Boiler control through the phone using GSM module: Principle and features

The way we manage our home heating systems is changing as technology continues to permeate every part of our lives. Imagine being able to change the settings of your boiler from anywhere in the world with a few taps on your smartphone. This seemingly futuristic convenience is now a reality because boiler control systems have integrated GSM modules.

In the past, you could either use a thermostat in your house or manually adjust the settings on the boiler itself. Although these techniques work well, they don’t offer the convenience and flexibility that modern living necessitates. You can use your smartphone to remotely control your heating system if your boiler is equipped with a GSM module.

How then does it operate? The GSM module essentially serves as a conduit between your smartphone and boiler. No matter where you are, you can send commands and receive status updates thanks to the wireless communication between the two devices. You have complete control over the heating system in your house, regardless of whether you’re at work, on vacation, or just relaxing on the couch.

Remote schedule and setting adjustment is one of the main benefits of using a GSM module for boiler control over the phone. Bid farewell to coming home to a chilly house after a demanding workday. With the help of this technology, you can set your boiler to start up right before you arrive, guaranteeing that your home will always be perfectly heated.

In addition, using a smartphone to control the boiler can save energy and provide comfort. Before heading out for a weekend getaway, did you forget to turn off the heating? Not a problem. Just open the control app on your phone and make the required changes. This not only avoids wasting energy, but it also lowers your long-term utility costs.

Device and principle of operation of the GSM module for the boiler

Since the GSM module and mobile phone share the same communication protocol, they are actually similar devices.

The following is the device’s operating principle:

  • Using a SIM card, the device is connected to the GSM network;
  • then it is connected to the smartphone;
  • From the gadget, you can give a signal to the device;
  • The module after receiving the signal changes the settings of the boiler (increases or lowers the temperature, turns on, turns off).

The structural components of the module itself are as follows:

  • Thermostat. Controls the temperature of the boiler and gives the signal to the owner’s smartphone about its change. Many models allow you to use other warning methods (light, sound signals).
  • Fasteners. Base for installation of the device. Usually designed for installation on a vertical wall.
  • power unit. The module elements are not designed to work with the standard voltage of the household electric network. Therefore, they need a power supply. Usually the operating voltage of the device is 9 V or 12 V.

  • Antenna. Allows you to receive signals in the GSM range, with which the module is controlled.
  • Sensor. Determines the temperature of the boiler and transfers the received information to the thermostat for further processing and notification of the owner. Most sensors are able to work at t from -50 o C to +99 o C. This allows you to use them in almost any conditions.
  • Reserve power source. Is a battery or battery. Designed in case of turning off the supply of electric energy or breakdown of the power supply. Provides prolonged autonomous operation of the device with full maintenance of the functionality.

One more mysterious GSM module to operate the boiler-SIM card. Ultimately, the device establishes a connection to the mobile network through it. However, it will need to be bought separately. Rarely do manufacturers include a SIM card with the appropriate tariffing in the kit.

Working modes

The majority of current device models have two modes of operation:

  • Auto. The owner of the device sets the necessary settings, and the device works in accordance with them. For example, you can set a shutdown of the boiler when a certain temperature reaches and re -turn on after cooling.
  • Manual. In this case, management is carried out completely manually. To do this, use a smartphone.
  • Anxious. In fact, this is the same automatic mode. But with one reservation – the system notifies the user in the case of emergency situations (for example, an unexpected increase in temperature in excess of permissible values or spontaneous disconnection of the boiler).

You can mix and match modes on certain models. For instance, you can incorporate notifications of freelance opportunities and operate the boiler manually at the same time.

Which boilers work with

It is necessary to ascertain whether the heating boiler allows for the connection of such a device before purchasing the module. Not all models have this kind of support.

Autonomous systems that have forced coolant circulation—that is, ones that have a pump—are appropriate for connecting the device. In this instance, processing the security system is required to stop breaches in the module’s connection points.

The module can be used with different kinds of boilers if it has an air temperature sensor. It is true that it will function a little less accurately because the measurement of t is done outside the system.

Features of operation in various types of boilers

The device’s operating parameters for various heating system types are as follows:

  • When used in electric boats, it is possible to track voltage. The device can also give a short circuit signal.
  • When using several boilers at the same time, the device can generalize information from them. This is relevant when used in production or in households.
  • In pellet boilers working on wood granules, the module can adjust the supply of fuel to the system.

When you need a module

When the home’s owner is gone for an extended period of time and it becomes necessary to maintain a specific temperature or turn on the heating in a timely manner, a GSM module is needed to control the boiler.

When this is required, some of the most frequent circumstances are as follows:

  • Long departure. The owner of the house goes on a business trip or on vacation. In this case, you cannot completely turn off the heating – the system freezes. At the same time, there is no one to manage the boiler at home.
  • Giving with a heating system. If a heating system is installed in the country house, then when the boiler is turned off in the cold season, it will freeze. To allow this, you can drain the system. But then it will be impossible to come to the country in winter because of the cold that will stand in the house. Solving the problem-remote maintenance of low plus temperature to prevent freezing using GSM module.

How to choose a GSM module

The following factors should be considered when selecting a GSM module:

  • Convenience of management. Everything is clear with the smartphone – the device is controlled using the application. But if the owner of the house, the interaction with the device occurs under another. The most common control methods are two: physical buttons and touch screen. Models with the second option are more convenient (they show more information about the operation of the heating system). But they are more expensive. Once, there are such models that are controlled exclusively from the smartphone. But you should not buy them – using such devices is not very convenient.
  • Equipment. The basic set of delivery of the module is an antenna, an internal thermal attemptor, fastener and the device itself. But there are models with extended equipment. It can include external temperature sensors, regulatory determinants and other components. The kit is selected based on specific tasks. For example, if the goal is to ensure maximum safety, it is better to take an option with a gasket sensor. And if you just need to control the boiler remotely, the minimum equipment is suitable.

  • The number of channels. The more of them, the more users can control the device. In the cheapest models, two channels. But if there are three or four households, this option is completely unsuitable. Therefore, the more people in the family, the more channels should be on the module. It should be borne in mind that multi -channel devices will cost more.
  • The capacity of the reserve battery. The larger it is, the longer the device is able to work in autonomous mode. It must be borne in mind that you should not overpay for a capacious battery where there is no need. It is relevant only in the case when in the village where the house is located, electricity is often turned off for a long time.

The boiler’s GSM module is an example of a device where price and quality are directly correlated. More money buys you a more powerful processor (more settings can be set), better control, and more convenient richer equipment. Saving therefore always comes at the expense of the device’s comfort of use.

How to connect a module yourself

The boiler and module are connected using an approximately constant algorithm. The type of device makes no difference.

In order to link the device, you must:

  1. de -energize the boiler;
  2. remove the casing;
  3. attach or solder the module wires to the boiler board in accordance with the instructions;
  4. install a SIM card, antenna, sensors;
  5. Put the casing of the boiler back;
  6. turn on the module and synchronize it with a smartphone;
  7. resume the supply of electricity.

The best models of GSM modules for remote control of heating boilers

Think about a few of the current device models that are on sale right now.

Kotelik 2.0

A straightforward, affordable, and dependable model of Russian manufacturing. The product ranges in price from 5,000 to 6,500 rubles.

Consists of the subsequent elements:

  • GSM block with antenna;
  • control Panel;
  • sensor.

There are four settings buttons and a broad monochrome display on the control panel. Good signal quality is provided by a GSM antenna.

The primary flaw in the apparatus:

  • Control using SMS teams (the application is absent). This is not very convenient.

The primary benefit of the pot 2.0 is:

  • the possibility of fine adjustment of the temperature of the heating system. It can be changed up to 0.1 ° C.

Telemetric 3

A small and handy GSM module. features a sizable monochrome liquid crystal display that is quite educational. Three physical buttons, situated beneath the screen, are used for management.

Universality. It can be linked to any other device (like air conditioning), in addition to the boiler.

Absent an external antenna in its entirety. It is possible to install third-party software, of course. However, these are extra costs. which, given the high cost of the device (roughly 9,000–10,000 rubles), are wholly inappropriate.

Optima-1 heat metro

Efficient, dependable, and user-friendly apparatus. consists of two GSM-thermistor modules. possesses the ability to operate multiple boilers simultaneously. You can connect to the alarm system as well.

There is programming available for use in automatic mode for the ensuing seven days. You can use the model in below-freezing weather thanks to the freezing-resistant feature.

The owner’s smartphone provides a consistent signal that is nearly completely uninterrupted because of the remote antenna’s availability.

An interface lacking sufficient information. This place does not have a display. LEDs are used as indicators instead. It is evident that even with their assistance, it is challenging to reflect all the pertinent information.

The device ranges in price from 8,500 to 9,000 rubles.

Controlling your boiler through your phone via a GSM module brings modern convenience to heating management. By integrating this technology, you can adjust your boiler settings remotely, providing flexibility and efficiency. The principle is simple: the GSM module connects your phone to the boiler system, allowing you to send commands and receive real-time updates from anywhere with cellular service. This feature is particularly handy for adjusting heating schedules based on your daily routine or unexpected changes in plans. Additionally, it enhances energy efficiency by enabling precise control over when and how your boiler operates. Overall, integrating a GSM module into your boiler system empowers you to manage your home"s heating effectively and conveniently, ensuring comfort while optimizing energy usage.

We will summarize

Remote heating boiler control is possible with a GSM module. It enables you to control the system’s temperature and turn it on and off when needed. The gadget is appropriate for people who take extended absences. The functionality of various models varies. Generally speaking, the lower the price of the device, the fewer functions it has and the worse the equipment. Based on the tasks involved, the best option is chosen.

Principle Features
Allows controlling boiler remotely via phone Convenient for adjusting temperature from anywhere

The ability to use a GSM module to control your boiler via phone is revolutionary for home heating control. No matter where they are, homeowners can now have never-before-seen convenience and control over their heating systems thanks to technology. They can ensure efficiency and comfort by simply using their smartphones to change the temperature in their homes.

The integration of GSM modules, which allow communication between the boiler and the user’s phone, is one of the fundamental ideas underlying this technology. This implies that homeowners can use an SMS command or a specialized app to remotely access their boiler system. Those with hectic schedules or erratic schedules will particularly benefit from this degree of accessibility, as it makes it simple for them to control their heating system while on the go.

Furthermore, boiler control via phone offers features that go beyond ease of use. Homeowners can save energy and lower utility costs by remotely monitoring and adjusting the heating system. For example, they can turn down the temperature if they will be gone from home for longer than they had planned in order to prevent overheating an empty house. This is in line with initiatives to cut energy use and lessen environmental effect in addition to saving money.

Additionally, by enabling users to remotely monitor their heating system, phone-based boiler control improves home security. Maintaining a sufficient temperature in the house is crucial in colder climates to avoid problems like frozen pipes, which can result in expensive repairs and water damage. By using remote access, homeowners can make sure that their home is safe and comfortable even when they are gone for an extended period of time. They can promptly identify and fix any anomalies in their heating system.

To sum up, the way homeowners communicate with their heating systems has been revolutionized by the incorporation of GSM technology into boiler control systems. This innovation provides unmatched energy efficiency, convenience, and peace of mind. We may anticipate more advancements in home heating control as technology develops further, which will eventually result in more secure, sustainable, and comfortable living spaces.

Video on the topic

GSM Relay Sonoff G1.MOB electrical appliances management.Internet!!!

Ariston boiler control using GSM module

Remote control of the boiler room

Review of Android apps for GSM module "Cauldroumina.OK"

What type of heating you would like to have in your home?
Share to friends
Sergey Ivanov

I like to help people create comfort and comfort in their homes. I share my experience and knowledge in articles so that you can make the right choice of a heating and insulation system for your home.

Rate author
vDomTeplo.com
Add a comment