size and configuration to guarantee the ease of installing the furnace. Table 1 has all of this information.

Table 1 shows the stove brick dimensions while accounting for shape

Form	Designation	Dimensions
Straight	ShB-5SHB-8	230 x 114 x 65230x 114 x 40
End wedge	ShB-22SHB-23	230 x 114 x 65 x 55230 x 114 x 65 x 45
Verbrous wedge	ShB-44Shb-45	230 x 114 x 65 x 55230 x 114 x 65 x 45
Flashlight	Shb-6	250 x 120 x 65

The standard dimensions of the stove brick have a Leshada. It is produced in the form of a parallelepiped. Its largest line is called the bed, the middle one is indicated by a spoon, and the smallest one – with a poke. In the end wedge, the poke has a narrowed shape, and in the teene, the spoons is narrow. These two types are used for figure masonry. In addition to standard products, you can purchase chamotte slabs. Their dimensions are similar to the size of the firebox, which they should block. As a rule, the sale of such products is carried out in the size of 460 x 230 x 75 mm and 600 x 230 x 90 mm.

The article contains information on how much brick is in 1 m3.

The weight of a stove brick is shown in the video: This URL is https://www.YouTube.COM/Watch?V = R27ML5G7LE8.

Chamotum can be utilized for the construction of the furnace as well as the furnace’s overall structure because it has the ability to retain heat energy. This kind of solution pays off handsomely in a decorative scheme, as the straw-golden hue of the clay bricks gives the impression of warmth and coziness throughout the home.

Fireclay brick comes in a variety of shapes and sizes that make it suitable for both direct and trapezoidal vaulted surface layouts. The addition of such material when utilizing a power tool is another benefit. Since this material is regarded as environmentally friendly, it is actively utilized in the furnace and fireplace installation.

The stove’s weight suggests a standard value that influences the pallet’s overall mass of all the materials. With its value, you can easily calculate the weight that will be placed on the constructed structure’s foundation, the mass of one cubic meter of the material, and the carrying capacity of the vehicle that will be needed to deliver it.

The weight of the red stove-full material will be:

• 250x120x65mm – 4.2 kg
• 228x115x64mm – 3.6-3.8 kg

In the case of refractory red brick, the weight

• 250x123x65mm – 3.4 kg
• 230x113x65mm – 2.9 kg

Let’s focus on product costs now.

It is an attack by the dimensions, and it also depends on the material that was used in the manufacture:

1. Red brick faces costs 60 rubles apiece.
2. Brick red front chopped costs 70 rubles.
3. Brown brown brown costs 75 rubles.
4. Fireplane brick will cost 85-110 rubles.

Constructing a furnace involves a great deal of responsibility because fire is involved. Considerations such as material, weight, size, and properties must be made when selecting a material for the masonry. Your comfort will only come from using high-quality masonry and the appropriate material. You might also be helpful if you know how to prepare a solution for installing a furnace. The proportions needed to prepare the clay solution for the furnace’s masonry are explained.

Characteristics and properties of stove bricks

Producing stove bricks using German machinery

So, how will we go about creating a brick for furnaces?

Two methods of burning are used to make ceramic. Specifically:

1. Semi -dry pressing. This method is interesting in that the clay solution, falling into the drum, passes a partial drying, and only then rubs in a crusher in the sand.

After that, a brick of a specific size is formed in the press. The formed bars are fired as the last step.

1. Plastic formation. At the same time, a mixture of clay, being wet, takes place into a strip press, which has the shape of a longitudinal beam, acquiring the same shape. Then this beam is cut into bricks, the desired size. Then they burn.

This type of brick is used for chimney installation because it is destroyed by heat.

Why is it not possible to build furnaces using regular red brick?

1. With an increase in temperature to 800 degrees, it begins to melt. And the firebox from firewood, not to mention the coals, heats up to higher temperatures.
2. After cooling, he begins to crack and crumble.

You should be aware that the brand and form of the material you choose for your furnace brick will ultimately determine its quality.

Here, the load that supports the beam at 1 kV and the strength (m) are shown.cm. If M-150 is mentioned, it means that a load of 150 kg can be supported by 1 sq. cm of brick. The certificate states that furnace work is the intended use for it.

Types of brick used in stoves

The class of brick refers to the temperature at which it can withstand a fire.

• A-do 1400 degrees.
• B- up to 1350 degrees.

Let’s now investigate what makes the brick have a stove. Specifically:

1. Standard- 250x120x65 mm.
2. For figure masonry, a narrowed brick tablespoon is used.

1. With a narrowed bite, called the end wedge.
2. Shamot slabs are used to overlap furnaces.

Given the weight and size, it occurs:

1. Standard.
2. Double. Often use double silicate.

1. One and a half.

A stove’s brick density of 1500 kg/m3 is ideal. Should this not be considered, then

The benefits and drawbacks of stove brick

Long periods of time will pass while your stove is heated and cooled. It needs to be highly dense in order to heat up the process and retain the heat for a longer period of time.

There are benefits to using stove bricks.

• Endurance of high temperatures.
• the ability to accumulate heat and give it for a long time.

Drawbacks:

• draws moisture and gives it badly. On the street, especially in raw weather, it is not recommended to hold it, it will be harmful then to the quality of the future furnace.
• Its properties are lost with the incorrect gluing technology.

Building a furnace is an extremely intricate process that calls for both skill and premium materials. Sometimes a special yellow-colored construction brick is used to build as fuel and ash.

The front GOST 530-2007 and GOST 390-96 standards-stove bricks control the rectangular shape of the brick. However, some manufacturers alter the dimensions and setup.

Clinker Brick:

Clinker is one of the most widely used bricks. It works well with both internal and external furnace types. It has every quality needed to be used in furnace construction. Specifically:

1. Shock resistance.
2. High environmental friendliness.
3. Attractive appearance.
4. Resistance to wear.
5. Immunity to the temperature difference.
6. Water resistance.
7. Long service life.
8. "Breathing" brick, reduces the risk of condensate formation.

Possible options for placing brick in the furnace

The picture shows you the obvious choice for brick when it comes to using it in the furnace. In other words, the furnace should appear like this from the perspective of the "bricks": Foundation1, Firebox2, Smoke Turn3, Chimney4, and Chimney5.

Foundation

It should be extremely durable because it forms the foundation of the furnace’s entire structure. Furthermore, he needs to be resistant to steam and moisture since even a small amount of water shouldn’t be able to pass through it. If not, the entire apparatus will become moist, and the topic of quality heating can be explored. A sizable portion of the base may experience temperatures below zero during the winter. Consequently, frost-resistant bricks, which can be of first-rate material or third-grade brick, should be used to build the foundation. The clinker stone is also an option.

• In terms of price-red brick of the 3rd grade;
• in the case of a heavy structure (for example, Dutch), give preference to the 1st variety, as the most solid and high-quality;
• In areas where mostly long winter and severe frosts, clinker brick is best suited, since it is distinguished by high strength and frost resistance.

Topka

Temperature indicators in this area of the furnace may read 1100 °C or higher. As a result, ceramic material is completely inappropriate because it melts at temperatures between 1150 and 1180 degrees Celsius.

There are not many mechanical loads on the firebox. This furnace element’s primary job is to quickly absorb a lot of thermal energy and transfer it to the facing and chimney, which act as a heat-producing battery. It is evident that the firebox’s layout and shapes have these characteristics.

The smoke -turn

450–800 °C of heat is still being generated by smoke gases even though there is no direct fire contact. One of its purposes is that they are totally burned inside of it, meaning that there is still chemical activity present in the gases here. Furthermore, a significant amount of thermal energy builds up in the chimney and needs to be released in order to sustain the firebox’s subsequent operations. Consequently, here’s without options: first kind.

Facing

It contributes significantly to heat transfer as well, but it also allows the heating structure to "breathe" to a great extent. Furthermore, the cladding must maintain the finish well, which is difficult in these circumstances due to extreme temperature swings. It is advisable to cover the structure with inferior brick in this situation.

The truth is that these stones have higher porosity, which in the complex will give a stove with deep, even breathing, and a heat capacity appropriate for the location. Additionally, a little bit of roughness and unevenness on the second brick face will ensure perfect adhesion when using any kind of mixture and subsequent ceramic tile cladding.

Chimney

If you look at the chimney, then the part is above the bit – the chimney, in the photo indicated by the number 5. It is here that maximum fluctuations in relative humidity (from 10-15% to 100%) and temperature indicators (from 400 ° C to -45 ° C). In addition, rain or snow can directly fall into it, other atmospheric precipitation. Plus, large wind loads that can change in directions over a short period of time. Despite this, the material for the pipe should be such that it can quickly warm up, otherwise there will be no normal traction, which will lead to slow heating and the furniture as a whole. Therefore, it is recommended to build a chimney from bricks of the 1st grade (under normal conditions). A good option is the use of brick bricks, soaked soot (the so -called mezhigorka). Although such material is used only inside the building, since it is possible on it spots that can break through the good finish.

You must install a two-layer pipe if you reside in an area with extreme weather. For this, the inside should use the clinker option, and the exterior should be laid with a hollow first-rate material. This is the only instance of hollow material being used in a stove.

Recommendations for the choice and use of stove bricks

The fact that Chamotis Brick can absorb moisture over an extended period of time is one of its drawbacks. Consequently, storing it on the street is not advised. The primary components of the furnace structure must be laid out using only red brick; burnt or incomplete brick loses its qualitative qualities. A brick should be flat, have sharp edges, and have sizes that are GOST-designated.

The chamotte’s surface should be matte and free of any film that would suggest Saman could collapse due to potential temperature variations.

The sound produced by a hammer striking a brick bar should be loud and clear. A deaf sound indicates both inadequate hardening and drying as well as the existence of voids. The blow site should be free of any remnants.

You can assess the quality of the structure by cutting the chamotis in half; it should have a dense, uniform structure. It shouldn’t have any unnecessary inclusions, such as tiny clay fragments; this would be a technological error in the brick material’s production.

The denser structure of the furnace will warm up for an extended period of time if the M250 chamotte brand is used during construction.

When selecting the material, it’s crucial to consider not only the furnace’s red brick size but also the brand’s frost resistance as this signifies the material’s capacity to absorb moisture, which is particularly crucial when installing a chimney. It is advised to use the least hygroscopic brick possible when building a stove foundation, i.e.

It is advised to select a brick with the lowest water absorption, or hygroscopic indicator, when building a stove foundation.

Hyperpressed Saman is suitable for laying street barbecue furnaces, but it is not advised for use in residential furnaces due to the limestone in it being unstable to high temperatures and prone to collapsing when exposed to carbon dioxide emissions.

For the stove, brick

Red brick with an M200 density cannot be used to lay the street portion of the pipe, the furnace chamber, or the chimney because it can collapse after one to two years.

Can be used by an old chamotis remaining after the dismantling of buildings and structures, provided that its structure is not destroyed, and the surface is a whole. At the same time, the old masonry of the brick used was supposed to be clay or cement. If the old masonry was on a limestone basis, such a saaman can only be used as a base for a fireplace or pipe heads. The old charter used when laying out the stoves can also be used provided that its surface is well cleaned of soot, otherwise, with a new laying on the outer surface of the pipes and the front part of the furnace elements, black spots will appear.

Types of stove bricks

Shamotnaya

Shamotic brick is resistant to temperatures as high as 1,500 degrees Celsius! It is composed of aluminum oxide and chamotis crumbs mixed with refractory clay. then fired in a specific manner in line with a rigid plan.

The stone appears porous from the outside; it is a faded red with a hint of yellow, and there are dark striations visible. It doesn’t have any cavities, but it feels lighter than usual when measured by weight. They heat up quickly and distribute heat well because chamotis brick is a lightweight mass of masonry.

Shagots are usually placed in areas that directly encourage fire, rather than being used for the full stove. Shamot is five times more expensive than regular classic stone, which helps to explain this.

Fireproof red

Stoves are typically folded from this type of stone because it is less expensive than chamotte. Refractory clay is the basic. Graphite crumb, coke, and quartz powder are also included in the mixture.

The well-known classic brick appears to be hollow inside and looks like everyone else. in the shade of the iconic yellow. Appropriate for the stove’s exterior cladding and parts that come into contact with fire.

The stone can hold onto heat for an extended period of time due to its high heat capacity. You can fold a Russian stove, a barbecue stove, or a bathhouse out of this kind of material.

Clay

The material that is most widely used on the market in terms of value for money. is refractory and can tolerate temperatures of up to 1300°C. Durable, deform-proof, and unafraid of abrupt temperature changes all at once.

Stoves made of clay brick are frequently placed in bathtubs because the material is so strong that steam can be produced by pouring cold water on hot bricks. The stove will also continue to function properly for many years.

Clinker

Is a bulky, dark-colored parallelepiped. The surface is nearly porous and level.

You can use such a stone in the furnace’s construction, but the cost of building it will be high. It is rarely used in Russia due to its high cost. Furthermore, the clinker’s maximum allowable heating temperature is 1300 degrees, which is marginally lower than Chamot’s.

Brands

You have to be aware of their brands in addition to the range of building materials. Frost resistance and a brand in density are the primary attributes.

The density of the brand displays the material’s strength. An appropriate brick for a stove in a home or a bathroom would be one with a density brand between 200 and 250. The kindergarten will take too long as a result, so the indicator is totally unnecessary.

Resistance to frost It is something you have to consider when building a street barbecue stove or when building a chimney. The stone’s ability to retain and release moisture is indicated by its frost resistance brand. You must select the brands that are most resistant to frost for pipes and street buildings.

The most common manufacturers

Brick is used to build numerous factories in Russia and nearby countries. The most popular types for installing furnaces are as follows:

"Borovichi." produced in Nizhny Novgorod under the same name. High frost resistance (density of 250).

"Shop Vitebsk." made in Belarus. Although the density is 200, there is very little resistance to frost. They can arrange them in the room, but a stone like that isn’t appropriate for pipes.

"Shamotnoy." Numerous businesses, including the Sukhozhsky Plant in Perm and the Belokamensky Factory in Ukraine, produce it. It is advised to use when building the furnace’s components that come into direct contact with the flame.

Which brick to choose for the furnace, laying out its specific element

Different types of bricks are used to arrange different structural elements in this:

• foundation;
• topic cavity;
• chimney;
• chimney;
• Facing.

It should be recognized that this furnace element is susceptible to Earthly influences such as cold and humidity when choosing which brick to use as the base. Furthermore, the entirety of the upcoming structure rests upon it. The pricing of the third variety is appealing. The first type is the best choice if a large, heavy stove is to be built. If you live in a very cold climate, you should consider using clinker brick, which has a high strength and significant resistance to frost.

The furnace’s extremely high temperatures are one of its defining characteristics. Even when it is constructed using first-orient ceramic bricks, it is not sufficiently refractive for the furnace. As a result, the firebox is frequently constructed using chamot or brick quartz.

There should be some caution used when working with quartz bricks. It cannot be placed in the furnace’s body or foundation, where lime is almost certain to be present, as these products react with alkaline materials and are ruined.

Shamotic brick is less particular. You can style it by arranging any element of the furnace.

What sizes do red stove bricks have

Brick construction has developed over the years, and a classic model of material with sizes so that it was easy to hold in one’s hand and receive even, smooth masonry without excessively wide seams has been formed.

As of right now, the ideal brick sizes determined through experimentation are laid out as follows:

• length – 250 mm;
• width – 120 mm;
• height – 65 mm.

It is very convenient to alternate such single full-bodied bricks of a standard size in both longitudinal and transverse masonry.

But, half, quarter, or three quarters of the building materials are frequently needed during the construction process. There are never any issues because you can always make a larger, smaller version.

You must just:

The red brick’s measurements.

• measure the desired size of the brick;
• On its wide (spoon) part with a pickle, apply a notch for a pitch line;
• to hire a shallow groove on a notch;
• split brick with one strong and clear blow.

In this instance, the brick’s notch will resemble this (rice. 1). You shouldn’t become alarmed if breaking the brick into the appropriate pieces the first time was not possible. The hand will quickly fill up and the skill will become fixed during this process. Following its splitting, the resulting incomplete brick needs to be smoothed out using light, gentle blows from a pickle.

If the brick needs to be split across rather than along its shape, as in the figure, this is a difficult task. The only modification to the procedure is that the furrow needs to be made a little bit deeper. Even with experts, however, the outcome is not always satisfactory because it is harder to separate the material and frequently a marriage is produced at the output (uneven, not corresponding to the notch).

Go back to the contents table.

Which brand of brick is better for the furnace

The brand of stove brick is determined by its composition. The letter W and a digital index designating the heat resistance are printed on Shamot material. Bricks with the markings SH-5 and SH-8 are appropriate for the furnace.

High-quality fireproof brick, which is particularly well-liked by domestic consumers, is produced by multiple factories:

• Nicolskoye factory (NKZ).
• Lode.
• Borovichi Fireproof Combine.
• Vitebsk short circuit.
• Rauf.
• Refractor Novomoskovsk.

Brick rating is the highest among goods produced in Russian factories. Foreign goods are used for upscale decorative decoration and are more costly.

Consider the mason’s recommendations when selecting a masonry material. The expert will be able to select the stone that works best in each situation.

How much is a stove brick cost

A full-colored clay brick is used for furnace laying. The cost per unit varies between 40 and 60 rubles for various manufacturers. If different additives were added to the material that increase heat resistance and other characteristics, the cost of bricks for a stove increases by an average of 20% per piece.

Existing brick may be used to lay furnaces provided it is free of visible mechanical damage and cracks. Depending on quality, there is a 30–50% reduction in price.

A figured brick falls into a different category. The price per unit ranges between 120 and 150 rubles. If you figure out how many bricks the furnace will need in advance, you can find the cost of purchase. A skilled calculator produces results with an error rate of no more than 1% to 2%.

Cutting stove bricks

The furnace’s standard red brick measures 120 x 250 x 65 mm. Five millimeter deviations in width and length are permitted, either to the larger or lower side. Without a doubt, you will have to change the material’s size.

Using a specialized machine with water cooling is preferable. There are no chips or potholes where the cut is made.

There are several other approaches to address the issue of cutting:

• Brick processing with a grinder – cut is made by means of a diamond disk. During cutting, a large amount of dust is produced, which must be taken into account if the work is carried out inside the house.
• Cutting with a jigsaw. Some experienced craftsmen adjust the size manually. Small cuts are performed by a "grinder". Figure cut – using a cable with diamond inserts and a jigsaw.

Grinding risza will undoubtedly be necessary. Special drill or grinder nozzles are available for this use. The flawless surface is left over after processing.

Is it necessary to soak the brick before laying the furnace

Bricklaying masters worked for over ten years before soaking stones for a few hours. The properties of the masonry mixture and the red brick have now undergone major alteration. As a result, the method of laying has evolved.

Whether or not to soak the stone depends on a number of factors:

• Type of solution – when laying on clay, you can soak the brick for a few minutes. If you plan to use a special masonry solution, there is no need to preliminary preparation of the stone.
• Product quality – used brick, it is better to soak or at least moisten with water, sprinkling to the surface.

How to wash the brick after laying the furnace

Heights will appear even after the furnace has been neatly laid; a solution will still be on the walls. There are various methods for cleaning the surface:

• Special cleaners – sold in any construction supermarket. Remove any pollution from the surface. The composition does not include abrasive substances. Cleaning products, this is the best option if you need to clean the facing brick on the clay masonry of the furnace.
• Water and hard brush. Water is a universal solvent that removes most pollution. The brush will remove the dried ups and the rods.

Sandpaper and other abrasive cleaning solutions cannot be used while cleaning. It is important to remove all influxes and surface-level solutions right away during masonry. The secret to a well-executed stove masonry is accuracy.

Computation of the warm water floor’s power and temperature

Refractory production technology

The following steps are involved in making a typical heat-resistant brick:

Production plan for fire products

• A raw material is delivered to the workshop, which undergoes a certain preparation – refined clay and various additives are crushed, mixed to achieve a homogeneous consistency. At the same time, 10% of water from the total volume add.
• Each brick production workshop should be equipped with a bunker, where prepared raw materials are shifted.
• After that, it moves to the molding carriage.
• The formed brick falls on the lower punch of the press form.
• With the help of the press, the product is compacted.

Every workshop needs a special tunnel-type stove where the material is firred at a temperature of 1000 °C.

Which brick can be used for the stove

There are different specifications for the brick used to lay out the different furnace sections.In the furnace, maximum temperature stresses take place. There is a possibility of 1200 °C. The graphs of temperature during firewood burning with varying wood relative moisture and air excess coefficients (α) are displayed in the figure below:

Not all bricks can withstand this kind of heat without breaking. Consequently, in order to install furnace space, a brick with the highest possible heat resistance is needed. Usually, this is a brick with chamotis.

In cast -iron stoves, a significant part of the heat secreted during the burning of firewood is transferred to the steam room of the steam room directly through the walls. In this case, the temperature of the outgoing gases is quite low-not more than 300-450 ° C.Unlike cast -iron stoves, in the brick stove, much less heat is transmitted through the walls of the furnace, due to the much lower thermal conductivity of brick. Therefore, the temperature of the outgoing gases in it is much higher and reaches 800-900 ° C. As you yourself understand, the constructive of the chimney in this case should have much higher heat resistance. Therefore, in brick stoves for the installation of gas traders, heat -resistant ceramic, full -bodied brick is most often used.

The main indicators of the quality of the stove material

Nowadays, a wide variety of furnace products are produced. It’s common to hear the phrase "clinker brick." Clinker is the German pronunciation of the word brick. As a result, "brick brick" is how the combination of clinker and brick sounds. This mistake has been firmly inserted into the building material designation.

Acquire specific varieties of complete briquettes for installing a stove or fireplace. Then, only samples utilized in residential construction will be taken into account. There are four types of brick used for stoves and fireplaces:

• quartz, made from a mixture of quartz with a slight addition of clay with subsequent firing;
• With a high carbon content, it is obtained by pressing graphite or coke, used for laying domain furnaces, their lining;
• Magnesia-ledge brick is used in metallurgy for laying the lining of steel-melting furnaces;
• Shamotnaya represents a mixture of quartz and heat -resistant clay, samples are further exposed.

Various stove brick varieties.

Chamotis brick is frequently used for masonry in furnaces and fireplaces because of its refractory and refractory qualities. The entire material is used to construct the furnace.

The following characteristics of a full-bodied stove brick:

• a high degree of heat resistance, for a long time, without losing resistance, withstands a temperature of 1000 ° C;
• low thermal conductivity, when heated, it accumulates heat and retains it for a long time, this warmth is heated by the home;
• high heat resistance, the ability to withstand repeated periods of heating and cooling.

The fire is located in a chamotte that is part of the stove’s layout. The best brick for the furnace is red brick. Its superior physical qualities are therefore very significant. When installing a stove, one typically selects a brand from a range of 100 to 200.

How can one avoid becoming lost in the assortment of products and accurately determine which brick is better to use? Make sure Saman is recommended for your construction and ask the seller for a certificate. Furthermore, a method exists for identifying both overt and covert flaws and deficiencies. Buying the desired product will be made easier by these suggestions.

The dimensions of the fire brick red and chamot

Two primary varieties of red brick are used for laying fireplaces and stoves: fireproof refined and basic stove.

1. Red is designed for a temperature of about 1000 degrees Celsius. For this material, frost resistance is important – especially for laying summer house stoves that are heated irregularly. The size of the red stove brick:

• length – 250;
• width – 120;
• Height – 65 (mm).

The following specifications should be met by a refractory:

• length – 250;
• width – 123;
• Height – 65 (mm).

This type of material is frequently used to cover the interior surfaces of furnaces or entire stove rows that are subjected to the highest temperatures.

1. Shamotnaya withstands a temperature of up to 1,500 degrees, according to GOST, two main brands of brick Sha and Shb are distinguished, their difference consists in the composition. The figure in the marking indicates the overall dimensions. Mostly Sha:

• length – 230;
• width – 114;
• Height – 60/65 (mm).

• length – 250;
• width – 124;
• Height – 65 (mm).

The stove brick’s standard dimensions include a Leshada. Up to 1200 degrees, a ceramic type with refractory is frequently used when driving the furnace’s exterior:

• length – 250;
• width – 120;
• Height – 65 (mm).

The chamotum species works well with the entire stove because of its color and view, which let you design a lovely exterior without using the facing ceramic brick.

1. The most popular for the structure of the furnaces is the Vitebsk brick (GOST 530-95) with parameters:

• length – 250;
• width – 120;
• Height – 65 (mm).

Thus, it is important to consider a material’s strength, size, weight, thermal conductivity, resistance to frost, and marking—which indicates the maximum load that can be applied to the goods—when selecting it for a furnace’s structure. This building material’s surface should be free of visible damage and cracks.

Make sure you check it to the empty space within; a hammer struck does not cause it to become deaf. Additionally, the form must be accurate, with each brick having the same size. This type is meant for masonry in key locations, so it is not permitted to be married in any way. The stove or fireplace will not operate properly if the material is not chosen correctly. You can be sure that your house will always be warm and cozy if you have a good stove brick.

This building material should have a flawless surface free of visible damage and cracks. Make sure you check it to the empty space within; a hammer struck does not cause it to become deaf. Additionally, the form must be accurate, with each brick having the same size. This type is meant for masonry in key locations, so it is not permitted to be married in any way. The stove or fireplace will not operate properly if the material is not chosen correctly. You can be sure that your house will always be warm and cozy if you have a good stove brick.

Choosing brick by appearance

When purchasing a brick, you should consider its manufacturing quality in addition to its density and brand. To accomplish this, closely examine a few stones from the gathering.

The building materials’ edges ought to be smooth and free of potholes. The area has been somewhat rounded by the stone of the Borovichi plant.

Check the corners; they should measure ninety degrees. Measure the stone’s length and width; a maximum deviation of 1.5 to 2 millimeters from the manufacturer’s stated dimensions is permitted.

To assess the internal structure of the stone, ask the seller to show you a chopped sample. Chips in good material should be painted on the whole surface uniformly. The presence of spots and the uneven coloring of the chip indicate that the internal structure is not homogeneous, which translates to unequal strength.

An additional means of verification could be to place a non-struggle object, like a hammer, on the stone’s widest edge. The hammer will bounce with the ringing if there are no internal cracks in the brick. A dull sound produced by a blow indicates faulty material.

If you were to drop a brick, high-quality would sprinkle into multiple large portions rather than high-quality into tiny pieces.

Request documentation from the seller attesting to the brick’s compliance with the GOSTs. GOSTs and their decryption must be indicated in the papers. Additionally, it should be mentioned that bricks can be used to build furnaces.

Manufacturers

Brick "Borovichi" (g. Borovichi, Nizhny Novgorod region)

M250 red brick resists frost well. It has been freely available for purchase in construction markets since 2011. There are three working surfaces to the material. The product has rounded edges. The material is particularly well-liked in the construction industry because it offers the perfect balance between excellent quality and reasonable cost.

Regretfully, the manufacturer permits the production of subpar replicas. Certain products have size deviations of up to 1 cm from the norm, which can be quite noticeable. In order to choose premium products that are sufficient for laying the furnace, it is advised that you order products with a margin. We advise enlisting the assistance of a knowledgeable expert. If not, you will have to file the building material and create excessively thick seams because the sizes are not standard, which will change how the heating device looks.

Brick "Vitebsk workshop 1"

M200 is the brand name for Red Brick’s strength. Due to its relatively low resistance to frost, this material is not recommended for use in high humidity environments or for laying outer walls. The brick has two edges that are sharp for working. No appreciable variations exist in the sizes. It should be mentioned that Vitebsk bricks are priced very reasonably.

Such a product is now widely available in specialty stores. Although the fireboxes made from this building material are not advised, the furnaces laid using it are excellent. It is sufficient to come into contact with an open brick flame for a year. As a result, this material can be used in conjunction with chamotum-type products. The chimney’s external components cannot also be installed using this product.

Brick "Vitebsk workshop 2"

This red brick has the M180 m200 brand on it. Frost resistance is comparable to that of earlier models. The material is only appropriate for covering furnace components that are hidden because it lacks aesthetic distinction.

Brick chamotum (fireproof)

Such products are produced by numerous Russian factories. Everybody is unique; there are excellent samples and incredibly bad ones. Furthermore, there is little difference in the price. A superior chamotum brick ought to possess a consistent cream color, a high density, and crisp edges. Although the product comes in Sh8 standard size, manufacturers offer different specifications and forms.

The main purpose of chamotis brick is the laying of furnaces or internal elements of fireplaces. But you can not be limited only to hot parts of the devices, because such material is often used to build the entire furnace.

Stove "bread chambers," which are dedicated areas where bread can be baked, are becoming more and more common. Chamotomes are used by unskilled specialists for their arrangement. It is definitely not advised to do this. Brick that is fireproof is a byproduct of the chemical industry, and food contact with it is not recommended at all.

Brick Lode

This brick is red and robust, with the strength brand being M500. Latvia produces goods. The material is excellent for outside work because of its high resistance to frost. features three work surfaces, edges, and slightly rounded corners. The producer provides a variety of brick shapes, including semicircular. These products have a very appealing appearance, which makes them popular for facing work.

What brick is suitable for the furnace

Typically, the furnace’s layout consists of a red ceramic brick for the working area and a smooth, even surface for spoons and pokes. They also develop the masonry characteristic based on which side faces outward.

The stoves are installed using full-bodied bricks that have no internal voids and a single height that matches the module of this particular brick type. There are variations in module types and attributes. Bricks cannot be used for a single stove made of multiple modules because the seams cannot be correctly laid and the structure will not be sturdy. In severe situations, the firebox is constructed using the brick from another module since thermal deformations already require it to be incorporated into the design as a block.

Which brick can be used for the stove

Completely unfit for use in the stove’s construction is silicate, unbroken raw, and cast with a Schliker castle. Because cheese is hygroscopic, the breath will cause the oven to collapse. The first is not thermal; rather, he conducts heat very well. In the latter case, the connecting element crumbles during the furnace process due to constant thermumrods rather than sintering.

clay red stove -brick

The choice of whether or not to make ceramic red bricks for the furnace’s construction is crucial. Plastic molding and semi-dry pressing are the two options. In the latter instance, the molding mass is split into pieces based on the required module after being passed through the profiled film prior to firing, forming a layer with the required configuration within the layer.

In the first version, the molding mass is placed in the mold along with a small amount of water, pressed, water is pressed out, and the mold is burned. More accurate sizing is possible with half-dry molding.

Only plastic molding is needed for ceramic products in the furnace. Water participates in chemical reactions in the fired material in addition to providing the mass of elasticity. To put it simply, pressed products contain a lot of pores because the clay is sinsed on dry. This module breathes like a running horse and is not very good at withstanding thermal loads.

Stove

Clay is the primary. In other situations, cement solutions are utilized to complete the furnace and, on occasion, as the foundation for the combustion portion of the heat-resistant composition. In both situations, clay-earth cement (GC40 or GC50) is used; however, due to its hygroscopic nature, it is not appropriate for exterior decoration work. Either Shamot sand or unique chamotis aggregates of the hustle are supplied to the fireboat for laying the firebox. There is no discernible difference between them in the heating and welding furnace.

Brick is fireproof

High-temperature pressing and firing are used in the construction of this module. Quartz is used very infrequently and bricks with chamotis mass are more commonly used in furnace construction. Because the masonry from the second is made in the contact sections with supporting steel embedded elements, such as pallets, beams, etc., it has a lower coefficient of thermal expansion. Nevertheless, it is not desirable to use quartz brick because it is costly and reactive to substances that have an alkaline or acidic reaction, and it is strictly forbidden to install loaded metal in the furnace.

Clinker brick

It is created by firing clinker, a unique clay-based composition, at a high temperature. This is a typical specially burned brick, for the most part. It is thick, dark, and frequently has dried jogging colors on its spoons.

It is very durable, has a high thermal conductivity, and has a thermal resistance of roughly 1200 degrees. It is quite frosty because there are hardly any pores in it. Most chemicals don’t fear them; this is entirely consistent with ceramic red brick. Since roads are costly and their thermal resistance is inferior to that of chamot, they are not frequently used in the construction of furnaces.

Kinds

Which kind of brick works best for the furnace? M-150 brands of ceramic bricks are a suitable material for the furnace’s construction (the benefits and drawbacks of ceramic bricks are discussed here). However, it is preferable when the structure’s masonry is composed of components from multiple manufacturers. There are multiple varieties of a single refractory brick. Every species has unique physical characteristics, including weight and size.

Learning about the refractory materials used in furnace installation is a helpful reading exercise.

The stove brick’s dimensions are described in the video:

Red

The materials used to make this product are clay. Seventy percent of the composition consists of them. It is essential to follow these guidelines when purchasing such a product:

1. Knock a little and determine by sound its quality. If you hear a metal sound, then the test item is strong.
2. You can determine the quality of the product by its color. If this is a faded hue, then it does not fit.
3. Draw a strong blow to the red brick so that it crumbles. If dust has formed during this process, then a high -quality product.
4. If the surface of the material has a vitreous plaque, then this suggests that it was strongly burned. During the construction of the furnace, such a brick will not provide a clutch.
5. Using a hammer, break the product into 2 parts. If the color inside becomes darkened, then this indicates that the sample is burnt.

There are additional uses for red brick. The dimensions of the red brick basement are described in the link.

Front red and double silicate

For the first kind, adherence to geometry is crucial. Such materials are consistently used in a broad range of tones and hues. Regarding double silicate bricks, the degree of heating of the future structure should be considered when selecting them.

Regarding double silicate bricks, the future structure’s heating level should be considered when making your selection.

Learn how to paint the foam ceiling tiles.

View the patterned photo panels for the kitchen.

Ribbed floor slab measurements and costs can be found at http://Resformbuild.ru/Beton/Plim/Perekrytiya/Rebristye-Razmery-Gost.HTML.

Clinker

The most universal is discussed in this material. The furnace may be installed both inside and outside the home with this method. It offers the following benefits:

• impact resistance;
• high environmental friendliness;
• attractive appearance;
• wear resistance;
• not subjected to the difference in temperature indicators;
• Water resistance.
• long -term operation;
• Brick is able to "breathe".

In Russia, the process of producing refractory was first introduced in the 1800s. Steel was actively melted at that time. However, swimming is meant to happen in warm weather. It was vital to employ a material that could endure such a temperature range in order to solve the issue. Refractory clay varieties serve as the foundation for the manufacturing of refractory bricks.

It is additionally distinguished by the parts that comprise the furnace.

Thus, the materials listed below are unique:

1. Shamotic brick It has a large amount of clay in its composition. The simplicity of obtaining the product made it possible to purchase a large demand in the construction market for the product. It is actively involved in laying furnaces inside the house. To give brick porosity in its composition add aluminum oxide. The easier the brick, the more efficient it conducts thermal energy. With a qualitatively burned -in -theching brick, it is possible to get a yellow tint. You can see the weight of fire -guided chamotte brick.
2. Quartz obtained as a result of the connection of chamotte and quartz sand. Use it where there is a direct effect of fire. It has a granular structure. In the photo – quartz brick:
3. The main brick Receive when using lime-to-and-resistant masses.
4. Carbon The material is a pressed coke or graphite actively used in the construction of blast furnaces.

Place of furnaces

Homemade stove It makes sense to put it there, where drawing a chimney is more practical. Homemade roasting is typically done in the kitchen because it is safer and more convenient. If a furnace is required for cooking in the future, installing a chimney in the kitchen will be simpler. Tiles should be used to surround the homewall to prevent heating damage to the walls.

Stove for the bath Different entirely in terms of their features and arrangement. The warm water container is usually located inside the bath, and the furnace department is typically located in the dressing room.

It doesn’t really matter what kind of material was used to build the bath; the brick should be able to withstand high temperatures. Its absence of chips and integrity violations is essential.

Stove on the street Install in private homes or dachas. They can take the place of the dinner plate. High-strength bricks that can withstand high temperatures must be used to build the street stove. A street furnace should not be used with porous, low-grade brick that is also broken or deformed.

Take note! Bricks that are not uniform in size, have chips and bumps, or lack markings cannot be used. Additionally, the material that was improperly stored is unfit for construction.

In the world of home heating and insulation, brick stoves stand out as timeless classics, blending charm with functionality. These sturdy structures not only provide warmth but also add a cozy ambiance to any space. When it comes to choosing the right brick stove, understanding its dimensions, characteristics, and user reviews is crucial. The dimensions of a brick stove vary depending on its design and intended use, but they generally fit snugly into most living spaces without overwhelming them. Characterized by their durable construction and efficient heat retention, brick stoves offer reliable heating throughout the colder months, often surpassing the performance of modern heating systems. Exploring user reviews can provide valuable insights into the practicality, ease of use, and overall satisfaction with a specific brick stove model, helping homeowners make informed decisions tailored to their needs and preferences.

Types and sizes of stove bricks

It is crucial to include specifications like a long service life, a high heat return, and ideal furnace dimensions when building the furnace. To accomplish them, using a specific stove brick is advised.

It is crucial to take physical characteristics into account in addition to sizes when making your selection. When slugs have well-defined structures, distinct layouts, and do not exhibit any obstructions in the near-term environment, and even when they produce high-quality output, you can be confident that the developed slugs will last a long time and be of high quality.

Which type of brick is ideal for the furnace? M-150 brands of ceramic bricks are a suitable material for the furnace’s construction (the benefits and drawbacks of ceramic bricks are discussed here). However, it is preferable when the structure’s masonry is composed of components from multiple manufacturers. There are multiple varieties of a single refractory brick. Every species has unique physical characteristics, including weight and size.

The stove brick’s dimensions are described in the video:

The materials used to make this product are clay. Seventy percent of the composition consists of them. It is essential to follow these guidelines when purchasing such a product:

1. Knock a little and determine by sound its quality. If you hear a metal sound, then the test item is strong.
2. You can determine the quality of the product by its color. If this is a faded hue, then it does not fit.
3. Draw a strong blow to the brick so that it crumbles. If dust has formed during this process, then a high -quality product.
4. If the surface of the material has a vitreous plaque, then this suggests that it was strongly burned. During the construction of the furnace, such a brick will not provide a clutch.
5. Using a hammer, break the product into 2 parts. If the color inside becomes darkened, then this indicates that the sample is burnt.

There are additional uses for red brick. The dimensions of the red brick basement are described in the link.

Front red and double silicate

For the first kind, adherence to geometry is crucial. Such materials are consistently used in a broad range of tones and hues.

Regarding double silicate bricks, the future structure’s heating level should be considered when making your selection.

View the patterned photo panels for the kitchen.

Clinker

The most universal is discussed in this material. The furnace may be installed both inside and outside the home with this method. It offers the following benefits:

• impact resistance;
• high environmental friendliness;
• attractive appearance;
• wear resistance;
• not subjected to the difference in temperature indicators;
• Water resistance.
• long -term operation;
• Brick is able to "breathe".

In Russia, the process of producing refractory was first introduced in the 1800s. Steel was actively melted at that time. However, swimming is meant to happen in warm weather. It was vital to employ a material that could endure such a temperature range in order to solve the issue. Refractory clay varieties serve as the foundation for the manufacturing of refractory bricks.

It is additionally distinguished by the parts that comprise the furnace.

Thus, the materials listed below are unique:

1. Shamotic brick It has a large amount of clay in its composition. The simplicity of obtaining the product made it possible to purchase a large demand in the construction market for the product. It is actively involved in laying furnaces inside the house. To give brick porosity in its composition add aluminum oxide. The easier the brick, the more efficient it conducts thermal energy. With a qualitatively burned -in -theching brick, it is possible to get a yellow tint. Here you can see the weight of refractory chamotis brick.
2. Quartz obtained as a result of the connection of chamotte and quartz sand. Use it where there is a direct effect of fire. It has a granular structure. In the photo – quartz brick:
3. The main brick Receive when using lime-to-and-resistant masses.
4. Carbon The material is a pressed coke or graphite actively used in the construction of blast furnaces.

What type of brick to choose

In addition to determining which brick and which brand are used for laying furnaces, let’s attempt to comprehend its types, features, and application boundaries.

Types of brick

Initially, this product ought to be classified according to subspecies based on the raw material used in its production:

• ceramic. It is made from a mixture of various clays by firing;
• silicate. consists for the most part made of sand and lime, plus a small percentage of additives. The resulting mixture is made hard not in the fuel furnace, but in the autoclave. By adding the pigment, you can get a product of any necessary color.

Let’s be clear about one thing: according to the dictionary used to explain, a brick is a bar made of burned clay mixture. These words indicate that it is silicate and not brick at all.

The stovers and the builders themselves demarcate the distinction between the two kinds of brick. Furthermore, GOSTs vary on them as well. As a result, ceramic bricks will be the subject of our main speech.

Clinic types according to application areas:

• Private full -bodied brick – in fact, the construction brick itself, from which the entire internal masonry is made;
• facial – he is finishing – they make parts of the end of the finished structure to the eye. It is made more neatly, homogeneous color, with more clearly expressed and even faces. It is often hollow, to maintain heat.

Face brick examples

Types of stove brick

1. Association.
2. Strength.
3. Beautiful appearance.

The main brick (lime-magnesis)

A unique type of brick used in high-temperature laying furnaces is called lime-magnesia. Rarely is the material used in home settings.

Shamotic brick (clay -earth / fireproof)

• Shortened and elongated blocks.
• Shaped, complex and large -block.
• Special, complex configuration.

1. High price.
2. Specific appearance.

Explains the dimensions, density, and composition of the refractory needed for brick. The masonry’s limiting thermal loads are calculated in accordance with GOST. The heat resistance and acid resistance of ceramic brick are reduced by any compositional abnormalities.

Quartz brick

Carbon brick

The use of bricks that former

• The use of bricks with cracks – masonry can only be performed only if the outer wall is planned to be completely plastered.
• Burned brick – use is strictly prohibited. Clay overwhelming, leads to a decrease in the ability of brick to withstand the thermal load.Poor brick is easy to check with a hammer. When hit, the surface will be ringed. In the same way, the density of brick and the absence of internal microcracks are determined. If the sound is deaf, the material for laying the furnace is not suitable.

Weight of red brick: 3.7 kg. A mass reduction of more than 300–500 grams suggests that the masonry material is of insufficient quality.

Which brick can not be used for laying the furnace

• Silicate brick – in the production process, lime and other additives are added to the composition. During heating, the silicate emits harmful impurities into the room. After a few furnaces, masonry begins to crumble and crack.
• Decorative brick – can be used limited when lining the furnace made from chamot. If the masonry is performed correctly, a strong thermal load will not be provided on the surface, the surface heating will not exceed 50-60 ° C. Use facade facing brick for laying a stove, you cannot.
• Construction ceramic brick – suitable for the manufacture of structures and nodes with low heating intensity. For the furnace and chimney, it is impossible to use construction brick.
• Hyperpressed brick – only products made by the method of molding are suitable for the furnace. The pressed composition, in view of the features of production, is completely losing moisture during firing. Pores are formed inside, which affects strength and quality.

Brick stoves combine traditional craftsmanship with contemporary efficiency to provide a home’s timeless charm and efficient heating solution. Their sizes range greatly, from smaller, ideal for tiny spaces to larger models that can heat entire rooms or even whole houses. Because these stoves are available in a variety of sizes and styles, homeowners can choose the one that best suits their requirements and design tastes.

The remarkable heat retention capabilities of brick stoves are among their primary features. When heated, the thick bricks retain and release heat gradually and uniformly, giving long-lasting, pleasant warmth. This not only makes the space feel comfortable, but it also helps save energy because less fuel is required to keep the temperature where it is.

The longevity and robustness of brick stoves is another benefit. These fire-resistant stoves are made to endure high temperatures and frequent use because they are constructed with durable materials like refractory mortar and clay bricks. For homeowners looking for long-term heating solutions, they are a dependable investment because they can last for decades with the right care.

User reviews frequently emphasize how adaptable and dependable brick stoves are. Many value their capacity to burn a range of fuels, such as coal, wood, and even pellets, which offers versatility in terms of fuel availability and choice. Furthermore, people prefer the soft warmth that radiates from these stoves because it feels more cozy and natural than the dry heat produced by some other heating techniques.

In conclusion, brick stoves are a popular option for home insulation and heating because they provide a strong blend of durability, efficiency, and aesthetic appeal. A brick stove could be the ideal addition to your house, whether you’re looking to add a little rustic charm or a dependable heating source for chilly winter days.

Video on the topic

How to cut refractory bricks?

Brick with cracks. How not to get stove brick when choosing

Brick brick brand M-200: review of different manufacturers

Construction brick. Types, properties, brick brands

What is furnace brick?