6 methods of heating of the frame house

Making a cozy and comfortable living space is a top priority for homeowners, especially in the winter, when it comes to heating a frame house efficiently. With so many different heating techniques available, it’s critical to know your options and select the one that best fits your needs and budget. This post will discuss six efficient frame house heating techniques, from conventional to cutting-edge methods.

A central heating system is one of the most popular ways to heat a frame home. This system usually generates heat in a boiler or furnace and uses pipes or ducts to distribute it throughout the house. Larger homes with several living areas benefit greatly from central heating since it consistently provides warmth to every space. It offers flexibility based on availability and cost as it can run on a variety of fuels, such as electricity, propane, natural gas, or oil.

Installing a geothermal heat pump is an option for anyone looking for a heating solution that is less harmful to the environment. This cutting-edge technology effectively heats your home by harnessing the natural heat of the earth. Geothermal heat pumps utilise stable subsurface temperatures to deliver year-round heating while substantially lowering energy usage and greenhouse gas emissions. Even though there might be a higher upfront installation cost, the long-term energy bill savings make it an investment worth doing.

If you’d rather take a more conventional route, a wood-burning fireplace or stove can give your frame home charm and coziness. Wood stoves effectively burn firewood to generate radiant heat, which warms any space. They can be used as a primary or supplemental heating source, and they are especially well-liked in rural areas where firewood is easily accessible. Additionally, for increased efficiency and safety, contemporary wood stoves are built with cutting-edge features.

Radiant floor heating is another common heating technique for frame homes. With this system, heating elements are placed beneath the floor and radiate heat upward to heat the space. Even heat distribution is achieved with radiant floor heating, which does away with the cold spots that are frequently present with conventional heating systems. Additionally, it can be used with a variety of flooring types, such as laminate, hardwood, and tile, giving homeowners a flexible choice.

Electric baseboard heaters are a practical and economical heating option for individuals seeking one. These electric heaters are mounted along each room’s baseboards and provide heat. With the accurate temperature control provided by electric baseboard heaters, you can customize the warmth in each room to suit your tastes. They’re a popular option for smaller frame homes or as additional heating because they’re also reasonably simple to install and require little upkeep.

Last but not least, if you want to heat your frame home, think about getting a ductless mini-split system. This cutting-edge heating technology consists of refrigerant lines connecting an outdoor compressor unit to indoor air-handling units. Zoned heating is a feature of ductless mini-split systems that lets you regulate the temperature in each room separately. They are particularly well-suited for homes without existing ductwork because they are extremely energy-efficient and offer significant cost savings when compared to traditional heating systems.

The main problem of heating frame houses

The truth is that these kinds of buildings lose a lot of heat because of the holes in the walls and the racks that extend from the beam in certain places. Consequently, this results in higher heating costs for the frame home.

However, a modern thermal insulation system, either external or internal, and multi-chamber windows made of wood, plastic, or metal can help to mitigate this issue to some extent. This method can help to minimize heat loss. You’ll then be able to choose from practically any type of heating system.

The main recommendations for heating the frame house

If the frame house’s power supply is operating without issue, but thermal losses are astronomically high—perhaps as a result of T.h. The selection of forced circulation radiator heating systems (with a pump) is advised due to several design and construction errors.

It is best to stop making decisions regarding the frame house’s heating system if there are power supply interruptions. Here, the temperature differential alone causes the coolant to move (i.e., the pump is not used). Although this heating system is more expensive and has lower efficiency, it is appropriate for homes without gas or electricity.

These frame house heating systems, in any arrangement, offer:

  • installation of a complex of radiators under window openings and near the outer doors;
  • installation of the necessary connecting elements (from collectors and metal -plastic pipes). They can be comfortably hidden on the inner surfaces (for example, under a falsity with a ceiling, under a falsity with a wall or under the floor). If the owner of the frame house has decided on the equipment of the heating system already in the construction process, then the corresponding connecting elements can be laid directly in the frame;
  • The use of various coolants. When water is used as the main coolant, in the winter, it is necessary to use special antifreeze to eliminate the risk of defrosting the heating system.

There are six efficient ways to think about when heating a frame home. Each approach has pros and cons of its own, ranging from more conventional choices like wood stoves and fireplaces to more contemporary ones like radiant floor heating and heat pumps. Homeowners can make well-informed decisions based on their unique requirements, financial constraints, and environmental preferences by being aware of these techniques. Whether affordability, sustainability, or convenience are your top priorities, there is a heating option to keep your frame home warm and comfortable all year round.

Water warm floor in a frame house

If the thermal insulation system of the frame house is effective, thermal losses can reach up to 100 watts. 1 m.2), water floor systems can be used to arrange the heating of the frame house. This convenience occurs in the event that the heating system:

  • provides power similar to thermal losses of the house (up to 100 watts. 1 m.2);
  • does not create problems of energy supply. When choosing such a heating system, you should pay attention to its energy dependence. This is due to the need for a warm floor for constant forced circulation (provided by pumps). That is why this option is not suitable for houses where power supply is carried out with interruptions.

These days, the following kinds of warm floor frame heating systems are available:

  1. Combined type. It is ideal for a frame house standing on a monolithic foundation made of reinforced concrete. So, for 1 floors, an exclusively concrete system of a warm floor is used (laying on a concrete screed) and nasty for 2 floors (for example, laying pipes on aluminum plates with a polystyrene system).

The warm floor is installed on the ground floor using the following guidelines:

  • First waterproofing. The usual polyethylene will come down
  • Then the damping tape around the perimeter of the walls
  • After polystyrene foam with a density of 30 kg per cubic meter and 5 cm high
  • Next, the pipe is laid
  • And a screed 5 cm high from the top of the pipe is poured

This strategy will ensure adequate heating for the ground floor of the frame house.

  1. Nastil type designed for a frame house standing on piles. Here it is possible to lay pipes on aluminum plates with a polystyrene system, on lags or ordinary black floor (wooden).


It should be mentioned that additional thermal insulation in the form of mats (made of technical cork, aerated concrete, polystyrene foam, etc.) is required for floor heating systems. In fact, this leaves a 50 mm free gap, allowing you to install nearly the whole frame house heating system, including the main pipes (up to 32 ppo. in isolation) and metal-polymer pipelines, collectors, fittings, and fasteners.

Combined heating systems

Thermal losses for a frame house are marginally greater than 100 watts. 1 m.2 may be suitable for a combination of any of the above-discussed floor heating system options with a radiator type. The radiator system will bear the cost of providing the primary thermal load; nevertheless, there will be further benefits.

  • the effect of comfortable (warm) floor;
  • uniform heat distribution;
  • High economy in automatic regulation.

Heating by convectors

The frame house can also be warmed by using electric and water convectors. We obtain the same wiring as with radiators by using water convectors.

Characteristics of the water convector heating system in the frame house:

  • The room is heated very quickly. After 5 minutes it is already warm
  • The room also cools very quickly in view of the quick heat removal
  • The temperature changes very quickly if you use adjustment
  • Through the use of convectors, you can use weather dependent automation.

Everything is much simpler when using electric convectors for heating. You figure out how much heat the frame house loses in each room and then use power to choose the desired device. Activate the convector that supplies heat to the network.

Electrical convectors require a lot of electricity to operate. based on its capacities and availability. Additionally, the cost of electricity is often prohibitively high. Remember that. Convectors are reasonably priced, though.

Air heating

If preferred, air heating is another option for warming the frame house. Among the benefits of a system like this, you can mention:

  • Fast reaction to temperature change
  • Fast warming up
  • No heating devices on the walls

Cons of the frame house’s air heating system:

  • The system is expensive
  • Constant noise when working
  • Often occupies excess height under the ceiling

We will continue to advise against using the frame house’s water heating system.

Method Description
1. Insulated Concrete Forms (ICF) ICF uses polystyrene foam blocks filled with concrete to create a highly insulated and durable structure.
2. Radiant Floor Heating This method involves installing pipes or electric heating elements under the floor to radiate heat upwards, providing even warmth.
3. Solar Heating Utilizing solar panels or collectors to capture sunlight and convert it into heat for warming the house.
4. Geothermal Heating Using the stable temperature of the earth to heat the house through a system of pipes buried underground.
5. Wood Stoves or Pellet Stoves Burning wood or pellets in a stove to generate heat, which can be distributed throughout the house.
6. Heat Pumps Heat pumps transfer heat from one place to another, either extracting heat from the air or ground to warm the house.

For comfort and energy efficiency in your frame home, selecting the appropriate heating system is essential. There are many options available, so it’s important to think about things like cost, convenience, and environmental impact. Through an examination of six distinct heating techniques, homeowners can make well-informed decisions customized to their individual requirements.

Radiant floor heating is a common technique that uses pipes buried beneath the floor to circulate heated water to create a constant temperature. This system maximizes usable space in the house by providing comfortable heat distribution without requiring large radiators or ductwork. Furthermore, radiant floor heating is flexible and efficient because it can be powered by a variety of energy sources, such as electricity, natural gas, or renewable energy.

Solar heating offers a sustainable solution that uses the sun’s energy to heat a home, making it an appealing choice for those looking for environmentally friendly options. The heat produced by the solar panels on the roof can be used by an air-based or hydronic system to distribute heat throughout the house. Over time, solar heating can drastically lower utility bills and lessen dependency on non-renewable energy sources, even though the initial investment may be higher.

Geothermal heating is another effective heating technique that warms a house by drawing on the natural heat that is stored beneath the surface of the Earth. Geothermal systems take heat from the earth and move it indoors in the winter by pumping fluid through subterranean pipes. This method offers reliable heating all year round while lowering carbon emissions and running expenses. It is also very eco-friendly and energy-efficient.

For frame homes, wood stoves and pellet stoves offer a dependable source of heat and a rustic charm, particularly in places where firewood or wood pellets are easily accessible. These heating appliances provide backup heat during blackouts by burning wood or biomass fuel to create a warm and comfortable atmosphere. To avoid fire risks and preserve indoor air quality, it is crucial to make sure that adequate ventilation is in place and to adhere to safety regulations.

Heat pumps are a useful option for homeowners looking for year-round heating and cooling for their frame house if they value convenience and adaptability. During the winter, these gadgets take heat from the ground, water, or air and bring it inside to warm the house. Heat pumps can reverse the process to provide cooling in the summer, making them a year-round energy-efficient option.

In conclusion, conventional heating systems like gas furnaces or electric heaters continue to be well-liked choices for frame homes due to their consistent performance and accessibility. Electric heaters use electricity to create heat, whereas gas furnaces use propane or natural gas to do the same. These techniques don’t have the same environmental appeal as renewable energy systems, but they still offer reliable heating at a reasonable price, so many homeowners can find them to be good options.

To sum up, the heating system you select for your frame home should be in line with your priorities regarding affordability, effectiveness, sustainability, and comfort. You can choose the best heating system to keep your house warm and comfortable for many years to come by weighing the advantages and disadvantages of each choice and taking into account variables like upfront costs, long-term savings, and environmental impact.

Video on the topic

Frame house in winter (can you live in such a house) Warmos 6kW electric boots

How to build a warm frame house? / 5 Rules for building a frame house

An effective and inexpensive heating system of a frame house with an area of 126 square meters.m.

How to warm frame houses in Finland? / How is the wall of the wall of the frame house?

What type of heating you would like to have in your home?
Share to friends
Anna Vasilieva
Rate author
Add a comment