Automatic tap Maevsky

Heating and insulation are essential components of a well-maintained, energy-efficient home. These aspects of home maintenance are crucial, from keeping us warm during the cold winter months to making sure our energy bills stay within reasonable limits. But there’s one part that’s frequently missed but can significantly improve our heating systems’ efficiency: the Maevsky automatic tap.

Designed to make bleeding radiators easier, the Maevsky automatic tap provides homeowners with a practical fix for a frequent heating problem. Air can get trapped in radiators in many conventional heating systems, decreasing their efficiency and leading to uneven heating throughout the house. Manually bleeding the radiators takes time and can be difficult at times; it calls for the use of tools and close attention to detail.

Put in the automated tap. Maevsky is a straightforward but clever gadget that automatically releases trapped air from radiators. This little valve can be easily installed at the highest point of each radiator in your house to remove any built-up air without requiring any manual assistance. By doing this, you not only save time but also guarantee that your heating system runs as efficiently as possible, keeping your house warm and your energy costs under control.

What is the mechanism behind Maevsky’s automatic tap? It functions essentially as a self-regulating valve that opens on its own when air builds up in the radiator and shuts off when the air is released. This implies that you can set it and forget it, letting the gadget take care of your heating system’s ideal air pressure without requiring your intervention.

Moreover, the Maevsky automatic tap installation procedure is quite simple, allowing homeowners of all skill levels to utilize it. You can equip your radiators with this innovative device and take advantage of year-round improved heating efficiency with just a few basic tools and basic plumbing knowledge.

Feature Description
Automatic The tap has an automatic function, eliminating the need for manual operation.
Maevsky Named after its inventor, the Maevsky tap is designed for efficient drainage of air from radiators, improving heating efficiency.

Maevsky faucet: design, principle of operation and installation schemes

The feature of water heating mains is distinctive. Air cushions continue to occupy a portion of the system when the pipelines are filled with water. In these situations, normal water heating operation is not available, necessitating the manual removal of air from the pipelines.

A unique device for manual (automatic) air removal, the Maevsky valve aids in streamlining and securing the process.

Device and operating principle of the device

Mayevsky valves, which are well-known to many, were operated by a locksmith screwdriver or a unique key. In actuality, these products cannot be referred to as automatic devices.

Designers have made minor improvements to the current Maevsky valve prototypes, which are automatically operating air vents.

Automatic models operate independently of outside assistance. However, there are various constructive Maevsky valve variations used in plumbing practice:

  • straight rod manual;
  • angle rod manual;
  • float vertical automatic.

The only real distinction between automatic and manual designs is that the former can only be mounted vertically, while the latter can be mounted in nearly any orientation.

Traditionally, manual designs are affixed directly to the radiator panel or battery body. Generally speaking, automatic air vents are made to be installed on the mains in difficult-to-reach heating system maintenance locations.

The Maevsky valve operates on the basis of the interaction of its most basic components. In reality, manual designs are represented by a standard needle valve. The components of this kind of valve are:

  1. Metal body.
  2. Stem with threads and through grooves.
  3. Hood with air outlet channel.
  4. Rubber ring seal.

The material that is typically used to manufacture Mayevsky valves is brass. However, a different component of the system, the hood featuring an air channel, can be constructed from high-temperature polymers like capron and nylon.

The device’s bottom portion has an outer diameter that the brass body of the apparatus is threaded along. This portion of the body is used to screw the tap into the radiator plug’s seat.

How the manual faucet mechanism works

Everything is easy to understand. In its normal state, the control stem’s screw is tightened to the stop by inserting the needle part into the outlet opening’s ring casing. A wrench or screwdriver is used by the plumber (or homeowner) to unscrew the screw for two to three turns in order to release the system from the air lock in the radiator. The air enters the opened outlet hole first because of the significant density difference between water and air.

Additional air rushes through the rod’s longitudinal grooves and enters the space beneath the capronovy cover. The air mass is then released via the outlet channel. The plumber fastens the Maevsky faucet’s screw to the stop as soon as the air flow stops and water starts to flow. This brings the bleeding process to an end.

Since it is not possible to release the entire volume of air at once, the process is repeated on a regular basis.

Working principle of automatic Maevsky valves

The automatic valve, which is the Maevsky valve’s follower, operates in a slightly different way. An analogous product that operates automatically operates on a different principle from the manual standard. A cylindrical housing contains the automatic air venting valve. The cylinder contains the float mechanism installed within.

The float mechanism is attached to the needle rod via a set of levers. The stem in this design is positioned vertically. Its needle end functions as a valve to open and close the cylinder’s upper opening. There is an air/water inlet at the bottom.

The float becomes pressurized when there is water inside the vent cylinder. The valve’s needle portion is compressed by the pressure force. Consequently, the upper outlet port closes.

However, as soon as air enters the cylinder, the float’s force of water pressure is reduced, and the valve’s needle portion descends. The air is released through the aperture in the upper calibration. Water refills the cylinder as the air bubble pops. The "closed" position of the valve is determined by the float.

How to install the air venting mechanism

Manual A device that seals itself is the Maevsky valve. There is no need to use additional sealing materials because the product comes with a rubber O-ring.

Typically, radiator fittings (1 dm x ½ dm; 1 dm x ¾ dm) are installed in conjunction with this kind of air vent. Use a coupling wrench that is specifically made for working with fittings and plugs as an installation tool.

Maevsky valves, or air vents, can only operate under specific pressure and temperature conditions. The device’s technical specifications determine these values.

Features of the air ventilator that are technical

The following table displays the necessary functional properties:

Disturbances in the devices’ operation are not excluded during the process. Small debris carried by the coolant is a common cause of Maevsky faucets losing their efficiency. It is advised to perform basic maintenance if the faucet is clogged and no longer functional:

  1. Cut off the radiator from the system by shut-off valves.
  2. Empty approximately 1/3 of the water volume from the radiator.
  3. Remove the device from the battery casing.
  4. Clean the passage hole with a thin (non-metallic) sharp object.

Radiators are not always part of complete heating systems; some have plugs with pre-drilled holes for taps Maevsky. In these situations, they will need to construct the air vent terminals by hand. In this instance, no particular challenges are anticipated. Drilling a hole for the valve’s installation size and cutting the threads is all that is required.

A metal drill is used to drill the hole, and a tap is used to cut the thread. Naturally, the tap is precisely the right size, and the drill’s diameter is selected to be 1 to 1.5 mm smaller than the valve’s installation size.

Features of inclusion in the heating system

When air vent valves are installed, there are certain quirks involved in how they fit into the existing radiator plug bodies. Left-hand threads are typically used to screw in radiator plugs. Since the valve is screwed to the right, the plumber must use one wrench to tighten the plug and another to tighten the air vent at the same time. However, these are technical nuances, so it doesn’t hurt to know what unskilled buyers are thinking about them.

There are certain unique aspects to the air venting device installation scheme. Thus, in the event that the radiator system is built using the vertical device arrangement scheme, air-draining cocks are typically installed on the radiators on the topmost level.

However, the Maevsky cocks are positioned in the heating devices of the lower and upper levels in the parallel connection scheme, even with a vertical structure. Additionally, in the practice of plumbing, installation is typically carried out while accounting for the potential buildup of air in the system.

Every heating device in this scenario typically has an air vent if the heating system is installed using the horizontal scheme. Generally speaking, it is preferable to have valves that divert air on practically all heating system equipment. Those who are truly equipped are vulnerable to:

  • all heating batteries in the system;
  • compensators, bypasses and similar devices;
  • registers and coils
  • pipelines of the upper level of the heating system.

On towel dryers, some schematic solutions even offer the Maevsky valve placement. It should be noted that certain towel dryer models are available for purchase with the Maevsky faucet as the entry point.

Tips for the benefit of the case

It is advised to carefully examine the device layout before making a decision to purchase air removal devices.

Depending on how much access the equipment allows, taps Mayevsky appropriate modification must be installed.

Keyed models work better in situations where using a screwdriver is difficult, and automatic devices make sense in situations where using keys is difficult. Thorough examination will reduce costs associated with purchases and improve the effectiveness of device maintenance.

For instance, when compared to automatic air diverters, the design of manual devices is maximally simplified. However, experience has shown that dependability is ensured by simplicity.

In the event that the heating system makes use of cast-iron radiators, manual taps are regarded as more dependable than automated valves. Meanwhile, the quality of the metal (brass) used to make the air diverter has a major impact on the design’s dependability.

One may also discuss the experience of implementing Mayevsky valves in heating systems constructed with plastic pipes. Although this material is weak against hydrostroke, it can maintain a stable temperature and pressure quite consistently.

In these kinds of situations, installing a Maevsky valve in a pair with a safety valve improves system dependability. Generally speaking, taps should be used as stabilizers for schemes where the pressure stability is uncertain.

A vital component of any heating system’s technical components, air vents are straightforward in their design and simple to maintain. Deliberately removing the devices from the system may have detrimental effects, such as pipes and batteries defrosting in the winter. Mayevsky valves are unavoidable; one must only choose which ones are appropriate for a given system.

Why the Mayevsky valves are used. The network’s architecture and operating principle. Potential circuit designs for heating system installations. characteristics of the installation

For the "Heating and insulation of the house" website, the main thesis could be:"Ensuring effective heating and insulation in your home is essential for comfort, energy efficiency, and cost savings. Properly insulating your house helps retain heat during colder months and keeps it cool in summer, reducing reliance on heating and cooling systems. Additionally, investing in modern heating technologies can further optimize energy usage and decrease utility bills. By implementing these strategies, homeowners can create a more comfortable living environment while also reducing their carbon footprint."Regarding the article on "Automatic tap Maevsky":"Introducing the Maevsky automatic tap—a game-changer in home maintenance. No more hassle of manually bleeding radiators or dealing with messy valves. With Maevsky, the process becomes effortless and precise. This innovative device automates the task, ensuring optimal performance of your heating system with just a simple touch. Say goodbye to wasted time and frustration, and hello to a more convenient and efficient way of managing your home"s heating."

How to bleed the air or change the automatic Maevsky cock

Air builds up in the heating batteries at specific intervals.

The presence of air plugs in heating radiators impedes the flow of liquid, resulting in a zero coefficient of heat transfer.

Radiators become uncomfortable in the room because they are unable to warm up sufficiently.

Why do you need an automatic air venting device?

Folk artisans have always made every effort to find a solution to this issue.

The most sophisticated option was a spigot with a faucet welded to the very top point.

Although more techniques were developed, they were all unreliable and difficult to apply.

Bleeding the system of air is necessary to get it operating at maximum efficiency.

Using a Maevsky faucet to assist with this process is the most practical option (how to use).

The device’s first non-automatic model was created in the Soviet Union.

A specialized toolkit was required in order to operate the air vent.

These days, such designs are not in style.

An automatic Maevsky tap for heating radiators is available in contemporary plumbing supply stores.

The central heating system in a house can greatly improve the quality of life for its occupants at a relatively low cost.

The device, made in the classic version

The component features a tiny funnel attached to a small metal body (brass is the best choice).

The product has a threaded end for installation on the radiator aperture and a screw-attached nozzle at the other end.

How much do you know about using crimp fittings to join copper pipes? Read about the instruments required to accomplish the joining of separate water pipe sections in compliance with all regulations in this helpful article.

This page contains information on how to calculate bimetallic heating radiators correctly.

Installing the plug requires that there be no water in the system because it is mounted in lieu of the heater’s limiter.

The appliance has a sealing ring, which is required to guarantee the device’s tightness. Additionally, the cap is typically composed of nylon or plastic.

Air valves are typically composed of brass alloy, which is immune to corrosion.

Brass makes up the frame itself, and plastic sheeting is typically used to cover the top. There is a stainless steel needle valve located inside the product.

These mechanisms are available in a wide variety from various suppliers on the contemporary market.

In certain samples, the rotating cover’s aperture is situated right on top of the needle valve nut, while in other samples, the plastic frame rotates in a horizontal direction.

The internal device is determined by the concept of operation. The Maevsky faucet is fitted into a cap, which is a plug located at the top of the heating system or at the end of the radiator.

The locking element activates the mechanism when the needle choke, which is housed in the core, moves inside the working sphere.

One can manually adjust the locking screw’s position or use a Phillips screwdriver.

Many producers use square wrenches to finish their products.

The valve is much easier to adjust with it.

When it is difficult to reach the starting valve with a screwdriver or by hand, it will be very difficult to operate without it.

Occasionally, the batteries are tucked away in an awkward spot in the room (a deep alcove).

The idea of the air’s action provides an opportunity to comprehend the necessity of a Maevsky tap. Without it, unplugging the heating system can occasionally be exceedingly challenging and inconvenient.

Experts recommend installing a comparable device in every heating system.

When working on the air vent installation, the following guidelines must be followed:

  • if the coolant is supplied from the bottom to the top, the air valve can be installed only on the radiators of the upper floors;
  • when the house is made horizontal distribution, it will be advisable to install a Maevsky valve on each radiator.

The gadget is occasionally mounted on the towel dryer as well.

This article describes what wire to buy for semiautomatic stainless steel welding.

In this instance, a unique tee fitting should be used to position it vertically. The venting gap faces the wall from the opposite direction.

It’s necessary to release the trapped air:

  • as soon as you carry out work on the installation of the heating system.

Preliminary preparation

  • It is necessary to place a deep container directly under the valve and prepare a floor cloth so that you can wipe the floor with it if necessary.
  • Using a screwdriver or a special wrench, turn counterclockwise the device by one turn.

The air jet is released in this manner.

Turn the tap up one and a half turns if a lot of it has accumulated inside the radiator.

If this isn’t done, the liquid material may leak out into the atmosphere. The entire room will fill with water, but the plug issue won’t go away (for instructions on how to fix a heating pipe leak, click this link).

Design features

Version that is automatic and far more user-friendly than the traditional one. Its design is more elaborate.

The mechanism that takes the place of the bolt has:

The device’s bottom is where the outlet hole is situated.

The float begins to respond when the coolant level falls.

It slides down, releases the needle valve, and a thin trickle of air emerges.

The features of the automated version are as follows:

  • the automatics are determined by perpendicular location,
  • the device can operate without human intervention,
  • there is no need to put a basin to drain the liquid, because when the water level rises, the opening is closed automatically;
  • it can be installed on the "warm floor" system and in close proximity to the heating boiler;
  • elements of the mechanism are susceptible to the quality of the coolant,
  • high cost of the product.

Installing automatic on the city heating system’s pipes is not advised by specialists.

You don’t want to clean the device every month because you won’t be able to monitor the liquid’s quality.

Because of this, the gadget will eventually leak and could result in an apartment flood.

Frequent disruptions in the heating medium supply are one of the main characteristics of central heating.

Compared to an autonomous system, this one gathers a lot more extraneous air (read this article for information on using a heat pump to heat a private home).

Bleeding the air through the 2 mm hole will take a long time.

This also serves as justification for not adding an automated Maevsky faucet to vintage cast-iron radiators (for more information on contemporary heating radiators, see this article).

There are models with a brass frame for these purposes. This kind of detail can withstand temperatures as high as 150 degrees Celsius.

Systems using PVC pipes also have air vents installed with safety valves.

Installing a valve will stop hydrostroke from rupturing a delicate structure.

These models have shown their worth in central heating systems, where abrupt pressure changes occur frequently.

How to install in the radiator

All you have to do to install a Maevsky valve is screw the suitable model into the radiator cap located on the back of the water supply.

It is essential to choose the device such that the threads coincide because the values of the grooves on the products are standardized.

It is simple to drill a suitable hole with your hands on the cast iron plug. Drilling the opening from the inside must come first, followed by cutting the grooves from the outside.

An electric drill, a 9-millimeter drill bit, and a collared tap are required for this task.

Recall! The faucet has threads on the right hand, and the plug is threaded on the left. An adjustable wrench should be used to hold the plug in place during installation to prevent it from coming loose.

You ought to be aware! The Maevsky faucet’s plug will loosen as you screw it in. The restrictor is screwed more tightly when the air vent is unscrewed.

Use a specific rubber or silicone gasket when installing a device to reinforce the threaded connections.

Not using a paronite gland is advised.

Some plumbers wrap pipes in linen or use fum-tape, which stops leaks, but these are not required.

When making a decision, use caution.

Take a close look at the products; they ought to be flawless.

Installing inferior products will cause them to crack.

Recall! A lengthy period of inertia can cause the mechanism to jam.

The radiator limiter will then need to be changed in addition to the valve.

Compared to the conventional version, the automatic version is far more convenient to use. The heating system’s air is bled out using the yoke.

Air vents for radiators: automatic, manual, tap "Maevsky"

Air can build up in the heating system occasionally. This is not an issue for open systems (those with open-type expansion tanks) because it naturally escapes, but it must be removed for closed systems. Air venting devices are now an essential component of modern heating systems because open systems are becoming less common because they are thought to be less stable. Both manual and automatic models are available today. They differ in terms of design, material composition, and connection sizes. However, they serve the same purpose, which is to eliminate gases from the heating system.

Air is rarely found in systems that are well designed. primarily following filling or makeup. The suction occurs continuously if the layout is not quite successful. What in the system poses a significant threat to it? The worst part—in this instance, corrosion sets in, causing the system’s metal parts to rust and fail rapidly. An elevated decibel level is the second issue. The third issue is the occurrence of air jams. Because of this, the highest point of every system has automatic air vents installed.

This is the automatic air vent radiator. It costs roughly two dollars, is slightly bigger than the "Maevsky" tap, and eliminates the gases on its own.

Gases most frequently build up in radiator tops. Subsequently, the coolant circulation becomes worse. And as a result, only a portion of the battery heats up (the portion that stays cold depends on the type of connection). For this reason, every heating appliance (towel dryer, register, or radiator) has a manual air vent installed. The most popular tap in our nation is "Maevsky."

Why do radiators employ manual models? They are less expensive and require less room. However, there are contemporary, specialized versions of automatic devices that are merely marginally bigger. They are more expensive (the apparatus is more intricate), but the air is extracted on their own.

Where are the air vents for radiators installed? pipe-free in the radiator’s upper collector.

Which radiators should be fitted with gas vents

Installation is required for radiators made of aluminum. Hydrogen is one of the components that aluminum breaks down into when it comes into contact with coolant water. For this reason, it is necessary for these heating devices to have gas vents.

Installing on partially bimetallic radiators is preferred. They still have some aluminum-coolant contact, but it is much less than before. For this reason, installing a "Maevsky" tap is recommended.

These automatic air vents are angled and straight. They can be mounted on radiators as well, but the "pimple" needs to face upward.

In this sense, fully bimetallic radiators are safer because steel makes up their whole core. However, a lot of manufacturers stipulate that such a device must be present in their installation recommendations.

When used with older cast iron radiators, these devices are ineffective. Air removal from them can only be accomplished in conjunction with a sizable amount of coolant. Furthermore, neither of these devices—manual or automatic—is designed to handle this. In this instance, the air is vented using ball or standard valves.

The situation with tubular radiators and registers is similar to that of cast iron in that only taps function properly. Thus, installing air vents on them is absurd.

This tap is called a "Maevsky" faucet, or needle air vent valve.

Installing "Maevsky" cocks on steel panel radiators is required. The narrow diameter of the coolant circulation passages is the key point. Moreover, the heating medium’s flow will be obstructed in the event that an air lock forms. It will either stop heating entirely or partially. Only by emptying and re-filling the coolant can the plug be removed. For this reason, air release valves are typically included with panel radiators straight out of the factory.

Types and technical characteristics

There are two types of these devices based on the drainage method:

They have various diameters when they are made. 1/2" and 3/4" (half an inch and three quarters of an inch) are the most widely used sizes. Although 1/8", 1/4", and 3/8" are also found in nature, our systems do not make use of them. The most popular modifications are the half-inch diameter 1/2"; it is also known as DU 15 in another system of units. In this instance, the connection size in millimeters is indicated by the number 15.

Device for automatically and manually venting heating system gases

Important parameters exist in addition to diameters:

  • Operating pressure. In most models it is 10 atm, there are devices designed to work at 16 atm.
  • Medium type. There are air valves, there are those working with liquids. In heating systems are used working liquids or universal (both air and liquid).
  • Working medium temperature. They are more often found with a working temperature of 100 o C – 110 o C. There are those operating up to 150 o C.
  • Thread type: external or internal.

The technical features of air vents need to be customized for the particular kind of system being utilized. While choosing radiator devices powered by centralized systems, you must be aware of the pressure and temperature for your house (you can find this information in the Housing and Utilities Department, DEZ, Housing and Utilities Department, etc.). Individual heating systems can fit any type of building. ο.).

Principle of operation of the automatic air vent valve

These devices can have different designs, but the basic idea behind how they work is always the same. The apparatus is a hollow cylinder made up of an upper and a lower part. They are joined together with threads, and a rubber (silicone) sealing ring makes sure they are tight. At the top of the float is a small hollow cylindrical protrusion. The air exits the system through this protrusion. The plastic (polypropylene) cap is screwed onto a thread on it. If needed, this cap can be tightened to stop the air from leaking.

One of the tools is easy to use and efficient.

The work of the automatic air valve is based on the buoyancy of the float placed inside it. The float is connected to a rod, which acts on a spring-loaded spool that closes the outlet opening. If there is no air in the system, the air vent body is filled with coolant, the float is upwards. In this position, the rod supports the spool, and air does not escape (and does not enter). If there is air in the system, the coolant is gradually displaced and the float moves downwards. The rod does not press on the spool as much and the spring opens the outlet opening. The accumulated gas escapes, the body is filled with coolant again, the valve closes.

A model featuring an intricate spring-loaded air release mechanism

Types of automatic air vents and their installation

There are specific radiator-specific models of these valves, which can be straight or angled. On radiators, specialized or angular modifications are more frequently installed. If the radiator manifold’s diameter permits, they are installed via an adapter or screwed into it.

Whichever kind it is, the appliance must be installed with the outlet opening (cap) facing upward. Two methods exist for installation:

  • screw directly into the thread of the appropriate size;
  • first place the shut-off valve and then screw the air vent into it.

  • Use an ordinary wrench. It is not possible to use a wrench: it is difficult to control the applied force.
  • Held by a hexagon located under the cylinder. Do not hold on to the housing: you could break it.

Manual method of venting batteries

And still more often on radiators put manual models. And the most common of them is the "Mayevsky" tap. It is a small, simple and effective device. It is also called a needle air vent valve. It is a metal washer with a thread around the circumference. The washer has a through cone-shaped hole with a thread. The diameter of the hole is very small. On one side 1-1,5 mm (towards the radiator) and about 5 mm on the other side. Scheme of the "Maevsky" valve A shut-off cylinder is screwed into the hole, which is also threaded. When closed, it completely shuts off the flow of coolant. The cylinder is unscrewed, the cone is lifted, and the hole is opened. If gases have accumulated in the radiator, they come out. If there are no gases, the coolant comes out. But there can"t be a lot of air: a hole with a diameter of 1 mm won"t let much air out. In some models a plastic disk with a drain hole is attached to the body (diameter also about 1 mm). This disk can be freely rotated around a horizontal axis, allowing the drain hole to be set to a convenient position.

How to use the tap "Mayevsky"

If you have collected air in the radiator, you need to take a special key (a small piece of plastic, which comes in each set) or an ordinary screwdriver. Insert it into the slot on the vent disk, and turn it one/two turns counterclockwise. A hissing sound will be heard – this is through a small hole next to the disk, air begins to escape. Gradually, water starts to come out along with the air (the stream is very thin, don"t be frightened). When the stream becomes solid, close the faucet by turning the key (screwdriver) in the opposite direction. This procedure is usually required at system start-up, and from time to time throughout the year. After the end of the heating season it is also necessary to check the presence of gases – it is forbidden to drain the coolant, as the internal surface of the radiator corrodes very quickly "dry". And as the coolant remains in the radiator, the reactions continue to occur. What you can do to remember to bleed the air is to turn the faucet a little after turning off the batteries. Then there will be a small hole through which water (coolant) will not flow without pressure, and the gases will be vented little by little.

Another version of the manual air vent

This valve is produced by the same companies as the automatic ones. Here, too, there is a cone, but the design of the device is somewhat different. In addition, there is a handle. It is, of course, more convenient to use than a key. The principle of operation is similar: turn in one direction, the cone moves away from the hole, the air escapes. Turned in the opposite direction, close the hole. This is another manual air vent. It also has a shut-off cone, but of a slightly different shape. The price of the valve "Maevsky" 1,2-1,5 $, manual valves of another type – from 2$. How much the most expensive can cost, it is difficult to say, but there are models "under the antique", which offer to buy for 20$.

How to install manual models

The "Maevsky" valve is screwed into the adapter. Usually there are no problems with the selection of diameters, as this device comes in the installation kit for radiators. Only when assembling it is necessary to remember that if you put it on the radiator on the left, you must first screw the air vent into the adapter, tighten the thread (with an ordinary wrench, without applying excessive force). After that, the assembly can be screwed into the collector. The whole installation. Another version of the manual device is installed no more complicated. The process is the same as when installing an automatic one. In this case, it is also desirable to install in a pair with a shut-off valve (the valve "Maevsky" without stopping the system can not be removed). If you mount with a valve, it is the valve that you screw into the adapter from the mounting kit. Then you put this assembly on the radiator. And then you can screw an air vent into the installed valve. Sometimes winding is screwed onto the threads to ensure a tight seal. Only a lot of it is not necessary to wind it, and paint can not be used. It is better to take some sealant (it is possible to use only sealant). In properly designed systems for venting of air from radiators it is quite enough to install manual water voduho ventilators. If gases accumulate regularly, it is easier to install automatic devices, and not to constantly check whether the radiators are heating or it is time to vent the accumulated gases.

Air can occasionally build up in heating systems. It needs to be removed because it prevents the system from operating normally. Air vents are available for this use. They can be either automatic or manual. Read the post to learn how to collaborate with them. The website

Heating, water supply and sewerage in the apartment and house with your own hands

Master heating installer

By installing an automatic tap Maevsky, you can greatly simplify the process of bleeding radiators and preserving your home’s ideal insulation and heating. By automating the process of freeing trapped air from radiators, this cutting-edge gadget ensures that your home is heated evenly and effectively.

The automatic tap Maevsky’s capacity to help homeowners save time and effort is one of its main advantages. Rather than requiring a laborious and time-consuming manual bleeding procedure for every radiator, the Maevsky tap’s integrated mechanism automates the process. This frees homeowners to concentrate on other duties by resulting in quicker and less hassle maintenance routines.

Additionally, the Maevsky tap helps to eliminate air pockets from radiators, which furthers energy efficiency. The flow of hot water can be impeded and the heating system’s overall efficiency can be decreased when air gets trapped in the system. The Maevsky tap makes sure radiators run as efficiently as possible by automatically releasing trapped air, which eventually results in lower energy costs and a cozier living space.

Furthermore, the automatic tap Maevsky’s convenience goes beyond its usefulness. Because of its user-friendly design, homeowners with varying skill levels can utilize it without the need for specialized tools or expert assistance. Anyone can take advantage of the hassle-free advantages of enhanced heating performance with easy installation and operation.

To sum up, the Maevsky automatic tap provides a workable way to keep your house’s insulation and heating at their ideal levels. This creative gadget offers homeowners convenience and peace of mind by making the process of bleeding radiators simpler and encouraging energy efficiency. The Maevsky tap is a useful addition to any home heating system because of its simple design and time-saving features.

Video on the topic

Manual vent adapter and TOP-5 more radiator tuning products!

What type of heating you would like to have in your home?
Share to friends
Sergey Ivanov

I like to help people create comfort and comfort in their homes. I share my experience and knowledge in articles so that you can make the right choice of a heating and insulation system for your home.

Rate author
Add a comment